MediaFork and home movie quality
I've been converting all my DVD's over to TV using Mediafork with good results, but using the same set up with my home movies which are on DVD produces poor results, any ideas why this would be. My movies were taken with a quality digital video camera.
Maybe because your home movies are interlaced, and your bought movies aren't.
You can deinterlace your home movies in MediaFork/HandBrake, since neither the iPod or Apple TV support interlaced video. However, deinterlacing effectively halves the framerate of your video, and gives it a slightly blurred look. So don't be suprised if your home movies look a bit worse on the iPod or Apple TV compared to on your original interlaced DVD.
Similar Messages
-
I have a cinema sound receiver connected to Apple TV via optical cable. When I have dolby digital set to Auto it doesn't come through as dolby digital when watching movies on netflix and iTunes (home movies).
If I set Dolby Digital to ON it works as expected, but the sound stops working through normal TV speakers (via HDMI). This is the same for netflix and home movies.
I tried 16 bit setting, but it made no difference.
Any advice on how I can get this working - meaning Dolby Digital always on for when I turn my surround sound on and sound through speakers for normal operation?
Obviously I can change the setting when needed, its just a pain.
Thanks in advance.Hello everyone,
here is the friendly and signed driver installation method to enable Dolby Digital Plus in your Encore internal speakers only. This is not an official driver, there is no control panel for Dolby Digital Plus or various sound effects, but tested and has much better and richer surround sound quality as before with factory driver. I guess, this driver tweak can work with any Bay Trail tablet also.
How can you upgrade Encore sound drivers:
1. Download signed driver package and extract.
2. Open Device Manager.
3. Upgrade your Sound, Video and game controllers
- Intel SST Audio Device
- Realtek I2S Audio Codec
one by one with "Have a disk" method.
4. Double click enabledolby.reg file and add to your registry.
5. Restart, and enjoy better sound quality.
Thanks.
UPDATE: Official Toshiba Dolby Digital leaked, official driver attached: ToshibaDolby.zip
- Encore with WimBoot -
Attachments:
EncoreDolby.zip 310 KB
ToshibaDolby.zip 1310 KB -
What's the best way to make a DVD that has a slideshow and home movies?
Is is better to make a slideshow on iphoto, then transfer it somehow to imovie, then add my home movies? I'm new to Mac, so I don't want to get too into this project without advice. Is there a way to make a slideshow in imovie and then add my movies?
There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089 -
I have an imac and macbook, I have created and edited home movie video on both and uploaded to itunes on the same ID but the video on one computer won't show up on the other when itunes is opened. Why is this?
Hey Jonsey912,
Thanks for the question. If you have home movies that you would like to have on your iPad, you can sync them to your iPad with iTunes:
iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/ht2729
Sync your iPhone, iPad and iPod with iTunes using USB
http://support.apple.com/kb/ht1386
Your other iTunes movies show up on your device because they are purchases from the iTunes Store (they can be downloaded). Because a home movie is different, you’ll need to sync it or use Home Sharing to view it on your device.
Thanks,
Matt M. -
IMac or Mac Pro for iPhoto albums and home movie editing?
I have a Mac Pro OS X 10.6.8 with iPhoto 7.1.5. This system is now obsolete for ordering iPhoto albums. I need to upgrade to iPhoto 9.5.1 to buy a Mac produced photo album. To upgrade iPhoto I need to buy a new Mac as my 2004 Mac Pro with 2008 Snow Leopard can't be upgraded. I will use the new Mac for email, web surfing, iPhoto, and weekend video editing. I use Final Cut Express on my current Mac Pro. I will also need to transfer videos and about 20,000 photos from my current Mac to a new one.
So, here's the question: For my needs (listed above) which is better,
(1) iMac 27" or (2) new Mac Pro? Then, with the one chosen, how should it be configured to do my basic video editing? I have 100 hours of family video on Hi8 and VCR tapes and will edit these on Final Cut and burn them to DVD's. (I understand both iMac or Mac Pro now require an external DVD set-up.) So, which computer and how should it be configured. Looking to pay between $2500-$3500. Thanks for your help!What video formats are you talking about? DV, HDV, etc?
Mac Pro is a better solution, regardless. Here's why: Simply upgrading an iMac HD is not enough. You do not want to capture your video to the boot drive. It's too much to ask the drive to manage the OS, your editing software, AND your media. This scenario might work - but is certainly prone to dropping frames. Ideally, you want one drive for OS + editing software & a separate drive to capture media to.
Now, since you can only have a single HD in the iMac, you're demoted to using external capture drives. So let's say you get yourself a FW800 drive for capture and then hook up your camera/deck to an available FW400 port. You'd think you're safe - and again, you may be. But the problem now is that the iMac has ONE and only ONE FireWire bus. So in theory these 2 devices: HD & Camera are battling for the same bandwidth. So you've still got a bottleneck happening.
So DV only would probably work. But it may have issues that the expandability of the Mac Pro can conquer. Hope this helps. -
I had my old 8mm home movies transferred to dvd's, they have a .bup extension, is it possible to download them into itunes and play them on my ipad2
Yes. Is the short answer.
You can directly connect the speaker out port of the Mac mini to an input on the AV Receiver which then feeds your speakers. This would be an audio only solution. If you use a TOS-Link connection this will be a pure digital connection ensuring the best quality (important for audiophiles).
You can if you wish connect the video from the Mac mini to the AV Receiver, and if you have a Mac mini with HDMI or a Mini Displayport you can run the audio and video via a single cable. (Older models would use two cables, the aforementioned TOS-Link pus a DVI to HDMI cable.)
If you do connect the video output from the Mac to the AV Receiver you can then display this on your TV, and have as one possibility iTunes displayed with perhaps one of the iTunes visualisers playing along with the music. Another possibility would be to use FrontRow on the Mac.
A different approach would be to have the Mac mini stream over a network to a device e.g. the Sonos Zoneplayer which is then connected to the AV Receiver. An AirPort Express is also able to do this. -
I built my own computer which has 4 internal hard drives with 3 internal hard drives that are 3tb. With my movies and tv shows, I need to know if I can move the Itunes folders (Movies, TV shows and Home Video's) and move each one of them to 3 seperate internal hard drives while Itunes can still find them to play with my apple tv. Does anyone know how I can do it?
While you can do that, it is not a feature of iTunes. Put your movies on the external drive, then add them to iTunes by dragging the files to iTunes while holding the option (alt) key down so it leaves the files where they are located. There are other ways to move them if they are already added but they can be more involved and tricky. If it's just one or two try: http://dougscripts.com/itunes/scripts/ss.php?sp=relocateselected
-
Can Apple TV 2 stream purchased videos / home movies converted to MP4 and in my iTunes library?
Okay, so we currently own a 1st Gen ATV and love it, however 99% of it's use is streaming purchased content and/or home movies etc. that I've used visualhub/handbrake to convert and imported into my iTunes library. All in all, once I gave up and surrendered my video content to iTunes and started streaming to my 1st Gen ATV I've grown hooked, I love sorting stuff however I want (I have about 250 movies, entire seasons of X-Files etc. that I've ripped from my own (LEGAL) media and put in iTunes, so when it's sorted properly it's very clean, when it's all alpha, it's a nightmare.
I've tried a few media servers for the PS3, however they just pile all the movies into one big alpha sorted mess, music isn't sorted by genre, no genius, TV shows are not tagged by watched, won't resume properly etc. Boxee / XBMC are a little better, but then again I run those on my ATV as well, and still Boxee doesn't really seem to sort stuff quite as well or play playlists properly.
We're getting another TV for our den and have been looking into other media streaming options, what I love about the Apple TV is the way I can sort all our movies, shows etc. by genre, so the kids can just go to the stuff I've tagged as Kids Movies or I can make video playlists for them and mix up some Planet Earth and Dora the Explorer for our babysitter and movies /shows are tagged as watched/unwatched, if you stop one it will ask if you want to resume, etc.
Looking into the ATV2 it seems like it's just geared for rentals, If that's the case I really am not interested. I like the Netflix option, but then again most newer internet connected TVs do that as well as my PS3, not sure how viable an option the WD TV Live plus or Boxee box is, I'd like to get some newer hardware, but I'm just not sure what route to go.
Does the ATV2 stream media in iTunes TV Shows/Podcasts/Movies folders? It doesn't sync right? So it it all Airplay now?
Is my best bet just to get another 1st Gen? Are there any other media servers that are able to sort stuff by played/genre/etc.
Ug, I'm at a loss! I really love the features of my old Apple TV, and would love to get a new one, but I'm just not sure if it will do everything I'm used to, or if any of the other standalone boxes are better options?
I know this is a bit of a ramble, hopefully someone can make enough sense out of where I'm going and help me out! Thanks!Welcome to the Apple Community.
The Apple TV 2 will play all the content in your iTunes library that your Apple TV 1 does. It can no longer sync any of it but can stream it all just as the older model did. Airplay is a different feature that lets you stream from an iPad/iPhone, the Apple TV 2 has Airplay the first didn't.
You can still sort and search content by genre, it still marks content watched and unwatched and mainly still lets you organise much as the Apple TV 1 did, with one exception. It doesn't do nested folders, so the ability to tag a movie as a show (ie James Bond) and have all the associated movies in a James bond folder has gone and it lists all these movies individually.
It has a similar situation with TV shows. It will put all TV shows in a series in a folder as the older one did, but the new one lists each series separately whereas the older model would put all the series in one folder.
Not nesting folders is a bit of a pain with large libraries and whilst I don't like it, it's more or less the only compromise I have to make and of course I get additional features too. -
What's the best workflow for Home Movie Importing and Enjoying?
I'm new to iMovie (and the mac) and have started importing all my home movies from my camcorder into iMovie. I quickly realized that movies take a huge amount of disk space and it may or may not be reasonable to import all my movies and keep them on the hard disk in .dv format. At 12GB/Hour I would need 1.2 Terabytes of storage (plus backup). If that is the best workflow, i'm happy to invest in a few terabytes of storage and back up. But before I do that, I want to check to see if there is a different workflow I should follow given my use case.
Here is my use case:
I have 100 hours of 8mm and miniDV tapes already and plan to continue creating more.
I want to import them all into the iMac for ease of organization, searching for the clips of interest, and watch them either on my iMAC and also on my TV (via TIVO).
I may do some editing, but this is not a big priority for me at this time. I may do more editing in the distant future when I have more time. My editing for now will be limited to rejecting portions of clips I don't want.
I plan to watch the movies from my iMac on my TV via my TIVO (i've already ordered the Roxio Toast software that I understand I need, per the Tivo web site).
The final piece of my use case is back-up. I'd prefer to back up my movies on disk this way I maintain any editing i've done in case of a disk failure. Depending on what video format is recommended, this may bump me into a RAID multi-terabyte system as both working and automatic backup?
Here are my questions:
Should I maintain my event library in .dv format? (and bite the bullet on the storage)
Or is the .dv format intended only for temporary editing and users are expected to compress into another format after editing? if so, what format and which tool is recommended? (keeping in mind that I want to view the clips via Tivo and Roxio/Toast).
If I need to byte the bullet and invest in storage, my quick math suggests I'll need about 2 terabytes for the library and 2 more for back up for a total of 4 terabytes!?. Is a RAID system recommended for this? (I was surprised that the Apple store did not carry such a system, so perhaps that is not the best option). What would you recommend?
Anyone out there with a similar use case? I know I've asked a lot of questions here. I'd appreciate any recommendations you may have, even if you cant answer all of them.
Thank you.I am in a similar mode, though about half as much existing DV footage.
+Should I maintain my event library in .dv format? (and bite the bullet on the storage)+
Short answer, yes; long answer:
I did "bite the bullet" since 1T drives are at or just over $100. I'm using a MacBook Pro so I bought an 2 port eSATA card for my cardbus slot ($34), and a 1T eSATA/Firewire/USB drive ($119). I don't plan to "back up" as I am not going to get rid of my Mini DV tapes/vhs/analog tapes, etc. Those will be in an off-site dark cool closet elsewhere. I don't want to do RAID or such as it still puts everything in the same drive unit, in the same location. Basically I'm splitting my video import to two different physical drives. So if lightning, thieves, personal incompetence or whatever strikes, there's more chance it'll only affect one of the drives. I've thought about a Drobo, which you might consider. It is unique device that offers a spin on RAID that offers some advantages.
Everything I read here on these boards suggests that it is best to grab the source video in the original format whenever possible. Since storage is cheap, makes sense to me.
It is likely you wouldn't compress your video unless you were going to edit it. For example if you wanted to make a video of the kids growing up to give the relatives you'd likely end up compressing to burn them a dvd. You would compress if you were going to use MobileMe, YouTube, etc. to post some footage. Whether you watch the video from home, or output to DVD for others, or post online, at least you'll have the source video in it's best possible original format to work with.
This is an aside, but might be useful, I imported one tape at a time, let iM09 create a new event and split per each day. THen I renamed every event based on what the content was before doing the next tape. This really helps later on once yo realize you have a hard drive with 50 hours + of everything in your life on it. I included the year in the name in some way, for example, John's wedding 1994, Hawaii 2000, Hawaii 2004. Then I ended up drag/dropping Hawaii to one event. -
I have several movies and home videos stored in itunes, when viewing these on appletv, it mixes all the movies and home videos together.
I would like to beable to select either Movies or Home Videos when viewing on the Apple TV if this is possible...?You have 2 options:
1. Create Video Playlists in iTunes (for example create one for Home movies, the other for Movies)
You COULD make these Smart Playlists. (see below for one technique)
NOTE: If you wish to do this don't miss the preference in Settings to enable Video Playlists at least (at least in the latest ATV updates) I believe it's under Audio setting. Amazingly the default is NOT to show!! (had me going for quite a bit)
2. Set up your Home Movies as "Music Videos" This has some gotchas: like you'll probably want to choose the skip when shuffiling, also Now they'll appear in music lists. The only advantage to this is that it makes playlists more available on iOS devices since there are no Playlists displayed in the Videos App.... (yeah Apple's made this WAY confusing of late)
If you wish to keep these clearly defined (especially for use with Smart Playlists.
Select the movie
Get Info (Edit Menu) (or Command-I Mac, Control-I, PC)
Choose the "Video" Tab - you can select your desired type from the Media Kind pop up.
Alternate method for setting up smart playlist of home movies would be to set the Genre to "Home Movie"
Probably more than you needed to know - leigh -
How to play home movies on TV via Iphone and NAS Drive?
I have a problem playing transferred home movies on a flat screen tv through the “TV Out” feature of my Iphone 4.
Brief History:
I have captured about a TB worth of various home movie videos from VHS tape to my PC hard drive in AVI format using AVS Video Recorder. I used AVS Video Converter to convert the AVI movie files to M4V files, to play these movies on my IPhone. I then copied these M4V video files to a Western Digital “My Book Live” NAS Drive which allows me to view any video using my Iphone, via a WD app, without using Iphone internal memory. This works so far.
The problem is that I thought I could show these videos to family members through their big screen TV at their house, and by hooking my Iphone to their tv’s audio/video inputs, via cables, using TV Out and access the videos from my NAS Drive as I could when using the Iphone alone. However, the home movies do not play on the TV! After a conversation with Apple Techs I was told that using the Iphone’s “TV Out” feature to view video onto a TV, via the Iphone , only works for video that is stored on the internal memory of the Iphone itself, not for accessing 3rd party drives as my NAS.
I was told that there are ways around this like:
- Syncing certain videos to the Iphone (to save storage space) and viewing them on TV via “TV OUT”
- Getting an IPad (bigger screen then Iphone) and accessing the videos through the Apple Cloud
- Using Apple TV and accessing movies via the cloud (which means I would have to bring and hook-up Apple TV to the receiving TV). Not sure about this method.
- Something about Airplay and mirrioring???
So my question is: Is there any way to access my NAS drive (which has all videos stored) and play those videos on another household’s TV, for many people to comfortably view at once, via my Iphone? Or, is there another method?
Any advice would be appreciated.
Don S.Ge0ph wrote:
I have a playlist called shows that has a few TV shows, movies, and podcasts. I also have the latest versions of iTunies and Apple TV. The playlist doesn't show up anywhere on the Apple TV.
Where should it be?
the playlist option will show next to where "genre" is only if the playlist contains the appropriate content for the section that you are in.
for example i have a playlist that contains all episodes of a season of King Of Queens. the playlist shows in the "my tv shows" section, but does not in "my movies", as the playlist only contains tv shows.
might be an idea not to mix content in playlists, as you won't be able to play mixed content from a playlist anyway. -
My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?
What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder. -
Extreme poor quality in full screen preview and exported movie
I have spend evenings and evenings to create the content of a project.
After dealing with error -108 and extreme poor quality in full screen preview and in exported movies (extreme stuttering) I decided to install my iMac new again.
The error -108 disappeared, but the extreme stuttering still remained in full screen preview and in exported movies.
If I make the preview screen in the iMovie browser as big as possible there is nothing to see of any stuttering.
Now I am getting pretty annoyed and have no clue what to do anymore (how to solve this problem) .....
Anyone any suggestion ?
The orginal video was recorded with a Panasonic HD camcorder.
I do have a mid 2011 iMac with 16GB ram and 256GB SSD and 1TB HD with a complete clean installation
of OS X Lion and iLife. This configuration should be enough to create a proper movie :-(mantralightroom wrote:
why is it this option disabled? do the generate monitor sized previews increase a lot the cache a lot!
Potentially, yes. The standard Preview is 1024 pixels, longest size. Some people (like Omke) have displays 2560 pixels longest side, potentially increasing file size by over 500%. -
What's the difference between Home Movie and Movie Project?
I edit my movies in iMovie. After editing, I 'Share' them to Movie Projects in Finder. There's also an iMovie Home Movies folder that contains duplicates of some of the movies I've created myself. What's the difference between these folders. And, can I delete any of them? Thank you.
A Time Capsule is hardware. It's basically an Apple AirPort Extreme wireless router with a built-in hard drive. For more info on this product:
http://www.apple.com/timecapsule/
Time Machine is a software application that allows your Mac to backup its data automatically to the hard drive on the Time Capsule. For more info on this software, which is included with the Leopard, Snow Leopard and Lion operating systems:
http://www.apple.com/findouthow/mac/#timemachinebasics -
What's a good video app to use? I have iPhoto and iMovie, but it these wont let me do certain things, such as email a video. I also want to be able to make a dvd of my home movies. Any suggestions?
Unless you want a new computer, forget about AVCHD. It requires too much muscle to edit comfortably on anything but the fastest computer.
What camera is nice, depends on your budget. Formats that are easy to edit are HDV, DVCProHD (P2) and XDCAM. In the consumer range you could look at the Canon HV40 or XH-A1s, in the prosumer range look at the Panasonic AG-HPX170, Canon XH-H1s, JVC GY-ND250 or Sony HVR Z5 or Z7 and all Sony XDCAM cameras, especially the EX1 and EX3. In the professional range look at the Sony PDW-F355 or upward.
Maybe you are looking for
-
Cisco ASA 5505 site to site IPSec VPN with RV220W issue
I have a ASA5505 connected to RV220W through IPSec VPN. When using SMB to transfer large file, the ASA5505 will show error message: CTM ERROR: Invalid input parameters, ctm_get_scb_prot_stats:1561 The error message from the debug crypto engine. When
-
Hi Gurus, I have couple of questions here regarding Inventory extraction, and I will ask one by one: 1. I have a requirement to develop a report called " Stock Ledger Report " where the KPI's would be Quantity, Cost & Retail Price. The 2 KPI's Quanti
-
ipad 2 is locked up
-
Hi All, I need to display a summary table in ALV footer with multiple columns. I am using event end of list and table with line type slis_listheader but this has limited columns. Any ideas? Thanks and Best Regards, Tyken
-
When I open up firefox I get the alert: Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions a