Media presentation with details help.

Hi there I am currently implementing a simple media presentation with details and I struggle to do 2 things:
1. Buffer all videos so that after they load once they play from the memory not depending on a "let's say" faulty internet connection.
2. The most important thing that I was unable to figure out is how to make the chapter details play like 15 seconds after the video ends. I mean when de video ends the chapter pauses and displays the chapter details for 15 seconds.
Any help would be very appreciated. Thank you very much.

QuantumJourney wrote:
I am new to Mac - just got my matchbook pro a few months ago. 256G is half gone with a lot of pictures and documents that I have not looked at in years.
I am using back blaze as a back up source, but you can only restore files, you cannot access them.
I want to use iCloud as a means to put all my old pictures on and if I want to email one to a friend, I can select it from the cloud, put it in my email and send it without downloading it to my computer.
Not yet, photo's are currently not stored in iCloud.
QuantumJourney wrote:
I also want to store all my music in iCloud, purchased and uploaded but I don't see how to do that.
Music that you purchased is always available from iTunes Cloud (not iCloud), if you wish to extend that to music you uploaded to your iTunes library then you would use iTunes Match (limit 25,000 songs). Match is $25 per year.
Changes are coming to the iCloud service, so although this information is up to date, it won't be for long.

Similar Messages

  • Help please , Checking media presence , no media present !

    Hi , i have a gx70 , it arrived today and it wont boot up windows installation... I installed a second ssd before the first boot , i have windows on a cd and on a stick , i open the laptop , it appears Checking media presence . no media present, it gets me to bios menu , i choose the first boot option to be the flash , i boot again and it gets to to the same thing... Checking media presence ( I used this flash to install windows many times before , so its not the flash's fault) . Anyway , anything i do in bios it still gets me to Checking media presence blabla and the again in bios , i cant do anything please help. BTW WHAT IS THE POINT OF LEAVING A FREE SPACE FOR A SSD , BUT IF YOU WANT TO PUT IT THERE , YOU HAVE TO BRAKE THE WARRANTY MARK ! THAT'S PLAIN STUPID!

    OH , and yes , i installed the OS on the SSD From my pc , with the flash stick , and the put it in the laptop , in the boot menu i have only these strane things : USB cd/dvd , CD/DVD, USB KEY , Hard disk , USB hard disk , and network blalbal  . No SSD i mean , i tried all the options , and the same result , i even removed the HDD from the laptop and puted the SSD in there , In the boot menu the same things to chose from .... . And one more strange thing , if from the boot menu , i remove the network thing , when i am booting the laptop it skips the Checking media , and goes directly into the Bios , But still , no boot , if you want This is my skype id : REMOVED , you can add me , i have a webcam and i can show you the laptop , but mind the fact that i am not an english native so my english isnt really good

  • HELP for all 5 TYPES of  STO  Stock Transport Orders with detailed scenario

    PLEASE help me understanding the detailed scenarios for all 5 TYPES of STO s
    as in my day to day job activities , i frequently handles issues related to STO s
    PLEASE HELP WITH DETAILED STEP BY STEP SCENARIOS

    Hi Jagatram,
    Standard SAP has the following methods For Stock transport order:
    1) One Step Transfer stock without using purchasing documents; Use movement type 301.
    2) Two Step Transfer stock without using purchasing documents; Use movement type 303 in Supplying plant and movement type 305 in receiving plant.
    3) Using Standard Transport Order (STO) without delivery in two steps. STO created in T-Code ME27, receiving plant posts goods issue (for returns), movement type 351 and supplying plant post goods receipt from using movement type 101.
    4) Using Standard Transport Order (STO) with delivery in one step. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 647 and goods receipt document with movement type 101 both created in one step.
    5) Using Standard Transport Order (STO) with delivery in two steps. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue posted (for materials to be returned) with movement type 641.Goods receipt is posted in the supplying plant, movement type 101.
    6) Using Transportation scheduling agreement (TSA) with delivery in two steps. TSA created in T-Code ME37. Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 641. Goods receipt is posted in the supplying plant, movement type 101.
    To achieve it, necessary configurations has to be done in Tcode- OMGN.
    SPRO>> Materials management>> Purchasing>> Purchase Order>> Set up Stock transport Order:
    1. Plant: For the receiving plant, maintain customer No-Plant (If using STO with delivery), for the Sales Org, Dist channel and Division.
    2. Checking Rule: Create checking rule.
    3. Define checking rule : Usually no change required here.
    4. Assign delivery type/checking rule: Assign the document type(UB) - Supplying plant- Delivery type(NL).
    5. Purchasing document type: Maintain the supplying plant- Receiving plant relationships for the doc type-UB, either 1-step or 2-step, as per business.
    Hope this helps!
    Regards,
    Shilpa

  • Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

    Hi,
      I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder.  "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
    The files we're shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with still the same error.
    I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash.  I tried this twice....
        Thanks in Advance

    Hi Hunt,
           Here is the skinny.  A window base PC.  footage shot with HD sony HD cameras,  Project imported to Premiere CS3.  Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality.  Imported them to Adobe Encore CS3.  After about ten files or so.  I got the error message.  Did all the basic trouble shoot like restarting the computer, got latest patch.  Even build a new test project with the same problem.
        Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded.  So it will be a double compression and I dont want that.  So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
       what do you think ????
       Peter

  • Help, please! I am suddenly being presented with CYMK colors to 2 decimal points.  What did I accidentally change and how can I fix it?

    This is driving me crazy. I am suddenly being presented with CYMK colors to 2 decimal points.  Too much info for me.  What did I accidentally change and how can I fix it?  I've been through all of the preferences, views etc. I can find but no luck.  Thinking this has something to with the color settings (obviously) but with all of the possible options there I could use some help.  Thanks, all!

    May have been a switch from RGB to CMYK.
    Or you moved one of the sliders with shift key pressed.

  • Blackberry help! Can I access media manager with a mac?

    I just bought my pretty new blackberry yesterday and I already hate it Is it possible to use Media Manager with a mac? I'm using PocketMac but it doesn't give me the option of Media Manager. I'd like to be able to add music and pictures to my Blackberry. Let me know if this is possible!
    TIA for any help!

    You may want to look at the Missing Sync for Blackberry rather than Pocket Blackberry
    http://www.markspace.com/missingsync_blackberry.php

  • PLEASE HELP. URGENT- Creating a slide show presentation with music

    Good day. I would like to create a slide show presentation with music attached to it. i tried it once with a few pistures and it worked. now, i have around 3 hundred pictures and would like to create a slide show but unfortunately the same music keeps on playing over and over again. once the 1st music is done and there are still pictures to be shown, can i use another music title? how do i do this? please help....

    Place the individual music files into a new iTunes playlist. Choose it (not the individual files) by hitting the OK button.

  • Presenter 8 -- need help with proper settings to allow quiz retake (with a NEW set of questions from a random pool)

    We are publishing a Presenter 8 quiz to an LMS in a SCORM format.  I am having trouble with the following:  the quiz is built with multiple question groups, and a limited number of questions are being selected from each group.  E.g. we have 80+ questions in total, and 25 are presented to a user on a given attempt.
    When a user fails the quiz and exits the quiz normally, we want them to study and try again.  I set the quiz settings to allow infinite attempts, and set the LMS settings to make sure the quiz is not presented in "review mode".  When I test this quiz by failing it the first time, when I reenter the quiz, I am taken to the last slide in the quiz (which is the last one I viewed), and I can retake the quiz by navigating back to the first question.
    Here's the problem:  I am presented with the SAME set of questions, rather than a NEW set of random questions.  This will facilitate cheating (all a user has to do is take the quiz once, review the answers, and then take it again to pass it).
    How do I insure that the user is presented with a NEW set of questions when I retake the quiz?
    I am open to upgrading to Adobe Presenter 10, but would rather not have to do so.  There must be some setting I'm missing.
    Scott Richardson

    If you move a mailbox from one server to another, Outlook will automatically repair the Outlook profile.  Have you tried this, instead of trying to force a profile update using a PRF?

  • The iWork Public Beta allowed me to share Keynote presentations with anyone via the web. How can I share a Keynote presentation online via iCloud? Must the presentation be downloaded to view?

    The iWork Public Beta allowed me to share Keynote presentations with anyone via the web. Now Apple tells me the Public Beta is being replaced by iCloud. How can I share a Keynote presentation online via iCloud? Must the presentation be downloaded to view?

    iCloud is not designed for sharing data with other people: you will need a third-party alternative such as DropBox or Sugarsync.
    More details here (written for migrators from MobileMe but the basic information may be helpful):
    http://rfwilmut.net/migrate3

  • Premiere Elements 11 "No media present"

    I'm new to using Premiere Elements 11.  Everything was going smoothly until I tried to burn an AVCHD project to disc.  Got the message "No media present" which mean the burn button wasn't available.  I notice another discussion on this where the solution was to burn the project to a folder, then burn the DVD using a program ImgBurn. 
    (1) I'm not comfortable downloading this program (how do I know it's safe?).
    (2) I've got a brand new Toshiba laptop (12 GB)/Windows 8.  Everything is new and updated... Is there an Adobe fix to this problem?  Like a program patch???

    Jerry,
    No patches.
    ImgBurn does have some strange, but helping messages while it operates, but is a highly effective program. I have it on Windows 7 64 bit and Window 8 64 bit and have not had any problems with it over the course of several years. If you target the download button for ImgBurn, no problems. And, you control what gets installed once the dialogs appear.
    Back to Premiere Elements 11 AVCHD burn to DVD or Folder.
    Important questions:
    a. Putting aside the "after" and ImgBurn, can you get a successful Publish+Share/Disc/AVCHD with a burn to = Folder (4.7 GB)?
    b. In the case of the .../AVCHD with burn to = disc (DVD), did you try another disc? Did you trying hitting the Rescan button?
    Please view the above. Especially try the AVCHD DVD burn to folder to see if it works up to that point before you decide whether to download and install ImgBurn.
    Where do you intend to play back this AVCHD DVD? The hard part about this should be finding a player for it.
    More later.
    ATR

  • IPhoto can't find photo even though the thumbnail is present. Any help, there are dozens of photos in my library that won't open as iPhoto can't find them.

    iPhoto can't find photo even though the thumbnail is present. Any help, there are dozens of photos in my library that won't open as iPhoto can't find them. This is probably a very common question!

    With the amount of information you've provided it's impossible to offer a potential solution.  We need to know the details of your problem and situation, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you see when you launch iPhoto to open your library?
    what fixes have you tried before coming here?
    where is you library located?
    how long has this been occuring?
    did you apple any updates or upgrades just prior?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    What do you see when you click on a thumbnail?
    OT

  • When burning to a dvd- it says no media present, how do I fix?

    When I try burning my project to a dvd in the publish share drop down- it says no media present- how do I fix that issue?

    Hello, Hamerski11. Are you asking about Premiere Elements? It has its own forum, which is here:
    http://forums.adobe.com/community/premiere_elements
    and you'll get better help with video questions if you ask there. Not many of us use PRE.

  • Error while adding a custom field with Input help via AET

    Hi All,
    I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
    One field is required to have the input search help f4 and autopopulates the second field
    I am able to add one field(not requiring help) successfully through AET .
    I have created one Zsearch_help in se11 and its successfully running  and Autopopulating seocnd field while I am testing it
    While adding second field through AET,I need to enter following details as -
    field label,search relevant ,serach help etc.
    When I type the name of my 'Zsearch_help' against field search help it gives me following error
    'Search help is not compatible'.
    Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
    Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
    Please help me out.Kindly be detailed as I am new to SAP CRM.
    Thanks,
    Shivani

    The question is answered in CRM 7.0 forum:
    Getting error while adding a custom field (with input help) through AET

  • GL A/C with Detailed Transactions

    I have prepare a report which showing the GL A/C with Detailed Transactions.
    I need the link about GL tables with PO, AP and AR tables
    can anybody help me in this regard
    thanks in advance
    sadiq

    Please Refer to table
    gl_import_references
    link this table with gl_je_headers and gl_je_lines using je_header_id and line_id
    gl_import_references can be linked with subledger tables using gl_sl_link_id
    the Link table in Subledger can be identified from gl_sl_link_table
    Ex: gl_import_references shall be linked to ap_ae_lines table using gl_sl_link_id
    I hope it is helpful
    Regards,
    Sridhar

  • Read from Text File Detailed Help need Clean-up

    This is probably well known and nobody has bothered fixing it but the detailed Help of the "Read from Text File" function is sort of ambiguous:
    -  statement 1: refnum out is the refnum of the file that the function read. You can wire this output to another file function, depending on what you want to do with the file. The default is to close the file if it is referenced by a file path or selected from the file dialog box. If file is a refnum or if you wire refnum out to another function, LabVIEW assumes that the file is still in use until you close it.
    - statement 2: If you wire a path to file, the function opens the file before reading from it and closes it afterwards.
    I have found statement 1 to be correct, which makes statement 2 incomplete (and sort of tautological in the sense that 1) you expect LabVIEW to open the file before reading from it if you provide a path instead of a refnum... and 2) if you use a path input to file AND use the refnum out for some other function, the file is NOT closed, as correctly stated in statement 1).
    Just sayin' ...

    X,
    It deeply concerns me that you would take my response to mean indifference. I certainly had no intention to belittle what you had to say. On the contrary, I took this up with the concerned team, and had a small discussion. If you say that what someone says on this forum is of lesser or no value to National Instruments, you could not be more wrong. It defeats the whole purpose of this public forum.
    My point was not that it is not an issue, it certainly seems to be. Please be rest assured that even if it does not look like it from the outside, each comment however big or small is taken back to our workplaces and some thoughts poured over it. 
    On the whole, I recognise that I had a role to play in this misunderstanding of tone, and I sincerely apologise.
    Warm Regards,
    Prashanth N
    National Instruments

Maybe you are looking for