Medium error: Power calibration error. (0x73, 0x03.)

Everytime I try to burn a DVD-R in iDVD v3.0.1, I always get the following;
Power calibration error. (0x73, 0x03.)
What does that error code mean?
Any resolution?
Thanks.

Hi
What brand of DVD ?
I only use Verbatim (Taiyo Yuden DVDs also supposed to be first class)
What type of DVD ?
I use only DVD-R
If You can - try to get an as slow burning versions x1 or x2 - x16 can be problematic
(alternative is to make a DiskImage of Your DVD project - standard in iDVD 5 and onwards.
In iDVD 4 You need to do a Hack and use a program named HPfurz, install it and follow instr.
Then when You have a working DiskImage - burn this at (x1 or) x4 with Apple Disk Util tool or
Roxio Toast™ if You got this.)
Else
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
Yours Bengt W

Similar Messages

Calibration area error 0x73, 0x03

Hello,
i'm trying to burn apple media dvd on my idvd project.
The burner is Pioneer DVR-104, and i get that massage:calibration area error 0x73, 0x03.

power calibration error means either your have a burner problem or you have poor media.
Apple media should be OK. What is the rated burn speed of the media you have?

Error message unknown device error (0x73, 0x03)

I created a project in FCP and prepared to burn it in DVD Studio Pro but when I tried to burn it I got this error message : unknown device error (0x73, 0x03). Does anyone have any brilliant ideas on how to burn this?

What speed disc are you using? That burner will only burn speeds up to 8x for DL. You might also try burning at the slowest possible speed.

Device Error (0x73,0x03.)

DVDSP failed to author my DVD giving me the "device error (0x73,0x03.)" message.
I have the Pioneer DVD-RW, DVR-112D.
Any suggestions?
Thanks,
mp

David,
Thanks for your post. I had a problem with a Data burn also. I got Error, sense code=0x21,0x02, buffer under-run.
I'm using Sony DVD-Rs which are burning fine on my laptop.
Does this sound like I need to bring the burner to the shop?
mp

Power calibration area error (0x73, 0x03.) ??? HELP!

At the beginning of iDVD writing the lead-in on a burn, I am encountering “errors were found during the burning process”.
The explanation is- “The recording device reported the media error: Power calibration area error. (0x73, 0x03.)”
Then I get a second window that reads- “MULTIPLEXER ERROR - There was a problem during multiplexing/burning.”
Can anyone answer this problem?

Hi Jeff
Power Calibration area error in iDVD
Try:
- Clening lens with a Cleaning CD/DVD
- Change brand of DVD disks to eg: Verbatim DVD-R (I use this with good result)
1. Make a disk image in iDVD then use this and
2. burn with Apple Disk util tool or if You have Roxio Toast™ AND
3. at an as slow speed as possibly eg: x1 or x2 or x4
or as Sue writes: Improve performances
iMovie: Tips to improve performance
http://docs.info.apple.com/article.html?artnum=93699
Yours Bengt W

Power calibration area error (0x73,0x03) when I attempt to burn DVD

I have a Pioneer DVD-RW DVR-106D burner in G% PowerMac purchased in December 2004. It will burn CD's using Toast but it won't even complete asset encoding when attempting to burn DVD's using either DVD Studio Pro or iDVD. Anyone ever seen this error message before? If so, what did you do to fix the problem?
Thanks for whatever help you can give,
Roger Legel

yes, I got this error about a year ago, and so I was told to change the media that you use to burn. I was using RiDATA DVD-R's, and they worked for a year or so, then they stopped working and I would get the error, so I changed over to a different DVD-R, I believe Tyundens, unsure though, and they worked for about a year, and now they no longer work anymore, and I am getting issues with them. They work when I burn small 5 minute projects, but anything larger than that, it gives me the error.
SO my question is this? Do I have to keep on changing on what DVD-R's I use every year because the DVD burner is that picky????
I need the problem to be fixed as well!!!

IDVD power calibration error?

Hello everyone. For the past few days I have been trying to burn a dvd from iDVD, however, when it seems to almost finish an error message pops up. ( Error, power calibration error 0x73, 0x03). Can anybody help me?

Hi FilmStudent:
Welcome to discussions!
I think that this is an issue related to the DVD media. Basically, your burner doesn't like whatever brand of discs you've just brought and so you get that weird error message.
May I suggest Verbatim DVD-R 8x or less? (4x if you can find them).
:)Sue

Error Code When Burning (Power calibration area error. (0x73, 0x03.)

I've been searching for answers to my problem and it seems like this problem has randomly popped up for many others like it has for me.
A month ago I randomly started getting this error code Power calibration area error. (0x73, 0x03.) when I tried to burn dvds in DVD Studio Pro. When I try to burn a DVD just from the finder options I get this error Code (Error code 0x8002006D)
But CD's burn fine for me.
I have been using the exact same discs that were able to burn before. They are 16x speed Memorex.
I tried relaunching the finder. I bought a Disc Cleaner today and i bought some 8x speed DVD's. I cleaned the Burner and I was able to successfully burn a 8x cd but still not the 16x.
Does anyone know the cause of this error code? Why would it just randomly happen?

Hi:
Check this thread:
http://discussions.apple.com/thread.jspa?threadID=1054119
You can use this link ** Media Brand vs. Manufatrurer Brand ** to learn about your media quality.
Hope that helps !
Alberto

Stage 4 Multiplexing - Media error in Power calibration 0x73,0x03

Try to burn a DVD the project I made. Everything is fine until it goes to stage 4 Multiplexing & Burning - the system shows a Media Error in the Power Calibration 0x73,0x03 when this come up it will eject the dvd. I never had a problem like this. System always worked fine. Any help on this? Thank you, John

Hi
As I remember it - it used to be when using Cheap Brands of DVDs e.g. Memorex or NoName ec.
Else
Multiplexing Error
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Power calibration area error. (0x73, 0x03.) for my DVD burner

My dvd drive was working just fine then the other day I went to burn a dvd using idvd studio pro (like I always do) and it started burning, then about 2 minutes into the burn I got an error message stating that the burn failed due to a "Power calibration area error. (0x73, 0x03.)" then th disk just spit out of the drive. I dont know what this is or how to fix it. can anyone help??

Welcome to the discussions!
Usually this pops up when your drive does not like the disk itself. Try either a different blank or a different brand disk.
I use only TDK and Fuji disks and I have never received that error and never burned a bad disk either.

2008 Mac Pro burner failure - report "Sense Key = MEDIUM ERROR - Sense Code = 0x73, 0x03"

Problem just arose - burners working days ago - NO major changes in Mac Pro --- Attempting to burn some DVDs (data only), using the latest version of Toast v12.0 & Dragon Burn, as soon as I tell either my internal or external unit to burn, it runs a few minutes then pops up dialog box - "Sense Key = MEDIUM ERROR - Sense Code = 0x73, 0x03". Blanks are new Memorex. I've restarted Mac Pro multiple times, still no burning possible. In dire need to restore capability. Most gracious thanks for ANY immediate assistance.

There are several different incompatible media sold as writeable CDs. You MUST match the media to the abilities of your drive.
I was flummoxed by buying 8x media when my drive was a 2x drive. I needed the other type, and there was nothing helpful in the diagnostics or the packaging that helped me understand that.
EDIT: There is an interesting helpful feature buried in System Profiler ... (read the last two lines of the report):
About this Mac > ( More Info ) > Report > Disc burning

When trying to Burn a DVD I get the following error: 'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03' Please advise

when trying to Burn a DVD I get the following error:
'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03'
Please advise

this reccommendation is to OS 10.5.8 only
Go to the hard drive find the following folders and look for the following file, com.apple.finder.Plist, delete it and restart the computer. Its found under the following folder Users-account name-library-prefrences. This helped resolve my issue for now.

When i try to write an image in dvd my drive show me an error as...sense key=medium error, sense code=0x73, 0x03. Can help me anyone?

when i try to write an image in dvd my drive show me an error as...sense key=medium error, sense code=0x73, 0x03. Can help me anyone?
Mac Pro, OS X Mountain Lion (10.8.3), EARLY 2008 MACPRO3,1

Try another blank DVD or another brand of DVD.

Disc recording log; Finder: Write (10), block: 4294967146, count: 32 - 3/73/03 Medium Error, Power calibration area error, Burn failed

Hello All Apple Heads (Brit. short for headmaster or headmistress.)!
My MATSHITA DVD-R UJ-846
(Firmware Revision: FQ3T, ATAPI, Burn Support: Yes [Apple Shipping Drive], Cache: 2048 KB, Reads DVD: Yes, CD-Write: -R, -RW, DVD Write:-R, -RW, +R, +R DL, +RW, Write Strategies: CD-TAO, CD-SAO, DVD-DAO), optical super drive is unable to burn on any CD or DVD.
The Disc Recording log list below writes: "Finder: Write (10), block: 4294967146, count: 32 -> 3/73/03 Medium Error, Power calibration area error, Burn failed".
DiscRecording.log:
Description:          Disc recording log
Size:          2 KB
Last Modified:          11-09-15 4:50 PM
Location: /Users/-/Library/Logs/DiscRecording.log
Recent Contents:          Finder: Burn started, Thu Sep 15 16:40:47 2011
Finder: Burning to CD-R media with SAO strategy in MATSHITA DVD-R   UJ-846 FQ3T via ATAPI.
Finder: Requested burn speed was max, actual burn speed is 24x.
Finder: Burn underrun protection is supported, and enabled.
Finder: Write (10), block: 4294967146, count: 32 -> 3/73/03 Medium Error, Power calibration area error
Finder: Burn failed, Thu Sep 15 16:41:57 2011
Finder: Burn sense: 3/73/03 Medium Error, Power calibration area error
Finder: Burn error: 0x8002006D The disc can't be burned; it might be incompatible with this disc drive. Please try a different brand of disc, or try burning at a slower speed.
Finder: Burn started, Thu Sep 15 16:43:37 2011
Finder: Burning to CD-R media with SAO strategy in MATSHITA DVD-R   UJ-846 FQ3T via ATAPI.
Finder: Requested burn speed was 8x, actual burn speed is 8x.
Finder: Burn underrun protection is supported, and enabled.
Finder: Burn finished, Thu Sep 15 16:49:31 2011
Finder: Verify started, Thu Sep 15 16:49:31 2011
Finder: Verify failed, Thu Sep 15 16:50:20 2011
Finder: Verify sense: 3/02/00 Medium Error, No seek complete
Finder: Verify error: 0x80020063 Verifying the burned data failed.
Can this issue be solved by means of firmware/updates, terminal command lines, or through other open source OS?
Is this issue related to lense cleanliness?
Much thanks!
Sam
Message was edited by: saltislandsam

I have also tried TDK, Maxell, Verbatim and Sony media
Me too. Out of that list the only brand that has NEVER produced a coaster (on the same burner as yours) is Verbatim DVD-R and Fuji DVD-R. All the others produced a 25-50% failure rate.
Have you tried burning at a slower speed?
Using 16x DVD media is fine - in fact it is difficult to buy any other - but there is a consensus in the Apple Support Forums that a slower burn is a better burn i.e. 2x or 4x (slow burns are better burns!). I always use Toast for burning.
The term "Best" means the fastest speed that the drive told Toast it can write to a specific disc. The drive's firmware and info on the disc decide what speed burns are available. When you press the speed setting button in Toast (after inserting a disc) you'll likely see some speeds in italics and some in bold face. The ones in bold face are supported by that media on that drive. The fastest one is what Toast calls Best.
Audio CDs in particular should be burned at the lowest supported speed.
Verification is a good indicator the disc is burned okay. However, other DVD players can still have problems with the disc. Media problems with various drives is not uncommon. Slower burning may reduce the chance of those problems, and is one of the reasons why RW (read/write) media is always rated slower than DVD-R.
There are some interesting facts here:
http://www.osta.org/technology/dvdqa/dvdqa4.htm and here:
http://www.osta.org/technology/dvdqa/dvdqa4.htm
But many will tell you that the 'slower burn is best' theory is outdated. Who really knows? At the end of the day, if your home-made DVD was verified by Toast and will play anywhere on anybody's DVD player, then that is the result we are all after!

DVD Burning Error: Unknown device error. (0x73, 0x03.)

I have been trying to burn a home movie using iDVD. I transferred the media successfully to my computer, followed all the steps, and was finally ready to burn the DVD. After waiting almost an hour through the burn process, it spit the DVD back out of my Macbook Pro and gave me the following message.
*Errors were found during the burning process:*
*The recording device reported the media error: Unknown device error. (0x73, 0x03.)*
I don't really know what this means. Was the media corrupt? Or is there a problem with my DVD player? I have supplied my DVD and computer information below. I would appreciate all the help I can get. Thank you in advance!
Courtney
*MATSHITA DVD-R UJ-857D:*
Firmware Revision: KCVB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds
*Hardware Overview:*
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version (system): 1.12f5

Using the same media I've used for years (Verbatim 4x InkJet printable) and all of a sudden can't burn from the internal drive. I do have an external burner (7 disc standalone replicator with USB/FireWire 400) and hooked that up and burned to a disc from the same spindle with no problem, and then made a 3x replicate with the same media. So it's looking like my MacBook Pro's drive is failing?
Laptop is plugged in and fully charged.
DVD Studio Pro: Burn started, Fri Oct 23 22:42:55 2009
DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
DVD Studio Pro: Burn underrun protection is supported, and enabled.
DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
DVD Studio Pro: Burn failed, Fri Oct 23 22:44:13 2009
DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
DVD Studio Pro: Burn started, Fri Oct 23 22:55:50 2009
DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
DVD Studio Pro: Burn underrun protection is supported, and enabled.
DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
DVD Studio Pro: Burn failed, Fri Oct 23 22:57:08 2009
DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.

Medium error: Power calibration error. (0x73, 0x03.)

Similar Messages

Maybe you are looking for