Mediasource cannot see my files on a network dr

I have a SAN network dri've that I access wirelessly over my home network. I have set my My Dcuments to point to this dri've and have setup sychronising for offline use. My Music collection is also stored on My documents. The problem is that MediaSource cannot see any of my music. I have setup this folder as my PC Music Library and have setup sniffing on this folder. I am using MediaSource V5. Any ideas/suggestions pleaese?

I assume that the Capsule backed up only what was on my computer, not my wife's computer. She will have to back up her computer separately, correct?
Correct.
where do I go to see what is backed up so I can be sure it worked?
It is going to take Time Machine some time to index the new backup, so wait a day or so for this to occur.
Then, click on the Time Machine "clock" icon down on the dock at the bottom of the screen. A lot of data has to load, so if you are using a wireless connection, leave things alone for 5-10 minutes or so.
Once you have history of backups, you can use the time line on the right of the screen to select a data of a past backup to view how your Mac looked on that date. If you need to restore a file, navigate to the location, click to highlight the file, and then click Restore below the window
The following Apple support document will have tips for you:
Mac Basics: Time Machine backs up your Mac - Apple Support

Similar Messages

Satellite A660 - cannot see saved files

The problem is with a game that I have.
I can see a file that I downloaded from the net to play, but those files from the game that I have saved do not show up when I look for them they don't show up. But when I view compatibility files they show, but that does me no good since I cannot send them on to other who will need to use them. The game in question is Civilization 3 Conquests, but I have a PC with it on and did not have this problem.
So where can I find the setting to make them visible?

>... cannot see saved files
Is this general problem with your notebook or you have noticed this with game files only?
I mean it is not easy to say anything about this specific issue.
Im not gamer so I cannot comment some game files problem.
Try to find some gaming forum where people discuss about Civilization 3 Conquests and ask if someone else has noticed the same problem.

When browsing documente library contents from client application, cannot see all files

We are currently running SharePoint 2010 Enterprise in a small environment. On one of my sites, I have a document library with various documents uploaded (docx, xlsx, pdf). I am unable to see all the documents when browsing the library from Word/Excel/Adobe
Acrobat. For example:
- At the root level of the library, I have 5 folders
- In Folder 1, I have 10 PDF files
- If I go into Adobe Acrobat 11, for example, and paste the address of my site in, I can see the library and I can click on it and see the 5 folders. If I click on Folder 1, there are no PDFs listed. Even changing File Type to "All Files"
still returns 0 results
Things I have tested:
If I view the library in the browser, I can see the 10 PDFs in Folder 1. They are not checked out and they are visible to everyone
If I click Library>Open w/ Explorer, I can see all 10 PDFs in Folder 1
If I try using other client applications (Word, Excel, etc..), I cannot see any files in Folder 1, even when I change the File Type to "All Files"
If I click in some of the other Folders in the same library from within a client application, sometimes I can see the files but most times I cannot
What could be causing this? I do not see any errors in any of the event logs.

Hi Sephiroth,
I think my observation is when you browse from word/Excel/Adobe it is taking your local system credentials and so not showing files when you access.
local system account means the account which you used to login to the system.
For example,you logged into the system as contosomo\xyz and you are trying to connect to the site using Contosomo\setup account,what my point is though you logged in to the site using the setup account site is taking your xyz account credentials and so it
not showing any files as xyz obviously will not have access.
To confirm this, you can try by giving atleast read access to the local system account (in this case xyz) to the library and then test again whether you are able to see the files or not.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem.
s p kumar

Read other posts - still cannot see .htaccess files in DW CS4

Hi - I don't know if it's me or what, but I've read other posts and still cannot figure out why I cannot see .htaccess files through DW CS4. It says to go to VIEW but I do not have or see this option.
Here are some screenshots:
and of course the folder where you cannot see the .htaccess file

Mac OS 10.4 and earlier (and *nix systems in general) treat file names with a period in front as telling the file system that that particular file is supposed to be hidden. And thus it won't show up under the normal file system views. But the file is still there. To see it, open up Terminal and type:
defaults write com.apple.Finder AppleShowAllFiles YES
Relaunch Finder and now you should be able to see every invisble file on your machine. To return to default, go back to Terminal and type:
defaults write com.apple.Finder AppleShowAllFiles NO
and relaunch Finder and everything should be back to normal.
Or you can use one of the many utility apps out there that allow you to make these kinds of changes. (Cocktail comes to mind - http://www.maintain.se/cocktail).
Of course you can also build a workflow such as yours as well... :-)

I recently purchased a movie on i tunes which is not showing in my purchased file. I downloaded it on my ipad but cannot see the file on I tunes. Ipad lost so trying to retrieve a movie file. Any ideas please?

I recently purchased a movie on i tunes which is not showing in my purchased file. I downloaded it on my ipad but cannot see the file on I tunes. Ipad lost so trying to retrieve a movie file. Any ideas please?

The movie will only be where you put it.
However,in some countries you can redownload some movies:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Learn more about which content types are supported for iTunes in the Cloud by country, as well as where iTunes Match is available.

Cannot see the files I have uploaded into icloud

I I have a problem that I cannot see my files that I have uploaded into icloud. They do not show up when I sign into icloud. All I see is the normal apps that are normally there like "mail, pages, general, ect..." and not the files that I have uploaded into icloud. The icloud app on my ipad shows that they have been added to icloud but they seem invisable. I must be able to locate them so that I can resuse these file for my online class. The class only allows the file files to be used on an ipad or iphone. I have asked the people at Apple but haven't got a solution. I pray someone can help me. How can I find or see them? Thank you.

Once you download something it should be saved in your music library on iTunes. You should not have to go into the iCloud in order to retrieve it again. If it is the first time retrieving it sure there will be the cloud icon but after that there shouldn't be a problem unless something is set up incorrectly in your settings.

I downloaded Acrobat Pro 9 to a new computer and once a download has been completed i cannot see a file, only a grey window

I downloaded Acrobat Pro 9 to a new computer and once a download has been completed i cannot see a file, only a grey window

The updates are available via this FTP site: ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/
You need to download and install them in order.

Why can't a user see all files in a network share?

Windows Server 2008 R2 is sharing a folder. Advanced Sharing permissions give Everyone Full Control.
NTFS Permissions give the OU "Operations" read/modify permissions.
In the Operations OU, 1 user (let's call him John) cannot see all the files in this folder. For example, here is the real contents of the folder:
File1
File2
File3
File4
File5
Everyone in the Operations OU sees all the files, except John. When John opens the folder, he sees:
File2
File4
File5
Several files are simply missing from the list. I have no idea where to look for help on this one. The files are dynamically added to the folder each day, and each day are cleared out. So every day it is a new set of files being generated (they are coming
from a PDF printer). There is no pattern to which files John can see, and which he cannot. Does anyone have any ideas?
Jesse

I had the same problem, and it was related to permissions. My PCs are now running Windows 8.1 and folder properties are set to display file name extensions of all files. The 2 invisible files are File1 and File3 in your example. I have copied them to
both PCs. Computer A can see them on its own drive, and on computer B via UNC. Computer B can see them on its own drive, but not
on computer A via UNC. The cause: computer B didn't have permissions on these 2 files on computer A. I was starting the UNC directly from File Explorer, and, in my case, this uses HomeUsers for permissions (over my home network). So, on computer A, I gave
permissions on these 2 files to the user HomeUsers and that fixed the problem. I will also create a more general solution using inherited permissions.
Specifically, I selected the file and chose properties/security/advanced/add/select a principal, then typed HomeUsers "Check Names", OK, and selected the desired permissions. This fits your situation: the files are being created automatically and
don't have the correct permissions for the other PC to see them. Inherited permissions should fix it.
Tom

Cannot see NAS on my local network by its name (Linksys EA4500)

Hello,
I have just bought a new EA4500 and set it up at home. Most things worked like a charm except one. I can no longer see my Synology NAS on my home network byt its name.
I have the router connected to internet (local ISP, PPPoE). I have the NAS connected by wire, two Windows 8 PCs connected wirelessly. There is also a TV (wired connection), a printer, some Windows Phones and Kindles. One of the PC cannot see the NAS (the other can). It can connect to it by its IP (in browser, by ping), it can see its media server (I can play music from the NAS in my Media Player), the TV sees the NAS as DLNA media server... But the PC cannot see the NAS by its name.
If I list connected devices on the router settings, I can see the NAS and its name. But the PC cannot. What is wrong?
Both PCs have file sharing turned on. I have even SSH'd to the NAS ind successfully pinged the PC by its name. For full disclosure, the PC has VMWare installed with Windows 7 virtual machine.
I made no settings to the router other than going through the Cisco Connect wizard and disabling guest wifi.
Thank you very much for any suggestions.
Solved!
Go to Solution.

Thank you. Restarting everything didn't help. It happed to be solved by itself later on. I was fiddling with wifi settings and set (and unset) FIPS. Then it worked. No idea if it was a coincidence.

Cannot see OS9 file

Hello,
I use MacProjectPro. And as soon as it is made for OSX I am in line to buy it!
When I save a file from it I cannot see any subfolders below a fifth level.
I look for it where it says I saved it and I can't see it!
I have been able to search for it and find it in the finder but when I do the file appears to be the only file in the subfolder. Odd isn't it? I repaired permissions but I still get the same result. I have to copy it to the desktop and then put it in the folder where I want to find it in order to see it.
Does anyone know what is happening?
PowerBook G4 Mac OS X (10.3.9) Classic OS9

I have lead you astray. Off the software topic and on to the problem.
It appears that classic is not able to see OSX and is not operating as it has for the past three years.
I cannot open a file that was created in classic the way I have (i.e. by opening the application and then trying to open the file. The file is not visible. Conversely when I save a file from Classic I cannot find it from the OSX finder.
Up until yesterday this all worked seamlessly. The only thing that happened that I can identify is that the application crashed during use. But now none of the Classic applications work properly. Today I checked again and am experiencing the same problem.
On an aside. There is no software made for OSX that does network diagramming as MacProject did. In fact there is no software made today that does it properly. I will need to hire a software company who will do it. Alas. No one can solve my problem on that topic. I just bemoan it daily. (Although I have asked Steve Jobs to consider the issue.)
Let's not talk about software though. I would like my OS9 to work. I depend on it heavily.

Cannot see other PCs on the network

I'm using Leopard 10.5.6 on the new Macbook connected to the internet via Belkin router. the problem is I cannot see the other machines on the network which normally can be seen when i was using a PC.
I've already turned my SMB in System Pref/Sharing
additional information, sometimes, i was able to but see sometimes i wasn't, depends on my luck.
router ip 192.168.2.1
target PC 192.168.2.2
pls help.
thanks in advance and sorry for my bad English

Pisit wrote:
I'm using Leopard 10.5.6 on the new Macbook connected to the internet via Belkin router. the problem is I cannot see the other machines on the network which normally can be seen when i was using a PC.
Welcome to Apple Discussions:
I've already turned my SMB in System Pref/Sharing
That won't do anything. That only allows sharing From Mac To PC.
additional information, sometimes, i was able to but see sometimes i wasn't, depends on my luck.
Maverick says Luck has nothing to do with it
router ip 192.168.2.1
target PC 192.168.2.2
Can you ping the PC? That's the first step. In other words, can you see it on the most basic level?
Open a terminal and enter
ping 192.168.2.2
if that's the PC in question.
If you get a non-null response you are half-way there.
On the PCs, be sure you have file sharing turned on and also be sure you choose simple file sharing.
On the Mac, in the Finder Go menu, enter the IP of the PC where it says "Connect to Server" and you should get a login window. Enter the user id and password for an existing account on the PC.
That usually takes care of it.
pls help.
thanks in advance and sorry for my bad English

WebDAV problem - cannot see directories/files with space in filename

Using latest OS x 10.4.6 and can access my company's Sharepoint server via WebDAV.
However I only see folders/files that have no space in the filename - this is a major showstopper as I obviously cannot impose on rest of company how to name files.
PS: I can access this Sharepoint site via a webbrowser but I cannot easily upload/download files in the browser interface. Actually upload does not work in Safari (endless timeout) but it does work in firefox
PPS: Tried DAVExplorer and it could not even access the sharepoint site.
Help appreciated.,

Thanks Tim.
I am connecting to an external WebDav server - Sharepoint 2001/2003. As per above SP 2003 and OSX as client create all the troubles listed above..
Note: I compared console.log from my Sp2001 connections and SP2003 connections. Connecting to SP3 and gtrying to access a WebDav folder with directoriers/files containing spaces I see all kind of errors in console.log - see below.
Any comments?
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (finish != bytes) failed; going to _CFGregorianDateCreateWithBytes; file: mount.tproj/webdav_network.c; line: 118
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; file: mount.tproj/webdav_parse.c; line: 1115
May 8 01:14:57 nboegholm-OSX webdavd[13502]: (uriURL != NULL) failed; going to CFURLCreateWithString; fil

Cannot see zipped files in Windows Explorer

I used the code below to create a zip file. When I use Winzip to open a zip file named test.zip, I can see all the files (a.txt, b.class, etc.) that have been zipped. But, when I double-click on the test.zip in Windows Explorer (Windows XP Professional), I cannot see any of the zipped files.
Can someone give me some pointers?
import java.util.*;
import java.util.zip.*;
import java.io.*;
public class CreateZip
     public CreateZip()
     public void createZipFile(String[] all_array, String zipfilename)
          FileOutputStream pout; // declare a file output object
PrintStream p;
          String file_path = "D:\\Docs\\FedPlanner\\";
try
pout = new FileOutputStream(file_path + "FedPlanner_Zip_log.txt");
p = new PrintStream( pout );
               for (int i = 0; i < all_array.length; i++)
                    System.out.println("all_array = " + all_array);
                    p.println (all_array[i]);
p.close();
catch (Exception e)
System.err.println ("Error writing to file");
          byte[] buf = new byte[1024];
          try
               String outFilename = file_path + zipfilename;
          ZipOutputStream out = new ZipOutputStream(new FileOutputStream(outFilename));
               for (int i=0; i< all_array.length; i++) //
               FileInputStream in = new FileInputStream(file_path + all_array[i]);//filenames
               out.putNextEntry(new ZipEntry(file_path +all_array[i]));//filenames
               int len;
               while ((len = in.read(buf)) > 0)
               out.write(buf, 0, len);
               out.closeEntry();
               in.close();
          out.close();
          catch (IOException e)
               e.printStackTrace();
     public static void main(String args[])
          for(int i=0; i < all_array.length; i++)
               System.out.println("x = " + all_array[i]);
          CreateZip create = new CreateZip();
          create.createZipFile(all_array);

I have never created a zip file using Java . But from what i know about Winzip and Window Explorer, here's my takes on it:
1. Winzip works with severals different compression algorithm 9including their own)
2. Winzip has the ability to display the content of the zip file (if the zip file happens to be one of the compression algorithm they supported....otherwise, it's highly unlikely, winzip can even open the file)
3. Window Explorer does not call Winzip to display the content of Winzip file. rather, Window Explorer has its own utility to look into the Winzip for files and display them. Note: they probably only do this for the popular compression algorith (such as Winzip .zip, probably .tar...but highly doubtful of the one that Java use to make a zip file).
So..it's probably Window Explorer does not supports display that compression algorithm (the one Java use) for a Winzip file.
Example...you created a new format for an image call .mypics
Window Explorer can display a thumb nail for .bmp, .jpeg, and quite a few other
You created an application to display the image. Now..in Window Explorer, when you click on the icon, the thumbnail of the pic is not display...this is because Window Explorer does not have a util to do thumbnail for that format.

Can't See Some Files Across Mac Network

I have my Mac Pro tower (Leopard) set to completely share with my Mini (Snow Leopard). There a many folders and files residing on Pro I cannot see on Mini. Many seem to be Open Office files (although I can see many other Ooo files). I have tried moving the files that can't be seen manually from the Pro to the downloads folder on the Mini and they still doesn't show up on the Mini!

Hmmm, by the lack of response, perhaps this issue is unique?? I can't find anything on the internet that is this same prob I'm having either. Did I perhaps screw something up when setting the 2 Macs up to see each other?
There are also entire file folders I've made within Documents on the Pro (Leopard) that are just competley missing when I look for them on the Mini (Snowleopard). This is very strange as I can see all other sub folders in this particular master folder within Docs and the missing folder contains many and all sorts of files... not just Open Office files.

Cannot see RAW files after re-loading CS3.

My computer crashed so I re-loaded cs3 from the disks, but now it says that it won't update as Adobe is no longer supporting it. I cannot see my RAW files from my Canon d30 and d40. In the past when I had this problem, I just downloaded something and it fixed it, but that doesn't seem to be working this time. Are those update files available and usable anywhere or am I trying the wrong ones?

CaroleinStayton wrote:
I cannot see my RAW files from my Canon d30 and d40.
You mean the EOS 30D and EOS 40D?
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The EOS 30D requires Adobe Camera Raw 3.4
The EOS 40D requires Adobe Camera Raw 4.2
Photoshop CS3 shipped with ACR 4.0. So your 30D Raw files are readable now but you need an update for the 40D.
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
So update to ACR 4.6 and you should be set
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4041

Mediasource cannot see my files on a network dr

Similar Messages

Maybe you are looking for