Media Sync Doesn't Recognize Device

Just got an unlocked Curve 8320. Inserted a media card, and downloaded Media Sync to my PC, not the whole Desktop Manager. Media Sync now doesn't recognize my device; have tried this tons of times! And, my computer itself doesn't recognize it as a USB drive as well. My device does have the 4.5 software loaded. Is it possible to just drag and drop music files to my microSD card since I can't use Media Sync? Also, does my blackberry have to be connected via USB for me to use Roxio Media Manager? Or can I just insert my media card? Didn't want to download the whole Desktop Manager w/ Media Manager since it already doesn't recognize my device. Aagh!
Message Edited by flamencoqueen on 05-12-2009 05:41 PM
Message Edited by flamencoqueen on 05-12-2009 05:47 PM
Message Edited by flamencoqueen on 05-13-2009 12:27 AM
Message Edited by flamencoqueen on 05-13-2009 12:30 AM

Windows Vista
Have not tried another cable, but the phone CAN charge using this same cable
Laptop computer
Using side USB port, have only 2 on the side
Under Universal Serial Bus Controller: Intel Family USB Universal Host Controller-2830, plus other prior ones installed
USB Root Hub
Also, I do not have Desktop Manager or anything else downloaded. Without having that stuff, should my computer be able to recognize my Blackberry; at least as a USB drive?
Message Edited by flamencoqueen on 05-13-2009 12:42 AM

Similar Messages

I have a big problem. I lost my other device, and Sync doesn't recognize my Recover Key, even if I generate a new one. What to do? I have all my bookmarks there

''dupe of https://support.mozilla.org/en-US/questions/934696 - locking''
The Sync doesn't recognize my Recovery Key ("Wrong Recovery Key") even if I generate a new one. What to do?

If you have generated a new Recovery Key, then unfortunately the account data that you had before is gone (Sync will wipe all data before creating a new key to ensure it stays secure). So unfortunately at this point, unless you have a backup of your data somewhere, it is inacessible.
[[I've lost my Firefox Sync account information - What to do]]

ITunes sync doesn't recognize changed groupes in Address Book

iTunes sync doesn't recognize changed groupes in Address Book. What to do?
I've cleared All Contacts on the iPad2 so it is blank now. I want to sync just a particular new group which is the combination of two former groupes which didn't sync correctly.

To be more clear (in hopes you can get it to work!) :
Under Mail -> Preferences -> Composing
1. Be sure to CHECK the box that says autocomplete addresses under the Addressing heading.
2. Quit Mail and restart.
If that doesn't work then I would suggest quitting Mail and trashing the Preference file (~/Library/Preferences/com.apple.mail.plist). Then restart Mail and make sure the box is checked as above and restart Mail. Note that all preferences will be reset to the default and you may need to reconfigure Mail the way you like it. You can always drag the plist file back and restart Mail.app to restore your previous settings.
Ed

Media Sync Doesn't Work for Mac

"Whether it's a specific iTunes® playlist or a random mix of tunes, it's easy to sync the music from your Mac computer to your BlackBerry smartphone."
That's how Blackberry describes Media Sync. Unfortunately, it doesn't see any of my iTunes playlists and always gives me the error "Exceeded Memory Limit" regardless of the free space available.
My Mac OS is 10.6.4 (Snow Leopard) and I have the latest version of BB Desktop Manager which has Media Sync integrated. I've seen this complaint on virtually every BB forum - has anyone managed to make it work?
I really think that this is a serious misrepresentation of the software's capabilities and I shouldn't have to resort to third-party apps after what I'm paying for the phone and the service contract.

Hey ARM77,
Welcome to the BlackBerry Support Community Forums.
There is a few things I will suggest to hopefully fix this issue for you.
1. Is mass storage mode currently enabled when you hook your BlackBerry to the Mac? If not please read KB13564.
2. Is your iTunes updated to the very latest version?
3. Verify that your media card has a sufficient amount of memory available for the playlists. To check this, perform the following:
In BlackBerry® Desktop Manager, click Device Options. On the Media tab, decrease the amount of memory that is kept free for files other than your music files.
than your music files.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

ITunes 11.0.4 Doesn't Recognize Devices

I've recently updated my itunes and plugged in 2 iphone 4Ss and two iPads, iTunes doesn't recognize any of them. I've restarted, reset, etc. I'm running 10.8.4 on my iMac. iPhoto does recognize all devices so the connection to the computer is proven OK.

I had the same problem
Just redownload the 11.0.4 update and itll work fine and sync. Dont delete itunes just redownload the uodate. Goodluck

Iphone in recovery mode and DFU mode but PC still doesn't recognize device

HELP! My iphone 4 just keeps blinking the apple logo for hours! I tried the recovery mode and DFU mode, the first time went well, but it started to blink again after I restored it. Now I'm doing the same steps going to recovery mode and DFU mode, they work on the phone but for some reason, my laptop doesn't recognize any device connected. I tried everything on the internet and still wont work. WHAT CAN I DO???
by the way, Mine is windows 7.

it needs repair
Peace, Clyde

Media Sync doesn't offer option to sync Camera Photos.

I was trying to setup Link to sync my camera photos back to my desktop via wifi. When I get in range the mapped drives of my Z10 appear as Y: and Z:. My camera photos are then accessible via Y:\camera (which is TOO COOL by the way). But, when I go to Media Sync to add those photos for syncing, my only option is {MyDeviceName} to Sync to. There is not a way to actually select the path that will by synced.
Therefore I don't get y:\camera as the sync path, instead I get y:\photos\camera. My only choice, again, is {mydevicename} so the choice to select y:\camera isn't available.
Maybe we could get the option to select a path, or maybe a 4th media option would be "Camera" to go along with Photos, Videos and Documents.
Loving My Z10, but wishing for more.

Windows Vista
Have not tried another cable, but the phone CAN charge using this same cable
Laptop computer
Using side USB port, have only 2 on the side
Under Universal Serial Bus Controller: Intel Family USB Universal Host Controller-2830, plus other prior ones installed
USB Root Hub
Also, I do not have Desktop Manager or anything else downloaded. Without having that stuff, should my computer be able to recognize my Blackberry; at least as a USB drive?
Message Edited by flamencoqueen on 05-13-2009 12:42 AM

Media Encoder doesn't recognize Behringer USB mixer

I just purchased a Behringer Xenyx X1222USB mixer to use for live stream events using Flash Live Encoder on my MacBook Pro. Flash Encoder doesn't recognize the USB input from the mixer. Other I know the computer recognizes it since I went into the Audio Settings and can see the USB input there with audio levels.
I use Yosemite platform. Any help needed as soon as possible.

So, it looks like Media Encoder is stuck in a trial version? The only formats available are indeed .f4v, .flv, .mp3 & h.264. Is a reinstall of Media Encoder the fix?

Media Sync won't recognize iTunes

I have my new Storm, BB Desktop Mgr v4.7 and Media Sync 2.0.0.20. I have iTunes 8.0 loaded on my Parallels running MacBook Pro on both the Mac Side and the PC side and Media Sync is telling me I have to first load iTunes. It also will not allow me to select "options". Any ideas?
Also, will the Storm recognize the iTunes music or only what can be converted to MP3?
Thanx!

Ipod touch sync with itunes ONLY.
"Adding music and other content to iTunes"
http://support.apple.com/kb/HT1473

FCP doesn't recognize device

Suddenly I can no longer capture clips because my computer doesn't recognize the capturing device(s) (Sony GV-D1000).
I have tried this on two of my computers with two different capturing devices.
I suspect some sort of download upgrade is the culprit as it is suddenly happenning on two computers.
All of the firewire ports recognize other external hard drives (Under System Profile/Hardware/Firewire) but not the GV-D1000 or the PD150 camera, and so it appears that the ports are okay.
User groups say to remove the QuickTime receipt files - I have done this.
The A/V -> DV Out is set to off.
Computers are G4 and a Power Book.
Is there a QuickTime update or some other recent update that would cause this? What else should I look for? How do I get rid of the upgrade?
If I need to uninstall and reinstall QuickTime Pro, which I have already paid for, how do I do this without paying for QuickTime Pro again?
Power Book Mac OS X (10.4.9) FCP HD 4.5

Hi:
You can try this:
http://docs.info.apple.com/article.html?artnum=301852
Hope that helps !
Alberto

Vision M need tech: freezing during sync/doesn't recognize progr

Until about 3-4 days ago I had no problems with my vision M 30gb. Well now it keeps freezing. I have reset it several times, reformatted it and still have the same issue after I try to sync files back to the device, Here is the situation, once I connect to the computer it will recognize it for about 5 seconds then it freezes at the docked screen. If I unplug it sometimes the player will be fine and other times I have to do a hard reset. I reformatted the device and have proceeded to add my music files back to the player but it is at that stage that it begins to freeze.
I can get into mediasource, the sync manager or source media and onto my player independent of each other but when i connect the player to the computer it is as if the program and the device do not recognize each other. I can open the media programs but once I connect the player they all freeze and as soon as I unplug the player the programs start working again.
I was able to update the firmware but even that was a problem and I had to reformat the player to get that to work. I am using Vista opperating system but I have been using the player with this system for about 3-4 months so that is not the issue.
I am at my wits end about this situation especially when the player costs as much as it has only to work for aprox 5 months.

Hi
Sorry to having problems. Freezing can occur sometimes with corrupted data (songs) but you said in the post that this happening even when you dock.
I realise you probably have done this already but I would re-format the player. Then in rescue mode (hold own the play button and turn on) try the reload OS option again. You'll need to download the firmware from our site and when you reconnect the player you can then run the firmware file.
One other thing as a diagnostic step - you could set the player up as a removable disk (in the Extras on th4e menu). if the player is still freezing it is will be a hardware problem.
John

Syncing doesn't recognize my laptop

For some reason my iphone decided to no longer recognize my itunes library, as my itunes library.
If you go into settings>general>itunes wi-fi sync : you see User's MacBook Pro twice. One that synced today, one that synced a few days ago
The old one is syncing tones/music/movies/podcasts/itunes u, books, and app
New one is syncing photos
How can I get this to only be one sync? If I uncheck sync over wifi and restart, when I try to click any of the sync boxes, it wants to delete everything on the phone, which obviously I dont want to do.
Any Ideas?

iOS: Device not recognized in iTunes for Windows - Support - Apple
You have to be running iTunes 11 now if you are running iOS 7 on your iPad.

Adobe Media Encoder Doesn't recognize .prproj files

I am absolutely losing it here. I have read posts on various forums for hours, not only can I not find a solution, I can't find anyone who has this same problem. I'm running CS4 on a Mac and when I try to export from premiere, Adobe Media Encoder opens, then nothing happens. The file is never added to the queue, it just sits there. If I open Adobe Media Encoder manually then click add and try to select a premiere project, the file is grayed out. I changed the dropdown menu for file types to be "all types" and I click on a premiere file and it just pops up an error message saying the file cannot be imported. Same thing if I try to drag the file in. I can do absolutely nothing with AME.
I've seen plenty of people saying AME crashes midway through rendering or people saying they get an error saying to check if the source has been moved or deleted. I don't get any of that. I have nothing. It doesn't show up in the log or errors in any way.
The most annoying thing is that it used to work. I exported several files this way. I did not change any settings though, I even went and restored all the default settings. Still nothing. Its not just the one file, I've tried lots of different files, none work. I even reinstalled premiere, after effects, and AME and nothing changed.
I'm at a complete loss and I need to get work done and I wish I could post lots and lots of curse words here...

Hi,
I use CS3 on a PC so I've no experience with mac problems...
However, even if I had a mac I would ask you first a little more about your computer....
I have heard of memory chips going bad on a computer and suddenly that causes things not to work...but there's no sense just guessing...
Try to tell as much as you can about your computer and about the assets you are using.
Since it used to work and now it doesn't , can you think of anything you added or changed on the computer ?
Sometimes adding software or codec packs or hardware can sorta change things on your computer enough to make weird things happen...
Anyway, give as much info as you can
I think there's threads here about what sort of info would be best to supply if you don't know much about your computer ...
Rod

Wifi sync does not recognize device, unless I rename it.

Wifi sync with my iPhone 5 was working fine. Then, out of the blue, it stopped showing up in iTunes. I tried all the trouble shooting I would find here and on Google and nothing. Then I renamed it from "Marcelo's iphone 5" to simply "iPhone". Then it showed up! I tried renaming it to "Marcelo's iPhone" and it still showed up. So I decided to try the original name and changed it back to "Marcelo's iPhone 5" and it disappeared again... Why?
I want it named "Marcelo's iPhone 5" and nothing ele. My iPad is named "Marcelo's iPad 2" and it works fine. I want all my devices to follow this naming structure.
How can I make iTunes forget all my wifi sync devices so that I can name my devices whatever I want and still have it sync over wifi correctly?
I'm using iTunes 11.4 on a mid 2012 13" MacBook Pro
My iPad 2 and iPhone 5 are both using iOS 8.0.2

iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing - http://support.apple.com/kb/TS4062
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
Device not listed immediately after upgrade - https://discussions.apple.com/thread/6573744 - try restarting
LincDavis July 2014 post on resetting sync services when iTunes not responding - https://discussions.apple.com/message/26308435#26308435

Roxio Media Manager Doesn't Detect Device

My computer runs Vista Business and I have 8130 Pearl. I don't understand why the software isn't recognizing the device, please help!

I have been advised by others on this forum to use DM ver 4.6 WITHOUT Media Manager as that is the best version for the curve. 4.7 was released for the Storm and other users have experienced problems with it on the curve. These are the steps I followed:
1. Make sure you back up your device first.
2. Uninstall the Desktop software through the Start - Settings - Control Panel - Add/Remove Programs - Blackberry Desktop Software - Uninstall
3. Then empty the recycle bin, restart your computer and go to Blackberry.com - Software - Blackberry Desktop Software for PC's - Download - DM 4.6 without Media Manager.
4. Download and install DM version 4.6 without Media Manager.
Once that has been installed, use 'drag 'n drop' to copy your music from your pc to the music folder on your BB. Do this in Windows Explorer or 'My Computer' or whatever you call it. Also, any DRM files will not play on the BB, I believe this is because of the digital righs issue on music files.
Hope this helps. Be patient and keep coming back as someone is always here to help
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Media Sync Doesn't Recognize Device

Similar Messages

Maybe you are looking for