MediaSource doesn't detect my no

I have the latest firmware, driver, and MediaSource versions, and when I want to transfer tracks into the nomad, I just can't see it and select it in the program.
(I have Nomad USB2.0 20GB)

ofirps,
Download the Nomad Type 2 plugin here. This is what SSR was referring to.
Jason

Similar Messages

  • Creative Mediasource doesn't detect zen to

    Hello,
    I have a Zen Touch and I have it for a year now but I had installed Creative mediasource a time ago again and now he doesn't find my mp3 player. But my Windows Media Player detects it and with WMP I can put music on my zen touch but not with CMS and I like to do it with CMS. I have installed all drivers and now I don't know what to do. Can anybody help?
    F-J

    What firmware version does the player have?

  • Mediasource doesn't detect device.

    i lost my installation cd and tried to put mediasource on my laptop by downloading the components online. i got the drivers and the application and something to do with sync manager but the program still wont' detect the device. the laptop itself is detecting it just fine.
    when i installed the application it said it wasn't detecting the device, and it would now download the necessary drivers for detection. it did, and it STILL wont detect the device. please tell me exactly what i need!!

    There should be a plugin to install - this is the bit specific to your player (which model do you have?) so it is needed. PB

  • My computer doesn't detect my Vision M 30

    It started with my player working however the screen was scrambled. I couldn't read anything. So I did the clean-up, format and reset the firmware but now my Vision M turns on and says there is a firmware problem and it says to reload the firmware. The screen is also still scrambled. So I hook it up to my computer but it doesn't detect it. Where is this firmware and How do I get the firmware on my player when my computer doesn't detect it's? I'm lost and don't want to send it in, if I don't have to. Please help!

    When you "reset" the firmware, you actually erased it. You can download the firmware from the Creative downloads page. You should check Windows Device Manager to confirm that it is connected, as the Creative programs, like MediaSource won't detect the player if it hasn't booted to an operational mode. As for the screen, something has probably gone bad in either the screen or the main logic board sending the image to the screen, but of course that also brings up the question as to how you were able to read the "Firmware Problem" message.

  • MediaSource doesn't acknowledge that Micro is connect

    I don't get it. I just reloaded my system, so i had to put the software back on, but now MediaSource doesn't know it's connected. I don't get the "docked" message on my mp3 player either, help? thanks
    -Me

    Did you get the correct plugin installed for the MediaSource software inorder to detect the player? If you're unsure of which plugin to install, post up your player firmware version.
    Jason

  • I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

    Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • How can I print from iPad to a Brother printer with a TP-link tl-wps510u connected to it without using a computer? It doesn't detect the printer.

    I have a Brother printer that doesn't have wifi, but I bought a Wireless Server Print to connect to it. I want the iPad can print directly to the printer without using a computer, but the iPad doesn't detect the printer. Is that possible?

    javigomez88 wrote:
    I know that Brother has an app that works with its wireless printers, even if they are not airprint. My printer isn't wireless, is a wireless print server attached to the printer what is able to make this printer wireless. Could this app be a solution or only would work with the wireless Brother printers?
    The Apps usually only work with wireless printers, though if its free, there is no harm in trying, and see if it gets picked up, but its doubtful, as the print server would need to transmit in the same protocol the Brother Print App is expecting from the supported wireless printers. 

  • HT5167 after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

    after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

    after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

  • What is apple doing. This macbook pro doesn't detect external display, doesn't detect my wacom..

    This is awsome. Cant work on this laptop... Doesn´t detect nothing.

    Hey there mrlrsm,
    Welcome to Apple Support Communities. 
    The article below provides troubleshooting tips that may help you resolve the issue with your MacBook Pro no longer recognizing the external display.
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Ciao,
    -Jason

  • My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones.

    My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones being plugged in after I installed Mountain Lion. If I reboot, it works but after a few unpluggings and more plugins, it doesn't detect them anymore until I reboot. Help please.

    This may or may not fix your problem.
    Try a NVRAM reset.
    Try a SMC reset.
    If neither work, you're just going to have to take your unit into your local Apple Store or AASP and see if you've a hardware issue.
    Good luck,
    Clinton

  • Since last update on itunes, my PC doesn't detect any of my devices. HELP!

    Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

    Hello andreaparra,
    Thanks for using Apple Support Communities.
    I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
    Take care,
    Alex H.

  • MacBook Pro doesn't detect tv as display.

    MacBook Pro doesn't detect tv as display when connected via Mini Display Port to HDMI adapter.

    Hi l,
    Is it possible to try another adapter? There have been a number of posts here about faulty adapters. Also, have you checked in Display Preferences? Selected the proper input on the TV?

  • [SOLVED] CUPS doesn't detect USB Samsung ML-2010 printer

    Hi. I only speak a little English. Sorry for that.
    I have got an USB Samsung ML-2010 printer. Before I used cups-usblp from AUR, and it worked. But it doesn't work now. The cups-usblp maintainer suggests to use cups instead of cups-usblp. Searching with google, it appears that other people don't have problems with this printer, cups, and archlinux. But I do. Cups' web interface doesn't detect it.
    Well, this is how are the things now:
    $ lsusb | grep Samsung
    Bus 002 Device 004: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer
    $ ls -l /dev/bus/usb/002/004
    crw-rw-r-- 1 root lp 189, 131 mar  4 09:56 /dev/bus/usb/002/004
    $ grep usb /lib/udev/rules.d/50-udev-default.rules
    # 'libusb' device nodes
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
    $ sudo grep SystemGroup /etc/cups/cupsd.conf
    SystemGroup sys root lp
    $ groups
    lp wheel games video audio optical storage scanner power users
    $ cat /etc/modprobe.d/blacklist.conf
    blacklist usblp
    $ lsmod | grep usblp
    (no output)
    $ cat /etc/udev/rules.d/10-cups_device_link.rules
    KERNEL=="lp[0-9]", SYMLINK+="%k", GROUP="lp"
    $ cat /etc/udev/rules.d/10-usbprinter.rules
    ATTR{idVendor}=="04e8", ATTR{idProduct}=="326c", MODE:="0660", GROUP:="lp"
    $ rc.d status cupsd
    :: Checking cupsd status                                                                                                   [STARTED]
    $ pacman -Q cups ghostscript gsfonts gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters splix
    cups 1.5.2-1
    ghostscript 9.05-1
    gsfonts 1.0.7pre44-3
    gutenprint 5.2.7-3
    foomatic-db 1:4.0.7_20110707-1
    foomatic-db-engine 1:4.0.7_20110707-1
    foomatic-db-nonfree 1:4.0.7_20110707-1
    foomatic-filters 1:4.0.7_20110707-1
    splix 2.0.0-11
    I open http://localhost:631 in my browser, click "add new printer" and I get just "Serial printer #1"
    at "local printers". There isn't my printer. I use KDE, and KDE's tool for adding printers doesn's detect it either.
    I miss archlinux, but I need to print.
    What may be wrong? What may be I am missing?
    Thanks a lot for your comments and help.
    Last edited by felihommen (2012-03-04 20:33:39)

    Solved!
    Restarting cupsd didn't work.
    But reinstalling cups...
    $ sudo pacman -Rdc cups (it is a dependency of kdeadmin-system-config-printer-kde which I had installed)
    $ sudo rm -r /etc/cups/*
    I realize cupsd is already running:
    $ ps aux | grep cupsd
    root      1549  0.0  0.1  75548  4080 ?        Ss   21:04   0:00 cupsd -C /etc/cups/cupsd.conf
    felipe    1690  0.0  0.0   8416  1028 pts/1    S+   21:13   0:00 grep cups
    I kill it
    $ sudo -SIGKILL 1549
    $ ps aux | grep cupsd
    felipe    1694  0.0  0.0   8416  1024 pts/1    S+   21:13   0:00 grep cups
    Ok. Reinstall cups
    $ sudo pacman -S cups
    Start cups daemon:
    $ sudo rc.d start cupsd
    Open firefox. Go to web interface, bla, bla, bla.... And it's there!
    I feel really silly. It was a fresh install, so I didn't think about reinstalling.
    Printed some jobs and worked perfectly. I used the gutenprint driver.
    Thanks a lot, pyther.  I thought yours wasn't a very useful suggestion, but it really was. I'm so happy. I owe you.

  • Disc stuck in disc drive but computer doesn't detect disc

    I put it in and it's stuck, and I tried a bunch of methods, but the computer doesn't detect the disc and I can't get it out. Help please!!!!

       If you have not tried any of these steps, try it.
       1. Restart the computer and hold the trackpad down.
       2. Launch iTunes and eject from there.
       3. Launch Terminal.
        Applications > Utilities > Terminal
        Type in   drutil eject internal
       Press enter.

  • IMac Doesn't Detect Headphones

    I have a ~year old 24" iMac (2.8 GHz Core 2 Duo) that I just suddenly started having a problem with. I use headphones pretty regularly and they are almost always plugged into the headphone jack. Recently, I lent my headphones to someone and, when I plugged them back in, the machine doesn't detect them. The audio works just fine coming out of the internal speakers, it's just that it always comes out of the internal speakers, no matter if the headphones are plugged in or not (the headphones also work fine when plugged in somewhere else). I took a look at the Sound Preferences panel and, sure enough, it doesn't detect the headphones as plugged in. Does anyone have any suggestions on troubleshooting?
    I'm not sure it matters, but I did just recently upgraded to 10.5.6. The headphones worked after the upgrade, but it may be that this is the first time they were replugged in after the upgrade.

    It sounds like the head phone jack has been damaged. If they were connected to a port they weren't meant for, that can happen. And that in turn, can damage your audio output port.
    Try disconnecting everything but the keyboard and mouse and reboot the iMac. See if that makes a difference.
    Resetting the SMC only provides this kind of support:
    -Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
    -Handling system resets from various commands.
    -Controlling the fans. so I doubt it can fix the audio issue.
    Check the headphone port really close, make sure there isn't any dust or link or anything that might keep the jack from connecting properly.
    Carolyn

Maybe you are looking for