Media="print" problem in IE

I have a simple noprint option set in print.css applied to
the table around
the LH navigation to stop it from printing. Works fine in
Firefox and in
Opera, but IE will not display the LH navigation on screen,
and when I try
Print Preview or Print, I get script errors and the page will
not print.
Here is my print.css:
.noprint {
display: none;
I have this inside the head tag:
<style type="text/css" media="print">
<!--
@import url("print.css");
-->
</style>
URL:
http://www.mariagrist.net/dev/ping/cv.htm
thanks

??
sorry about that, it's working for me today too, I wonder why
it wasn't
working yesterday??
thanks
"Vix" <[email protected]> wrote in message
news:e5p5k4$aiu$[email protected]..
> Just looked at it in IE6 and the navigation is there and
working fine. In
> Print Preview the navigation isn't being displayed.
>
> Vix
>
> Pixel Warrior wrote:
>> I have a simple noprint option set in print.css
applied to the table
>> around the LH navigation to stop it from printing.
Works fine in Firefox
>> and in Opera, but IE will not display the LH
navigation on screen, and
>> when I try Print Preview or Print, I get script
errors and the page will
>> not print.
>> Here is my print.css:
>> .noprint {
>> display: none;
>> }
>>
>> I have this inside the head tag:
>>
>> <style type="text/css" media="print">
>> <!--
>> @import url("print.css");
>> -->
>> </style>
>>
>> URL:
http://www.mariagrist.net/dev/ping/cv.htm
>>
>> thanks

Similar Messages

  • Problem with media print styles in debug versus nondebug mode

    Hi,
    I am trying to debug why the same page (and code) will print one way on one server and another way on another server. These servers are a dev and test server with the same version of cf 9 installed.
    I am working on a page that has two divs floated left next to each other.
    [div 1] [div 2]
    We had problems printing this setup in IE 8, so I created a CSS file for media type print that removes the float from div2.
    So in my page I have:
    <link rel="stylesheet" type="text/css" href="../common/main.css" media="screen"/>
    <link rel="stylesheet" type="text/css" href="../common/mainPrint.css" media="print"/>
    In main.css the class is:
    .documentArea {
          margin: 2.5em 1em 0 1em;
          float:left;
    In mainPrint.css the class is:
    .documentArea {
          margin: 2.5em 1em 0 1em;
    On the Dev server, I am able to view the page correctly in IE and it prints correctly with div 2 below div 1:
    [div 1]
    [div 2]
    When I move the SAME code to the our Test server and view it in the same IE browser, the display of the page is correct but the printed page only displays div 1 and not div 2 at all.
    After some investigations, I discovered that the the print CSS worked when debugging was on and not when it was off. We turned on debugging on the Test server and the CSS worked correctly for printing. I also changed the name of the style to my name (leslie) and it still didn't work. I thought perhaps a default style in CF might be overriding it.
    I am wondering if there are default CSS files in ColdFusion.
    If you have ANY suggestions as to what is happening I would greatly appreciate it!
    Regards,
    Leslie

    Just to clarify ....
    If the ERROR_CODE parameter is made an 'OUT' parameter instead of an 'IN OUT' parameter the correct return value is given for the OracleCommand invocation but the WRONG value is still returned for the EF Model invocation i.e. just changing the parameter from 'IN OUT' to just 'OUT' does not fix the problem.

  • My "fix" to print problems in LR (using MS XP)

    Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
    My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
    I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
    As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
    - Athlon 64 3500+ with 2 GB RAM
    - Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
    - Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
    - Microsoft XP service pack 2
    - Adobe Photoshop Lightroom 1.3.1.
    - Adobe Photoshop Elements 5
    - Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
    - ICC profiles for various Epson printer paper
    - Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
    I used following setting:
    - In printer driver: "No color management" was selected
    - LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
    . LR Print sharpening: High
    - LR Print resolution: 360ppi
    When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
    In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
    Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
    After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
    Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
    BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
    The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
    I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
    Good luck!
    /Per

    Little unclear about the border thing- you say it prints with a too wide border, but also say:
    When I print the image with this set up, it still is printed without a border.
    It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

  • Printing problem on HP Photosmart C5280 All-in-One

    Hi,
    I'm trying to print a single page calendar but it's coming out with streaks in 3 places.  I tried 3x and the streaks are always in the same place.  I'm using Konica Inkjet Paper QP Premium Photo Glossy, which is supposed to be suitable for all modern inkjet printers.  Is this an ink problem, a printer problem or a paper problem?

    My guess would be a print settings issue.  I would suggest setting the media type to Photo paper rather than automatic and set the quality to "Best".
    If that does not help please provide more details - are the streaks at a consistent spacing?  Where are they on the page?  What color are the streaks?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Duplex Printing Problem - Word 2007, Vista and HP Officejet Pro L7780

    I'm having trouble with duplex printing on my new HP Officejet Pro L7780, from Word 2007, running on a brand new Vista system.  I've also had this same problem (repeatable) with two other computers, running XP Professional/Word 2003, XP Home/Word 2003.  All of the service packs have been installed for the operating system, word, and printer. 
    If you print a landscape document, using the auto duplex setting for the HP printer, the margins will print out offset by .25 inches, on the left and rigt margins.  So if your margin is 1 inches on right and left, the margins will print to .75 on one side and 1.25 on the other.  This would be annoying, except that I'm trying to print brochures and books, which requires that the pages print out exactly as set up... "close enough" isn't working for me
    The way I have replicated this problem is as follows:  set up a document in landscape format, using the default margins.  Insert an image on page one, size it so it takes the full margin area.  On the second page, fill it up with text.  Print the document, selecting the printer properties and setting Print on Both Sides=Automatic.   The easiest way see the problem is by holding the document up to the light.  The front and back margins should match and they don't.
    Any help you can provide would be very much appreciated.
    Diana

    Diana,
    This problem is perhaps much larger than you might have imagined.  We have tried to work with Hewlett Packard for over two years on the duplex printing problems.  In the process, we have expended over 100 hours of effort in troubleshooting the problem which has included updating software, reinstalling software, developing test documents, escalating issues, submitting technical findings, and in purchasing replacements.  Unfortunately, our efforts to interact with Hewlett Packard excalated support have resulted in an aire of apathy, disinterest, incompetence, frustration, redundancy, occasional discourtesy, and an outright lack of professional decorum - something inconceivable of a large, reputable company.
    We have identified several problems with duplex printing.  The duplex printing problems include irregular margin increases (.25 to .50 inch), margin shifts, cut-off text, compressed text, and compressed graphics.  Please note that most of these problems are only evident when printing documents from computer applications to the printer.  If the user simply uses the front printer panel to copy in duplex mode, these problems are not always evident.  This suggests that the printer mechanics are capable of properly duplexing and that the problem lies in the drivers.
    The problem is evident on the HP OfficeJet Pro L7780, Photosmart L7180, Photosmart C6150, Photosmart 3310, and likely on many, many other HP models.  The problem is evident on many computers (HP, IBM, Toshiba, and Dell), is evident in multiple applicatons (Word, Wordperfect, Excel, Peachtree, Notepad, and many more), and is evident on multiple operating systems (Windows XP Home, Windows XP Professional, Windows XP Media Center Edition, and Microsoft Vista).
    We consider ourselves to be extremely polite, patient individuals, but have nearly been driven to outrage by the indignant disregard offered us by HP's escalation support department; a department which should represent the cream-of-the-crop in both service and technical expertise.  Given the ease with which the problem can be duplicated, we expected an extremely quick resolution by HP who, to our knowledge, has never even made the effort to duplicate the problem in-house on our behalf.
    Ironically, HP highly advertises their J.D. Powers rated technical support, yet it appears that they actually have extremely poor published consumer rankings in some of today's mainstream computer magazines.  HP technical support makes no apologies for the fact the user cannot use a major feature of their printers, offers no indication that the problem is even being addressed, and off-loads the responsibility by suggesting that we contact Microsoft (who is to blame for this issue).
    Thank you, Diane, for your message.  We had a hard time imagining that we were the only one experiencing this problem, especially when HP promotes such a representation.  Which also begs the question why HP plays like the problem does not even exist?  I also fail to understand why HP technical support shows so little interest in a problem that is easily duplicated and adversely affects a major feature of the printer which is commonly used by individuals purchasing equipment for its duplex capabilities.
    This is sad because we have been a loyal customer of HP for over twenty-five years.  There was a time when we would have happily endorsed HP's steller products and steller support (provided you could get a problem escalated).  Now, however, they all-too-often appear to offer equipment that fails to support advertised features which is backed up by sub-standard support and extremely expensive ink.  This is an especially sad commentary for users who are buying HP's upper-end printers and computers.
    We desire to know if there are others out there experiencing similar problems?  If you have experienced these problems or would like samples of the problems we have duplicated, please respond.  I think the more information we gather, the better our chance of a successful resolution to a serious problem.
    Thanks Everyone!

  • @media print css tag

    I am using the @media print rule to present my data in a printable format (letter size). The problem I am having is Safari shrinks the output to about 1/4 of the desired size. It works fine in IE and Firefox.
    Has anyone else experienced this issue?

    yup, I've seen this as well. I had to create a print stylesheet, and I provided css styles in inches that Safari didn't respect. Everything was smaller than I had defined.
    After a bit of experimentation, it turns out that Safari is subtracting the user-defined page margins (1 inch on all sides by default), rendering the page as if it was 8.5 x 11 wide, and then scaling it to fit in the printable area.
    Extremely lame.
    Does anyone know where I can report bugs?

  • Printing problem in jsp

    Hi...
    I have made an website by using jsp and servlets, the problem is that when click on the print option, to print that jsp page, the links get printed with that, and i want to avoid that link, please help me out from this problem,,thanks in advance...
    Bye n tc

    this is a html/css problem and not a java or jsp one.
    create a css file print.css for example and write the following to this file :
    a{
    display: none;
    }add this to the header of the JSPs you want to print :
    <link rel="stylesheet" media="print" href="/print.css" type="text/css" />

  • Printing Problems with Lightroom!!

    I am completely new to Lightroom and was hoping that someone could help with my printing problem. I have been taking all my photo's in both JPEG and RAW versions for flexibility and I have not carried out any development to any of the photo's yet. I have tried going straight to the print module and tried print a basic copies, however the pictures print in very dark tones like the picture was taken in very bad light and there are some blue vertical lines appearing on each copy. Please note that this happens with both the JPEG and RAW pictures. I have ruled out the printer as a problem because I can print out the same photo via the software that came with my printer and they look great, just as they appear on the screen. Is there something that I am doing wrong? Hopefully there is a quick answer!!
    Many Thanks,
    Gareth.

    Sorry for the delay, I seem to be experiencing delays with this website.
    OK here goes:
    Under the Color Mangement Banner on Lightroom it has profile with managed by the printer next to it. Underneath that is Rendering Intent with perceptual by it, but these are blacked out.
    I looked in the Printer Properties on my PC and under the color management tab it has set to Automatic (I hope this is what you asked for)
    The Printer is an Epson stylus PHOTO RX560
    My Operating system is Windows XP, Media Centre Edition, Version 2002, Service Pack 2.
    Hope this helps.

  • Airport Extreme Printing Problem with HP Deskjet.

    Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4   Mac OS X (10.4.4)  

    Hello jds17. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

  • Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

    Not printing text only on Canon--grahics print ok.  Not printer problem.  Prints ok on a Brother and another network Apple prints ok on Canon.  Believe a computer setting was inadvertently reset.  What setting and how do I reset?

    Without your printer model numbers, readers can only give you vague general directions.
    System Preferences > Print&Fax > ...
    ... shows a list of all set-up printers.
    If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
    Mac OS X 10.6 Help: Resetting the printing system

  • Crystal report printing problem in Malayalam

    Hi,
    I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
    please help me...!!!

    Hi priyashekar,
    I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
    Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

    Print problems.  Printing out an email the text starts half way down the page.  I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem.  If anyone has any ideas I would really apreciate it. Thanks Penny

    One more thing to check:  System Preferences/Print & Scan.  Make sure your printer is set as Default.
    I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

  • Is there a way to use css media="print" to print all Spry tabbed panels

    By setting up a special style sheet and calling that with media="print" I can control all other content that I want to appear in the printed webpage but since the tabbed panels display="none" or display="block" are controlled by the SpryTabbedPanels.js I haven't found a way to force all panels to be display="block" in the print style sheet.
    The requirement is for a seminar timetable where each day is on a separate tab but if you want hard copy then printing all days in one go is best.
    Any suggestions would be most welcome.

    Yeah! I found the answer in another forum topic - See
    http://forums.adobe.com/message/636534#636534
    Use
    <style type="text/css" media="print">
    .TabbedPanelsTabGroup {
    display: none !important;
    .TabbedPanelsContent {
    display: block !important;
    overflow: visible !important;
    height: auto !important;
    </style>

  • Leopard printing problems on several printers (Am I the only one?)

    Since installing Leopard shortly after it was released, I've had flakiness with printing:
    - With Tiger, when I printed, I could open the printer's window, and see the print job queued. The job would finish, disappear from the window, and everything would be fine.
    - When the job was printing, the printer icon would appear in the Dock. When the job was done, the icon would disappear from the Dock. Simple.
    With Leopard, printing has worked, but I have never seen a print job appear in a PrinterProxy window. I print, the printer outputs the job, and PrinterProxy is always blank. The printer icon appears in the Dock, and stays there forever. I found that I could ctrl-click on the icon and select the Auto Quit option (Hooray!), but that only worked for a while. Then the icons started staying in the Dock again. When I click on the Dock, there is no more Auto Quit option... just the "Application Not Responding" message. I have to force quit Printer Proxy after every time I print.
    What's stranger is how long it takes for the PrinterProxy app to start up. The icon in the Dock bounces for well over a minute. Sometimes, the job finishes printing before the app is launched. If I switch between apps using Cmd-Tab, I can select the PrinterProxy app, but it never actually displays; instead, I just revert to the current window.
    This is true for every printer I use, and as a traveling consultant, I use several. It is true whether I am printing via Airport, or over a direct Internet or USB connection.
    The printers that are permanently in my Printer List are:
    Canon i9100
    Brother MFC-8840
    Epson Stylus Photo 220
    HP LaserJet 1320N
    HP LaserJet 8800
    HP LaserJet 6570
    HP Color LaserJet 5550
    Adobe PDF 8.0
    All of these have the same problems. What's worse is, when I have a printing problem, there is no way to diagnose it, since the print jobs never show up in the PrinterProxy.
    I have reset my printing system many times. I have deleted and re-added my printers many times. I have downloaded drivers from the manufacturer's sites, and reinstalled Leopard's default drivers. Nothing makes a difference. Strangely, after updating to 10.5.2, the Auto Quit problem went away for awhile, then returned spontaneously.
    At the thread below, I show some of my system and crash logs from a prior discussion. Someone was helping me with the problem, but after asking me to post my logs, he seems to have dropped off the thread.
    http://discussions.apple.com/message.jspa?messageID=7013209#7013209
    I can't believe this problem is endemic to Leopard. I know many people who seem to use Leopard without any problems at all. (They even print once in a while!) And yet, as a fairly advanced user, I can't believe I'm the only one having this problem! My system is pretty plain vanilla, with no weird mods, hacks or apps. Pretty much just straightforward creative and productivity apps. I use it daily for business, so I try to keep all wacky stuff off of it.
    There must be a solution, short of doing a clean install. Can anyone help? Are there PrinterProxy-related files I can delete when I reset the Printer System that might help resolve this? Prefs?
    Thanks,
    David

    I'm having exactly the same problem with a Lexmark C760.
    When I inspect the Activity Monitor while opening the Printer Icon from the Dock (or press the Button "Open Print Queue" in the "Print & Fax" System Preferences), I can see the Printer Icon as "Printer Proxy (Not Responding)" marked in red in the processes list. The Dock icon bounces for quite a while, and after about 2 minutes, a Printer List actually appears under the PrinterProxy application and the process in Activity Monitor changes its name to "(null)" and its color to black.
    Though there is no entry in the PrinterProxy list when I print something from another application while keeping the window open, I can select "Supply Levels" and the correct information appears, so it seems to be functional.
    It also seems that there are several copies of the drivers remaining, as the application in the Dock is named "Lexmark C760 (4)", probably from my attempts to remove and reinstall the driver. Is there some interference with old installations of the drivers that still lurk somewhere, hidden in the depth of the many libraries? How can I get rid of the previously installed drivers for good?

Maybe you are looking for

  • Search in portal

    Hi, SSPortal has a field to search. Does this search permit to find id's for incidents or service request or only help articles? If a user need research an old closed ticket, he need look in every page to find it and if have a lot of tickets it'll be

  • Custom type of file requester

    Okay, here's one for the the LabVIEW gurus....  I've got an app where I'm selecting a bunch of files in file requester- now I want to display a requester showing the files that have been previously selected and allowing the user to close them. So, qu

  • HttpOnly Cookie in weblogic 10.0

    Hello, I use weblogic 10.0 version. when I enable cookie-http-only in weblogic.xml, in the output I can see that flag is not set. The documentation says that this flag is set to true by default. I do not know if there were any fixes made in the 10.X

  • Pushed restore button with itunes and now it seems stuck and won't reinstall software

    Restore button was accidentally pushed while trying to install itunes and now it appears to be stuck and won't reinstall software. Please help

  • Strange date query

    In my procedure I convert a varchar input to a date as: lv_mydate := to_date(p_passed_date,'mm/dd/yyyy') The p_passed_date is a varchar type and lv_mydate is a date type Now, when I use this lv_mydate in my select query no rows are returned although