Media Smart Server Remote Access IE

I have recently purchased and installed my MediaSmart Server.  So far, I'm very happy with my purchase.  I have two issues and both revolve around Internet Explorer.
Issue 1:  I have created a few remote access accounts and they seem to work fine when using something other than IE.  My IE friends get to my .com site and even get as far as being asked for their user name and password.  After the enter it and hit enter, it brings them back to re-enter user name and password.  My Firefox friends get right in.
Issue 2:  IE supposedly allows the ability to seleect multiple photos and up-load them to the share folder I have created.  I say supposedly because of the above issues.  In any other browser (FirefFox) you have to select one photo at a time and after you have selected all the photos you wish to upload, then select upload and all the photos will load.  Why would they (HP & MSoft) not allow other browsers to select more then one file at a time?

Well i don't think you have an option to access media server from the remote location?
But you can access your drive from the remote location using FTP feature.

Similar Messages

  • I can not get imovie to see my external hard drive it is an HP media smart server

    I can not get imovie to see my external hard drive it is an HP media smart server and I need to be able to house all my video on this server but it access in imovie.

    amanda0509, I think you need to reformat the disk to something iMovie is able to work with. iMovie won't allow you to copy or move projects/events to a disk that is not formatted as a Mac OS Extended disk. Once you format it however, it won't be usable by a Windows PC. Are you trying to acces the media smart server by your Mac and also by some PC by any chance?

  • Using HP Media Smart Server and Time Machine

    In a small office we have mixed Macs and Windows machines plus an HP Media Smart Server. HP provides Mac client software that allows Time Machine on the Macs to backup to the HP server. This is working fine on two Macs running snow leopard. Another Mac is running 10.5.8. The HP server is visible and accessible. Time machine Preferences even lets me try to select the HP server as the backup device. But when I make that selection, I get the error message,
    "Time Machine could not be configured. The built-in network interface could not be found."
    I have found a number of articles about this when I search the error message. But by and large those articles have to do with folks building their own intel based machine and then running Mac OS X. Fixes involve messing around with boot files, etc - not something I really want to do.
    Does anyone have a clue what might be going on and/or how to resolve this?
    thanks

    Howard Cohen wrote:
    I am somewhat reluctant to do that as I tend to not want to change things that I don't understand.
    Good! And since that refers to a way to run OSX on non-Apple hardware (in violation of the License), it probably wouldn't apply to your situation anyway.
    I don't easily find specs of this server, but if it doesn't meet the requirements set by Apple, it may not work reliably with Time Machine. See: Disks that can be used with Time Machine.
    And be careful here: just because some 3rd-party hardware claims to support Time Machine doesn't necessarily mean that Apple supports it, or that it will work in all circumstances.
    First, since this is *unsupported by Apple,* there's nowhere to go when there's trouble. AppleCare will refer you to HP, who will refer you to Apple.
    Second, you're risking a future update preventing it from working, and perhaps rendering your backups useless.
    From a post in another forum (found by V.K.):
    The technical reason why Apple limits Time Machine to 10.5 AFP volumes appears to be to prevent disk image corruption. There were additional features added to AFP in 10.5 to support Time Machine. These presumably allow the disk image engine to force disk image journal data to write out all the way to the disk. Without such features, a network interruption can result in a corrupted filesystem on the disk image despite journaling. Remember, journaling relies on the journal being written all the way to disk before the changes take place. If you can't guarantee that (e.g., because of network/NAS buffering) then the journal is useless. Time Machine appears to rely heavily on disk journaling to deal with network drop-outs, interrupted backups, and the like. Take this away and your data is at risk.
    If the NAS you are using supports these features it should report them to the OS and you should natively be able to choose that volume. If you have to trick the OS to use the volume it means the NAS does not support it.
    To summarize: if you care about your backup data you should avoid using non-natively supported AFP servers.

  • Hp media smart server ex 490

    Hi, 
    I am looking for recovery software for my hp media smart home server ex 490. anyone knowes where i can find it?
    Glenn

    The last update of i tune  that i have is 10.5.2.11  on my computers ( windows XP, Vista and 7 ) that update broke the link to my media smart server. I cannot connect my itunes on my server with the itunes on my computers.
    Wath is the problem with that update?

  • E3000 Media Server - Remote Access?

    I got the the e3000 media server setup and can play all my music through it on all my PCs. Really Cool.
    Is there a way I can access this media from another location (WAN side)?
    I'm going to a party this weekend and my job was to have the music. Instead of copying my entire library (4.5GB) to my laptop, I was hoping I could access my library on the router USB port from his connection. Is this do-able? I am running Linksys 1.0.0.4 firmware now from Dec 2010.

    Well i don't think you have an option to access media server from the remote location?
    But you can access your drive from the remote location using FTP feature.

  • Tagging and Watch folders on a HP Media Smart Server

    I have a HP Media Server and have moved all my photos/videos to this server so that all three of my PC's may access them easily. I have a few questions that maybe someone can help with.
    1. My wife and I use separate PC's and have PSE 7 on them. Apparently when we tag the photo's on the server, the tags are relative to the PC's that we tagged them from (multiple instances) and I would like to know how to merge them so that all PC's accessing the server media can see the Tags regardless of what PC generated them. Also how to prevent this from occurring in the future.
    2. This may not be the appropriate Forum to ask the question, but you never know...My wife and I have made a habit of saving media to our home server. This really cuts down on having duplicate file's on multiple PC's. The problem that we are having is that when I try to add the media folders on the server to the "Watch Folder" list, Elements returns an access denied error. Now I know that this is almost certianly an issue with the Windows Home Server OS, but I was wondering if anyone may have experienced this before and has a solution.
    Thanks for any help,
    Brad

    Brad,
    While it is possible to store your PSE catalog and photos on a server and share that catalog among several computers, setting it up is tricky and you may not be satisfied with the performance of PSE:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Storing_the_catalog
    Currently, it sounds like you're storing your photos on the server but each computer has its own PSE catalog file, which is why tagging a photo from one computer won't show up on another (the tags are stored in teh catalog file).
    For watching a network folder, see this FAQ:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Watching_Network_Folder s

  • Software and drivers for media smart server EX 475 win 8.1

    Had to replace my laptop and is now running win 8.1 (64 bit). I need software and drivers for my mediasmart server EX 475 (GG 795 AA) 

    I'd say go with Middleton BIOS either way (SATA II). In which case, get a newfangled 802.11ac card while you're at it.

  • Remote access and network services problem

    I have a Mac Pro with two IP configs:
    Ethernet 1: 69.##.##.## /255.255.255.248 [hidden for public forum security]
    Ethernet 2: 10.0.0.20/255.255.255.0
    My primary needs:
    Able to remotely access the Mac via Remote Desktop using the public IP. Local LAN connectivity using 10.##.##.##.
    Setup:
    I have a 10 public IP address from my ISP and using one of the 10 now. Everything pings OK.
    Question:
    How can I customize the network service so that I can select the Ethernet 1 or Ethernet 2 port to use? So far it forces me select Ethernet 1 for all of the services selected. I'd like to use FTP & Web Server & Remote Access on the Ethernet 2 (public). The rest is LAN. I notice that Appletalk is only allowable on a single IP.
    Quick experiment with the Internet sharing using Ethernet 2 (public) to Ethernet 1 failed to provide the desired forwarding result.
    Mac Pro   Mac OS X (10.4.9)  

    I think you need to go further into the settings and define FTP etc. to the specific Ethernet. There are also settings Automatic and where you define your connection. I have a 3 inch book that I will look at to see if they address it. I to plan to do something similar, but haven't got there yet.
    Michael

  • E4200 - media server remote library

    i've not seen anything that sugests this (also my E4200 is on order, pending delivery, so unable to look into it more), but is it possible to have a remote library with the E4200 media server?
    i currently have a server with alot of content on it, but it does not support uPnP/DLNA. would i be able to use the E4200 to connect to the server and access it via the E4200's media server?

    Once you get the Router E4200 you can create a remote library with the E4200 media server..But Media server controls are very simple with only server naming and scan controls. E4200 will distribute your media files with the built-in UPnP or DLNA server so Yes you be able to use the E4200 to connect to the server and access it via the E4200's media server...

  • Lync Desktop sharing is not working via Remote Access Server / VPN

    Sometimes, few users using RAS (Remote Access Server) / VPN are not able to share desktop.
    It is irrespective of other user (from other end) is using VPN or Office wired network.
    Note - we have enabled VPN split tunnelling for our environment and the issue is happening after that only.
    Also, it is happening with few users not all.
    laptop is : HP elitebook 2570p
    any resolution ?

    Hi,
    Did these issued users also meet the issue internal the corporation?
    1.  Please double check if the split tunnel VPN setting configure correctly with the help of the link below:
    http://blogs.technet.com/b/nexthop/archive/2011/11/15/enabling-lync-media-to-bypass-a-vpn-tunnel.aspx
    2.  As the issue only happen for a few users who using VPN, please try to delete Lync user profile and then test again.
    3. Please also try to change another computer with the issued Lync account using VPN to test the issue.
    4. Please also try to test the issue with Internet network instead of VPN to test the issue again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Remote access VPN with ASA 5510 using DHCP server

    Hi,
    Can someone please share your knowledge to help me find why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?
    I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
    ASA Version 8.2(5)
    interface Ethernet0/1
    nameif inside
    security-level 100
    ip address 10.6.0.12 255.255.254.0
    ip local pool testpool 10.6.240.150-10.6.240.159 mask 255.255.248.0 !(worked with this)
    route inside 0.0.0.0 0.0.0.0 10.6.0.1 1
    crypto ipsec transform-set FirstSet esp-3des esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map dyn1 1 set transform-set FirstSet
    crypto map mymap 1 ipsec-isakmp dynamic dyn1
    crypto map mymap interface inside
    crypto isakmp enable inside
    crypto isakmp policy 1
      authentication pre-share
      encryption 3des
      hash sha
      group 2
      lifetime 43200
    vpn-addr-assign aaa
    vpn-addr-assign dhcp
    group-policy testgroup internal
    group-policy testgroup attributes
    dhcp-network-scope 10.6.192.1
    ipsec-udp enable
    ipsec-udp-port 10000
    username testlay password *********** encrypted
    tunnel-group testgroup type remote-access
    tunnel-group testgroup general-attributes
    default-group-policy testgroup
    dhcp-server 10.6.20.3
    tunnel-group testgroup ipsec-attributes
    pre-shared-key *****
    I got following output when I test connect to ASA with Cisco VPN client 5.0
    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDO
    4024 bytesR copied in 3.41 0 secs (1341 by(tes/sec)13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 853
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing SA payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ISA_KE payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing nonce payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received xauth V6 VID
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received DPD VID
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Fragmentation VID
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags:  Main Mode:        True  Aggressive Mode:  False
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received NAT-Traversal ver 02 VID
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Cisco Unity client VID
    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, Connection landed on tunnel_group testgroup
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing IKE SA payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA Proposal # 1, Transform # 9 acceptable  Matches global IKE entry # 1
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ISAKMP SA payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ke payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing nonce payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for Responder...
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing hash payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Cisco Unity VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing xauth V6 VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing dpd vid payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Traversal VID ver 02 payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Fragmentation VID + extended capabilities payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Send Altiga/Cisco VPN3000/Cisco ASA GW VID
    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 440
    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + HASH (8) + NOTIFY (11) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 00000408)
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Received Cisco Unity client VID
    Jan 16 15:39:21 [IKEv1]: Group = testgroup, I
    [OK]
    kens-mgmt-012# P = 10.15.200.108, Automatic NAT Detection Status:     Remote end is NOT behind a NAT device     This   end is NOT behind a NAT device
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing blank hash payload
    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing qm hash payload
    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 72
    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 87
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): Enter!
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing MODE_CFG Reply attributes.
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = cleared
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = cleared
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary WINS = cleared
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary WINS = cleared
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: IP Compression = disabled
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling Policy = Disabled
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Setting = no-modify
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Bypass Local = disable
    Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, User (testlay) authenticated.
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64
    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 60
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg ACK attributes
    Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=49ae1bb8) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 182
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg Request attributes
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 address!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 net mask!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DNS server address!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for WINS server address!
    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Received unsupported transaction mode attribute: 5
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Banner!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Save PW setting!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Default Domain Name!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split Tunnel List!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split DNS!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for PFS setting!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Browser Proxy Setting!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for backup ip-sec peer list!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Smartcard Removal Disconnect Setting!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Application Version!
    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Client Type: WinNT  Client Application Version: 5.0.07.0440
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for FWTYPE!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DHCP hostname for DDNS is: DEC20128!
    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for UDP Port!
    Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected.  No last packet to retransmit.
    Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=b04e830f) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload
    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload
    Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected.  No last packet to retransmit.
    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE received response of type [] to a request from the IP address utility
    Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Cannot obtain an IP address for remote peer
    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE TM V6 FSM error history (struct &0xd8030048)  <state>, <event>:  TM_DONE, EV_ERROR-->TM_BLD_REPLY, EV_IP_FAIL-->TM_BLD_REPLY, NullEvent-->TM_BLD_REPLY, EV_GET_IP-->TM_BLD_REPLY, EV_NEED_IP-->TM_WAIT_REQ, EV_PROC_MSG-->TM_WAIT_REQ, EV_HASH_OK-->TM_WAIT_REQ, NullEvent
    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE AM Responder FSM error history (struct &0xd82b6740)  <state>, <event>:  AM_DONE, EV_ERROR-->AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL-->AM_TM_INIT_MODECFG_V6H, NullEvent-->AM_TM_INIT_MODECFG, EV_WAIT-->AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG-->AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK-->AM_TM_INIT_XAUTH_V6H, NullEvent-->AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA
    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b terminating:  flags 0x0945c001, refcnt 0, tuncnt 0
    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending delete/delete with reason message
    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing IKE delete payload
    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
    Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=9de30522) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 80
    Regards,
    Lay

    For RADIUS you need a aaa-server-definition:
    aaa-server NPS-RADIUS protocol radius
    aaa-server NPS-RADIUS (inside) host 10.10.18.12
      key *****   
      authentication-port 1812
      accounting-port 1813
    and tell your tunnel-group to ask that server:
    tunnel-group VPN general-attributes
      authentication-server-group NPS-RADIUS LOCAL
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • Remote access VPN to server from outside and server reach internet on the same time

    Dear,
    I have problem in my ASA 5515-X , when i make Remote access VPN to servers in inside zone the internet connection disconnected in the servers, or when i have internet in servers, the remote access cant reach servers.
    the configuration for server as static NAT for each server, and the connection of VPN is to another public IP but in the same subnet of NAT ip.
    server1 : 10.10.10.2 nat to 5.6.7.8
    server2: 10.10.10.3 nat to 5.6.7.9
    server3: 10.10.10.4 nat to 5.6.7.10
    VPN connection to 5.6.7.12
    is there any solution for this senario, remote vpn to servers and the same time the servers have internet readability for download updates .. etc

    Hi,
    So it seems that the problem is with lacking a NAT0 configuration
    You could modify the below configuration to match your networks/IP addresses used. In the below configuration I presume that you have interfaces "inside" and "outside".
    object network SERVER-NETWORK
     subnet <server network address> <network mask>
    object network VPN-POOL
     subnet <vpn pool network address> <network mask>
    nat (inside,outside) 1 source static SERVER-NETWORK SERVER-NETWORK destination static VPN-POOL VPN-POOL
    Just insert the correct address related information and change the "object" and interface names if required.
    This configuration will tell the ASA that no NAT will be performed for traffic between the VPN-POOL and SERVER-NETWORK. The NAT configuration is bidirectional. With this configuration the Static NAT configurations will continue to work for the servers Internet traffic and this NAT0 configuration will be applied only to the VPN Client traffic.
    Hope this helps :)
    - Jouni

  • Exchange Server 2013 and Remote Access VPN on a single server running Windows Server 2012?

    Just by way of background, I have been installing and administering network servers, e-mail systems, VPN servers, and the like for many years.  However, my involvement with Exchange and Windows Server has been mostly on the forensics and data recovery
    level, or as a (sophisticated) user.  I have never tried to deploy either from scratch before.  My deployment experiences have been mostly with Linux in recent years, and with small private or personal "servers" running such cutting edge
    software as Windows XP back when it was new.  And even NetWare once.
    When a client asked me if I could set up a server for his business, running Exchange Server (since they really want Outlook with all of its bells and whistles to work, particularly calendars) and providing VPN access for a shared file store, I figured it
    could not be too difficult given that its a small business, with only a few users, and nothing sophisticated in the way of requirements.  For reasons that don't bear explaining here, he was not willing to use a vendor hosting Exchange services or cloud
    storage.  There is no internal network behind the server; it is intended to be a stand-alone server, hanging off a static IP address on the Internet, providing the entirely mobile work-force of about 10 people with Exchange-hosted e-mail for their computers
    and phones, a secure file store, and not much else.  If Exchange didn't need it, I would not need to install Active Directory, for example.  We have no direct need for its services.
    So I did the research and it appears, more by implication than outright assertion, that I should be able to run Windows Server 2012 with Exchange Server 2013 on a server that also hosts Remote Access (VPN only) and does nothing else.  And it appears
    I ought to be able to do it without virtualizing any of it.  However, I have spent the last three or four days fighting one mysterious issue after another.  I had Remote Access VPN working and fairly stable very quickly (although it takes a very
    long time to become available after the server boots), and it has mostly remained reliable throughout although at times while installing Exchange it seems to have dropped out on me.  But I've always been able to get it back after scrounging through the
    logs to find out what is bothering it.  I have occasionally, for a few minutes at a time, had Exchange Server willing to do everything it should do (although not always everything at the same time).  At one point I even received a number of e-mails
    on my BlackBerry that had been sent to my test account on the Exchange Server, and was able to send an e-mail from my BlackBerry to an outside account.
    But then Exchange Server just stopped.  There are messages stuck in the queues, among other issues, but the Exchange Administration Center refuses now to display anything (after I enter my Administrator password, I just get a blank screen, whether on
    the server or remotely).
    So, I am trying to avoid bothering all of you any more than I have to, but let me just begin with the basic question posed in the title: Can I run Exchange Server (and therefore Active Directory and all of its components) and Remote Access (VPN only) on
    a single Windows Server 2012 server?  And if so, do I have to run virtual machines (which will require adding more memory to the server, since I did not plan for it when I purchased it)?  If it can be done, can anyone provide any pointers on what
    the pitfalls are that may be causing my problems?  I am happy to provide whatever additional information anyone might like to help figure it out.
    Thanks!

    An old thread but I ran into this issue and thought I share my solution since I ran into the same issue. Configuring VPN removes the HTTPS 443 binding on the Default Site in IIS for some strange reason; just go and editing the bindings, add HTTPS and things
    should be back to normal.

  • I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    Posted in error.

  • How to configure Time Capsule etc as a local network server with remote access server and for backups

    I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
    We've managed to set up a wireless network and both have wireless internet access through the TC
    But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
    I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
    So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?

    But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
    Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
    And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
    Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
    What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
    A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
    One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
    How is the security setup on the TC?
    The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate  but it allows me full access to all the files.
    If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords.

Maybe you are looking for

  • ADOBE FLASH PLAYER PLAY ON IE BUT NOT IN FIREFOX

    I work for years with Firefox, now I have format my hard drive and install Adobe flash player and Firefox again, but Flash player do not work in Firefox, it work only in Inter Explorer, did try all forums and try all the guy`s say there , when I inst

  • Group texts are green should be blue...

    The last week or so, group texts to iPhones that I have been group texting for years are now green---OR some won't even go through! What is going on? Am I being charged for texts that SHOULD be blue?! I rebooted my phone, backed it up etc. By themsel

  • Microsoft excel cannot copy and paste from one excel doc to another one

    I have a user that is on a Windows 7 64-bit machine and he has to different instances of excel open and coping information from one excel file to the other one. He can do it once and then when he tries to do it again excel says, "Microsoft cannot Cop

  • Text arrays (variables) and Dynamic Text Box

    Hello everyone. I have a text file (let's call it sample.txt) that has numerous variables or arrays in this format: &info=This is some information &stuff=This is more stuff &whatever=Even more stuff again.... Anyway, I need to load a particular varia

  • I'm new in java program... ineed help

    i need to post a table to a web page from database using java.. these are the parameters given by my boss.. pls help... SELECT DISTINCT PROD_GRP, NVL(SHIPPED,0) AS SHIPPED, NVL(NET_SCRAP,0) AS NET_SCRAP, ROUND(NVL(TOTAL_ASSY,0),2) AS TOTAL_ASSY, ROUN