MediaSense call flow/bandwidth

Hello,
I'm considering purchasing MediaSense. The goal is 100% call recording. Our environment is CUCM 10. Publisher, sub, and gateway are all located at HQ. Remote sites (which include 7900 series phones) are located across a WAN.
My question is about the call flow if we add MediaSense. According to the MediaSense SRND v10, it appears to launch a new RTP stream from the phone to the MediaSense server. That would appear to double our bandwidth to remote sites (one stream from gateway to phone, another stream from phone to mediasense).
Is that correct? Any other deployment options that wouldn't have that impact?
Thanks!

The last time I checked for internal recording that was the only way, and they only supported phones that can utilize built in bridge.
If you have SIP circuits, media forking on the CUBE can be easily configured for complete PSTN call recording.

Similar Messages

UCCE Call flow to load balance & redundancy

Dear NetPro gurus,
I have used Cisco UCCX for a number of years but I'm a newbie to UCCE.
1. For UCCE, can each site have multiple PGs, Routers, Loggers & ICMs (for instance, can i have 2 PGs on site A & 2 PGs on site B (a total of 4 x PGs)? Or each site can only have 1 PG, 1 Router / 1 Logger and 1 ICM?
2. Is there a way where i can say force all my Customer Services CSQ to go via Site A? And all my IT Helpdesk CSQ to go via Site B? But if either site failover, the traffic will automatically fialover to the other sites PG, Loggers / Routers, and ICMs?
Would greatly appreciated if anyone can shed some lights on this.
Cheers,
Hunt

Hi Lee,
answer to your first Q:
UCCE will be having one router, one logger in each sites for one UCCE instance.
with respect to PG, you can have 2 PG on each side. It will work as active stand by mode.
for second question, you can do this based on selecting routing client from different site. Please provide call flow and what will be the VRU (CVP or IPIVR)
hope above will give you some light on your query.
Regards,
Shalid K.C

Cvp call flow trace

i am trying to disable call flow trace on CVP call server 8.0.1. when i use the commande setcalltrace off on voice browser administration i got a message saying :
This command is now obsolete. CallFlow trace is now turned ON by default and can
not be turned OFF.
how can i disable call flow trace???

it's on all the time. can't be turned off. the document could be just confusing.

Packet Trace or Call Flow for IP Softphone

I have been searching around for a while not finding any packet trace or call flow document on the IP softphone. Is there anything like this available ?
Regards,
Mat

For Tracing the calls on IP softphone you can refer the following document. This document has the following section
Tracing the Cisco IP SoftPhone GUI Application - which explains how to setup
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/softphon/admin/ad_trbl.htm#1037447

DNIS configuration And Call flow configuration in Siebel

can we configure Call flow and DNIS is siebel ? also can we upload Prompt in Siebel CTI?

You can but not IVR stuff.

CUCM Call Flow

What are the things that will happen when IP phone-A calls IPphone-B?

Hi Jaime,
In another discussion, you have replied that the call flow information can be obtained from this link:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpaaph.html
But I am not able to acces it. Please explain it or mail the document to me: [email protected]
Thanks in advance
Fayiz

CRS call flow sample requires

Dear all,
I want to take some CRS 3.53 sample call flow. depend on the CSQ, I want to take report which is about the Skill level. But I cannot find this report in Historical report. So I want to find some call flow which can take this report.
Regards
Lawrence Ng

Try this link
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00801bf503.shtml

BCM call flow architecture with detailed description of all the components

Hi Experts,
Please provide me BCM call flow architecture and detailed description about all the component Eg. When a customer calls on xxxx number call hits to IVR and than as per customer DTMF routed to available agent. In that call what are the components that participate and what is there roles. Is there any architecture diagram that can explain all the functionality?

Hello Raman,
Start with SAP BCM 7.0 SP6 Basic Installation Example document, on Service Marketplace. That document shows voice routing paths and explains the main functions for every component. The component functions are also touched in Master Guide and Security Guide, also on Service Marketplace.
Kind Regards,
Tomi

Can anyone pls give step by step call flow of ICM pre-routing

dear all,can any of you give the ICM pre-route call flow step by step?

dear all,can any of you give the ICM pre-route call flow step by step?

Reconfig call flow (?) after upgrading to CCM4.1(3)

Hello everyone,
I upgrade CCM 3.3(5) to CCM4.1(3) without any errors. Yet the follow call flow seems not working.
How could I reconfig it in new CCM server? Thank you for your reply.
Outside callers call to hotline#
- Carrier translates it to local#
- CallManager translates it to 1500 and sends it to Unity
- Unity plays greeting of hotline call handler and transfers call to extension #1001
- If 1001 is busy or not answer, call is forwarded to 1002.
- If 1002 is busy or not answer, call is forwarded to 1003.
- If 1003 is busy or not answer, call is forwarded to voice mail of hotline
Howard

Hi Howard,
Hope things are well for you:) It seems like this should work regardless of the Unity version. What number/DN do you have setup up for the Voicemail box for the Hotline? It can't be 1500 because that is the Call Handler correct. You might want to do a test setup and make the last forward step a phone like a 7940 so that you can see what number is being presented to Unity in the final forward step (you may be able to use Unity Call Viewer, not sure about your older version).
It seems likely the problem is in the number being presented vs the number you have configured for the Hotline Mailbox.
Hope this helps!
Rob

Some doubts on UCCE CVP comprehansive call flow.

hi,
What is the configuration on CVP that forwards call to ICM.
as i am not able to find any configuration in OAMP or CVP that target to ICM.
the flow is as follows-
VG-CUSP-CVP-VRUPG-ICM-CCMPG-CUCM
Thanks and Regards-
PK

Hi,
There is no much configuration in CVP.
In CVP ,ICM subsystem configuration the PORT number you have mentioned is should be same as the PORT number mentioned in CVP PIM configuration.
and in PIM configuration you should mention the CVP host name.
Through this PORT CVP interact with VRU PG using GED-125 and VRU PG communicate with ICM (Router).

BlackBerry MVS call flow

I have some conecern regarding the call intiated from company CUCM throgh the blackberry devise (the first leg call). Is it a normal call throgh our service provider i.e. involve charges as any normal call?
Thanks,
Ali

Hi Ali
It depends on how your BB is connected.
If your BB is connected to your corporate WiFi and can register with the BES server over IP, then the call will be FOC. Same comment applies if your BB is connected over non corporate WiFi and is using some form of VPN.
If your BB is not connected to the corporate WiFi, then either CUCM will call the GSM number of the BB (PBX initiated) or BB handset will dial CUCM (device initiated). Either way, you will generally pay for this call leg.
HTH.
Barry Hesk
Intrinsic Network Solutions

UCCE Lab Call Flow not working CUCM- CVP- NAM-CICM

Call is coming up to NAM and from NAM call is not hitting on CICM. It is failling at ICM Gateway node in the Script. What could be the possible reason for this failure?
Please support.
I am getting below error in NAM-RTR logs
ra-rtr Trace: (33 x 0 : 0 0) NewCall: CID=(150921,110), DN=6666, ANI=10002, CED=, RCID=5002, MRDID=1, CallAtVRU=1, OpCode=0
08:58:08:544 ra-rtr Trace: (33 x 0 : 16777226 0) Sent NewCall to CIC, AppGWID=5000.
08:58:08:546 ra-rtr Trace: (33 x 0 : 16777226 0) Handling DialogFail from CICR, Reason=11.
08:58:08:546 ra-rtr Trace: (33 x 0 : 16777226 0) DialogFail: Reason=11 CallState=8.
08:58:08:546 ra-rtr Trace: (33 x 0 : 16777226 0) No default label available for dialed number CVP1_RC.6666 (ID 5001).
08:58:08:547 ra-rtr Trace: (33 x 0 : 16777226 0) Deleting Dialog.
Not sure what is this error about.

Can this help:
http://docwiki.cisco.com/wiki/RouterErrorCode%3D_66_-_No_default_label_available_for_dialed_number_%252_(ID_%251).
HTH,
Dragan

How to Trace the file changed in the IVR for an IPCC call flow.

We have an issue where :
Customer reported for one process out of office message was wrong.
We have uploaded the new message file and it started working fine.
We require help to check if any log to proof that the same process “Out Of Office” hour message file changed from our end
Urgent !! Please advice.

Hi
If you are on IPIVR or UCCX, then you can see in the MADM logs who has carried out what changes (c:\program files\wfavvid\logs\madm).
If you have users dialing in through an application to change prompts, or through some other custom method, you should really be logging changes as they are made...
Aaron
Please rate helpful posts..

Automatic Call flow to auto-attendent after office hours

Currently running CCM 4.1, I would like to automatically switch some of our service lines automatically to a announcement service stating we're close for the day during weekdays and on weekends, can it be done? Is there anything I should consider having to purchase?

Yes, using the Time of Day Routing feature. Check this link for more details.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_3/ccmsys/a03tod.htm
Regards,
Anup

MediaSense call flow/bandwidth

Similar Messages

Maybe you are looking for