Mediator Error Handling in SOA11g

Hi All,
I ahve mediator as composite entry point and i am inovking another service from Mediator,
If the webservice is donw it is throwing an remote fault and tha should be propogated to Mediator and i wanted to handle all the fault using Fault policy file and i wanted to use sequnetial routing rule onl..
Any help is highly appreciated.
Thanks,
Nagaraju D

Post this in soa suite forum
SOA Suite

Similar Messages

Mediator error handling

Hi,
We are trying to achieve mediator error handling. We have a developed a composite with mediator which calls another service,which is deployed on server. Later we shut down the web service ,resulting in the error
"ORAMED-03303:[Unexpected exception in case execution]Unexpected exception in request response operation "process" on reference "mediator_service". Possible Fix:Check whether the reference service is properly configured and running or look at exception for analyzing the reason or contact Oracle Support Services. Cause:javax.xml.ws.soap.SOAPFaultException: Message Router for default/HelloWorld2!1.0*soa_02aa2ef3-ffb8-4606-87f0-a79bc4bed157 is not able to process messages. The composite state is set to "off". The composite can be turned "on" by using the administrative consoles."
Our intention is to catch this using fault policies....but my fault -policies.xml is not catching the fault.
I am attaching the fault-policies.xml file.
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies xmlns="http://schemas.oracle.com/mediator/faults/faultpolicies"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<faultPolicy version="2.0.1" id="CRM_ServiceFaults">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:03303">
<test>contains($fault.mediatorErrorCode,"ORAMED-03303")</test>
<condition>
<action ref="webservice"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id='webservice'>
<invokeWS uri="http://10.96.8.58:7001/soa-infra/services/default/POC_WEBSERVICE/bpelprocess1_client_ep?WSDL"/>
</Action>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>2</retryInterval>
<exponentialBackoff/>
<retryFailureAction ref="ora-java"/>
<retrySuccessAction ref="ora-terminate"/>
</retry>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Can anyone please help us on this.

HI,
I too have the same issue:
here is the fault policy i have defined:
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies>
<faultPolicy version="2.0.1" id="ConnectionFaults">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:mediatorFault">
<condition>
<test>contains($fault.mediatorErrorCode, "TYPE_FATAL_MESH")</test>
<action ref="ora-retry"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>2</retryInterval>
<exponentialBackoff/>
<retryFailureAction ref="ora-java"/>
<retrySuccessAction ref="ora-terminate"/>
</retry>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
TYPE_FATAL_MESH: Contains fatal errors from the Service Infrastructure such as Invoke service not available. ---- This is available from ORacle Documentation...
Not sure why the retry is not happening and also I am not able to see any flow trace for the fault policy////
I want to know whether the fault policy is getting triggered or not??? where to check this??
Please let me know if somebody resolved this?
Thanks,
Sri..

Transaction and Error handling in Mediator 11g

Hi Experts/Gurus/All,
We have following scenario in Mediators :-
For Inbound Interfaces :-
M1-->M2-->M3
M1 calls M2 and M2 calls M3
There are 3 mediators, Mediator#1(M1),Mediator#2(M2) and Mediator#3(M3)
M1 performs a FIle Read and do a ABO-->OAGIS conversion
M2 performs routing
M3 performs a OAGIS -->ABO(JDE E1) conversion.
Now,we are in middle to decide the Fault Handling Mechanism for this case.
M1 is Asynchronous , M2 is Synchronous and M3 is also Synchronous.
Question is :
1. M1 will start a new Transaction,Do M1 will propogate the same transaction to M2 which,as being Synch,propogates the same transaction to M3 ?
2. How will the commit and Roll back will be taken care of?
3. What if M1 errors out?
4. Whatif M2 errors out?
5. What if M3 errors out?
In question 3,4 and 5:
What will happen will the Full Transaction ? If M3 erros out,would the Entire Transaction Propogated by M1 will be roll back?
Also ,How about Error handling in this case:
Do I need to create seperate fault-policy.xml and fault-binding.xml for M1,M2 and M3 ?
Another Scenario is of OUTBOUND interfaces :-
M1-->M2-->M3
M1 calls M2 and M2 calls M3
However , M1,M2 and M3 are all Asynchronous.
In this scenarios how would I handle following :-
1. If M2 Errors out,I need the entire Interface which comprises of M1-->M2-->M3 to roll back?
2. If M3 Errors out,I need the entire Interface which comprises of M1-->M2-->M3 to roll back?
3. Seperate Transactions means I have to create seperate fault-policy.xml and fault-mapping.xml to handle errors?

Hi,
You could create a package, and use the OdiSqlUnload to export the data into a flat file (csv) from snp_check_tab, then amend it. Then create an interface to load the data from the flat file to your tables, either via external tables or SQL Loader.
Question is, why are you amending data going from source to target? there surely has to be something wrong with the Architecture (especially if you are getting errors in production). If you amend data, so that it is different in source as it is in target, then when it comes to regression testing, this will never match.
The errors should go be fixed at source, and either you, or the business should have access to do so.
Cheers
Bos

Error Handling in Mediation for sequential Invocation in Routing rules

Hi all,
I have a situation File Adapter->Mediator->BPEL Process 1->BPEL Process 2.When an error occurs in BPEL Process 1 a soap fault is returned to the mediator service.
Now since the mediator service invokes BPEL process 1 synchronously hence the fault policy is by-passed and the error is returned to the file adapter(the caller).
I have configured rejection handling in the fault-policy file as below -
_+<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:pollFlatFiles">+_
_+<condition>+_
_+<action ref="ora-ws"/>+_
_+</condition>+_
_+</faultName>+_
_+<service faultPolicy="RejectionMessageHandlerPolicy">+_
_+<name>pollFlatFiles</name>+_
_+</service>+_
The following scenario occurs when trying to test the error handling -
1.First when the error occurs in BPEL processes 'oracle.fabric.common.BusinessFaultException' is thrown at the composite level and no message is rejected by the file adapter.
2.Immediately when the errors occurs for a second time the messages gets rejected and my rejection handler is called since the following exception is thrown from the file adapter -
The adapter has exceeded maximum configured retries. The adapter was unable to process "{0}" after having retried for {1} times, now the adapter will reject the message. This exception usually comes due to errors in downstream systems. Please increase the value for "jca.retry.maxRetries" in composite.xml for the inbound service and redeploy.
I have tried increasing the retry count also in composite.xml but the same sequence occurs i.e-
First time business exception.
Next time message rejection.
Any idea how the error can be properly handled in synchronous invocation to avoid this situation so that the messages always get rejected?
I am using SOA Suite 11.1.1.2.0 version.
Thanks and Regards,
Mandrita.

Hi samay,
In the transfer rules, if returncode is not 0, the upload stop,so..
Actually I delete the "wrong" data in the start routine of the transfer rules

How to handle Error Handling In Mediator.

Hi guys,
Accually my reqirement is need to handle Error exception in Mediator. I am new for Meditor.
we read source file through Mediator and route the data to Database Table in betwen need to handle Error Handling...What type of Fault handling we can do here..? plese refer any solution and sample interface URL me....Thank you

http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/med_faulthandling.htm#CHDJAADA

Can error handling framework use fault policies and BPEL catch blocks

As part of an integrated customer solution that makes substantial use of SOA Suite (including OSB, BPEL, Mediator, etc) we are in the process of designing an “Error Hospital” subsystem to expose a web service API specifically for BPEL services and/or the OSB layer to call whenever they encounter an exception which they cannot handle so that the appropriate user is notified of the error (via email) and the error is recorded (in an appropriate common fault format, with error codes elaborated into more meaningful descriptions, etc) within OEM, immediately prior to returning the exception to the caller.
The problem we have experienced in our design is as follows:
•     We have an error handling service to be called, inside the BPEL catch blocks, when an error occurs to notify the appropriate user, via email, that an error has occurred;
•     We also use the error handling XML fault-policies so that we can recover from an error using OEM (via human intervention);
•     The error service needs to be called before the process is suspended (waiting for human intervention) so the email notification and error message formatting occurs BEFORE the recovery action. Unfortunately the fault policies trigger BEFORE the error handler is able to transform the error into the appropriate format and notify the user so the error recorded is not the reformatted one and the user is never notified.
The key question is how can a BPEL, upon catching an exception, invoke the error handling service and AFTER that send the error to OEM (and have the process suspended).
It seems the two mechanisms "cannot play nicely together"

As part of an integrated customer solution that makes substantial use of SOA Suite (including OSB, BPEL, Mediator, etc) we are in the process of designing an “Error Hospital” subsystem to expose a web service API specifically for BPEL services and/or the OSB layer to call whenever they encounter an exception which they cannot handle so that the appropriate user is notified of the error (via email) and the error is recorded (in an appropriate common fault format, with error codes elaborated into more meaningful descriptions, etc) within OEM, immediately prior to returning the exception to the caller.
The problem we have experienced in our design is as follows:
•     We have an error handling service to be called, inside the BPEL catch blocks, when an error occurs to notify the appropriate user, via email, that an error has occurred;
•     We also use the error handling XML fault-policies so that we can recover from an error using OEM (via human intervention);
•     The error service needs to be called before the process is suspended (waiting for human intervention) so the email notification and error message formatting occurs BEFORE the recovery action. Unfortunately the fault policies trigger BEFORE the error handler is able to transform the error into the appropriate format and notify the user so the error recorded is not the reformatted one and the user is never notified.
The key question is how can a BPEL, upon catching an exception, invoke the error handling service and AFTER that send the error to OEM (and have the process suspended).
It seems the two mechanisms "cannot play nicely together"

Mediator Exception Handling without fault policies

Hi,
Could somebody help me on defining exception handling to MEDIATOR component?
Is there is a way where we can do this without using the fault policies?
Thanks,
SV.

Business faults are application-specific and are explicitly defined in the service WSDL file. You can handle business faults by defining the fault handlers in Oracle JDeveloper at design time. System faults occur because of some problem in the underlying system such as a network not being available. Oracle Mediator provides fault policy-based error handling for system faults.http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/med_faulthandling.htm
Regards,
Anuj

Error handling with example

Hi,
Can any one explain please
1.Why we need to create XSD,
2.What is the use of dehydration,
3.Types in XML
Please explain any error handling with example.

Hi',
1.Why we need to create XSD,
This is used as the input/output for the webservice/BPEL
2.What is the use of dehydration,
This is used to save the state of the composite/BPEL/Mediator in the database
3.Types in XML
complex, simple
Error handing in file
http://yatanveersingh.blogspot.com/2011/09/fault-handling-in-file-adapter-for-csv.html
-Yatan

How to take control back from service error handler in osb

I am using osb to send data to multiple services at the same time.since x query is a procedural language if any single operation fails the flow goes to service error handler which calls a BPEL webservice and logs the error in a database but the control doesnt comes back to my code I have tried everything including RESUME,REPLY operations but all in vain similarly i cannot use service callout call to my business service because its not allowing to select my BPEL wsdl operation

If your statement "the control doesnt comes back to my code" means you expect that your xquery will continue in processing than your expectations are just too high. :-)
Resume action is supposed to resume the next action in the message flow. It means the action that follows the action which caused an error.

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

LV7.1 Strange behavior with Automatic Error Handling occuring when it shouldn't [LV 7.1 Pro on WinXP for Tablet PC's]

[LV 7.1 Pro on WinXP for Tablet PC's]
I recently let a rather large LV app of mine run in the development environment while I was out for a couple of days. Upon returning I found that the app had hung for ~22 hours waiting for an answer to an Automatic Error Handling (AEH) dialog proclaiming an Error 7 in New File without any indication of the VI hierarchy that called New File. I set about ensuring that AEH dialogs would not pop up and have not been able to discover how I could have possibly received one in the first place.
Subsequent investigation revealed:
Neither AEH option in Options>Block Diagrams were checked.
Network problems had occurred around the time that the app had hung. All file paths are network paths when running in the development environment, so the cause of the error was most likely valid, even if the AEH dialog appearance wasn't.
My app has only one instance where the New File primitive is used by me. That subVI and all others above it in the hierarchy DO NOT have the AEH property enabled. The error out cluster of New File in my subvi is wired.
My app has three instances where New File is called from a vi.lib vi (Open/Create/Replace File.vi, Open Config Data.vi, and Prompt Web Browser Path.vi), none of which have the AEH property enabled. Nor does any of their calling VI's. All three instances also have their error out cluster wired.
A utility to examine the AEH property of all VI's (with all top level and dynamic VI's loaded) in memory reported that only 1 of 308 vi's ( RGT Does File Exists.vi from the Report Generation Toolkit) had that property true. That vi has no subVI's other than the File/Directory Info primitive and no calling VI's in common with any of the vi's that call New File, except a top level VI.
As long as 'Enable automatic error handling dialogs' remains unselected in options>block diagram, I am unable to get an AEH dialog for either the New File or File/Directory Info primitives in a test VI with AEH property enabled and their error out clusters unwired no matter what invalid path I pass to the functions. As soon as the options>block diagram>Enable AEH dialogs' is selected, both primitives fire AEH dialogs with no error out wired and don't when wired. i.e. works as advertised.
In other words I can find no reason why I should have gotten the problem AEH dialog...
I cannot afford for this app to hang because of a network problem, other portions of the app that were running concurrently correctly handled the error and, had the AEH dialog not appeared, the app would have made corrections or shutdown in an orderly fashion.
Any ideas?

Very good.
Write Characters to File.vi>Open/Create/Replace File.vi>New File
New File throws the error. Open/Create/Replace strips the hierarchy from the source of the error. Write Characters passes it to the General Error Handler. I never looked above O/C/R file in the hierarchy except for enable automatic error handling property. The tip-off should have been to realize that O/C/R file was stripping the hierarchy from the error and look above that.
The real irony is that Write Characters was being used to log error cluster data to an error log file...
Save as... Copy without updating... the OEM 'Write Characters to File' is gone from this app.
Thanx (a bunch)

Error handling in process chain-doubts

Hi ,
I have some doubts in error handling of process chains.
1) I have aprocess load infopackeage and subsequent process is update fromPSA.
process load infopackage got failed , so i loaded the IP manually and repeated the next i.e process update from PSA .
How to correct the process chain from now?
2) I have aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed , so i loaded the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
Plz help me as this is urgent and daily i have to deal with this issues. If any documents on error handling is greatly appreciated.
My mail id is [email protected]
Regards,
Pavan

Hi Pavan,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Issue with SRDemo error handling

Hi All,
Glad the forums are back up and running. In debugging some error-handling issues in our own application, I found an issue in the error handling code of SRDemo. I thought I'd post the issue here, as many of us (myself included) use some SRDemo code as the basis for our own applications.
The issue can be found in the oracle.srdemo.view.frameworkExt.SRDemoPageLifecycle class, specifically in the translateExceptionToFacesErrors method. I'll show the code that has the issue first, and explain the issue afterwards:
        if (numAttr > 0) {
            Iterator i = attributeErrors.keySet().iterator();
            while (i.hasNext()) {
                String attrNameKey = (String)i.next();
                 * Only add the error to show to the user if it was related
                 * to a field they can see on the screen. We accomplish this
                 * by checking whether there is a control binding in the current
                 * binding container by the same name as the attribute with
                 * the related exception that was reported.
                ControlBinding cb =
                    ADFUtils.findControlBinding(bc, attrNameKey);
                if (cb != null) {
                    String msg = (String)attributeErrors.get(attrNameKey);
                    if (cb instanceof JUCtrlAttrsBinding) {
                        attrNameKey = ((JUCtrlAttrsBinding)cb).getLabel();
                    JSFUtils.addFacesErrorMessage(attrNameKey, msg);
            }Now, this bit of code attempts to be "smart" and only show error messages relating to attributes if those attributes are in fact displayed on the screen. It does so by using a utility method to find a control binding for the attribute name. There are two issues with this code, one obvious, and one that is a bit more subtle.
The obvious issue: if there is a binding in the page definition, it doesn't necessarily mean that the attribute is shown on the screen. It's a good approximation, but not exact.
The other issue is more subtle, and led to errors being "eaten," or not shown, in our application. The issue comes if you are using an af:table to display and update your data. In that case, the findControlBinding will not find anything for that attribute, since the attribute is contained within a table binding.
Just posting this as a word to the wary.
Best,
john

somehow, this message got in the wrong thread....
Hi Frank,
Yes, I simply scripted it out this way to contrast the behaviour if the first attribute was read-only vs not read-only. I found the issue on a page in our app that was simply drag-and-drop the VO from the data control on the page.
It's quite annoying, because our particular use case that hit this error is a "save" button on the page. If the commit operation doesn't return any errors (and it doesn't in this use case!), we add a JSF message saying "save successful" - then the attribute errors are further added later in the page lifecycle, so we get 3 messages: "Save successful" and "Fix this error" and "Tried to set read-only attribute" - quite confusing to the end-user when the only message they should see is "fix this error."
At any rate, the fix is to simply re-order the attributes in the page definition - that doesn't affect the UI at all, other than to fix this issue.
John
it was supposed to be something like:
Hi Frank,
Thanks for the reply. I was simply posting this here so that people who use the SRDemo application techniques as a basis for developing the same functionality in their own apps (like me) can be aware of the issue, and avoid lots of head-scratching to figure out "what happened to the error message?"
John

Error Handling in File Adapter

I have been working on a requirement where the file adapter picks up the file and gives to the BPEL for processing the data.
So, in order to do Error Handling for file adapter, i have been reading the Oracle documentation for technology adapters. In that, some of the
points which i felt valuable for my error handling when using file adapter are the uniqueMessageSeparator property, fault-policies for rejected messages,
and one of the action for rejected messages could be writing the payload to a file or invoking any other webservice.
In my composite, i have configured the file adapter as a service for reading files, and i defined the xsd using the native format builder....If i put some data like 'aaaa' in the attribute of type integer , the .csv file is being picked up and its being passed to the BPEL without any error ? I believe there should be a translation error...right...
But i am not getting the error, please tell me if anything is wrong in my xsd....
Here is my xsd...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/InboundService"
targetNamespace="http://TargetNamespace.com/InboundService"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="names">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
And for DB Adapter, there is a property called SchemaValidation, i think that is not there for File adapter, by default it will take care of validation i guess....In another composite, my file adapter is picking up the .xml file and if i put any wrong data over there, that is working fine, i am getting the translation error, but only here in the case of csv file, i am not getting the error. Experts, please help me in this regard...I am using SOA 11G
Thanks,
Naresh

Hi Yatan,
Thanks for the reply. I did the same way, where my composite is picking up an XML file and translation error is coming. Even the fault policies are working fine, like writing to a file and even invoking other web service. Its really good that you have achieved the same thing in csv files. But the same thing i am unable to achieve when my file adapter is picking up the csv file. I really cant understand where i am doing wrong.
here is my XSD which i defined through my native builder format...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/FileRecv"
targetNamespace="http://TargetNamespace.com/FileRecv"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="Roots">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
the jca file ..
<adapter-config name="FileRecv" adapter="File Adapter" wsdlLocation="FileRecv.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="n*.csv"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
<property name="DeleteFile" value="true"/>
<property name="MinimumAge" value="0"/>
<property name="PhysicalDirectory" value="C:\files"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="5"/>
<property name="IncludeFiles" value="n.*\.csv"/>
<property name="UseHeaders" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
I told that the file will contain only 1 record while defining xsd and i kept a record whose values are John , Peter and akjdkjdskj.
Now if the data is like above, the file is still getting picked up without any translation error and the BPEL is getting completed successfully...
Is it possible for you to send your sample project and the csv file from which you have defined the xsd to me if you dont mind ?
Thanks,
Naresh

Mediator Error Handling in SOA11g

Similar Messages

Maybe you are looking for