Media Widget missing Start/Stop Sliders

I have seen video tutorials on inserting Media widgets in iBooks Author that show the Start/Stop Slider for controlling start and stop frames in the Widget Inspector. However, these sliders DO NOT show up in the Widget Inspector in my iBook when selecting one of the videos I have inserted. Poster Frame, Repeat and Playback controls are all visible in the Media widget as they should be. I am using Author version 1.1 (190). Any help out there?

Not the scrubbing slider, the Start Frame and Stop Frame slder in the Inspector just above the Poster Frame slider (where you select the frame you want as the display frame). The tutorial I saw (http://www.youtube.com/watch?v=qzk9pyBnhTU) shows this addition slider in the Inspector box. Either it used to be there and isn't any longer or my version of iBook Author is not current (which I doubt but here is the info from my original query: version 1.1 (190)

Similar Messages

Start / Stop your xMII 11.5 Server with a Widget !

<b><a href="/people/abesh.bhattacharjee/blog/2007/04/23/start-stop-your-xmii-115-server-with-a-widget">Start / Stop your xMII 11.5 Server with a Widget !</a></b>
Download it <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/b05124b1-70d4-2910-99b7-ab6626d31aac [original link is broken]">here</a>...

Hi Tim,
try to open the Java Web Start program (should be in C:\Program Files\Java\j2re1.4.2_07\javaws\javaws.exe), go to File > Preferences and under the 'Proxies' section in the 'General' tab, select 'None'.
Then close all open browser windows and try again...
Note that disabling proxy servers in the Java Web Start tool will not affect normal Java Applets, which are handled by the Java browser plugin which comes with its own proxy configuration screen. If you company uses a proxy between its LAN and the net, the above setting will stop your uses from running any Java Web Start applications, such as BLE, but not very many people use these anyways, so the impact should be minimal.
Good luck,
Sascha
P.S. If your users also have the JDK, then the javaws.exe binary is also found in C:\j2sdk1.4.2_07\jre\javaws.
Message was edited by:
Sascha Wenninger

Ibook Author audio (AAC) media widget rejected in validation??

We have a complex image, video and music book from the Arctic created on ibooks author. Everything seems to validate through itunes producer on delivery except for this error message.
ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/Arctic_master_music.m4p" at Book (MZItmspBookPackage)
We've done everything in widget sizing, placement, audio encoding to aac from QT, itunes and compressor. We can't get past there error? Is there a bug in the ibook author or am I missing someting.
Any ideas. The videos work fine, just the audio clip/
richard

John, as you can see by my previous response we haven't solved the audio error ITMS-9000, audio outside of widget. But we haven't forced the issue as of late.
We had so much video with audio, that we pulled the page with the music pieces. Our idea was to see if the book without the error on the audio would pass and it did. We had to make some other corrections and link fixes, but the video and images all passed. I was impressed that someone was actually going through page by page.
So once the book is up, we're going to start with the music (audio only) from scratch, strictly following the process that apple outlines. We will resubmit it and if it won't pass the error, then I have only one specific issue for myself and apple to deal with. I have a feeling it's something I'm doing in the music conversion, but we've compressed it from QT, from iTiunes and from compressor following their guidelines all with the same error of this audio placed within their media widget. Now maybe with their recent ibook author updates things have been fixed. See I have this little feeling it's a bug in ibook author compiler. But over many years where I jumped out and blamed someone and been wrong, I have to be sure it's me and not them.
So if anyone has had success in audio only book elements placed in ibook author media widget and successfully got it published, tell us your secret. Please. Or if others are having the same issue, then we need together to find an answer quickly.
Once I find the answer on this issue I'll be sure to post the steps to our success.

"Adobe Media Core CS6 has stopped working" error.

I have had Premiere Elements 11, Photoshop Elements and LR 4 installed for over a year on my Windows 7 computer. Over the last couple months, within a few minutes of turning on my computer I get an error that Adobe Media Core CS6 has stopped working. It seems like this might be related to Premiere but I have not been able to find a solution. This occurs even if I have not run any of my installed programs. Any suggestions what is causing this and how to fix it?

I had not saved the detail files earlier today (it appears they disappear on a restart), but did a shutdown/startup a short time ago and had a recurrence again. (Although two subsequent cycles did not generate the error.) I saved the files and the .xml file indicates the parent process was Elements 11 Organizer this time, not LR4.
I had been living with this problem for a while, one of the set of saved error file sets was from 5/1. I don't recall for sure if that was from the first occurrence of the error, but I decided to look for other programs installed just before that time. I see that Adobe Creative Cloud was installed the day before, 4/30. I don't recall how/why that was installed since I don't have any Cloud products. Also installed on 4/30 were three Microsoft Visual C++ Redistributable files, which show installation times one minute before the Creative Cloud installation, so I assume they are part of the Cloud installation. The next most recent (before 5/1) installed program was Smith Micro Anime Studio Pro 9.5, which was installed on 4/29.
The firewall settings have not changed. I was in a chat with my ISP when the problem occurred this afternoon, but not during the latest occurrence. I don't recall any updates since 6/24. I believe the error had occurred every time I started my computer before the Firewall changes, but it seems to be more sporadic now.
I will see what else I can come up with tomorrow since it is getting late. I wanted to get this all down before I lost my thoughts.
Update 7/5:
I have more information, but still no solution.
I found this thread Adobe Media Core CS6 has stopped working related to the same error, but it had no solution. The error did not occur when I exited PS Elements or Premiere Elements as it did for that person.
I also found Adobe media core cs6 stopped working......??? and tried the steps to rebuild the Photoshop Elements editor preferences file, but no success.
I had noticed that Adobe Creative Cloud was installed the day before, so I uninstalled it. Error still occurred.
I installed a different firewall (Zone Alarm Free) and disabled Windows Defender, error still occurs.
Uninstalled Anime Studio Pro (that had been installed a couple days before, error still occurred.
I will provide more updates as I try more changes.
Update 7/20:
More things I tried:
Repaired quicktime via control panel, did not fix
Uninstalled quicktime, error did not recur
I noticed that there remained a plug-ins folder in the quicktime folder, so I renamed it.
Reinstalled quicktime from Apple site on 7/12 and the CS6 error has not recurred.
Additional info not directly related to original question, but occurred afterwards.
I don't think it is related, but a few days later started getting a small blank MFC CTxfiHlp window upon windows startup. I haven't resolved that yet, but it is related to my Creative XFi sound card.
I also noted when I reinstalled Anime Studio Pro that the readme contains a warning that 64 bit windows does not support quicktime; that I should use the 32 bit version of their software.
I installed the latest Creative sound card software, but started getting lockups. Still working on this, but the original problem seems to be solved.
The only other thing I can think of is that iTunes software had been installed, but I removed it. It is possible that caused a problem with quicktime??
Anyway, the removal of quicktime (including the Plug Ins) and re-install did resolve my problem.

How to start / stop nodes without domain-controller / automatically on Win?

Hi,
we have a distributed installation of CMSDK 9.0.4.
We have installed a 9.2.0.4 Database on Solaris and we are using the 10g(9.0.4) Infrastructure on Solaris with it.
The first installation of CMSDK uses a J2EE-MidTier installation on the Solaris server and contains the CMSDK domain controller and a normal node with nfs protocol server running.
The other installations are done on Win2003 Blades. Currently we are using two Blades. On each there is a J2EE-MidTier installation and within these we have installed CMSDK with HTTP-Node and normal node. We are using NTFS-Server within the normal nodes.
The Blades are within one Domain and we have NLB-Cluster activated for both.
The whole thing sounds complex, but it works fine. We only have some trouble regarding start/stop of the nodes:
1. If the solaris backend fails, our cluster-configuration tries to stop and start cmsdk. While stopping cmsdk, all nodes - even those on the Win-Servers - are stopped. But starting does not bring em up again automatically.
2. If a Windows Server is booted, the normal node does not start automatically.
3. If one Windows Server is not available, the ifsctl check takes a very long time because it's trying to get information from the missing one.
Is there a way to restart the domain controller and node on solaris without stopping the nodes on Windows?
How can we start the windows nodes automatically after reboot?
Is there a way to probably start the nodes without being managed / guarded by the domain controller?
Thanks for help,
Alex

Try adding this script to your /etc/init.d directory:
#!/bin/sh
ifsctl start << EOF
<ifsctl password>
EOF
Replace <ifsctl password> with the password that you would give at the prompt.
It will complain about Inappropriate ioctl for device, but it works.

DV Start/Stop detect with iMovie

http://discussions.apple.com/thread.jspa?forumID=936&threadID=557928
Because this thread was marked solved I can't add to it.
I think the problem is the rendering as you surmised. There is no way to fix this problem because of the way iMovie works. It captures without timecode so every clip begins at zero. Once you've rendered the material and moved it to the browser the render file looks to the TC on the clip to sync up. Once it's broken up every subclip starts with zero because it has no inherent timecode so the render file associated with zero TC links to every subclip.

Hi Tom,
thanks for addressing that topic again (I had just marked it "solved" because it was open by a long time...).
I see what you mean: since there is no TC in the .dv from iMovie there is no way to sync the audio render file and the subclips. Another interpretation is that DV Start/Stop Detect applies only to the original .dv media, not to audio (item level) render file created in the timeline, so FCE cannot associate different sections of the audio render file to the corresponding subclips.
But now that I read it again... I think we are just saying the same thing!
And you are suggesting a feedback would be useless.
Thanks anyway
Piero

'Windows Media Center Receiver Service' stops and cannot be restarted

Hi,
I have had some issues with running my Hauppage TV Tuners (WinTV-HVR-2200) on a new Windows 7 Home Premium Installation.
After installing the TV Tuner card, drivers and WMC support software - I am able to configure my TV channels through Windows Media Centre and all is working fine. I can watch and record TV, so it all seems to be OK. It is only AFTER I restart my computer
that I get an error 'Viewing/Listening Device is currently not available' when trying to watch TV in WMC again.
I troubleshooted this issue and found that 'Windows Media Centre Receiver Service' was not running and when I tried to restart the service (via services.msc) it comes up with the following error:
"0x80070003: File path not found"
I have checked the Windows directory for ehrecvr.exe (the file that the service is linked to) and it is not corrupted or moved but I cannot re-link or restart the service.
I tried the following tasks to remedy the issue and none of them were successful:
Run SFC from cmd prompt - no issues were found
Changed the 'logon' details for the service from Network to Local
Changed the start type of the service from manual to automatic
Restored previous versions of windows - prior to windows updates
Re-install TV Tuner drivers and software
Updated to the latest drivers and software version of 'WinTV' (Hauppage TV Tuner Software)
Complete new installation of windows, including a format of the HDD - without installing additional third party software or anit-virus software
Re-seat the TV tuner in a new PCI slot
The only way that I am able to remedy the issue is if I disable and then re-enable WMC via 'optionalfeatures'. This then allows the service to start again, I can then configure my TV tuner in WMC but it still has issues after restarting the PC!
It would appear that by configuring the TV tuners in WMC, it causes a conflict in the service so that it cannot be restarted after it is stopped. Note: I can start/stop the service with the TV tuner cards installed on my PC - it is only when I configure
the TV channels in WMC that it then has issues.
I have had these TV tuners running without any issues for over 2 years; however I have upgraded the motherboard and CPU and this issue has only just started happening. I am at a loss of what to look at next...
Any help would be much appreciated!
Thanks

I shall suggest you :
1. uninstall WinTV software and reinstall WMC from the scratch.
2. Disable AV or any other internet security application during configuring WMC.
3. Update the TV Tuner card driver from Hauppage's website (only WMC driver and no other application)
Run Setup Again.
Open WMC > Tasks > Settings > General > Windows Media Center Setup > Run Setup Again
Does it help?
If the above doesn't help then try resetting WMC:-
Open Control Panel > Uninstall a Program > Turn Windows Features on or off > Scroll down to Media Features > Uncheck the box against Windows Media Center > Follow on screen instructions > Reboot > Again open Turn Windows Features on
or off under Control Panel > Scroll down to Media Features > Check the box against Windows Media Center.
Now reconfigure WMC again
S.Sengupta, Windows Entertainment and Connected Home MVP

DV Start/Stop issue with DVC Pro 50

Hey guys/ladies... I'm editing with Final Cut studio 2 (FCP 5) and i want to use the "DV Start/Stop Detect" feature. I'm capturing video with the DV50 NTSC 48KHz codec, however, when I try to use the DV Start/Stop Detect function, it gives me an error that reads "The clip you have selected does not reference a movie that can be analyzed". I've brought this video in via FireWire, and I see in the manual that it should work with DV, DVCPro, DVCPro 50, and DVCPro HD... The deck i'm using is the Panasonic AJ-SD93P (DVCPro 50), and the camera for aquisition is Panasonic AJ-SDX900P (DVCPro 50). What am I missing?
G5 Mac OS X (10.4.9) 2x 3GHz Dual-Core Intel Xeon

Ah! the operative word here is "may"... it's bad information I believe. The camera has to have a time of day code function recorded in the signal or it won't work... and only the consumer/prosumer level cameras have this feature. If you can't superimpose the time of day and date over the picture in the recording mode (like consumer cameras do) this isn't going to work.
FCP reads this code and when it detects a break in time (every time you pause would be when this happens) it can place the markers. But if the feature isn't on the camera, FCP can't read it. I've never read nor seen this work on anything but DV 25 recordings... and then only if the camera has the time of day capability.
Jerry

Http server start/stop process

Hi
I always see below start/stop messages in the D:\app\Oracle\opmn\logs\HTTP_Server~1
We are not stopping/starting anything. Does it mean that the http server stop/start itself ? Will this affect users ?
12/06/07 23:18:12 Start process
12/06/26 10:03:03 Stop process
12/06/26 10:04:05 Start process
[Tue Jun 26 10:04:05 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/06/29 11:52:06 Stop process
12/06/29 11:53:08 Start process
[Fri Jun 29 11:53:09 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/03 08:54:18 Stop process
12/07/03 08:55:20 Start process
[Tue Jul 03 08:55:21 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP-Server running...
12/07/11 23:25:45 Start process
12/07/14 12:38:15 Stop process
12/07/14 12:39:17 Start process
[Sat Jul 14 12:39:17 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/18 18:06:11 Stop process
12/07/18 18:07:13 Start process
[Wed Jul 18 18:07:13 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/25 10:58:29 Stop process
12/07/25 10:59:31 Start process
[Wed Jul 25 10:59:32 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/25 11:03:02 Stop process
12/07/25 11:04:04 Start process
[Wed Jul 25 11:04:05 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/25 11:06:55 Stop process
12/07/25 11:07:57 Start process
[Wed Jul 25 11:07:57 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
Similar stop/start messages in D:\app\Oracle\opmn\logs\ipm.log
12/07/25 10:58:27 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
12/07/25 10:58:29 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
12/07/25 10:59:29 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
12/07/25 10:59:29 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
12/07/25 10:59:31 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
12/07/25 10:59:32 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:01:21 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
12/07/25 11:02:11 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
12/07/25 11:03:01 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
12/07/25 11:03:01 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:03:02 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:04:02 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:04:02 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:04:04 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
12/07/25 11:04:04 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:05:14 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
12/07/25 11:06:04 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
12/07/25 11:06:54 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
12/07/25 11:06:54 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:06:54 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:07:54 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:07:54 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:07:56 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
12/07/25 11:07:57 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:4644)

Hi ,
It seems there is a clash of resources.There are rogue httpd processes left whenever OHS starts/restarts.File httpd.pid contains root httpd process and with the help of scoreboard file its communicated to child httpd processes.
1.check OPMN LOGS.
2.shutdown all process (OPMN infact)
3.pkill or kill -9 httpd
4.go to $ORACLE_HOME/opmn/logs/states and delete all files.
5.check no other HTTP server ports are being used by other processes.(restarting the server is better idea !).
6.CHECK ons.conf IF ANY ENTRIES ARE MISSING / MODIFIED - V IMP
6.Start OPMN and HTTP Server.
Edited by: anandk on Jul 25, 2012 10:17 AM
Edited by: anandk on Jul 25, 2012 10:19 AM
Edited by: anandk on Jul 25, 2012 10:20 AM

Media core CS6 has stopped working

I get an error message upon starting up my computer: Adobe media core CS6 has stopped working. What does that mean?Premiere Element 11
Message was edited by: Danielle Jaworowski Can someone answer me?

More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

DVD Start/Stop and Subclips

Question: In my browser I have double clicked a clip, it opens in the viewer, I then go to >View>DVD start/stop and the markers are inserted. Once I go back to the browser and highlight the markers and go to Modify>make subclips, FCP will only convert about 27 or 28 of the markers to subclips, when there is actually over 100 markers. Is there a maxium limit on the number of markers that can be converted or that will appear in the browser list? Hope I am clear.
G5-1.8GHz-2GB DDR SDRAM- 250 ATA HD just upgraded to FCP 5.1
Thanks,
Mary
Power Mac G5 Mac OS X (10.4.8)

I've done it both ways, not sure which is easier.
HDV capture creates individual clips (individual media files) based on the detected start/stop and uses a name you specify at the initiation of the capture appending a sequence number to the end of the name for each new clip. S/S detect always uses the name "Segment". Like the Segment clips, HDV clips are in natural order, as you say. I'm guessing that the file system is smart enough to consider the entire number at the end of a name, but sorts character by charcter if the number is in the middle of the name.
Just seems a little short sighted to use different naming conventions for essentially the same function, especially when it causes the files to be out of order.

Accidently moved dv start/stop marker

hello people...so I have a clip in the editor which I used the dv start/stop tool on. I want to go through the clip and use the media manager to take out any unwanted footage. here's the issue. the clip shows all the red markings for when I stopped recording and started. If I accidently moved any of those...is that a problem as far as timecode and capturing later? thanks!

I have a sequence with footage from 3 different clips in it. I decided not to use one of the clips....so I thought when I used the media manager, it would erase the one clip I am not using in the sequence....but for some reason, the manager shows me that after I selected the timeline....the original file is the exact same size as the modified.....why is this?

What effects when the scripts in INST_TOP were START / STOP

What effects when the scripts in INST_TOP were START / STOP
adalnctl.sh adforms-c4wsctl.sh adopmnctl.sh gsmstart.sh msc
adapcctl.sh adformsctl.sh adpreclone.pl ieo mwactl.sh
adautocfg.sh adformsrvctl.sh adstpall.sh javacache.log mwactlwrpr.sh
adcmctl.sh adoacorectl.sh adstrtal.sh java.sh sqlnet.log
adexecsql.pl adoafmctl.sh cm.sql jtffmctl.sh synonym.txt
When we will connect through front end (URL), how will we know that which service is not working and what is the main problem and how to solve that.

Please post the details of the application release, database version and OS.
What is the status of the services? Please issue "adopmnctl.sh status" and post the output here.
What is the reason, when we tried to connect through front end but its showing white screen and not connect? How to rectify it?Compile JSP files manually -- Blank Page Accessing R12 - 'Missing class: _RF' in OACore application.log [ID 467562.1]
What is the reason, when we entered our Username and Password on first screen, but after that its not connected to our apps? How to rectify it?What is the error? Any errors in Apache log files?
What is the reason, when it shows HTTP Error 500 Internal Server error. How to rectify it?Again, check Apache log files for details about the error.
Please run AutoConfig and make sure it completes successfully.
Also, make sure no errors are reported in the database log file.
R12: Troubleshooting 500 Internal Server Error in Oracle E-Business suite [ID 813523.1]
Thanks,
Hussein

[systemd] rc.d-style output when starting/stopping daemons

Hi everyone,
since polkit is deprecated by Arch Linux and many packages depends on systemd-logind instead, I have to switch to systemd. But I really miss rc.d-style output! Just like this:
# rc.d restart foobar
:: Stopping foobar... [ DONE ]
:: Starting foobar... [ DONE ]
netcfg also uses this "Arch style":
# netcfg -r foobar
:: foobar down [ DONE ]
:: foobar up [ DONE ]
Removing 'quiet' from kernel parameters will output simliar messages on boot. But when I log into X and run 'sudo systemctl restart foobar.service' or other commands in a Terminal Emulator, I cannot see any output. Neither the pretty 'Arch style' output nor normal 'ugly' black-and-white outputs.
I tried to modify /etc/systemd/system.conf, making:
DefaultStandardOutput=journal+console
DefaultStandardError=inherit+console
..., and reboot the system. But I still cannot get output when running 'sudo systemctl restart foobar.service'.
Can anyone help me getting back rc.d-style / Arch style output when starting/stopping daemons with systemctl? I really miss them!
BTW, I've tried 'sudo systemctl restart' with dnsmasq.service, httpd.service, mysqld.service, etc. None of them outputs...
Thanks in advance.
Last edited by wzyboy (2012-11-06 09:47:23)

I think it only outputs a message on failure.
Or you could try:
https://bbs.archlinux.org/viewtopic.php?pid=1180297
Last edited by loafer (2012-11-06 09:12:38)

LANC Remote for Canon C100 Rec. start/stop

Hi,I am looking for a 2.5mm LANC Remote to trigger Rec. start-stop on my C100 (one push AF would be awesome, if supported). I want to attach it to the tripod handle. I can't find any information about it and Canon support says they don't know about 3rd party compatibility. Can someone help and let me know which remote is supported? Or is it possible to DIY such a device? Best regardsJan

I know this option will work:http://www.bhphotovideo.com/c/product/816005-REG/Manfrotto_MVR901ECLA_RC_Clamp_LANC_Remote.html Manfrotto/Vitec posted a compatibility list for their LANC products here:http://mediacdn.shopatron.com/media/mfg/2747/media_document/live_2/Camcorder_Compatibility_Chart_v11_12.pdf?1354148977

Media Widget missing Start/Stop Sliders

Similar Messages

Maybe you are looking for