Medical Collection date different from actual EOB date Central State Recovery

Hi, New posting to this particular forum as I usually stay on the Mortgage site, but this issue might be more suited and possibly get an answer here. So I have been disputing the charge for the last two years, but since I am trying to buy a house, I called and asked if they would do a PFD and from others' posts I knew that this particular company would not do so. It was just $25.20 so I paid it. The issue is that the date they say the EOB shows is Sept 2011 but the date the CA reports on my report is 02/21/2012. Is that something that can be changed or am I stuck with that date until June 2018? They do not report to TU just EX and EQ. Any advise would be appreciated. Equifax FICO 850/ Score 5 710TU 826/ Score 4 797Experian 840/ Score 2 699

lilbitinok wrote:
Hi, New posting to this particular forum as I usually stay on the Mortgage site, but this issue might be more suited and possibly get an answer here. So I have been disputing the charge for the last two years, but since I am trying to buy a house, I called and asked if they would do a PFD and from others' posts I knew that this particular company would not do so. It was just $25.20 so I paid it. The issue is that the date they say the EOB shows is Sept 2011 but the date the CA reports on my report is 02/21/2012. Is that something that can be changed or am I stuck with that date until June 2018? They do not report to TU just EX and EQ. Any advise would be appreciated. Equifax FICO 850/ Score 5 710TU 826/ Score 4 797Experian 840/ Score 2 699If the EOB is the billing date from the OC the date in 2012 is the date the CA got the collection, they still have to operate from the accounts DoFD as far as the max time it can remain on file. I would start a GW letter campaign to the CA asking for its removal.

Similar Messages

DBV-00103: Specified BLOCKSIZE (2048) differs from actual (8192)

[i]Hi all,
I was performing the dbverify of the files to check it. It gives me a error
kindly help me
DBV-00103: Specified BLOCKSIZE (2048) differs from actual (8192)

just take a look
http://tek-tips.com/viewthread.cfm?qid=1112866&page=9
http://www.orafaq.com/forum/t/21449/0/Message was edited by:
user52

Email notification different from actual post

Something I just noticed and am wondering about. Recently I have received some email notifications that are quite different from what is actually posted on the thread. In one, the link was different and there was some differences in wording. In another, there was more text in the post than there was on the email. This seems different from what I am accustomed to seeing, which would often be edited versions of the same post. It seems like the email is an earlier version of the post, but I can't be sure. It has sparked my curiosity, and I am just wondering why this is happening. Has anybody else noticed this?

S.U.,
As Miriam states, unchecking the edit box will cause the reply to not have that info.
I, like Miriam, will occasionally uncheck the edit box but in my case it usually has to do with the fact that I have edited the post more than once and found that if I don't uncheck the edit box on successive edits there will be a long string of edited text below the post. Just cleans up the post a bit. I too, have been guilty of vanity in editing, as I'm sure that most are here.....after all, aren't we all perfect typists here?
littleshoulders

Number of photos in ABOUT is different from actual number of photos in gallery

Hello. I've been trying to save space on my iPhone 5. And it said on the 'usage' that my photo library is taking up 1.5Gb of the memory. That sure is big, so I deleted some photos. There were only a few that I deleted, and only a few left now. But in the 'ABOUT' it said that my photos are 361 and videos are 8, which is not the same with the actual photos i have in my gallery. i only have 15 photos and only 1 video. I want to free up that very huge space. What should I do?

Try to watch if the songsare uncheked.if so that's the prlblem.check the songs and update ipod.or, if you want to disable that function go to :
edit>perferences>Ipod>music> and see if the box"Only update checked songs" is checked, if it is uncheck it. this sould solve your problem

GR value different from actual value in limit PO

Experts,
We created a limit PO for $100. GR and invoice was done for $80. However the limits tab in PO shows actual value as $85!
Why this difference of $5? ($85 - $80)
Regards

Hi,
Is the value of EKBE-REFWR = RSEG-WRBTR for your PO and invoice? If yes, then what you are seeing is not an error. The values are correct.
The 'Actual value' in the PO displays the sum of the invoiced amount referred to the PO/item (EKBE-REFWR / EKBE-REFWR).
But the displayed 'Value in local curr' in the PO's history for each invoice's item (EKBE-WRBTR) is not the invoice item's amount, it includes the following 4 parts:
1. Invoice item's amount
2. Non-Deductible Input Tax(NVV)
3. unplanned Delivery costs
4. Cash discount amount
So the 'actual value' in the PO cannot be the same as the totoal invoiced value.
Regards,
Purnima.

Bridge CS3 Thumbnail filenames different from actual filenames

This is really weird query.
When I drag a selection of files into Bridge a small number of the filenames randomly appear with different and very abbreviated names (1or 2 characters) in the horizontal filmstrip i.e. 1.jpg, 2.jpg, A.jpg, AB.jpg.
Sometimes the changed filename seems to reflect the original file i.e. Bloggs_Joe_1234.jpg appears as BJ.jpg. The metadata of the files remain unaltered.
When I drag the abbreviated filename unto my desktop and rename it, it opens in the normal way displaying the full filename when I doubleclick it.
It opens in PS Elements displaying the correct name. The obvious difference is that I am by-passing Bridge.
The files concerned have been shot on a variety of cameras and processed originally on a variety of PC & MAC versions of Photoshop. I am presently using Elements 6 for the Mac. I am using OSX Version 10.5.6.
Thanks, in anticipation, for any suggestions as to where the problem lies.
Victor

Thank you for your unbelievably fast response. I am using Bridge CS3 which was supplied with Elements 6 for the Macintosh. I will also try the Photoshop Elements forum.
Regards
Victor

Marker Count in Timeline differs from actual quantity

I am adding Chapter Markers to a project and although there are twenty thus far, when pressing 'M' to add the next marker it shows a far greater amount. I.e., the next Marker I am adding will actually be number 21 but when pressing 'M' once it states "Marker 65". So forth and so on. Why is this?
Thanks.

It's the number of markers you've added in the project. If you delete markers the numbers are still added and continue to increment upward.

SPD 2010 Workflow "Collect Data From User" activity + Multi User selection

Creating a SPD 2010 workflow. Trying to do something that I think should be simple.
Use a “Collect Data From a User” activity to collect 0 to many “people” that should be affiliated with a piece of content (Discussion).
After the assigned user completes the task (and after ensuring that there have actually been people associated from the task) I want to take the “people” from the Task list item and move them over to a field on the core Discussion item,
that is also setup as a Person/Group field (allowing multiple).
I have tried using both the “Set Field in Current Item” and “Update List Item” activities to map the data over (pulling from the Task item) and in both cases tried using every combination of “Return field as”
values to do the mapping (i.e. ‘String’, ‘Display Names, Semicolon Delimited’, ‘User Ids, Semicolon Delimited’, etc). In some cases I get vague errors about not being able to do mapping (I get it), in others, it sets the
data, but only to the first user entered in the Task’s instance of the field.
After researching a bit, I find that the task from which I am pulling the data only contains one value, eventhough when I submitted the InfoPath form for the task, it accepted my data entry of two
different users. So I think somewhere between the data entry into the custom task's infopath form, and the update of the same data field in the Task list, the value is being lost.
I am sure this would be trivial with a custom activity, but we are exploring OOB ways of doing things and I have to imagine this is possible.
Am I missing something here? This seems “buggy”…
I am able to repro this in two different environments, using an out-of-box Discussion Board on an out-of-box Team Site. If it matters Claims Based Auth against Windows only...
TIA!
Brian McCullough

Hi brianpmccullough,
Collect Data from a user action can only use to collect data from one user, and if you need to collect data from one than one user, please use “Assign
a Form to a Group” instead, then it will create separate task for each user.
And if we need to update a user and group field which with multiple selections enabled, we can only use lookup field to get only the one user. And
to add multiple users to this field, we can only use String Builder, type the user account directly or get information from multiple fields.
Best regards
Emir Liu
TechNet Community Support

App launch date different from apperance date - help !

Hello
I have just searched and trawled through the forum and am unable to find a post regarding the launch date of an app being different from its actual appearance on the store.
My app launched yesterday 20th August but the date showing is the 14th August(date of submission) - hence it has not appeared in the new apps list - this is a little frustrating as it immediately receives no "free" publicity for a few hours whilst it is on the list of new applications.
Has anyone else experienced this yet? - as I seem to remember seing a post regarding tjis issue but cannot find it anymore. I have emailed the dev email and will await a reply but thought the collective knowledge of this forum may be able to help!
Regards
Steve

Steve, any update on your date situation? Did you hear from Apple? What was the final outcome?
I'm having a similar problem outlined in this thread http://discussions.apple.com/thread.jspa?messageID=8140542#8140542

Use Java to collect data from HTML

Hi Guys
I am doing a online stock trading project, the main part is to collect raw data from http://finance.yahoo.com User can retrieve the stock detail by inputting the right stock symbol, such as "AOL". I dont have too much problem in this part because yahoo provde a spreedsheet format to display the result. If you type the URL below, it can bring you a set of stock data separating by comma. So, I can use StringTokenizer(date, ",") to collect each data from yahoo into my system.
========================================================================
http://finance.yahoo.com/d/quotes.csv?f=sl1d1t1c1ohgv&e=.csv&s=AOL&
"AOL",15.57,"8/12/2003","4:01pm",+0.04,15.47,15.63,15.40,12097200
========================================================================
However beside this function, I also need to search Stock Symbol, because user may only know the company name. Although Yahoo finance also provide this function, with no spreedsheet format provided. So, if I type the URL below, it will only give me a set of result BUT in HTML format.
========================================================================
http://finance.yahoo.com/l?s=AOL&t=S&m=
========================================================================
So, can anyone tell me what is the best way to collect data from a HTML page? Or anyone know any good stock quoting sites which also provide spreedsheet format?
Thank you very much
Kel

I am doing a online stock trading project, the
the main part is to collect raw data from
http://finance.yahoo.com
Sounds fun.
So, can anyone tell me what is the best way to
to collect data from a HTML page? Or anyone know any
good stock quoting sites which also provide
spreedsheet format?I really don't know any other stock quote sites. But if you want to implement a search function for stock names, I would do it like this
1) Code the HTTP SUBMIT/POST to lookup the possible stock names
2) Use XSL to filter out the HTML path to the table with results, the layout is consistent, so there are no strange exceptions. You can check the DOM structure by using Mozilla's DOM inspector. Just write down the path to the TABLE element and select it, and transform it to CSV for example.
3) Reparse the CSV to fill some boxes
To possibly save some server load use a small fixed size in memory cache to store N requests based on some strategy.
The other part is actual a separate part of what you want to code and should be a separate class in which you can feed the stock name.
If the user types in a bad stock name, you can retrieve a list of possible names using the input as the company name.
Greets.
Maybe there is a SOAP service out there somewhere.

How can i control NI-6115 to collect data from 2 channels and save as 2 files?

I want to program NI-6115 card to collect data from 2 channels and save the two data into two different filenames that i specified?
How do i write in labview codes?

Calibur,
LabVIEW includes a number of examples that demonstrate how to acquire analog input data and write it to disk. Dependent upon the type of file you would like to use, I would suggest that you examine one of the following examples:
Cont Acq to File (binary).vi
Cont Acq to File (scaled).vi
Cont Acq to Spreadsheet File.vi
With regards to writing each channel's data to a separate file, you will need to use the Index Array function to generate two 1-D arrays, each containing data for one channel. These arrays can then be written to separate files using two Write File functions.
Good luck with your application.
Spencer S.

Collecting data from two R3 source systems

Dear All,
Scenario:
We are in the process of implementing SAP BI 7.0 in our organisation.
We have a single BI server (7.01) collecting data from two source
systems from two different divisions within the group.
The first system is of Company 1 where we have IS u2013 MILL (ECC 6.0).
BI has been implemented and running successfully in this unit. Now we
have started implementing BI in the second unit u2018Company 2u2019
where the industry specific solution IS u2013 AFS (ECC 6.0) is the source
system.
We are activating BI Standard Content for AFS. When we try to upload
master data, we face a problem.
The master data (0Division, 0Mat_Grp_3, etc.) is already loaded with
IS Mill data (data from the first source system). Now when the data is
loaded from IS AFS (second source system), wherever, the same key
exists in the info object, we notice that the existing data is
overwritten by the freshly loaded data, thus causing loss of existing
data.
A typical example is as follows:
BW Data u2013 Source system 1 u2013 (Before upload of data from source system
2):
0Division
99         EN          Stock Transfer Out
AFS Data (Source system 2) -
0Division
99         EN             STO
BW Data u2013 Source system 1 u2013 (After upload of data from source system 2):
After uploading the master data from AFS, the Values areu2026
0Division
99        EN            STO
The original data is lost.
Similar problem is noticed with other master data as well.
Please suggest the right methodology for upload of master data when
data to BW is sourced from two systems. How to retain the data in the
same Infoobject but at the same time maintain distinction between the
data from the two systems.
We donu2019t find any specific mention of such scenarios in the standard
documentation.
Will such a problem recur when we upload transactional data?
Regards,
Aslam Khan

Hi Aslam,
            Please use some compounding attribute for your master data object like Sourcesystem ID. While loading the master data from different source systems... you should have two different flows to fill the same master data object. In each flow you can specify the Source system ID as constant value ... eg SS1 (Source system 1) and SS2(Source system 2) in each of the data flows.   This should solve your issue without overwriting your master data
Thanks
Kishore

Collect data from User workflow error updating list item

Hi, can someone please help me with WSS 3 workflows?!
I'll keep it simple - I have a workflow step "Collect data from user" that will fail with Unknown Error when attempting to update list item (this is after the user has clicked Complete Task). The workflow does not continue past this step and I have
to terminate the workflow.
What is odd, is that if I do another Collect data from User in the same step but following the 1st collect, both will work!! How can this be?? This proves the 1st collect is OK so why won't it run without another Collect data after it?! Doesn't make sense to
me.
I was just trying the second Collect to troubleshoot the issue. I've tried other actions there but having another Collect does seem to be the action that kicks things into life. Is there a clue here?
Any clues would be much appreciated as I'm not able to turn much up when I Google.
Thanks

Well, surprise, surprise, this has come back (thought it might!). The trace logs show it's a task locked error but I can't see how. Can anyone please provide me with some clues??
03/14/2014 12:30:25.11    w3wp.exe (0x7698)                          0x5EA4   Windows SharePoint
Services     Web Controls                     88wy   Medium     SPDataSourceView.ExecuteSelect()
- selectArguments: IsEmpty=True, MaximumRows=0, RetrieveTotalRowCount=False, SortExpression=, StartRowIndex=0, TotalRowCount=-1
03/14/2014 12:30:28.39    w3wp.exe (0x7698)                          0x6C4C   Windows SharePoint Services
    Web Controls                     88wy   Medium     SPDataSourceView.ExecuteSelect() - selectArguments:
IsEmpty=True, MaximumRows=0, RetrieveTotalRowCount=False, SortExpression=, StartRowIndex=0, TotalRowCount=-1
03/14/2014 12:30:28.47    w3wp.exe (0x7698)                          0x6C4C   Windows SharePoint Services
    Web Controls                     88wy   Medium     SPDataSourceView.ExecuteSelect() - selectArguments:
IsEmpty=True, MaximumRows=0, RetrieveTotalRowCount=False, SortExpression=, StartRowIndex=0, TotalRowCount=-1
03/14/2014 12:30:29.86    w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          72er   Medium     Microsoft.SharePoint.SPException: This task is currently locked by a running workflow and cannot
be edited.     at Microsoft.SharePoint.SPListItem.PrepareItemForUpdate(Guid newGuidOnAdd, SPWeb web, Boolean bMigration, Boolean& bAdd, Boolean& bPublish, Object& objAttachmentNames, Object& objAttachmentContents, Int32&
parentFolderId)     at Microsoft.SharePoint.SPListItem.UpdateInternal(Boolean bSystem, Boolean bPreserveItemVersion, Guid newGuidOnAdd, Boolean bMigration, Boolean bPublish, Boolean bNoVersion, Boolean bCheckOut, Boolean bCheckin, Boolean
suppressAfterEvents)     at Microsoft.SharePoint.SPListItem.Update()     at Microsoft.SharePoint.Workflow.SPWinOEWSSService.CommitUpdateListItem(Transaction txn, Object[] transData)
03/14/2014 12:30:29.86    w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          72fe   High       Error in commiting pending workflow batch items: Microsoft.SharePoint.SPException: This
task is currently locked by a running workflow and cannot be edited.     at Microsoft.SharePoint.SPListItem.PrepareItemForUpdate(Guid newGuidOnAdd, SPWeb web, Boolean bMigration, Boolean& bAdd, Boolean& bPublish, Object& objAttachmentNames,
Object& objAttachmentContents, Int32& parentFolderId)     at Microsoft.SharePoint.SPListItem.UpdateInternal(Boolean bSystem, Boolean bPreserveItemVersion, Guid newGuidOnAdd, Boolean bMigration, Boolean bPublish, Boolean bNoVersion,
Boolean bCheckOut, Boolean bCheckin, Boolean suppressAfterEvents)     at Microsoft.SharePoint.SPListItem.Update()     at Microsoft.SharePoint.Workflow.SPWinOEWSSService.CommitUpdateListItem(Transaction txn, Object[]
transData)     at Micro...
03/14/2014 12:30:29.86*   w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          72fe   High       ...soft.SharePoint.Workflow.SPPendingWork.PerformWorkNow(Transaction txn)
at Microsoft.SharePoint.Workflow.SPPendingWorkBatch.Commit(Transaction transaction, ICollection items)
03/14/2014 12:30:30.05    w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          88xr   Unexpected   WinWF Internal Error, terminating workflow Id# 2dc6002d-9f9d-474f-84cf-329025347ec5
03/14/2014 12:30:30.05    w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          98d4   Unexpected   System.Workflow.Runtime.Hosting.PersistenceException: This task is currently locked by a running workflow
and cannot be edited. ---> Microsoft.SharePoint.SPException: This task is currently locked by a running workflow and cannot be edited.     at Microsoft.SharePoint.SPListItem.PrepareItemForUpdate(Guid newGuidOnAdd, SPWeb web, Boolean
bMigration, Boolean& bAdd, Boolean& bPublish, Object& objAttachmentNames, Object& objAttachmentContents, Int32& parentFolderId)     at Microsoft.SharePoint.SPListItem.UpdateInternal(Boolean bSystem, Boolean bPreserveItemVersion,
Guid newGuidOnAdd, Boolean bMigration, Boolean bPublish, Boolean bNoVersion, Boolean bCheckOut, Boolean bCheckin, Boolean suppressAfterEvents)     at Microsoft.SharePoint.SPListItem.Update()     at Microsoft.SharePoint.Workflow.SPWi...
03/14/2014 12:30:30.05*   w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          98d4   Unexpected   ...nOEWSSService.CommitUpdateListItem(Transaction txn, Object[] transData)     at
Microsoft.SharePoint.Workflow.SPPendingWork.PerformWorkNow(Transaction txn)     at Microsoft.SharePoint.Workflow.SPPendingWorkBatch.Commit(Transaction transaction, ICollection items)     at System.Workflow.Runtime.WorkBatch.PendingWorkCollection.Commit(Transaction
transaction)     at System.Workflow.Runtime.WorkBatch.Commit(Transaction transaction)     at System.Workflow.Runtime.Hosting.WorkflowCommitWorkBatchService.CommitWorkBatch(CommitWorkBatchCallback commitWorkBatchCallback)
at System.Workflow.Runtime.Hosting.DefaultWorkflowCommitWorkBatchService.CommitWorkBatch(CommitWorkBatchCallback commitWorkBatchCallback)     at System.Workflow.Runtime.WorkflowExecutor.CommitTransaction(Activity activityContext)
03/14/2014 12:30:30.05*   w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          98d4   Unexpected   ...   at System.Workflow.Runtime.WorkflowExecutor.Persist(Activity dynamicActivity, Boolean
unlock, Boolean needsCompensation)     --- End of inner exception stack trace ---     at System.Workflow.Runtime.WorkflowExecutor.Persist(Activity dynamicActivity, Boolean unlock, Boolean needsCompensation)
at System.Workflow.Runtime.WorkflowExecutor.System.Workflow.ComponentModel.IWorkflowCoreRuntime.PersistInstanceState(Activity activity)     at System.Workflow.ComponentModel.Activity.MarkClosed()     at System.Workflow.ComponentModel.Activity.ReleaseLockOnStatusChange(IActivityEventListener`1
eventListener)     at System.Workflow.ComponentModel.FaultAndCancellationHandlingFilter.SafeReleaseLockOnStatusChange(ActivityExecutionContext context)     at System.Workflow.ComponentModel.FaultAndCancella...
03/14/2014 12:30:30.05*   w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          98d4   Unexpected   ...tionHandlingFilter.OnEvent(Object sender, ActivityExecutionStatusChangedEventArgs e)
at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run()
03/14/2014 12:30:30.38    w3wp.exe (0x7698)                          0x6C9C   Windows SharePoint Services
    General                          0   Unexpected   ERROR: request not found
in the TrackedRequests. We might be creating and closing webs on different threads. ThreadId = 59, Free call stack =    at Microsoft.SharePoint.SPRequestManager.Release(SPRequest request)     at Microsoft.SharePoint.SPWeb.Invalidate()
at Microsoft.SharePoint.SPWeb.Close()     at Microsoft.SharePoint.SPSite.Close()     at Microsoft.SharePoint.SPSite.Dispose()     at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflow(SPWorkflow
workflow, Collection`1 events, SPRunWorkflowOptions runOptions)     at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflow(SPWorkflow workflow, Collection`1 events)     at Microsoft.SharePoint.Workflow.SPWinOEItemEventReceiver.RouteWorkflowEvent(SPItemEventProperties
properties, SPWeb web, SPListItem item, Boolean fNeedTas...
03/14/2014 12:30:30.38*   w3wp.exe (0x7698)                          0x6C9C   Windows SharePoint Services
    General                          0   Unexpected   ...kReset)
at Microsoft.SharePoint.Workflow.SPWinOEItemEventReceiver.ItemUpdated(SPItemEventProperties properties)     at Microsoft.SharePoint.SPEventManager.RunItemEventReceiver(SPItemEventReceiver receiver, SPItemEventProperties properties, SPEventContext
context, String receiverData)     at Microsoft.SharePoint.SPEventManager.RunItemEventReceiverHelper(Object receiver, Object properties, SPEventContext context, String receiverData)     at Microsoft.SharePoint.SPEventManager.<>c__DisplayClass8`1.<InvokeEventReceivers>b__0()
at Microsoft.SharePoint.SPSecurity.CodeToRunElevatedWrapper(Object state)     at Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param)     at Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken
03/14/2014 12:30:30.38*   w3wp.exe (0x7698)                          0x6C9C   Windows SharePoint Services
    General                          0   Unexpected   ...userToken, CodeToRunElevated
code)     at Microsoft.SharePoint.SPEventManager.InvokeEventReceivers[ReceiverType](SPUserToken userToken, RunEventReceiver runEventReceiver, Object receivers, Object properties, Boolean checkCancel)     at Microsoft.SharePoint.SPEventManager.InvokeEventReceivers[ReceiverType](Byte[]
userTokenBytes, RunEventReceiver runEventReceiver, Object receivers, Object properties, Boolean checkCancel)     at Microsoft.SharePoint.SPEventManager.HandleEventCallback[ReceiverType,PropertiesType](Object callbackData)
at Microsoft.SharePoint.Utilities.SPThreadPool.WaitCallbackWrapper(Object state)     at System.Threading.ExecutionContext.runTryCode(Object userData)     at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode
code, CleanupCo...
03/14/2014 12:30:30.38*   w3wp.exe (0x7698)                          0x6C9C   Windows SharePoint Services
    General                          0   Unexpected   ...de backoutCode, Object
userData)     at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)     at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback
tpWaitCallBack)     at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state) , Allocation call stack (if present) null

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

Production finish date differs from basic finish date in backward schedulin

Hi, experts.
When i do scheduling the planned order,
production finish date differs from basic finish date in backward scheduling as below.
Scheduling: Backward
Basic finish date : 2010.01.22
Basic start date : 2010.01.21
Production finish date : 2010.01.23 09:00:00
Production start date ; 2010.01.22 03:57:09
*GR time : 0.
*Scheduling Margin key : 0.
I don't know why production finish date set in 2010.01.23 09:00. ( Basic finish date +1 day)
Please reply me.
Thanks.

Dear Jong,
1) what is the parameter used in MRP run, Basic scheduling or lead time scheduling
2) you must find a exception Mssg for that plan order in MD04
3) basic scheduling take the time from material master & lead time scheduling will take time
from Routing
Regards
Madhu

Medical Collection date different from actual EOB date Central State Recovery

Similar Messages

Maybe you are looking for