Media won't load inside project, always says Media Pending

For some reason when I open a project, even though I let it load all files through the progress bar in bottom right, almost always when I edit for a while and then go into the media bins and look at a file I didn't immediatly look at it says media pending and shows the yellow box.  It does this even though there is NO progress bar.   However if i quite premiere pro and reopen it and go straight to the same files they are always ready/there/loaded.  help?

  FAQ: What information should I provide when asking a question on this forum?

Similar Messages

  • I´ve got a iPod touch 3G and it won´t load ios5!it says no newer uploads availebale.any answeres?

    i´ve got a iPod touch 3G and it won´t load ios5!it says no newer uploads availebale.any answeres?

    It sounds like you actually have a 2G iPod touch which can only go as high as iOS 4.2.1.  See this article to help you identify what model and generation your iPod Touch is.
    http://support.apple.com/kb/ht1353
    B-rock

  • IDVD won't load large project file..Help!

    iDVD won't load large project file once I close the program for the first time since finishing the project.  Basically, I made a compilation DVD of numerous individual files spread across quite a few folders/sub-menus totaling about 236 minutes on a Dual Layer DVD+R.  I closed the project prior to burning but now, iDVD gets the rainbow wheel everytime you try to load that particular project.  What's the deal?
    Notes:
    -iDVD does still load if I want to load another (smaller/simple project) or start a new one.
    -I've tried to start over from scratch a make the exact same project.  When I exited out and went to load it, it did the same thing.
    -I'm running Mac OSX 10.6.8 Snow Leopard and iDVD 7.1.2.
    Any suggestions?

    Premiere Elements is not part of the Cloud... and it has a different forum
    http://forums.adobe.com/community/premiere_elements?view=discussions
    When you go to the correct forum, you need to provide a LOT more information
    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
    •Which version of Quicktime do you have installed?

  • I cant get my photoshop to load completely, it always says a patch failed to load

    I cant get my photoshop to load completely, it always says a patch failed to load...I unistall and try again and same error.

    Hi wilsonBright,
    Which OS are you using? Please specify the exact error message?
    Regards,
    Romit Sinha

  • Won't load new project or anything

    I have Adobe Premiere Elements 8 and it works just fine on my desktop.  I've installed it on my laptop now and it doesn't seem to be working.  When I try to create a new project, nothing appears. When I try to load a  previous project it says "Projects created with Adobe Premiere Pro and  Adobe Premiere Elements are not compatible." (I only have ever used  Premiere elements & mind you, these "previous projects" contain  nothing, because they're just the failed attempts at creating new  projects but with nothing actually happening after I get passed the  point of naming the new project)
    Any ideas on how I can fix this?
    The suggestions I've found through searching & such haven't helped.
    I tried deleting all previous files,  uninstalling, reinstalling, just letting it sit and see if something  eventually happens, deleted the adobe premiere prefs file, etc...
    Here are my specs:
    Manufacturer: Hewlett-Packard
    Model: HP Pavilion dv6 Notebook PC
    Processor: AMD Phenom(tm) II N830 Triple-Core Processor 2.10 GHz
    Installed memory (RAM): 4.00 GB (3.74 GB usable)
    System type: 64-bit Operating System
    Windows 7
    I was actually able to get it to load a new project ONCE-- but then I exited it because I needed it to be widescreen instead of standard. With the exception of that one time, I haven't had any luck getting it to do anything.

    Is it only your desktop it has been previously installed on? I ask because I think you can only install it on a maximum of two machines. If so you may have a licensing issue requiring you to deactivate one.
    More likely though it is out-of-date drivers and/or the state of your laptop. The following basics are well proven to solve many, many problems with PRE:
    Install all Windows Updates.
    Install latest version of Apple QuickTime (v7.6.9 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
    Install most recent graphics and sound drivers from the manufacturers web sites.
    Install PRE8 v8.0.1 update. Did the patch install successfully?
    Run Disk Cleanup.
    Run Defragmenter.
    Reboot your PC.
    Temporarily disable any anti-virus realtime scanning.
    And post back here with the necessary information about your laptop described here: Got a Problem? How to Get Started
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Premiere Pro CC won't load my project

    However I am able to load the project on another computer running Premiere Pro CC. At my home computer the program launches, and I select the project I want, but the assets and sequences don't load into the Premiere windows. However if I open another project (that I have only worked on using my home computer) I have no problems loading the project.

    Hi, I am having this exact issue. In my case, both versions of PPro are exactly the same, base version installed from Creative Cloud client with no plugins used.
    Project opens with no issues on one pc and wont open on the pc it was originally created on. It does not crash or say 'not responding' but assets and sequences wont load
    as Kristine describes. I have tried creating a new project and importing the old one; the assets appear but the program seems to freeze up as I cant interact with anything and
    hear the windows ping noise with every click. The project is very simple; a low bitrate .mp4 video with .mp3 and .wav sound effects added.

  • Final Cut Pro won't load my project.

    I have an external hard drive that I keep all my projects on and today I tried to load a project, but it won't load,
    I have attached a screenshot below, it has been stuck like this for the last 4 hours.

    Just to add a to Al's advice, working within the FCP X UI, try to copy one of the events (not the troublesome one) to the new library.  Let us know how you make out.
    Russ

  • Suddenly my PE7 won't load a project - any project.  Why?

    I've been using PE7 for two years.  This morning I left the project on which I was working on the desktop while I ran some errands with my wife.  Upon return several hours later the project was no longer on the desktop, and when I tried to load it, it would not load.  Instead, it put a minimized logo onto the task bar ( that bar at the bottom) and when I put my cursor on that logo, I see a single frame of the project I wanted to load.  Then if I try to load another project, I can see a frame of that project.  Can anybody help?

    Welcome to the forum.
    Am I correct that you have been Saving the Project (the PREL file) to the Desktop? That is not a good idea, as the Desktop folder has certain attributes, that are unlike other common folders.
    The ideal location is in a folder (I use the Project's name for my Project's root folder) on a separate physical HDD, than the OS and programs. If one only has one physical HDD, then there are fewer choices, but I would still use a regular folder, with the Project's name.
    When you navigate to the Desktop folder in Windows Explorer, do you see a file, with the Project's name, and the extension, /PREL? Note: depending on how you have your OS's Folder Options and File Display options set, you might not see the file's extension. I always set that Display to Show File Extensions, and also to Show System and Hidden Files, so that I can see everything.
    If you DO have that Project's .PREL file, I would Copy it to a new folder, with the Project's name in that folder's name.
    Now, can you launch PrE at all? If you can, at the Welcome Screen, choose Open Project (you will not want to try from the Project list), and then navigate to where you Copied that Project's .PREL file. Does that work?
    If you cannot launch PrE, then see this ARTICLE, which starts with a checklist of things to do, to get PrE to run, and run well. Note that some of the first tips are to upgrade the video and audio drivers, from the mfgr's. Web site. Do not trust Windows, or any utility to tell you, if you have the latest version - check on the mfgr's. Web site, or the mfgr. of your computer, if it's Dell, HP, Lenovo, Gateway, etc.
    Good luck, and please let us know how thing go.
    Hunt

  • After Effects won't load a project previously saved and working okay

    I am using CS5 10.0.2 on Windows 7 and have a project which I've been working on for a while. All okay so far.
    Today, I have added some media (Royalty Free video files) and it worked / saved okay. However, when I try to re-open it, AE hangs.
    I rename the folder with the new media in it and AE opens (and of course it tells me some files are missing). I try to replace the footage with the video in the new (renamed location) and boom, the programme hangs again.
    I have used AE for 5 or 6 years and never seen anything like this.
    Any ideas?

    I went to that GSpot site, and frankly, I don't trust it.  I think it might have mucked up your OS.  I'd uninstall it.
    Which brings me to another toxic-to-AE item you may have installed: the K-Lite codec pack.  If you did, you're not going to like the rest of this:
    K-Lite has always given AE fits: AE works fine one day, crashes the next.  But because K-Lite weasels its way into all sorts of nooks & crannies of the OS, you can't just uninstall it.  That's not good enough.  You won't get rid of it totally.  You have to to a total operating system reinstall.  It's not for the faint of heart, but that's what has to be done if you inadvertantly installed this evil-acting piece of software.
    Obviously you'll want to plan out the procedure before you take any steps like this.

  • Please please help! iMovie 09 won't load my project

    Hi,
    I've been slowly working on a project from a holiday we took early 2009 (yep, I mean slowly). I was actually getting close to having the movie finished and ready for export but now iMovie won't even show the project and this is a long project
    The files all run from my external drive. I have checked the folder and the iMovie Project folder shows the holiday .rcproject file as being there and I have looked at the other project files in the folder and they all seem to match up to this particular file (in regards to the when I ask it to show package contents, the same folders are in each one).
    When I double click on the file it opens iMovie but the project still doesn't show up! The raw vision from the project is there but it has red lines in all the clips too.
    I hope someone can help.
    Debbie
    Oh and the last time I opened the project was about a month ago and nothing untoward has happened in the meantime. In that time we made another movie of a friend's wedding and everything was fine.

    Hello, i have also had the same issue. Basically when i click on the photo icon in imovie 09 the library doesn't show,it's just blank but also my itunes library isn't showing up either. The only way i can get photos and music into imovie is by dragging them into imovie but thats not the way the program is meant to work and would also like to fix this issue. Any help would be greatly appreciated.

  • Add on manager won't load in FF11 - simply says "Loading" for hours

    Using FF11 on Win 7, the add on manager simply says loading forever. I'm unable to access my own addons to activate / deactivate them as appropriateI've tried:
    1) Clicking on Extensions, Plugins, Appearance then going back to Add on
    2) Starting in safe mode and resetting user preferences
    3) The addon site is up and working and I can add new addons by accessing the address directly from my browser
    4) Uninstalling and reinstalling firefox
    Any suggestions greatly appreciated. I see this was a problem on FF6 but I haven't seen people having trouble with FF11
    Thanks

    I have a fair few installed but have deactivated them all since this started in the hope that it was a conflict of some kind. The extensions tab is just blank though there should be some extensions there. Just for fun I let it try to connect to the Addon page and after 2 hours - still nothing -- sighhhh
    Thanks for your thoughts

  • Pages won't load colmpletely although page says loading is 'done'

    When loading a page or link the page says it's 'done' loading but the loading bar is still not complete and the page can not be clicked on. I cannot reload the page as I can't click on any of the buttons and so I have to close the window completely and re do it this happens many times before I get it to load completely and work properly.
    == This happened ==
    A few times a week
    == recently updated firefox

    Try clearing your recent history, cache and cookies.. It worked for me.

  • My Ipad and computer are syncd, apps won't load on Apple tv, says "no content was fund in this library".  How do I get my apps on to Aple TV?

    Hi Folks.... 
    Please help...
    All the Home Sharing is turned on...
    My Ipad apps are synced to the Itunes Computer
    I can get everything else on Apple TV but not my apps under the caption "computers"  says no content in this library
    Thanks in Advance
    NorthTrapper

    You cannot add apps to Apple TV.

  • Report Application Server won't start. CCM always says Starting....

    I am complete newbie to doing admin for Crystal Servers, forgive the question:
    (Win Server 2003 r 2 / CR XI)
    Report Application Server won't start which is preventing other servers from starting in CCM.
    Reboot machine several times and still having the issue.
    Get an error msg in Windows before login window appears stating that the crystalras.exe application requested a runtime to terminiate in an unusual way (.Net error).
    I get the following error msg in my event viewer.
    From Event Viewer:
    Event Type: Error
    Event Source: BusinessObjects_crystalras
    Event Category: Startup
    Event ID: 33000
    Date: 7/27/2010
    Time: 4:24:34 PM
    User: N/A
    Computer: CRYSTAL
    Description:
    Failed to start the Report Application Server.
    From Logging:
    Timestamp ProcessID ThreadID Message
    Tue Jul 27 20:24:34 2010 2496 3176 assert failure: (.\sso_wrapper.cpp:94). (SFileSys::exists(ssPath) && SFileSys::isDir(ssPath) : Platform binaries directory not valid.).
    We installed some Windows Server Updates about 3 months ago (at the time, over 70 Windows updates were installed) but, this problem hasn't shown up until 2 or 3 weeks ago. I think a .Net Service Pack might have been part of the updates at that time. When we did the updates, Windows was shutdown and updates installed per the preferred option of Windows. But now when rebooting since that time, the server continually reccomends the install updates and shutdown option. Do we need to rollback the server to date prior those updates if possible?
    I have also uninstalled .Net Framework back to 2.0. Is 1.0 or 1.1 the max that will work with XI?
    Should I also try to uninstall all other Windows updates?
    Thanks in advance for any help, Ed

    Post this query to the [Business Objects Enterprise Administration|BI Platform; forum.

  • Firefox won't load any pages only says connecting.

    It just doesn't work. No firewall blocking is being done, other browsers work.

    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
    Check the connection settings.
    *Tools > Options > Advanced : Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if the "Use the system proxy settings" setting or one of the others doesn't work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Maybe you are looking for