Media Recover Problem

Can I recover the datafile in non-archive mode ?
Thank !!

Its possible to recover datafile in noarchive mode if the redolog files have nt overwritten when the datafile is backed up last time. Assume u backed up datafile yesterday and u dint do many transactions on the database to overwrite the redolog files then u can recover but, I dont think thts generally possible on production database. One more way is to restore the lastbackup alongwith controlfile but this results in dataloss. Usually recovery is possible when the database is in archivelog mode.

Similar Messages

Device screen not turning off + Media Player Problems

My screen does not turn off, I checked the settings in screen/keyboard and they are set but don't seem to work. This is causing my battery to drain.
Also, I am having intermittent media player problems.
Suggestions?

Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

CS6 Media Browser Problem

When using the Media Browser in Premiere Pro to view files in a folder that contains many files (100+), the browser keeps jumping back to the beginning after viewing a few of dozen files. I then have to scroll back down to the last place I was and then I can continue a little further before the browser jumps back to the beginning again. The files do not open instantly -- there is a finite time where the message "processing ..." is displayed. I gave up before getting to the end. I doubt that I have an under-resourced computer since it is a i7-3770K with 32GB RAM and a GTX670 card. Is there a limit to the number of files that can be viewed in the Media Browser? Any suggestions?
Thanks
P.S. Just did a search on the problem and I see that it is a well known issue.

Hi guys !
Just wanted to post because we had the same problem on 4 different computers with different configurations.
It was really annoying to have this jumping/refreshing media browser problem. At a point, that this browser was useless.
Then we had a problem with droping sound editing r3d code... Kind of a deal breaker, when the company claims that you can edit 4K r3d files no ?
We finally figured out that the Media Cache and the Media Cache files NEEDS to stay in the original folders (C:\Users\nameofuser\AppData\Roaming\Adobe\Common).
Even if everybody on the web tells you to dedicate a single SSD just for the media cahe, it won't work for Premiere pro. DON'T MOVE THOSE FOLDERS !
Removing those folders to the original place (C:\Users\nameofuser\AppData\Roaming\Adobe\Common) [again] solved the problem for us. Hope it will work for you guys.
Don't blame Adobe, i'm sure they'll read my post to fix this in the next version of premiere

Tutorial for solving some media manager problems

Hey gang,
Hopefully me posting this isn't bad forum etiquette, but I recently published a tutorial that details some fixes and "best practices" for properly importing media and getting rid of some pesky media manager errors:
http://library.creativecow.net/lyon_matt/fixing-fcp-assets/1
Full disclosure: I get something like a $0.01 per page view, but I'm not expecting to get rich. I just wanted to spread the word because I know lots of people experience Media Manager problems.
Feedback is definitely welcome!
Matt Lyon
Editor
Toronto

I think it's just a great article and is of more value than 1 cent I just offered by reading the article...
Rienk

Media live problems - solutions?

Hi,
New to the forum and unfortunately found it while seeking solutions to my Media Live problems :(
It looks like I have some similar problems to those I've already seen posts on - no HDMI output after Windows (Vista) boot screen, no sound, and also I have some instability (machine locks with diagonal coloured stripes on the display). I've been trying driver updates, but the Nvidia graphics one from the support website just crashes when installing and I'm scratching around to find a way of booting to (proper) DOS to do a BIOS update.
Given some of the posts on the HDMI issues are now quite old, are there any more solutions out there, especially for common ones like the HDMI problems as MSI support must have been aware of them for 6 months now!?
Any help or links greatly appreciated!
Thanks,
Mark.
Media Live
Athlon 64 X2 5600+
Vista Home Premium 32bit
Corsair 2GB (2x1GB) DDR2 800MHz/PC2-6400 XMS2
Hauppauge HVR-1300

Hi, I also have the same problem with the HDMI connection. When the system boots up it works okay, If I leave the system playing a music album or video the sound just stops working after about 10-15 minutes. When I try and reboot the system the screen does not work. You can see the Vista boot screen,but get no desktop or sound. I have to leave the system switched off for about 20minutes and then boot it up and it works again. Also I have a 1080i Sony LCD and when I try to run the desktop at this resolution it justs goes blank. I can only run the desktop resolution at 720i. This is my second system as the first one had the same problems. Does anyone at MSI monitor these forums?....Thanks..

Oracle 8i database data recover problem

Hi hi,
I've recently encountered a problem on how to restoring data from old oracle folders to a new oracle 8i database.
Originally, my oracle 8i was installed in windows 2000 server on a harddisk (J:\oracle old) separated from that the OS (windows 2000 server) resided. Recently, the harddisk with the OS has been permanantly demaged and I've installed windows 2000 server on a new harddisk (C:\winnt), reinstalled the oracle database (J:\oracle).
However, is there any way to recover the data from an instance of the original database to the newly created database.
I will be grateful for any suggestion? Thanks a lot.

CREATE CONTROLFILE
Caution:
Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle9i User-Managed Backup and Recovery Guide.
Purpose
Use the CREATE CONTROLFILE statement to re-create a control file in one of the following cases:
All copies of your existing control files have been lost through media failure.
You want to change the name of the database.
You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
Note:
If it is necessary to use the CREATE CONTROLFILE statement, do not include in the DATAFILE clause any datafiles in temporary or read-only tablespaces. You can add these types of files to the database later.
An alternative to the CREATE CONTROLFILE statement is ALTER DATABASE BACKUP CONTROLFILE TO TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, that SQL script will also contain all the necessary SQL statements to add those files back into the database.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_54a.htm#SQLRF01203
Joel P�rez

Quicktime and media encoder problem

I am trying to make a quicktime movie with Premiere CS4. The project is 870 still frames rendered from 3DS MAX. Everything works fine when I export and it sends the movie to Media Encoder's Queue. When I hit "Start Queue". the project starts to encode then quickly finishes with a green check mark next to the project, however no video is made. Please note I have tried other file formats such as AVI and it works fine. This seems to be am issue with QT. I have tried just about every QT codec as well and nothing seems to work. The codec I normally use is animation.
I have successfully done this many times in the past with no problems. Unfortunately, I recently had to replace my main harddrive which died that stored Windows XP, therefore I had to re-install Adobe Master Collection CS4. After the reinstall media encoder won't make Quicktime movies anymore. And yes I have QT installed. I had ver 7.6.2. I read somewhere that 7.5.5 works better with premiere CS4 so I found that, uninstalled 7.6.2, and installed 7.5.5, however, unfornuately it did not fix the problem. Anyone know how to fix this or having the same issues? Please see my specs below. Please let me know if you need more info. Thanks for help in advance.
Intel Quad processor
4 GIG Ram
Nvidia 8800 GTX video card
OS: Windows XP SP3
Adobe Premiere CS4
Media Encoder 4.1.0
Quicktime 7.5.5 (also tried 7.6.2 - the most recent)

There was someone having a similar problem on the www.weddingvideodoneright.com forums,and others were having various issues with ME not creating files and so I've copied this from that thread and hope it helps. Also, check out the Adobe link at the bottom-
Re: Another miserable issue with Premiere 'Pro' CS4 Any advice?
« Reply #11 on: June 04, 2009, 12:46:49 PM »
Quote Modify Remove Split Topic
Digging further, this is the "official" solution from adobe -
Quote
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.
The url is: http://kb2.adobe.com/cps/407/kb407106.html

Media Player Problem playing only one song at a time

Recently acquired a BB Curve 8330 (OS 4.5.0.127) running on a Bell Enterprise server. I bought a SanDisk 16G Media Card. The card is formatted, the songs are there (about 20 albums) I can view, scroll, choose shuffle, choose an album, choose a artist or any other option. No matter what I try, it will only play one song at a time. Once the song plays, it just stops and stays at the end of the song. Periodically, the entire device will shut down and restart. I saw somewhere else in the forum to pull the battery, wait 1-2 minutes, didn't work. There was also a post to try to downgrade the software from 4.5.0.127, but really, is that necessary?
Is there a fix, patch, upgrade, or other I can try rather than going backwards?
Please help. Really frustrating.

I was having the same problem. I found out the CD's that I ripped were not in MP3 format they were in windows media audio format. I was able to load them to my phone and they would play one at a time or when a song got to the end it would restart my phone. Replaced WMA files with MP3 files and it fixed the problem. Hope this helps.

Media Encoder Problem

I am using Flash CS 4, If I attempt to file>import>import video, the import video window/dialog box opens, if I browse and select a AVI.file I receive a dialog box telling me it is in the wrong format and to use the Launch Adobe Media Encoder button to convert to proper format. This is where problem starts.
An Adobe Media Encoder Debug Event dialog box opens, it states that "Adobe Media Encoder has encountered an error", ..\..\Scr\Init.cpp-42
the only option is to select a continue button, then an Adobe Media Encoder dialog box opens stating that "adobe media encoder has encountered a problem and must close. It wants to report the issue to Microsoft, but that doesn't help me start or repair my problem. I have created a 3 page PDF of screen images which shows the sequence of dialog boxes and messages, I have tried to locate error data files in application data files, I can find the folder but it does not contain any error txt files.
Can any one Help me with this issue, any way I attempt to open Media Encoder the results are the same.

I've been very fortunate to have a lot of hi-def video work the last three months and the Media Encoder is literally making me think that Premiere CS4 is really more of a hobby program. I spend a third of my time watching the encoder stop, viewing encoded files that don't work. I updated to 4.0.2 and it is worse. I think Adobe really needs to address this problem. Premiere is a great tool and its ability to import Sony Hi-def XDCAM footage is really a nice thing, very helpful, but what good is it when you spend so many hours watching your finished video get crashed in the encoder? I have tried a lot of things and at this point one pass on the FLVs for client reviews seems to be the best I can do. I have a great computer with a quad CPU and lots of ram but I really think Adobe is not addressing those of us that want to use the tool to make a living that are finding it a really bad encoder and would love to hear any ideas on what I might be able to do.
BTW--typical project is 6-7 min. long with about 100-125 clips. I had a lot of problems also with Premiere CS4 crashing and not allowing me to open files but I used embeded sequences to stop the crashing. If I didn't spend so much time finding workarounds on CS4 I could really make a good living. BTW--the Sony EX1 is a really great HD camera.
Leo

Media Encoder Problem CS4

Recently got CS4 master edition, every time I open Adobe Media Encoder from Flash or otherwise it gives me an error,
[..\..\Src\Init.cpp-42]
then it closes and sends error report.
Any ideas what the problem is?
I am hoping its a bad install but I really don't want to install all of master edition again.
Any Ideas?

Are you running on Windows or Mac OS X?
Try upgrading to the latest version of the Quicktime player and see if that makes a difference.
HTH

Media center problem with Qosmio G35-650 - error message

hello all
I have a problem with media center on qosmio g35-650.
When starting live tv , an error message appears and writes "application failure please restart your computer again. if problem persists again please contact with your hardware assistance"
It was working yesterday and today something happened.
Also it cant find any tv signal available. Is it a hardware problem?
regards
cem mete

Hello
Please dont be mad on me but in most cases is the user the problem and not the machine. I really dont know what is problem in your case but if the unit has well TV signal there should not be any problem.
Your unit must be an US model. Those notebooks are not known to me but I presume that Qosmio player is preinstalled too. I have G20 and TV works perfect (WMCE and Qosmio player). What is with Qosmio player in your case? Does it work well?
Be sure that TV tuner is listed properly in device manager and also TV antenna is connected properly.

Safari/Windows Media Player problem.

I have a bit of a problem at the moment with viewing video content on some sites - when I click the link/button/whatever this message appears -
"Safari can't display content on this page
Some content on this page requires an Internet plug-in that Safari doesn’t support. The application “Windows Media Player” may be able to display this content. Would you like to try?"
When I do try WMP, it opens ok, tries to play it, then gives me this message-
"The file name, directory name, or volume label syntax is incorrect"

Do you also have Flip4Mac installed?
If not, Microsoft is no longer supporting Windows Media Player for OS X but Flip4Mac will continue to be supported which adds a plugin for Safari and other browsers that should work.
http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=windowsmedia

Media reconnection problem URGENT!

I am in a very urgent situation.
Working on a feature length project and today after opening 2 sequences I was working on yesterday I had to relink media, because my scratch disks were not connected.
While relinking, final cut pop up says that some clips' media start & end has changed , continue with relinking or cancel. I had to continue work so I went on. Alas, now i am in front of a nightmare!
Both sequencies have been altered. In some areas the edits look the same but the content is different, in other areas cuts have been totaly removed.
please help.

Thank you for trying to help. These file were imported by log and capture and were atomaticaly converted to prores 422 LT. I did not mess around with file names, as the names were given during the log and transfer proccess.
This is definetely a final cut bug.
The problem dissapeared (not solved though, as the reasons remain unknown) with the folowing way:
a) I open one of the backed up files and looked at my rough cut wich consists of sequencies.
b) By playing the 2 specific sequencies on the rough cut, there was no error in the edit.
c) By opening these 2 sequencies on the project browser, there was a different edit !!!!
d) By going back to the rough cut and double clicking on the nested sequence, I could see the original edit.
e) Now I had one specific sequence in the timeline, the same name, the identical sequence, opened in two different tabs. In one tab (the sequence that i entered to through the rough cut) the edit was the original, in the other tab (the one that i opened through the project browser) the edit was distorted !!!
f) I copied the clips of the original edit to a newly created sequence.
g) I deleted the old- problematic sequence
h) i repeated the process with the second sequence that was altered by final cut on its own will.
I hope this will help someone in a similar situation and I keep this question as unsolved, because in reality noone really knows - until now- the reason for this situation. Thank god it was solved.

C-media audio problems

I've been having problems with flash games and animations.
Basically the problem used to be that each time a flash movie/game
would try to play a sound, it would freeze for a second then
continue (playing the sound properly). This would happen almost
every time a sound was played and this was really irritating. I
tried updating my sound drivers to the most recent, and this has
just altered the problem. Now the movie/game freezes for a second
after each sound.
My sound device is (I think) C-Media CM6501. It's a built in
sound card on an Asus M2N-E SLI motherboard and I'm running Windows
Vista. However before this PC I had an Acer laptop with a C-Media
sound card and I was having exactly the same problem. I can't
remember the specific details but it was running Windows XP.
Anyone know what the problem is?

I don't believe it is your sound card problem. I uses a
creative live sound card and also have used the Cmedia on boards
and have the same results that you have/ I myself believe it is a
flash player problem handling the chnageover of sounds. I don't
believe there is volume leveling in the flash player and it floods
the memory used for conversion of sound until it catches up! That
is putting it simply! Loud bass sounds and extremely loud theatre
type sounds seem to cause the hangups. I>E>
watching innertube CSI Miami, and others.

X6_32GB-Media Transfer Problem

when i connected my X6 to PC in Media Transfer Mode, The green arrow icon(Safely Remove Hardware) in taskbar showing many times 'Found New Device'..and the USB symbol in my X6 juz keep blinking/flashing..Help????
Faster coz Comes With Music must activate within 2 months..

Thanks for the reply, Jimmy but I have always save the mp3s into phone memo (C: Phone Memory). Do you have any other idea why this is happening?
I found out something new today. If it was a call by unknown person which are not in my Contact list, the ringing tone is the mp3 (although it only happened once, so I'm not sure if this is the case). However if the caller is from my contact (which contains image), the ringing tone is default.
Any idea how to solve this problem?

Media Recover Problem

Similar Messages

Maybe you are looking for