Medium Resolution the default for Press Ready PDF?

After creating a document in ID3, and exporting to a Press Ready PDF, it automatically says, under the Advanced tab that the
Transparency flattener has set the preset resolution to "Medium". If all of the images are at high quality and 300 ppi why would this say "medium"?
Thanks.
Gordon

Soooo, worked on this with my printer and this is what we came up with. He sampled the different Images (on one doc) and some came in at 230 dpi. some 600. so we have concluded that Pages will do a good job as for keeping the res. You just have to make sure; for example the 230 was a 300 5x7ish then I resized in the Mask to go up width 2 inches and of course lost the res.- so of course i must go back to the source and make my adjustment say in photoshop. WORK FLOW- i have decided to just layout> then go back as needed ( just the enlarged image). CMYK- the printer said DON"T take it out to photoshop to convert to CMYK ( as they can do it easy enough) and you risk sharpness in the font.
So that was a fun day of research!

Similar Messages

How can I change the default for reading a pdf?

I accidentally set it to "notepad" so a bunch of code comes up instead of the pdf. How can I change the default? I'm using Firefox ESR 17.0.10. Thanks.

Hello,
# 1. go to the file that you want to fix
# 2. right click it
# 3. open with..
# 4. choose default then Adobe reader

What is the default for the "Display PDF in Browser" setting?

What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
Also, are any statistics available on what proportion of users have this setting set to on?

For all three the default is "checked".
Be well...

HT2506 how do you set Preview as the default for opening pdf in browser?

How do I set the Preview application to be the default for viewing PDF's in while in Safari? Previously, while in Safari and clicking on links to PDF's, they would display with buttons on the bottom that made it simple to view and download the PDF. Since updating Adobe Reader it seems Reader is now the default application for viewing PDF's accessed from the internet. I haven't been able to figure out how to revert back to Preview.....

I did this and now Safari won't open the form at all.
I put the files back and it opens in Adobe.
When I save the files to desktop they open in Preview. But I am trying to read pdf's(? forms) while in Safari.
Adobe does not work smoothly in Safari and scrolling to read is a nightmare.
OS X 10.8.5
This problem came up within the last few months.
Before everything opened in Preview perfectly.

Making Adobe 7.0.5 the default for .pdf files

I was advised that the way to get Adobe 7.0.5 to be the default, instead of 5.0, was to delete the Adobe applications & files in my system, library, and user folders, including the 7.0.5 app. itself. Then, after everything relating to Adobe is gone, I should re-install 7.0.5 and it would become the default.
I also heard that Spotlight won't find every Adobe component or extention, so I'd have to do a detailed search and delete each one that way.
Does this sound right?
Can't I just delete the 5.0 folder in the Applications (Mac OS 9) folder and have everthing associated with 5.0 gone? Isn't that the beauty of having a Mac?
Thanks,
Greg
PowerBook G4 15" Mac OS X (10.4.2) 1.5 GHz, 1.5 GB RAM

Hi Greg
You were poorly advised. Deleting Adobe apps is a headache and completely irrelevant when it comes to making an app the default for a file type.
Control-click a .pdf file, choose Get Info. In the Info window click the Open With drop down list, choose the app you want, and then click Change All underneath it.
That should do it. You might find that there is more than one type of .pdf file and you might need to perform this action again at some time, but this should do the job.
And yes, you can just delete the Acrobat Reader 5.0 folder.
Matthew Whiting

InDesign generated 'Press Ready' PDF files

I have always prepared images (300dpi resize & CMYK conversion) in Photoshop and imported them into Indesign. Is this even necessary now? Does a 'Press Ready' PDF generated from InDesign do all of this? I understand that if an image is low res to start with then it's never going to be good - but if the image is high res (say 5000px x 3500px) and imported into a 5cm x 10cm image box - and only displaying at say 7% size will the PDF export have a 300dpi file at 1:1 final print size. I'd actually like to keep all images in RGB for all purpose use and avoid doubling up on disc space.

Whatever you say 300dpi is an industry standard resolution for platemaking
The problems with getting caught up with 300ppi as a magic number can go both ways.
This image which is a combination of line art and color would benefit from more than 300ppi (if you care about the 6pt. captions and fine keyline):
This image has no details or high contrast edges that would need 300ppi to resolve:
300 is a useful catchall but doesn't guarantee anything.

I need to know the pricing for Team Ready for 10+ users.

I need to know the pricing for Team Ready for 10+ users.

http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativesuite/compa nies/pdfs/CCTR-offer-overview.pdf
How to get the Creative Cloud Team Ready offer
This offer is available worldwide through reseller partners under the Adobe Transactional Licensing
Program (TLP). It is not available directly from Adobe. There is no minimum purchase or limit to the
number of memberships you can buy.
http://partners.adobe.com/resellerfinder/na/reseller.jsp

How do I change which application is the (default) for a given file type?

For .pdf files, I have set the application behaviour to "Always Ask", because sometimes I want to open the pdf, sometimes I want to save it. So far so good.
Now, when I want to open the .pdf, I have added an application to the dropdown list, so now I have "Adobe Reader 9 (default)" and "okular".
The problem is this: I *never* open using Adobe Reader. I always want to use okular, but Adobe Reader always appears first on the list, as it is the 'default'. This means I always have to click on the dropdown and select "okular", i.e. an extra step every time I want to open a pdf.
How do I change which application is the default?

Yes, I know that. That was the first sentence of my question, but it is not the problem I have.
I want to change which application is the (default) for a given file type, and this cannot be done from the settings.

How do I set photoshop CC as the default for Bridge CC?

How do I set photohsopCC as the default for Bridge CC?

Command i or File > Get info on a selected pdf in finder.
In the resulting window set open with AcrobatPro > Then set all like this to Acrobat pro..

Is there any way to set the default for *.doc document so that Pages opens them automatically?

I have a number of Ms Word documents because I used to have Word for Mac before the last OS release. Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
Now Pages will open these files. Is there any way to change the default for *.doc files so that a double-click will open them in Pages?
(Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
Walt

The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

Unable to make Acrobat X the default handler/opener of PDF files on a Windows 8 laptop with Acrobat Reader also installed.

I have a user with a Windows 8 Sony Vaio laptop with Microsoft Office 2013 Professional, Acrobat X Standard, and Acrobat Reader installed. Another program on his system requires Acrobat Reader so we cannot just remove that and keep it off the system. Regardless of what he does to set the default program to open PDF files with, when he opens a PDF file it always opens it in Acrobat Reader and not Acrobat itself. We have re-associated it and set the default program handling repeatedly and have also tried complete uninstall and reinstall of both Acrobat and Acrobat Reader which had no effect on this. At this point I am of the opinion that this is a bug and the file association is being overridden somewhere in the registry besides the file association entries. Any help is appreciated.

The only supported way to set the default handler (besides the Wizard and cmd line properties) is via the UI at Edit > Preferences > General > Default PDF Handler. The installer has to be invoked and many registry entries get touched during the switching process.
You should also verify your dot versions of the product support Windows 8: Overview — Acrobat and Adobe Reader Release Notes.
Finally, while you Acrobat 10 should work with Reader 11, try reverting to Reader 10 (that should be your last resort).
Ben

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

scottypet
For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
on the properties of the first drag to the Timeline.
To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
Then you import your source media, using the appropriate Add Media choice.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
Please let me know if you have any further questions on this or need clarification.
Thank you.
ATR

I want to schedule my back ups to my Western Digital Elements HDD so that it doesn't interfere with my Skype calls with clients. Operating system - version 10.7.4. The default for Time Machine is to back up every 1 hour. I'd like daily at 3am. Any ideas?

I want to schedule my back ups to my Western Digital Elements HDD so that it doesn't interfere with my Skype calls with clients. Operating system - version 10.7.4. The default for Time Machine is to back up every 1 hour. I'd like daily at 3am. Any ideas?

Time Machine Editor.
Clinton

Setting Photoshop CS5 as the default for opening all photo files?

How do I make Photoshop CS5 the default for opening all photo files?

Close the jpeg in Photoshop! This procedure is done on an unopened (closed) file in the finder, Photoshop is not involved.
Open a FINDER window, click ONCE to select your file (NOT double click to open it)
Command I or in the Finder, File menu, select Get Info.
In the GET INFO window, change the Open With item to Photoshop
Click the CHANGE ALL button, You will get the warning "This change will apply to all Adobe Photoshop CS5.app documents with extension “.jpg”.
Click CONTINUE and from now on all jpegs double clicked in the finder will automatically open in Photoshop

Medium Resolution the default for Press Ready PDF?

Similar Messages

Maybe you are looking for