MediaSource Organizer closes after it opens upon detection of the Zen Sle

Basically, i plug in the USB for my Zen Sleek, and then Creative MediaSource Organizer opens for a second then closes instantaneously. I don't know why this is happening. I look under processes in my task manager and i find CTCMS.exe running and so i try to end task it, but it will not let me. The only reason i find this would be happening is because i recently (just today) installed a new Sound Blaster Audigy 2 sound card. Is there any way of fixing this problem? And by the way, if i do need to uninstall/install the MediaSource Organizer again, will all of my playlists be deleted? (took me a looong time to get those playlists organized)Message Edited by mdjstudios on 2-3-2005 03:52 AM

I am pretty sure that it is caused by the Audigy 2 drivers. I have seen other users having the same problem, and have fixed the problem by updating their Audigy 2 drivers. You should update your Audigy 2 drivers. Let us know if it works for you.
And don't worry. The playlist will not be deleted when you unintsall MediaSource. The entire PC Music Library, including playlists are kept intact.

Similar Messages

  • Viber shuts down / close after i open it , tried reinstall

    Viber shuts down / close after i open it , tried reinstall .. Deleting and installing again ..
    Can too much groups cause this ? ..
    What to do ?
    I have iphone 4s 5.1.1
    Thank you .

    Hi guys!
    This is a member of the Viber Team.
    Please contact our support team for further assistance at: http://helpme.viber.com/index.php?/Tickets/Submit/RenderForm/13
    Please feel free to let us know your thoughts, questions and comments, we'd be happy to assist.
    Thanks,
    Viber Team

  • All applications close after being open for 1 minute.

    Recently, all applications I open on my Mac close after being open for 1 minute.  Safari and Microsoft word do not stay open for longer than 30 seconds.  Prior to this, my computer would freeze and eventually applications would close. I'm not sure why this is happening or how to fix it. Does anyone know what could of happen for everything to close after opening it? Any help would be great, thanks!

    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

  • Firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything

    firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything, plus there is no option to report an error so i cant even get this checked and this seems to be the case on 3 different computers i use all have windows 7 32bit.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • Lightroom closes after I open the development module

    For several weeks, I have been facing a new incident.
    As I am opening the development module, Lightroom closes after a couple of seconds.
    This does happen on all versions but 1.0.
    If you have a clue..
    Vincent

    Thank you both very much for the advice.
    I downloaded Speedfan and discovered that the graphics card is indeed under some stress at the time of the crashes.
    I've also found out that if I close all running programs, it causes less heat so doesn't crash and close.
    When I come to upgrading this pc, I'll definitely be making sure a better cooling system is on the list lol.
    Once again, thank you. It's much appreciated.

  • Why does Firefox close after being opened for too long with no activity?

    I need to leave an image loop playing on my computer continuously but the internet browser seems to time out after being opened for more than 14 hours. Is there a way to keep my internet browser opened with out activity for as long as I choose?

    This is not a cure but will make it easier if Firefox locks up.
    '''https://support.mozilla.org/questions/997866''' {web link}
    From what I have been reading from other posts on this forum, the
    issue may be caused by the clear history settings. It was suppose
    to have been fixed in v30.
    Press the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.

  • IBooks closes after I open a book

    I am using the new OS (7.0.3) and experiencing a problem new since the new OS was installed.  I open iBooks and see the shelves with books I've purchased, but when I tap a book, the screen returns to the home page.  I have turned the iPad off and on and reset it, but to no avail.

    Thank you both very much for the advice.
    I downloaded Speedfan and discovered that the graphics card is indeed under some stress at the time of the crashes.
    I've also found out that if I close all running programs, it causes less heat so doesn't crash and close.
    When I come to upgrading this pc, I'll definitely be making sure a better cooling system is on the list lol.
    Once again, thank you. It's much appreciated.

  • Are they getting any closer to releasing a new firmware for the Zen Tou

    I mean so I wouldn't have to use stupid Mediasource to transfer music, and could just plug my Z. T. into any computer and transfer music. It seems to me that some bright consumer could write a program to do this, or is it impossible for this to happen for some reason?

    I think its pretty bad that a company that made over $375 million in Q2 and reported sales of over 2 million mp3 players is putting such little investement into providing updates for existing (still on sale) products, mainly the Zen Touch and Zen Extras... They seem to think that only Zen micro users deserve Firmware updates despite the fact that a large number of us have bought and continue to buy other existing creative models! Surely with such high profit and demand they must be able to put more resources into updates for their players (mainly Firmware), or at worst give us a serious time frame as when to expect the updates (if i had known how long i would be waiting i might not have bought my Zen Touch in favour of a differnet player). I have always looked upon Creative as a very trustworthy company that deli'very high quality and high spec products. I never for a moment thought that the updates would be so few and far between! I am afraid to say I am dissapointed :smileyindifferent:.Groan over!:smileyvery-happy:Message Edited by lukeg_uk on 02-8-2005 2:29 AM

  • Div Slider won't close after it opens

    Hello,
    I'm playing around with some social media sliders and am running into a bit of trouble.
    I am starting with the Facebook slider.  It opens perfectly fine, however, after that, it will not fully close.
    I'm new at this particular task so I thank you in advance for your patience.
    http://www.saintleo.edu/SocialMediaSliders/TABS.html
    Kind regards,
    JK

    Hi Jon,
    Still working on the same project.  Tried to copy the settings for the most part from the working Facebook slider for the Twitter slider, however the tab is inside of the div for some reason.
    I can't figure out the difference for the life of me.
    I ran it through the validator, but didn't see anything.
    Would you mind taking a look?  You seem to be pretty confident with this stuff.
    Thanks again for the help.  I'm trying to learn so I thank you for your patience.
    http://www.saintleo.edu/SocialMediaSliders/TABS.html
    JK

  • Photoshop closes after I open a picture.

    Hello.
    I have downloaded Photoshop CS4 on a trail basis.
    It starts up fine, but as soon as I open a picture file and start "chopping", it crashes for a couple of seconds then closes with no warnings or error messages. As you can imagine this is rather annoying, especially when I'm halfway though doing something.
    Just before it crashes, I can hear my pc speeding up. I don't know whether this might have something to do with it?
    I'm rather pc illiterate I'm afraid, so please excuse my ignorance of the tech speak.
    Thank you.

    Thank you both very much for the advice.
    I downloaded Speedfan and discovered that the graphics card is indeed under some stress at the time of the crashes.
    I've also found out that if I close all running programs, it causes less heat so doesn't crash and close.
    When I come to upgrading this pc, I'll definitely be making sure a better cooling system is on the list lol.
    Once again, thank you. It's much appreciated.

  • Has anyone else had a problem with closing their Macbook Pro (latest model) and after you open it back up the internet shows as connected but won't pull up websites whatsoever?

    Occasionally, I will close my Macbook Pro when I'm not using it, and when I reopen it my wireless network shows as being connected, but the internet will not function whatsoever.  I tried disabling the WIFI and re-enabling it but the problem persisted.  Ultimately I have to just restart then everything works fine.  I even tested my cell phone (which uses my home WIFI also) and was able to pull up websites, which isolates the problem to the computer.
    Seems like after the computer goes on Standby or Sleep, it only has the trouble immediately after.  Any help will be greatly appreciated!

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Bridge does not remember last folder opened upon reboot of the OS

    I recently re-installed Win 7 64 on a new HD, and after all the folderol of that operation (Windows updates, SP1 etc) Bridge does not seem to remember where it was when the computer is rebooted. When I open Bridge, all I get under Favorites/Folders is Desktop and Computer, under which I have to run down all the HD's, folders, subfolders again to find where I was last. It works correctly in XP but not Win7 64 Ultimate.
    Am I missing something in the setup?

    Yep.
    Checked XP and it is unchecked there as well.
    Thanks, Curt Y!

  • How do I close multiple documents opened in Finder when the files are loading and the Application is not responding?

    I was moving 90 files from one folder to another and instead accidently double clicked all the files I had selected and they all opened at once and now they are all stuck trying to load and the program is not responding.
    When I put my mouse over the folders, it's just the loading cursor so i can't select anything. I've tried using 'command' - 'option' - 'W' and that doesn't work either.
    I have tried restarting finder and all that does is shut all of the folders and reopens them and they get stuck trying to load all over again.
    I have tried restarting my macbook and every time I log back in, it restarts all the programs and all the finder windows and the whole process repeats.
    (even when I unselect the 'restart opened programs' box.)
    I really hope someone knows how to troubleshoot this problem I am having!

    You're trying to use Spry Accordions for something they were never intended to do.   Why don't you switch to a more appropriate jQuery Mega Menu?
    http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
    In case you missed the announcement, Spry is dead.  Adobe abandoned it late last year because it has outlived its usefulness.
    http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
    Nancy O.

  • Open thermocouple detection on the 1120

    I am using an SCXI 1120 module with a 1320 terminal block to take temperature readings from k-type TCs. When we disconnect a TC the reading for that channel goes to around 272 C, which is in our measurement range. How can I get that reading to go out of range when the TC is removed?

    Hello GlennXS,
    All of the open thermocouple features I know of in NI hardware is taken care of in the driver.  In addition to this, the hardware needs to support this functionality as well.  The previous discussion should work well, but I do not know of a library that does this for you.  All it really is is just 2 separate tasks (a resistance measurement and then a thermocouple measurement).  You should be able to program this yourself using the DAQmx calls relatively easily.  I would suggest looking at the example programs (C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples).
    If you give me more details about the hardware you have and what you have tried, then I can try and help you out more.
    Neal M.Applications Engineering       National Instruments        www.ni.com/support

  • Can I have more than one home page so that both would open upon connecting to the internet?

    On my desktop I can have more than one home page so that they all load when I connect to the internet.
    On my laptop, I cannot figure out if or how I can add a second home page. Is it possible to have more than one home page on my laptop?

    Firefox can have more than one homepage. Multiple homepages are separated by the keyboard character "|".
    *See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Maybe you are looking for

  • XML "Document root element is missing"

    i have made a research in the forums but i have no definite solution about the error. my flash client sends XML stream to my ServerSocket. and i want to parse these XML datas. Document XMLDoc; DocumentBuilderFactory Factory = DocumentBuilderFactory.n

  • Is there a way to include S/MIME encryption on messages sent from the Photos app?

    I have encryption set up and working on my Exchange account, but I also want to send attachments with the encrypted messages. When I try to send images as attachments by selecting the "share" option in the Photos app,the message that is created does

  • Does a European iPhone 4 work in South America (Ecuador)

    I have an iPhone 4, originally purchase in the UK, officially unlocked from the the original network operator (O2) Can I use this in South America (specifically in Ecuador) where they run on 850/1900 GSM with a SIM purchased locally? If not, is there

  • Roll-up and Drill-down in JOLAP

    HI!!!! I'm studing the JOLAP specification and I don't understand how to implement the drill-down and roll-up operations. Where can I find some example about it? HELP, PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • XBLNR_ALT

    Hello, We have a requirement here to make a substitution to the XBLNR_ALT field for Italy. We already set up all the necessary and everything is working perfectly for the ODN piece. The requirement is now to create a substitution for other document,