Media Sync "dropping out" with 8520

I have a 16GB microSD card in my 8520. When I try to sync music via itunes playlists and the BB Desktop manager, evry few minutes (or less!) a box pops up from Windows 7 asking if I want to scan and repair the F drive (SD card in the BB), or continue without scanning. Whichever option I choose it seems to come back after a few minutes again, and every time it does it interrupts the sync process and I have to start again. Any ideas?
ta
dq

Similar Messages

HT4623 I am trying to update my i-phone 4 with IOS 7.1.1 it has twice got 400mB in to the 1.3GB update and then dropped out with an "error has occured" message.....any ideas?

I-phone 4........I am being auto-prompted to update my IOS from 7.1 to 7.1.1. Each time I try to do that on i-tunes it gets to about 400Mb of the 1.3Mb file and then drops out with an "error has occured" message. I have 5Gb free space on the phone. I have tried to do that wirelessly also and it says "an error has occured while checking for a software update"........does anyone have any ideas?....thanx

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Broadband dropping out with Homehub 3

A normal 6Mb/s + service drops out several times an hour with no connection for several minutes. I have spoken to a BT customer care engineer, restarted the modem etc with no success. Wireless indicates a strong signal at all times.
Same problem with ipad, and android tablets.
Any suggestions?
Solved!
Go to Solution.

Thanks I'll do that.
Here are the figures:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 06:20:36
Downstream:
7.938 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
11.1 dB / 24.0 dB
Line attenuation (Down/Up):
19.7 dB / 9.5 dB
Output power (Down/Up):
19.9 dBm / 11.9 dBm
FEC Events (Down/Up):
0 / 148
CRC Events (Down/Up):
57419 / 169
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
913659 / 159
Error Seconds (Local/Remote):
10422 / 2439
Speedtest;
Download speedachieved during the test was - 7.05 Mbps
For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
Additional Information:
Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 7.15 Mbps

Best Xtreme Config to avoid drop-outs with multiple gadgets?

Hello, I've purchased a brand new Xtreme to work with a Thomson SpeedTouch ADSL modem, 2 MacBooks (2yrs old), 2 iphones, ipod touch, 2xWiFi Radios and 4x Digital Phone handsets. The intention is to avoid IP lock-outs and signal drop-outs - does anyone have the best configuration to achieve this? I've set it up and it appears to be working as I'm not suffering lock-outs ("!" over the WiFi signal) but it still drops-out? Thanks in advance.

Hello, I've purchased a brand new Xtreme to work with a Thomson SpeedTouch ADSL modem, 2 MacBooks (2yrs old), 2 iphones, ipod touch, 2xWiFi Radios and 4x Digital Phone handsets. The intention is to avoid IP lock-outs and signal drop-outs - does anyone have the best configuration to achieve this? I've set it up and it appears to be working as I'm not suffering lock-outs ("!" over the WiFi signal) but it still drops-out? Thanks in advance.

Audio glitches/drop outs with Guitarport/Gearbox

I'm using Guitarport with the Gearbox software. My speakers are plugged into the headphone jack of GP, and I'm using GP/Gearbox as my default audio. The problem is that whenever I do this, there are audio problems, such as glitches/skips/drop outs. However, when I plug the speakers straight into the computer's headphone jack, there are no problems. So is Gearbox using up too much PCU or whatever? There is supposedly a "Processor Performance" setting for the OSX, but it is not there. I'm using a MacBook pro.

Make shure you sample rates and buffer sizes match. Check AMS or Sound in pref.> after application launch, sometimes it will flip automatically. Master then Slave i think > you might need more usb power

Drop outs with incoming phone calls

My Broadband drops out when I get an incoming phone call. I've changed the filter (twice) but it hasn't resolved the issue. It seems to be OK with outgoing calls, and doesn't always drop with incoming calls - just about 90% of the time. Anyone got any ideas?
Thanks
Judy
Solved!
Go to Solution.

then you have a high resistence fault and need to report a phone fault and get it fixed before you will improve your broadband
phone faults
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Why does my wi-fi keep dropping out with Lion ?

Why does my wi-fi keep dropping out since I purchased Lion?
Why does my wi-fi preference keep getting lost every time my computer goes into sleep mode?
Is there any way of killing the Lion and getting Snow Leopard back.
Signed,
Tim (Had a flawless computer until I purchased Lion!) Lyke
< Edited by Host >

I use homeplug powerline adapters to create my home Lan. I've never had any problem with my ATV 2.
This isn't ideal either, I would rather have shielded CAT7 cables reach all the way to my modem.
Either way, wired solutions are more reliable and have a higher potential speed as wireless uses pulsed electromagnetic radiation as a means for transportation in stead of copper or fiber optic cables
The World Health Organization's IARC has recently classified radio frequency electromagnetic fields as possibly level 2 carcinogenic to humans, concluding:
"the evidence, while still accumulating, is strong enough to support a conclusion and the 2B classification. The conclusion means that there could be some risk, and therefore we need to keep a close watch for a link between cell phones and cancer risk."

Drop-outs with Airport streaming iTunes

hello all and merry Christmas
I am streaming music to two Airport Express from a hard drive mounted to an Airport Extreme base station. I have the latest versions of firmware and iTunes. iTunes will randomly drop-out and it's driving me batty.
I know it's not a network related issue (ie .... interference from other networks or phones) as I can stream the Expresses using Airfoil without drop outs. The problem only occurs with iTunes 8 as it didn't occur in version 7. I've searched for comments and read as many threads on these boards as I could find but haven't found the solution.
I have based my entire music system on the basis of streaming as described above.
Any ideas?
Thanks in advance for your thoughts,
Warren

I have recently installed 2 airport expresses, and use them with a wire router from Thomson (SpeedTouch). I have had a number of these drop-out problems, and discovered that there is a lot that can cause network interference. After checking a number of things these problems have now been significantly reduced:
1. Make sure that multicasting is on on the wireless router. Since I don't have an Apple Airport base station, I needed to find the setting for this in my SpeedTouch setup, which was off by default.
2. Set the network to operate on a channel not used by any nearby networks. I live in an apartment building where nearly everyone has a wireless network. Using the iStumbler app I could determine which channels other networks were using, and pick one that wasn't in use.
Of course, interference can also be caused by nearby power transformers, phones, etc. In my case my microwave cuts out my Airport Express, but that I can live with.
To test the reliability of the streaming to Airport Expresses, try the following:
1. Find the Airport Express IP number in the Airport Utility
2. Open up Terminal
3. Type "ping <ip-address>"
4. Let it run for a nice long time, then type cntl-C
5. You will now see in the text in the terminal screen the % of data lost. If this is high then you need to continue troubleshooting your network.
Hope this helps somebody .. I have a frustrating time figuring it out for myself.

Audio pops/drop-outs with AU bandpass

Even after I render and do a audio mixdown, I occassionally get audio pops or drop-outs (one channel or completely) of audio files to which I've applied the AU bandpass filter. Is there a way to solve this?

Make shure you sample rates and buffer sizes match. Check AMS or Sound in pref.> after application launch, sometimes it will flip automatically. Master then Slave i think > you might need more usb power

Audio drop out with sharing

imovie 4.01 g4 533
when sharing movie for cd-r
in saved/shared file audio i great for first 10 minutes then drop out completely
what am i doing wrong?

If you're using music purchased from iTunes, you'll need to import it into iMovie in a different manner. Put all the desired songs in a playlist in iTunes and Burn the Playlist to Disc. Use the option to Join CD Track and import this music back into iTunes. This new version will import and play more consistently.
John

Media Sync Playlist loaded with "no songs"

Hi. I was able to successfully get media sync to work from XP to my 8830. However, when I open a playlist I synched, it shows "No Songs". If I "expore" music files I find a new folder "Media Sync" and the playlist and songs are there and playable. However, I can only see the playlist and can't play it or see the songs going through the normal menus on my World Edition. I appreciate any suggestions!
Solved!
Go to Solution.

I had a similar problem on my 8330. I loaded songs from iTunes using BlackBerry Media Sync. It worked fine for a while then suddenly "no songs" using Media player on the BB. The songs were on the media card and I could play them from Media, Explore.
I tried every thing in every forum I could find. Nothing worked until I reformatted the media card from Options, Format Card. In re-synced and now all is fine.

EA 6500 Media Server Drops Out

Media server works great until I get "Connection Lost" It requires a restart of the AE6500. I have tried stopping the media server and restarting then rescaning but this usually does not help. The FTP function does ot have this issue while streaming music. It only happens streaming Movies. I thought this was just a media server issue since it happens on the Roku (I have two) using its media app. But as it turns out, it also happens using plex on both the Samsung and Rokus (The PLEX media server is on my computer). Usually it only happens once and is fine after the router restart. USUALLY. It happened 4 times last night.
Any Ideas?
Thanks

You might reload the FW and set up from scratch and see if you can stablize it.
To safely update FW, I recommend doing the following:
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
Are you streaming via wired or wireless when this happens?

Media sync to Pre with Windows Media Player

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

OK i was having the same problem. But, what i did was connect my pre to the pc, when doing so my phone asked me to either choose mdia sync, usb storage, or charge. Normally i thied to do media but instead I choice usb storage and also opened on windows media player. This time when wmp opened it asked me to set up my device and sunced what everi wanted to sync seemlessly.
hope this helped

ITunes Sharing Drops out with Xserve G5

Hello All,
I have an Xserve G5 running 10.4.11, and clients running 10.4.9. We're running iTunes 7.5 everywhere. The server sits on a university network, but does dole out IP adresses for a subnet existing in a computer lab. So, I am using the server to do some iTunes sharing, which are listening assignments for a class. To my knowledge, this is the only way to share the same iTunes playlist with the university and my computer lab's networks.
Problem is, iTunes doesn't show up in Macs that are booted up after the Xserve has already launched iTunes. Any computer that was launched before the Xserve iTunes launched can quit and relaunch iTunes, always finding the share. But reboot the client, and the shared iTunes cannot be found.
Interestingly, say the Xserve iTunes is showing up fine everywhere. If, on a client, I open the local iTunes preferences and turn OFF sharing (both looking for share and sharing local with others) and then turn it back on again - the Xserve iTunes disappears from EVERY client.
Did I miss a setting somewhere? It's very buggy, and random. There may be other things that make the Xserve iTunes disappear, but this is the only method I've found to make it happen while I'm watching.
We have a few clients sharing iTunes on the university network, it is always rock solid. So there is something about the server that is making this happen. Anybody have any thoughts on this? I really appreciate all ideas.
Thanks.

To add, just tried sharing iTunes with Network Beacon, to no avail. Then I get two iTunes shared, but both behave in the same way.

WRT54G Dropping Out With EZXS88W Switch Plugged In

Hey everyone. The issue that I am having is that when I connect my Linksys EZXS88W switch into the WRT54G router, the router keeps crapping out on me. What it does is that all of the lights go out on the router, then comes back on every minute or so. What could cause this to happen? The router works perfectly fine when the switch is unplugged from the router. I also connecte the swtich to the router through the normal port, as well as using the uplink port, but alas, the same results occur.
Could there be a specific setting on the router that I need to configure so that the router communicates properly with the switch? Also, the switch is brand new, right out of the box. I figured it would have been just plugging it in, and away it goes. Sadly, that is not the case.
Any help would be greatly appreciated!

From what you described I assume it's the issue with your switch because if you don't connect the switch your router works fine...Your switch does not even have a reset button...
You can however power cycle the router and then the switch when you connect them both...

Media Sync "dropping out" with 8520

Similar Messages

Maybe you are looking for