Media pending with adjustement layer CC 2014

Hi,
I have so many problem with adobe premiere pro CC 2014
- Media pending with adjustment layer track and some Red giant effects on it. Impossible to rendering ! Please, what the problem ?
- I loose sound sometimes during playback, I can not hear anything.
- Sound make a big noise sometimes, like a 1khz but not exactly. It appears when I go up the volume after adding gain or push up the volume in effect control.
Have you got solutions please ?
Thank you

>What to do?
Start by asking in a forum that is specific to your program... what program are you talking about?
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Similar Messages

Media pending with Encore CS6

Hello,
I have a very large project built with Premiere Pro CC.
The project has 5 "sequences" which are "rendered" before export to Media Encoder CC.
The "transcode" (max quality) runs very well but is very slow (Media Encoder does not use GPU even the "Playback Mercury Engine" is activated), this is worst without Playback Mercury Engine.
The transcoded files are imported within Encore CS6 (no dynamic link between Encore CS6 ane PP CC and no Encore CC version, Adobe decided this but with very bad reasons).
The Encore project has 5 "montages" and one "diffusion list", the menu has "animated" buttons and need to be rendered before creating the final disk (blu-ray).
But when I try the menus before creating the blu-ray disk I obtain :
- media pending message : the audio track is there but the video track appears lated and is not smooth,
- the animated button of menus are very curious : some are correct but others flash in red or green.
- the software Encore freeze with a white screen, then the job may be resume,
- the "complete title" begins normally then the video disappears but not the audio, after 10 seconds the video appears but seems to be frozen.
I checked the links of chapters and buttons, all works normally. The project checking give no error.
I never encountered this with Premiere Pro CS6 and Encore CS6 (dynamic link works).
How can I fix this strange situation without discarding PP CC and migrate to FCPX ?

Hello,
Many thanks for your very long reply and your interest in my problems.
I shall try to answer you :
- 1) OS : Windows 7 64 bits Pro SP1, french,
                 Version : 6.1.7601.18247 (Win7RTM)
                 Framework.NET : 4.0.30319.18408 built by : FX451RTMGREL)
                 DirectX : 11.0,
                 OpenGL : 6.1.7600.16385 (Win7_rtm.090713-1255).
- 2) Yes the media pending goes away but after a couple of minutes (one
year ago I was using PP CS6 and Encore CS6, I never had this problem
even with very long files),
- 3) Yes my GPU driver is updated (Nvidia GeForce 332.21 dated 12/19/2014).
I never had thiese problems with PP CS6 + Encore CS6 and my projects
built with these PP ans Encore version were with the same structure and
length (in PP CS6 : sequences up to 45 minutes, in Encore CS6 chapters
up to the same time).
The difference between are in my hardware :
- the RAM was upgraded from 12 GB to 24 GB,
- the CPU was overclocked from 3,2 GHz (default) to 3,88 GHz).
- 4) I shall try up to the disk burn to check if the problem is just due
to display of "animated buttons".
I hope my answer will be usefull for you.
Regards,
Jacques Gourier.
Le 11/02/2014 19:53, Stan Jones a écrit :
>
      Re: Media pending with Encore CS6
created by Stan Jones <http://forums.adobe.com/people/Stan+Jones> in
/Encore/ - View the full discussion
<http://forums.adobe.com/message/6110278#6110278

Changing skin tones with adjustment layer fails

Hi,
I am running PS CC 2014 and all I want to do is to adjust a skin tone to match it to the rest of the bodys skin color.
I have watched some videos on YouTube but my PS doesnt seem to work that way and I wonder why.
My workflow:
Copy background layer.
Quick select area of body where skin tone has to be changed
(If necessary: improve selection)
Now create adjustment layer with gradiation curve
Select with double click midtone pipette and select one point of the "good skin tone" (also pressing CTRL at the same time when selecting it)
Confirm with OK.
Reject box which wants to take over skin tone as standard color.
Click with pipette in the previously selected skin area which has to be changed.
Instead of adjusting the color into a good skin color, this area turns into a strange orange color.
All I can do now is to walk through the single RGB channels to makle adjustments and hope to get anywhere
near the expected result.
Where have I gone wrong ? Where does the orange color come from ?
Any proposals how to get to a reasonable result ?
Preferably with this workflow. But all other ideas are welcome, too.
Thx.
Arnold.

For what it's worth: I have found that when sculptural modeling is involved, such as the in the hand, working with Curves in LAB (where tone is discrete from color) produces the color change more naturally and provides greater control over local contrast. You may want to consider that alternate approach. In this sample, the left forearm provided the reference color and I chose to lighten the tonal scale a bit.
One off-topic comment: A shorter than normal focal length lens creates a foreshortening that makes near objects disproportionately large in relation to the rest of the object or scene. In this instance, consider its effect on the hand-head sizes. I would suggest that a focal length at least 1 1/2 times normal would be more appropriate.
Good luck.

Removing a portion of a layer with Adjustment Layer?

My brain isn't working too well today. How would I go about removing a portion of a image using Adjustment Layers?
I can't alter the opacity of layers below an Adjustment Layer using that Adjustment Layer can I?

[I can't alter the opacity of layers below an Adjustment Layer using that Adjustment Layer can I?]
Yes, if you apply AE's native "Transform" filter to the adjustment layer and keyframe the opacity.
It's not really using an adjustment layer, but similarly you could also remove a portion of an image without directly editing that image layer by using asolid above it masked to the shape you need as a track matte ... or even with stencil/silhouette alpha blending modes.
BTW, it makes me feel better to know I'm not the only one whose brain just flat out stops working at times and I have to go to the forums and ask how to do things I've done a million times. ;~)

CS4 - Color Sampler readout with Adjustment Layer selected?

I'm not sure if this is a setting, or a bug, or the way adobe intended it, but perhaps some of you may know.
In Photoshop CS4, I have a few color samplers around the stage. I notice that the color readouts require that I make some adjustments using a curves layer. I add the curves adjustment layer and start to make adjustments. The only problem is that while I have an adjustment layer selected (so I can make changes to it) my color sampler readouts in the info panel display blank.
In previous version of photoshop this was not the case as you could open the adjustment dialog without actually having that adjustment layer selected. I love the new adjustment layer panel, but its really frustrating having to make some changes to an adjustment layer and then select another layer to see what those changes did to the color samplers, and back and forth, and back and forth.
Does anyone have a fix for this? Is it a bug? Is there a reason that CS4 functions this way?

I'm not sure if this is a setting, or a bug, or the way adobe intended it, but perhaps some of you may know.
In Photoshop CS4, I have a few color samplers around the stage. I notice that the color readouts require that I make some adjustments using a curves layer. I add the curves adjustment layer and start to make adjustments. The only problem is that while I have an adjustment layer selected (so I can make changes to it) my color sampler readouts in the info panel display blank.
In previous version of photoshop this was not the case as you could open the adjustment dialog without actually having that adjustment layer selected. I love the new adjustment layer panel, but its really frustrating having to make some changes to an adjustment layer and then select another layer to see what those changes did to the color samplers, and back and forth, and back and forth.
Does anyone have a fix for this? Is it a bug? Is there a reason that CS4 functions this way?

MOTION TRACKING PROBLEM WITH ADJUSTMENT LAYER

Hi.
I'm trying to blur out a logo on a shoe, but I'm having some difficulty getting the tracker to stick to the logo. Can someone help me, please. Here are the steps I took:
1. I used Tracker to track a logo that I want to blur out.
2. After analyzing the layer, I went back to check the attach point frame by frame The attach point is centred perfectly on the logo on every frame.
3. Then, I added an adjustment layer, and used the pick whip to ensure that the position of the adjustment layer is the same as the attach point position from the tracker.
4. On the adjustment layer, I created an ellipse mask, applied a gaussian blur. But when I do playback, the ellipse mask is all over the place and not sticking to the logo.
Does anyone have an idea as to what I'm doing wrong? Any advice would be appreciated. Thanks, in advance.
2010 Mac Pro. After Effects CS5. Snow Leopard 10.6.6.

To start off I always apply tracking data to a null then parent the null to the layers that should follow the track.
Make sure that you have picked the right target. Make sure that you've picked the right options. You should be using Transform as the track type. You should also do a quick Google search. There are a bunch of tracking tutorials out there.
If your null follows the object then you can parent the adjustment layer to the null. That should do it.

Found Fix for "Media Pending" with MPEG Videos (after 4 years)

This is for Premiere CS3.
Very often, if you make any changes to your system, or move files around, Premiere can lose track of the database that keeps track of MPEG2 video clips. The result is a persistent Media Pending display instead of your video. Cleaning the Media Cache doesn't fix it. Deleting all the temp folder media cache doesn't either. Here's what I found that works:
Go into this folder:
C:\Documents and Settings\<User Name>\Application Data\Adobe\Premiere Pro\3.0\MediaIO\Cache
The <User Name> will be your login name of the Windows account.
Delete all the files that are in this folder.
Restart Premiere and watch it re index your video and your video reapear again.
Took me FOUR YEARS to discover this one on my own!

This is for Premiere CS3.
Very often, if you make any changes to your system, or move files around, Premiere can lose track of the database that keeps track of MPEG2 video clips. The result is a persistent Media Pending display instead of your video. Cleaning the Media Cache doesn't fix it. Deleting all the temp folder media cache doesn't either. Here's what I found that works:
Go into this folder:
C:\Documents and Settings\<User Name>\Application Data\Adobe\Premiere Pro\3.0\MediaIO\Cache
The <User Name> will be your login name of the Windows account.
Delete all the files that are in this folder.
Restart Premiere and watch it re index your video and your video reapear again.
Took me FOUR YEARS to discover this one on my own!

Media Pending with Adobe Premiere Pro CS4

First of all guys, I know this is not a brand new issue but please help me out as am providing details. Thank you.
I have JVC Everio jvc everio gz-hd5 60GB camcorder. As you probably know that it records file into .TOD format, I converted them into .MPG format. This is how I am importing to Adobe Premiere Pro CS4 before it's showing me golden little screen displaying PENDING MEDIA forever.
1. Import -> new project
2. Capture format -> HDV
3. Available Preset -> HDV108030p
Operating system detail
Microsoft XP Pro Version 2002 Service pack 3
2.19 GHZ, 1.99GB RAM, Intel core 2 duo CPU
p.s - I read some forums but the way they explained is too confusing.

I dont think I have enough info about your computers and hard drives and so on to tell if you can really edit HD stuff , but at this point you should really convert the TOD file first anyway. I don't think just renaming the extension will make it work OK, but I found some info on the internet that might help you convert to a more editor friendly format...
Standard definition video is stored in MPEG program stream container files with MOD extension; in most other systems these files have extension MPG or MPEG. High definition video is stored in MPEG transport stream container files with TOD extension; in most other systems these files have M2T extension.[2] Transport stream files can be converted into more common program stream files without recompressing the video itself. For example, FFmpeg, a free software program, performs the conversion on Windows and Linux systems with the following command: ffmpeg -i myclip.TOD -acodec copy -vcodec copy myclip.mpg. Software, included with TOD camcorders, performs this conversion as part of capture process. A similar command is used for MOD files: ffmpeg -i myClip.MOD -vcodec copy -acodec ac3 -ab 384k myClip.mpg -acodec mp2 -ab 192k -newaudio.
You Gspot screenshot is good, and it shows that it doesn't recognize anything about the codec and codec name..the right side of the GSpot is usually full of information about the video file...like the frame size, FPS , aspect ratio, and so on. As you can see from the above paragraph you would probably benefit from converting the TOD file using FFmpeg or some other program like streamclip ( also free program )
That's your first step I think...
You will have to know what your video file is...from the camera manual you can find out the frame size and fps used, whether it is progressive or interlaced, etc... The reason you will need to know about your video file is because when you open the TOD file in a program like streamclip to convert it, you will want to convert it to basically the same specs, but with as a different "codec" and file type....but keep the same video characteristics as the original.

Slow/unresponsive video playback, media pending, after CC'14 October update

Encountering a strange issue after the October update. It's a project carried over from the previous CC'14 version, nothing crazy, about an 18 minute timeline of video/.mov clips straight off a JVC GY-HM600U with simple RGB curves/masks on some clips, some Prores422 clips of graphics exported out of After Effects, a couple nested sequences featuring simple text w/ cross dissolves, and a lower 3rd Quicktime with RGB+Alpha. There are some linked AE comps in the project but not in the sequence. Ran fine before update. Here's my system, obviously no CUDA so Mercury Playback is software only:
Upon opening the project everything is fine, playback is smooth, scrubbing from beginning to end no problem. After a period of time, 10-15 minutes? Suddenly video playback hangs up, with audio continuing to play after . Opening a clip in the Source window displays the Media Pending thumbnail, after 15 seconds it seems to find the media but again it's only a still frame with video hanging up. Then audio seems to hang up and I can't do anything. I can still manipulate the UI but scrubbing through the timeline is completely unresponsive, pressing play does nothing.
Quitting the program seems to freeze it, the window closes but it stays lit up in my dock and shows Application Not Responding, causing me to force quit.
A system reboot yesterday seemed to clear the issue up for the remainder of the work day but it's back today. Not sure where the issue is coming from, but seems like some kind of memory leak or something similar since it seems to be a gradual degradation in performance. I'll have to roll back to a previous version to finish up this project until things are fixed.

Hello,
Many thanks for your very long reply and your interest in my problems.
I shall try to answer you :
- 1) OS : Windows 7 64 bits Pro SP1, french,
                 Version : 6.1.7601.18247 (Win7RTM)
                 Framework.NET : 4.0.30319.18408 built by : FX451RTMGREL)
                 DirectX : 11.0,
                 OpenGL : 6.1.7600.16385 (Win7_rtm.090713-1255).
- 2) Yes the media pending goes away but after a couple of minutes (one
year ago I was using PP CS6 and Encore CS6, I never had this problem
even with very long files),
- 3) Yes my GPU driver is updated (Nvidia GeForce 332.21 dated 12/19/2014).
I never had thiese problems with PP CS6 + Encore CS6 and my projects
built with these PP ans Encore version were with the same structure and
length (in PP CS6 : sequences up to 45 minutes, in Encore CS6 chapters
up to the same time).
The difference between are in my hardware :
- the RAM was upgraded from 12 GB to 24 GB,
- the CPU was overclocked from 3,2 GHz (default) to 3,88 GHz).
- 4) I shall try up to the disk burn to check if the problem is just due
to display of "animated buttons".
I hope my answer will be usefull for you.
Regards,
Jacques Gourier.
Le 11/02/2014 19:53, Stan Jones a écrit :
>
      Re: Media pending with Encore CS6
created by Stan Jones <http://forums.adobe.com/people/Stan+Jones> in
/Encore/ - View the full discussion
<http://forums.adobe.com/message/6110278#6110278

Cc opacity keyframe on black and white adjustment layer doesn't work

hi
i use premiere cc under w8.1 pro
well i noticed a strange behavior
i added an adjustament layer , black and white effect , and several keyframes
seems that premiere reads only the first one
for example
1) keyframe -> @0% the second keyframe @100% the video is all in color ,doesn't matter how many keyframes i add
2) first key @100% second @0% (opacity) the video is all in black and white , again doesn't matter how many keyframes i add , only the first is read
i tried the black and white effect , on video ,titles and so on and it works perfectly , it doesn't work on the adjustament layer
i tried others effects on adjustament layer and they work
is a bug ?
is there an known bug in prev. versions?
thanks

thanks i do it, saturation
but can't understand why this happen with adjustament layer only
may i know which cc version do you use?
sometime i think to buy c6 , i have cc subscription

In Photoshop CC (2014), Hue/Saturation adjustment layer properties disappear

I am running Photoshop CC (2014) under Windows 7 Professional. The program is up to date.
Today, while editing an 8-bit image, I added a Hue/Saturation adjustment layer. Then, in the properties panel for this layer, with the on-image adjustment tool selected, I clicked a color in the image to get a range of colors whose saturation I wanted to adjust. Next, using the saturation slider in the properties panel, I increased the saturation of this range of colors. Finally, I closed the properties panel by clicking on the double arrow in the upper right corner.
Later, I wanted to modify this adjustment layer. I double-clicked on the layer thumbnail to reopen the properties panel, and found that, although the previous increase in saturation was still operating, the saturation slider was back at its default position, and the range of colors that I had previously established was gone. Thus, I could not make further adjustments to this range of colors.
I then did some further experimentation: I deleted the first Hue/Saturation adjustment layer, and created a new Hue/Saturation adjustment layer. I then again established a range of colors as above, again increased the saturation of these colors, and then again closed the properties panel by clicking on the double arrow in the upper right corner. This time, however, when I wanted to try to modify this adjustment layer, instead of double-clicking on the layer thumbnail to reopen the properties panel, I right-clicked on the layer and then clicked on "Edit adjustment..." This opened the properties panel, which, this time, correctly showed my original adjustments -- the saturation slider showed the positive adjustment that I had previously made, and the range of colors established earlier was still shown. But then, on a hunch, I added a Curves adjustment layer above the Hue/Saturation adjustment layer. Now, when I again opened the properties panel of the Hue/Saturation adjustment layer (by right-clicking on the layer and then clicking on "Edit adjustment..."), my previous settings were gone -- the saturation slider was at its default position and the range of colors was gone! (But the increase in saturation was still operating.)
Thus, it appears that there is a bug in the functioning of the properties panel of the Hue/Saturation layer: In short, once you have added a further adjustment layer, you can't then go back and make changes to the properties of the Hue/Saturation layer. I would be interested to hear if others have noticed this. Also, is Adobe planning to address this?

OK, I am not entirely sure I have understood your post completely, but when you edit a colour range with a Hue/Sat layer, and click off and back on again, it will default to showing the RGB values, which you may not have made any adjustment to. If you pick the previous colour from the image, or a similar colour, it _will_ show you the adjustments. So long as your picked colour is contained within the range of the previous adjustment.
Ypu could also use the RGB drop down (actually they call it Master nowadays), and chose the colour that is closest to your previously picked colour. I expect you are away that you can edit the colour range being operated on by dragging the four sliders on the two colour bars at the bottom of the Properties panel.
Does that make sense, or am I going in the wrong direction?

Cross-dissolve from white frame to adjustment layer no longer works in CC 2014

Windows 7, Premiere Pro CC 2014
I have a video clip in a nested sequence on V1 and an adjustment layer on V2.
I want to dissolve from a white frame to the clip using the adjustment layer.
In PP CC (not 2014) this was simple:
Starting with a white PNG graphic on V2, cross-dissolve to the adjustment layer.
However, in PP CC 2014, this causes a dissolve to BLACK over the duration of the dissolve and then a CUT to the video.
This behavior in CC 2014 is illogical. Why has it changed?
There are other ways to do this, but this one was quick and easy, and is required for hundreds of clips in existing sequences / projects.
Response from support via live chat:
thank you for your patience
the adjustment is layer is not functioning properly
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
please mention it in the feature/bug request form

For me with a color matte it shows exactly the same behavior as with a PNG.
You're dissolving between the matte and the adjustment layer on V2?

Premiere Pro CC 2014 gets stuck on Media Pending.

Hi there,
I've been having a bit of trouble with PPCC 2014 opening projects then getting stuck with all my footage and assets and after effects comps just displaying with 'Media Pending'. The program still works, opens, and I can save and click around so it's not crashing but nothing loads unless I force it to relink which obviously isn't great when I'm having to edit multiple large projects. These projects still open just fine on regular old Premiere Pro CC so I will continue using that for the time being.
Media Encoder is also having an issue with After Effects comps that are in Premiere Pro timelines and only display as 'Media Pending'.
Fortunately all these issues go away if I reboot my machine and try again straight away, but having to reboot my mac just to open a project or do a export isn't exactly preferable.
I have a Mac Pro (late 2013) with 10.9.4 with 16gb Ram and a AMD D500 3GB card.
I'm just wondering if anyone has been suffering with the same issues and has come across any fixes.
Thanks in advance.

Here is my post from another thread concerning the same issue:
I got through Adobe to connect to me remotely to solve this problem twice. They cleaned the cache and preferences and renamed my Adobe folder under applications (don't exactly know how thy did it.) The problem disappeared only to come back after a little while. No video playback, unresponsive buttons - but playable audio, and media pending for all clips. I told them to report this to tech support. This was about a month ago but no updates still..I know I hadn't had this issue neither with CS6 nor with CC.
I am currently rendering my project after changing the sequence's editing mode to Quicktime ProRes Proxy to see if it will help. Preview is still preview but as you said maybe the issue is to be with preview settings set to i-frame mpeg. I have read about the mpeg importer plugin to be an issue in previous versions of premiere pro concerning issues with media pending but i might be wrong.
After changing the sequence settings to Prores Proxy (or if you don't have these codecs installed you may try another codec or google "Prores codec install" and have them installed) the problem cleared away. I have looped the timeline and played it over and over for a couple of hours without the issue surfacing.
For Adobe support and for others to know here is a wiki concerning the issue in CS5. FAQ:Why does my clip show as "media pending"? - Adobe Premiere Pro

[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
Photoshop cc 2014
windows does not work
mac does work
Did you already post over here:
[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

The eyedropper tool does not work with a hue saturation adjustment layer

I am using PS CC 2014, and the problem I am having is that when I want to use the eyedropper tool to adjust the colour range affected by a Hue/Saturation adjustment layer, rather than selecting the colour in the Properties window for the adjustment layer, use of the eyedropper closes the properties window and changes the foreground colour in my palette.
Here's the real hitch... the same thing happened to me at school last night where a) the Mac's are older and b) CS6 is still used.
It's something with my user settings, to be sure, because the prof logged into his account on the Mac I was using in class to test it out, and it worked for him; we logged back into my account and it still did not work for mine.
Any ideas?
Thanks for any insights.
RP

Indeed Trevor, that did solve the problem. Clearly it was something I changed... wish I knew what. But, I have a list of all the settings changes I made before, so I can figure it out by making one at a time then checking...
RP

Media pending with adjustement layer CC 2014

Similar Messages

Maybe you are looking for