Medscape log in problem. Help needed quickly!

I sideloaded the medscape application in my Playbook but upon loging in with username and password, it is saying that internet connection was interrupted. Though I can browse internet. It used to work earlier. Please sort this out asap.
Thanks.

KM
It is a known issue. Check the insider hub for all of the know issues
Some people might hit an issue where the username and password boxes do not appear or don’t accept input when logging in, which will prevent them from logging in. Possible workarounds include clicking the “Switch User” button, using Ctrl+Alt+Del,
or pressing the power button on your PC to sleep/resume and try again.
Wanikiya and Dyami--Team Zigzag

Similar Messages

Help needed quick with AGP problems

i bought a Radeon 9600 256MB vidcard from Sapphire today, and when i tried it in my K7N2 Delta ILSR, the system would boot, load windows, hang, then refuse to boot unless i removed the radeon ... since i dont have any onboard video, i've been using an Nvidia Vanta before the radeon, any ideas what the prob might be?
help would be very much appreciated

Quote
Originally posted by skzillz
where can i find the list of recommended memory modules for the Delta ILSR?
and what are some of the recommended PSU's also plz
thanks for ur help btw, i had solved the problem by moving the memory from one slot to another, does this give u any idea about any underlying problem with the motherboard??
I've already given you the top 2 PSU choices, and Bonz has linked you to his sticky on RAM choices. Please read what's been given to you already. As far as RAM I would recommend a good quality Mushkin or Corsair. Run this to test your memory Memtest
Good Luck
Bob

( jrew.exe encounterd problem,help needed )

MY DEARS
I AM FACING A PROBLEM ON MY P4 LAPTOP AND DESKTOP COMPUTOR ON A PRGRAMM ON SURGERY CD ,WHICH ON START UP DIPLAYS MESSAGE ( jrew encountered a problem,needs to close-)
WHAT IS THE SOLUTION .HELP IS APPERECIATED.
MANY REGARDS FOR HELPER.
DR QAMAR

Hi Jamie,
The install log looks fine, but the last entry was September 9th. I suspect the crash is occuring before the new log entries can be made.
Could you please open a new bug report on this over at bugbase.adobe.com? We'll want to get a crash dump so we can try to figure out what might be causing this to happen. You didn't mention what OS you were running, but I found this tech doc on the net that describes how do generate the .dmp file:
Creating Dr. Watson crash dumps
Thanks,
Chris

Multiple problems - help needed please

I've got so many problems that I've completely confused myself. So, if anyone can help….
I was previously using a D-Link D-320T DSL modem on BT Broadband in the UK. The modem was set up in bridge mode, and hooked up via ethernet to my Airport Extreme (n). The AEBS would use PPPoE and successfully connected to the internet, as well as handling all my network needs.
Everything worked and everything was fine, allowing screen sharing and file sharing between my Mac Mini, MacBook and MacBook Pro.
Earlier this week, the internet connection dropped and I couldn't find the cause. Resetting the router and hooking it up directly to my Mac Mini, I connected to it (192.168.1.1) and had it connect to the internet itself.
It did so, and distributed IP addresses to the Mac Mini…but after 30 seconds my internet connection dropped, and looking in network preferences, I found that the modem had jumped from a router address of 192.168.1.1, to an 82.xx.xx.xx address, which was clearly the public IP address forwarded by my ISP. So it seemed like it was working in a sort of bridge mode still.
I reset the router numerous times, tried switching it into full bridge mode etc, but the AEBS was unable to use it to connect via PPPoE as before, because the D-Link would play nice for 30 seconds, then jump around with addresses.
Very strange, but I assumed the modem was just broken.
I dug out my spare router, being the Netgear DG632.
I managed to get this hooked up to the internet really quickly, and using an ethernet connection to the Mac Mini, it all appeared fine. However, as I started looking around the internet, I noticed that although google.com would open up, any subsequent links, and indeed any other domains I tried to visit would not open.
Resetting the router seemed to solve this.
I then hooked up my AEBS to the Netgear and, after pondering which way to use it, I found the only way I could get it to play nice was to have the AEBS in bridge mode itself, meaning that the Netgear would do all the routing work.
The MacBook connected to the airport, and all seemed okay….
…However, I then noticed that the internet connection would randomly drop. Web pages would not open (in any browser), and downloads which were under way could be seen in the Safari download manager to suddenly crash.
The same was true on the Mac Mini - web browsing stopped at random. I had however hooked this up to the airport via an ethernet cable, I noticed that, although the "internet" wasn't working, other connections like torrents were still active.
Reconnecting the Netgear router directly to the Mac Mini allowed me to see in its diagnostics that it still held a connection to the ISP and still had an external IP address.
Again, a reset of the router seemed to resolve things….but only for a few hours. And whilst the Mac Mini seemed resilient, the airport connection to the MacBook was terrible. (I haven't even tried using the MBP yet).
Furthermore, I noticed that networking between devices had severely been crippled. Although the Mac Mini and MacBook were visible to each other in the shared devices section of finder, clicking the link meant waiting literally four minutes for a connection to establish, and screen sharing timed out, from either direction.
I then tried assigning everything static IP addresses, but this seemed to confuse matters with the router.
Under the impression that the Netgear clearly couldn't handle the job of routing my network, I tried to set it up in bridge mode and use the AEBS as before.
Reading around the internet (on my iPhone at this stage), I realised there was no obvious "bridge mode" option, but I was told to set the device mode as router, and then say "no" when it asks if there are any login details for the ISP (under Basic Router Settings). This was done.
However, setting up the AEBS with PPPoE had no success, and the connection was never made.
At this stage, I'm living with a crippled network and two routers, neither of which do what I want.
Can anybody advise me on a solution to fix either router/modem?
I want to use the modem in bridge mode and have the AEBS handle everything as before, as it was perfect.
At this stage, which a frazzled brain (after messing with everything for several hours), something step-by-step would be great.
Help! (and thanks)

I have also recently developed problems with my airport network. I was playing my air tunes when it started freezing so i reset my airport extreme and expresses. When I tried to setup my networks again I en counted problems like airport utility couldn't find the extreme base station or when it did it couldn't read the setting. I eventually managed to create a network then when i tried to connect to the network it either asks for the password (even though its saved in keychain) When I enter the password it keeps saying "connection time out". I then turn airpot off & on and it the sometimes reconnects automatically without requiring a password.
My internet then will sometime start working again but then drop out completely or take an age to load.
The network will then sometimes disappear from the network list and I'm unable to see it at all.
No matter how many time i reset the base station it doesn't make a difference.
I my broadband modem is also a wireless router and Im experiencing similar problems with that. I took my laptop to work and tried to connect to the network at work and it seems to work ok except it did ask for a password the time out but did it only once.
I did download a security update recently but im not sure if its that that is causing it
please help me as well as I'm stuck without my network

Loops messed up. Help needed quickly

Hi there,
I'm in the middle of kind of an important project that has to be finished by next week and of course those are the times when software seems to fail So I need help quickly.
Situation: the location of my apple loops seems to be messed up. I placed the "Apple Loops for Soundtrack Pro" on an external disk (since it is the largest folder) and kept the rest on my internal drive. Now, when I search my loop browser, results seem to be incomplete. I know I had a lot more drum loops before I reorganized my loops than I have now.
So I became suspicious and as some kind of test I looked in the Library > Audio > Apple Loops > Jam Pack Symphony Orchestra folder, searched for a particular loop name (in this case "Adversary Strings"), typed it in the search menu of the loop browser in Logic and couldn't find it.
So I took al my loop folders in the "Apple Loops" map and dragged them back into Logic. It showed "Adding Loops" and after 10 seconds (which seemed rather short to me) this was done. I searched again "Adversary Strings" in the loop browers, still couldn't find it. So I dragged ONLY the "Adversary Strings" loop in the Logic Pro loop browser and then Logic gave me a message: "Logic already has this loop, do you want to replace it?"
But Logic doesn't have that loop! I can't find it, there's no filter on in my loop browser (I search "all loops") and I don't find some loops (it's not only the case with the "Adversary Strings") and when I want to add them I get the message that they're already in Logic...
So I deleted all my loop indexes, re-added the loops and still no results.
Any ideas out there to re-index these things correctly???
Thanks!

Hi,
thanks for the help, but as I said in my topic, I already followed the steps suggested in "Rebuilding the Loop index" (deleting my index and dragging the apple loops folder back in the browser) and of course I already searched the forum. My question was a little more specific, so I thought it deserved a new thread.
Eventually I solved it in a very strange manner, just by trial and error actually. When I added the whole loop folder, Logic couldn't find the loops (despite deleting the index and hoping for Logic to re-index the loops). But when I selected one loop out of a particular folder (for instance Jam Pack1) and added it, Logic added the loop, but this seemed to take a while. After that one loop was loaded, suddenly all the others that were in the same folder (Jam Pack1) were also visible again.
I did this for every different loop folder (5 jam packs, garage band, soundtrack pro and I life) and so got back all my loops...
Weird, but it worked
Thanks anyhow...
S.

K430 Bad streaming problem - help needed

Hello everyone,
I wonder if any of you can help me or have had a similar problem.
I bought a Lenovo Ideacentre K430 Desktop PC (Intel Core i7 3770 3.4GHz Processor, 16GB RAM, 2TB HDD, DVD, LAN, WLAN, Nvidia Graphics, Windows 8) two months ago via Amazon and on the whole have been very pleased with it.
However I have had a major problem when it comes to streaming video. For example, when watching TV programmes via BBC iPlayer it will stop after about 45 secs and say that there is insufficient bandwith. Yet, when I run the BBC diagnostic it says the streaming speed is 3621 kbps and is sufficient. (I have two laptops in the house and both of these stream video without any problems). I also have the same problem when streaming video from other websites. When using websites generally they seem to load quickly and also when downloading items it seems to do these jobs at a good speed: it is just when streaming it seems to have a problem and stops.
I have even switched the K430 desktop to an ethernet cable to see if that helps - but the problem still persists. All the other devices in the house, i.e. iPhone, Wii, laptop all stream via the wi-fi without any problems.
I'm not that technical , so any advice and suggestions would be greatly appreciated.
many thanks,
Matt

hi Pikemonster,
Welcome to the Forums.
Just to verify, do you get the same issue if you stream via flash player using i.E., Chrome, or Firefox?
http://www.bbc.co.uk/iplayer/tv
Also, have you tried to adjust the video quality (i.e. medium, low, etcl)
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Linked lists problem -- help needed

Hello again. I've got yet another problem in my C++ course that stems from my use of a Mac instead of Windows. I'm going to install Parallels so I can get Windows on my MacBook and install Visual Studio this week so that I don't have to deal with these discrepancies anymore, but in the meanwhile, I'm having a problem here that I don't know how to resolve. To be clear, I've spent a lot of time trying to work this out myself, so I'm not just throwing this up here to have you guys do the work for me -- I'm really stuck here, and am coming here as a last resort, so I'll be very, very appreciative for any help that anyone can offer.
In my C++ course, we are on a chapter about linked lists, and the professor has given us a template to make the linked lists work. It comes in three files (a header, a source file, and a main source file). I've made some adjustments -- the original files the professor provided brought up 36 errors and a handful of warnings, but I altered the #include directives and got it down to 2 errors. The problematic part of the code (the part that contains the two errors) is in one of the function definitions, print_list(), in the source file. That function definition is shown below, and I've marked the two statements that have the errors using comments that say exactly what the errors say in my Xcode window under those two statements. If you want to see the entire template, I've pasted the full code from all three files at the bottom of this post, but for now, here is the function definition (in the source file) that contains the part of the code with the errors:
void LinkedList::printlist( )
// good for only a few nodes in a list
if(isEmpty() == 1)
cout << "No nodes to display" << endl;
return;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->name; } cout << endl; // error: 'setw' was not declared in this scope
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->test_grade; } cout << endl; // error: 'setw' was not declared in this scope
As you can see, the problem is with the two statements that contain the 'setw' function. Can anyone help me figure out how to get this template working and get by these two errors? I don't know enough about linked lists to know what I can and can't mess with here to get it working. The professor recommended that I try using 'printf' instead of 'cout' for those two statements, but I don't know how to achieve the same effect (how to do whatever 'setw' does) using 'printf'. Can anyone please help me get this template working? Thank you very, very much.
For reference, here is the full code from all three files that make up the template:
linkedlist.h (header file):
#ifndef LINKED_LINKED_H
#define LINKED_LINKED_H
struct NODE
string name;
int test_grade;
NODE * link;
class Linked_List
public:
Linked_List();
void insert(string n, int score);
void remove(string target);
void print_list();
private:
bool isEmpty();
NODE *FRONT_ptr, *REAR_ptr, *CURSOR, *INSERT, *PREVIOUS_ptr;
#endif
linkedlist.cpp (source file):
#include <iostream>
using namespace std;
#include "linkedlist.h"
LinkedList::LinkedList()
FRONT_ptr = NULL;
REAR_ptr = NULL;
PREVIOUS_ptr = NULL;
CURSOR = NULL;
void Linked_List::insert(string n, int score)
INSERT = new NODE;
if(isEmpty()) // first item in List
// collect information into INSERT NODE
INSERT-> name = n;
// must use strcpy to assign strings
INSERT -> test_grade = score;
INSERT -> link = NULL;
FRONT_ptr = INSERT;
REAR_ptr = INSERT;
else // else what?? When would this happen??
// collect information into INSERT NODE
INSERT-> name = n; // must use strcpy to assign strings
INSERT -> test_grade = score;
REAR_ptr -> link = INSERT;
INSERT -> link = NULL;
REAR_ptr = INSERT;
void LinkedList::printlist( )
// good for only a few nodes in a list
if(isEmpty() == 1)
cout << "No nodes to display" << endl;
return;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->name; } cout << endl; // error: 'setw' was not declared in this scope
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->test_grade; } cout << endl; // error: 'setw' was not declared in this scope
void Linked_List::remove(string target)
// 3 possible places that NODES can be removed from in the Linked List
// FRONT
// MIDDLE
// REAR
// all 3 condition need to be covered and coded
// use Trasversing to find TARGET
PREVIOUS_ptr = NULL;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
if(CURSOR->name == target) // match
{ break; } // function will still continue, CURSOR will
// mark NODE to be removed
else
{ PREVIOUS_ptr = CURSOR; } // PREVIOUS marks what NODE CURSOR is marking
// JUST before CURSOR is about to move to the next NODE
if(CURSOR == NULL) // never found a match
{ return; }
else
// check each condition FRONT, REAR and MIDDLE
if(CURSOR == FRONT_ptr)
// TARGET node was the first in the list
FRONT_ptr = FRONT_ptr -> link; // moves FRONT_ptr up one node
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
}// why no need for PREVIOUS??
else if (CURSOR == REAR_ptr) // TARGET node was the last in the list
{ // will need PREVIOUS for this one
PREVIOUS_ptr -> link = NULL; // since this node will become the last in the list
REAR_ptr = PREVIOUS_ptr; // = REAR_ptr; // moves REAR_ptr into correct position in list
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
else // TARGET node was the middle of the list
{ // will need PREVIOUS also for this one
PREVIOUS_ptr -> link = CURSOR-> link; // moves PREV nodes' link to point where CURSOR nodes' points
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
bool Linked_List::isEmpty()
if ((FRONT_ptr == NULL) && (REAR_ptr == NULL))
{ return true; }
else
{ return false;}
llmain.cpp (main source file):
#include <iostream>
#include <string>
#include <iomanip>
using namespace std;
#include "linkedlist.h"
int main()
Linked_List one;
one.insert("Angela", 261);
one.insert("Jack", 20);
one.insert("Peter", 120);
one.insert("Chris", 270);
one.print_list();
one.remove("Jack");
one.print_list();
one.remove("Angela");
one.print_list();
one.remove("Chris");
one.print_list();
return 0;

setw is the equivalent of the field width value in printf. In your code, the printf version would look like:
printf("%8s", CURSOR->name.c_str());
I much prefer printf over any I/O formatting in C++. See the printf man page for more information. I recommend using Bwana: http://www.bruji.com/bwana/
I do think it is a good idea to verify your code on the platform it will be tested against. That means Visual Studio. However, you don't want to use Visual Studio. As you have found out, it gets people into too many bad habits. Linux is much the same way. Both development platforms are designed to build anything, whether or not it is syntactically correct. Both GNU and Microsoft have a long history of changing the language standards just to suit themselves.
I don't know what level you are in the class, but I have a few tips for you. I'll phrase them so that they answers are a good exercise for the student
* Look into const-correctness.
* You don't need to compare a bool to 1. You can just use bool. Plus, any integer or pointer type has an implicit cast to bool.
* Don't reuse your CURSOR pointer as a temporary index. Create a new pointer inside the for loop.
* In C++, a struct is the same thing as a class, with all of its members public by default. You can create constructors and member functions in a struct.
* Optimize your function arguments. Pass by const reference instead of by copy. You will need to use pass by copy at a later date, but don't worry about that now.
* Look into initializer lists.
* In C++ NULL and 0 are always the same.
* Return the result of an expression instead of true or false. Technically this isn't officially Return Value Optimization, but it is a good habit.
Of course, get it running first, then make it fancy.

Layout Problem, Help Need

I developed one custom Report, which will print on pre print stationary. Really Problem here is when i send to printer it will printer properly on 8/12 By 11 Page, but i don't what is the reason it is not printing on Page after 7 Inch, even i thought i increase layout width it dos't Print after 7 Inch on Page, can i know why it is doing like these, any clue, please let me know.
Report Verions : 6i
Main Section : Width => 8.5
Height => 12.5
Orientation => Portrait
Report Width => 80
Report Height => 90
Your Help Rally appreicate in advance.
Thanks,
Praveen

You may need to contact support and actually show them the report to really solve the problem, but here are a few things to check first:
a) Check the report margins, make sure that they will allow the report body to display past 7".
b) Check that the frames and repeating frames are set to horizontally variable, or expand so that they can grow if required.
Hope this helps,
Danny

Windows 7 Adobe Air Uninstall problem - Help Needed

I can't uninstall Adobe Air from my control panel or manually from the cmd prompt [AdobeAIRInstaller.exe -uninstall] I get an error box that
says that the Adobe Air Installer has stopped working.
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe AIR Installer.exe
Application Version:    2.7.1.19610
Application Timestamp:    4e3c2b43
Fault Module Name:    mlang.dll
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5bda21
Exception Code:    c0000005
Exception Offset:    0000bbff
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Here is my install log:
[2011-08-02:01:11:23] Runtime Installer begin with version 2.7.0.19480 on Windows 7 x86
[2011-08-02:01:11:23] Commandline is: -update "c:\program files (x86)\adobe media player\adobe media player.exe"
[2011-08-02:01:11:23] Installed runtime (1.5.3.9120) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2011-08-02:01:11:23] Installed app (com.adobe.amp.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1) located at c:\program files (x86)\adobe media player\adobe media player.exe
[2011-08-02:01:11:26] Relaunching with elevation
[2011-08-02:01:11:26] Launching subprocess with commandline c:\users\ratliff\appdata\local\temp\air2261.tmp\adobe air installer.exe -ei
[2011-08-02:01:11:28] Runtime Installer begin with version 2.7.0.19480 on Windows 7 x86
[2011-08-02:01:11:28] Commandline is: -stdio \\.\pipe\AIR_5572_0 -ei
[2011-08-02:01:11:28] Installed runtime (1.5.3.9120) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2011-08-02:01:11:28] Starting silent runtime update. Updating runtime from version 1.5.3.9120 to version 2.7.0.19480
[2011-08-02:01:11:28] Installing msi at c:\users\ratliff\appdata\local\temp\air2261.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-08-02:01:11:29] Runtime Installer end with exit code 0
[2011-08-02:01:11:29] Elevated install completed
[2011-08-02:01:11:31] Launching subprocess with commandline c:\program files (x86)\adobe media player\adobe media player.exe
[2011-08-02:01:11:31] Runtime Installer end with exit code 0
[2011-09-06:09:04:13] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-06:09:04:13] Commandline is:
[2011-09-06:09:04:13] Installed runtime (2.7.0.19480) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-06:09:04:16] Relaunching with elevation
[2011-09-06:09:04:16] Launching subprocess with commandline c:\users\ratliff\appdata\local\temp\aira35e.tmp\adobe air installer.exe -ei
[2011-09-06:09:04:16] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-06:09:04:16] Commandline is: -stdio \\.\pipe\AIR_3156_0 -ei
[2011-09-06:09:04:16] Installed runtime (2.7.0.19480) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-06:09:04:17] Starting silent runtime update. Updating runtime from version 2.7.0.19480 to version 2.7.1.19610
[2011-09-06:09:04:17] Reinstalling c:\users\ratliff\appdata\local\temp\aira35e.tmp\setup.msi
[2011-09-06:09:04:18] Runtime Installer end with exit code 0
[2011-09-06:09:04:18] Elevated install completed
[2011-09-06:09:04:20] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2011-09-06:09:04:20] Runtime Installer end with exit code 0
[2011-09-06:09:04:20] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-06:09:04:20] Commandline is: -installupdatecheck
[2011-09-06:09:04:20] Installed runtime (2.7.1.19610) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-06:09:04:20] Performing pingback request
[2011-09-06:09:04:21] Pingback request completed with HTTP status 200
[2011-09-06:09:04:21] Starting runtime background update check
[2011-09-06:09:04:21] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update
[2011-09-06:09:04:21] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update to C:\Users\Ratliff\AppData\Roaming\Adobe\AIR\Updater\Background
[2011-09-06:09:04:21] Runtime update not available
[2011-09-06:09:04:21] Unpackaging cancelled
[2011-09-06:09:04:21] Runtime Installer end with exit code 0
I suspect this is causing a few of my other programs to crash as well.
Please Help!
Jamie

Hi Jamie,
The install log looks fine, but the last entry was September 9th. I suspect the crash is occuring before the new log entries can be made.
Could you please open a new bug report on this over at bugbase.adobe.com? We'll want to get a crash dump so we can try to figure out what might be causing this to happen. You didn't mention what OS you were running, but I found this tech doc on the net that describes how do generate the .dmp file:
Creating Dr. Watson crash dumps
Thanks,
Chris

9i Developer suite login problem. help needed ASAP

i installed oracle 9i developer suite, my problem is i can't login. this is the error ora12560: TNS: oracle adapter error.
or
if i put the hostname it displays a no listener error and closes. i tried to create a listener in net configuration assistant, but i can't see it in services.
i'm using windows XP. and not conneted to any machine.
do i need any changes on my window settings?
please help...
thanks
here is my listener.ora
ABC =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\OraHome)
(PROGRAM = extproc)
tnsnames.ora
TEST.ABC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ABC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = test.ABC)
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle)

check your operating system network protocole is TCP/IP is installed if so check is there any problem with these protocoles. this error is encounter generally due operating system network protocoles it is not an oracle error. here is discription.
TNS-12560 TNS:protocol adapter error
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification. Before reporting this error, look at the error stack and check for lower level transport errors.For further details, turn on tracing and re-execute the operation. Turn off tracing when the operation is complete.

HELP, need quick script fix

Hi,
Our InDesign is acting up here. We are designing massive amounts of tables for various annual reports. After the design for print is done, these tables need exporting to xHTML.
We have tested this extensively, and written complicated CSS files and many cell-styles to make it work.
The thing is, that now when the final test-export needs to be done. InDesign suddenly returns a Stack Overrun error message when exporting. The only thing that seems to happen is that we cut out each page, paste it into a new document, save, and then do the xHTML export. But we are talking hundreds of pages here.
My Apple script is not too good, but I am sure this can be done by a simple script. And I am quite sure it has been done before.
Can anyone here please point me in the correct direction.
PS. A bug report has been made to Adobe about this issue

Thank you for the quick reply. Smart ports look very cool. I like the idea and may find this useful for other purposes but if I am reading this right, it won't work for what I need. It looks like he would need to log into the switch to apply the macro. He is a phone guy and does not want to actually touch the switch. So I was looking for like a perl script of something that I could configure with my TACACS credentials. Also I won't know what port he needs reconfigured until he needs it, so I need him to be able to add the port number as a variable without him actually having to do any programming. he would be will to run it as part of a command (i.e run command.exe 10.10.10.22 g1/0/22 222, where 10.10.10.22 is switch IP, g1/0/22 is port, and 222 is the new vlan) or if I can do somekind of prompt that would be great!

3 problems help needed

1) How to have the JList maintain the previous record of user selection on my list of checkboxes ?
2) another problem regarding JList,
how do i get the chekboxes to checked byitself when user clicks select all button ?
here's a portion of how my checkboxes are created in the jList :
int index = list.locationToIndex(e.getPoint());
CheckableItem item = (CheckableItem)list.getModel().getElementAt(index);
item.setSelected( ! item.isSelected());
Rectangle rect = list.getCellBounds(index, index);
list.repaint(rect);
3)I would like to know how do i go about coding for particular rows in the table to be grayed?
Hope there's some examples to help me ,
Thank You in advance

1) If i understand your problem correctly you have a list selection listener and have it writeto a log.
2)
for (int i=0;i<jbs.length;i++)
jbs.setSelected(true);
3)
Extend/write a cellrednerer. in its get.... method row and collumn are parameters and you may set the color according to them.

Basic java problem help needed please

the problem is :
to produce a program which will show membership rates for a golf club..
membership yearly rate new member joining fee
category
full 650 3000
associate 200
ladies 350 2000
under 18 175
new members must pay a joining fee in addition to the yearly rate as shown
full/ladies members also prepay 150
write a program which will enter details of members,calculate and output the total amount each member should pay.
output number of members in each category
the total income for each category....
i need this program to show each category individually...cant do it at all..been at it a week....must be me && and || signs...i think...plz can someone help me as im really stuck now...thank you so much..
import java.util.Scanner;
public class assignmentquestion3 {
public static Scanner key=new Scanner(System.in);
public static void main(String []args){
int fullfee=800,newfullfee=3800,associatefee=200,newla diesfee= 2350,ladiesfee= 350,under18fee = 175;
int selectcat=0;
int reply = 0;
int addmember=0;
int currentfulltotalmem=0,newfulltotalmem=0,associatet otalmem=0,ladiestotalmem=0,under18totalmem=0;
int assoctotalcash=0,ladiestotalcash=0,under18totalcas h=0;
int fullprepay=150;
int ladiesfull=2500;
int completefull = 0;
int ladiescurrent=500;
int under18=175;
//Main introduction screen for the user and selections available. do while loops only allowing numbers 1,2,3 or 4.
do{
do{
System.out.printf("\n\t %90s","********************Membership Rates For The Golf Club********************");
System.out.printf("\n\n %105s","This program will allow users to enter details of members as well as calculating and.");
System.out.printf("\n%106s","outputing the total amount each member should pay. The program allows users to view the");
System.out.printf("\n%106s","total number of members in each category and the total income for each category.");
System.out.printf("\n\n\t %75s","Please select your membership category: ");
System.out.printf("\n\n\t %68s","Please press '1' for FULL");
System.out.printf("\n\n\t %68s","Please press '2' for ASSOCIATE");
System.out.printf("\n\n\t %68s","Please press '3' for LADIES");
System.out.printf("\n\n\t %68s","Please press '4' for UNDER 18");
System.out.printf("\n\n\t %68s","Please enter 1,2,3 or 4: ");
selectcat=key.nextInt();
}while (selectcat>4 || selectcat<1);
do{
System.out.printf("\n\n\t %75s","Are you a Current Member (press 1) or a New Member (press 2): ");
reply=key.nextInt();
}while (reply<1 || reply>2);
//if number '1' for 'FULL' category is selected by the user and reply is 'yes'(1) then new full member fee is shown to user
if (selectcat==1 ||reply==1)
System.out.printf("\n\n\t %68s","CURRENT FULL MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Current full membership fees yearly are "+fullfee+"");
System.out.printf("\n\n\t %68s","Full members must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %72s","The total of this membership is: "+fullfee+"");
currentfulltotalmem=currentfulltotalmem+1;
System.out.printf("\n\n\t %72s","The total number of 'CURRENT FULL MEMBERSHIPS = "+currentfulltotalmem+"");
completefull=completefull+fullfee;
System.out.printf("\n\n\t %68s","The total amount of income for 'FULL MEMBERSHIPS' within the club = "+completefull+"");
//if number '1' is selected by the user and reply is 'no' (2) then full member fee is shown to user
else if (selectcat==1 &&reply==2)
System.out.printf("\n\n\t %68s","NEW FULL MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Full membership fees yearly are "+newfullfee+"");
newfulltotalmem=newfulltotalmem+1;
System.out.printf("\n\n\t %68s","The total number of 'NEW FULL MEMBERSHIPS = "+newfulltotalmem+"");
completefull=completefull+newfullfee;
System.out.printf("\n\n\t %68s","The total amount of income for 'FULL MEMBERSHIPS' within the club = "+completefull+"");
//if number '2' is selected by the user then associate member fee is shown to user
if (selectcat==2 &&(reply==1 || reply==2))
System.out.printf("\n\n\t %75s","ASSOCIATE MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %75s","ASSOCIATE membership fees yearly are "+associatefee+"");
associatetotalmem=associatetotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'ASSOCIATE MEMBERSHIPS' WITHIN THE CLUB = "+associatetotalmem+"");
assoctotalcash=assoctotalcash+associatefee;
System.out.printf("\n\n\t %68s","The total amount of income for 'ASSOCIATE MEMBERSHIPS' within the club = "+assoctotalcash+"");
//if number '3' is selected by the user and reply is 'yes' then new ladies member fee is shown to user
if (selectcat==3 &&reply==1)
System.out.printf("\n\n\t %68s","LADIES CURRENT MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Ladies full membership fees yearly are "+ladiesfee+"");
System.out.printf("\n\n\t %68s","Ladies must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %68s","The total of this membership is: "+ladiescurrent+"");
ladiestotalmem=ladiestotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'LADIES MEMBERSHIPS' WITHIN THE CLUB = "+ladiestotalmem+"");
ladiestotalcash=ladiestotalcash+ladiescurrent;
System.out.printf("\n\n\t %68s","The total amount of income for 'LADIES MEMBERSHIPS' within the club = "+ladiestotalcash+"");
//if number '3' is selected by the user and reply is 'no' then the current ladies member fee is shown to user
else
if (selectcat==3 && reply==2)
System.out.printf("\n\n\t %68s","LADIES NEW MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","LADIES NEW MEMBERSHIP fees yearly are "+newladiesfee+"");
System.out.printf("\n\n\t %68s","Ladies must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %68s","The total of this membership is: "+ladiesfull+"");
ladiestotalmem=ladiestotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'LADIES MEMBERSHIPS' within the club = "+ladiestotalmem+"");
ladiestotalcash=ladiestotalcash+ladiesfull;
System.out.printf("\n\n\t %68s","The total amount of income for 'LADIES MEMBERSHIPS' within the club = "+ladiestotalcash+"");
//if number '4' is selected by the user then under 18 member fee is shown to user
else if (selectcat==4 &&(reply==1||reply==2))
System.out.printf("\n\n\t %75s","UNDER 18 MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %75s","UNDER 18 yearly membership fees are "+under18fee+"");}
System.out.printf("\n\n\t %68s","The total of this membership is: "+under18+"");
under18totalmem=under18totalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'UNDER 18 MEMBERSHIPS' within the club = "+under18totalmem+"");
under18totalcash=under18totalcash+under18;
System.out.printf("\n\n\t %68s","The total amount of income for 'UNDER 18 MEMBERSHIPS' within the club = "+under18totalcash+"");
//allowing user to select '0' to add another member or any other key to exit program
System.out.printf("\n\n\t %68s","Please Press '0' to add another member or any other key to exit.: ");
addmember=key.nextInt();
}while (addmember==0 ||addmember>1);}}
the problem im having is whenever i make the choices 1,2,3,4 (CATEgorys) AND hit 1 or 2(current or new member selections) it brings up more than one category...
for example when i hit 1(Category full) and 1(current member)..it displays this:
Are you a Current Member (press 1) or a New Member (press 2): 1
CURRENT FULL MEMBERSHIP SELECTED
Current full membership fees yearly are 800
Full members must also pre-pay 150 on a card can be used in the club facilities such as bar and shop
The total of this membership is: 800
The total number of 'CURRENT FULL MEMBERSHIPS = 1
The total amount of income for 'FULL MEMBERSHIPS' within the club = 800
The total of this membership is: 175
The total number of 'UNDER 18 MEMBERSHIPS' within the club = 1
The total amount of income for 'UNDER 18 MEMBERSHIPS' within the club = 175
Please Press '0' to add another member or any other key to exit.:
under 18 membership as well?...does this for other selections too...is it my arithmetic operators?....my if loops?...

Multi-post [http://forums.sun.com/thread.jspa?threadID=5346248&messageID=10498270#10498270]
And it still doesn't compile.

SQL problem - help needed ASAP!!

Hey guys,
Doing a college project... would really appreciate some help. I am trying to use a variable in the where clause of a select cursor in PL/SQL. The code is this:
procedure results(p_search_entry varchar2, p_search_field varchar2) is
cursor c_results is
select * from physics_b where p_search_field = p_search_entry;
begin
for cv_results in c_results
loop
-- loop through actions
end loop;
The problem is that I don't know how to get the where clause to accept the variable passed into the procedure as the field name. Does anyone know the syntax for this?
Thanks very much!
Niall

This isn't the correct forum for this kind of question. The SQL and PL/SQL forum PL/SQL is probably best.
That said, you can't do what you want that way.
You can do
procedure results (p_search_entry in varchar2)
cursor c_result is
select * fro physics_b where subject=p_search_entry;(assuming subject is a column in physics_b)
You can't use a variable to represent a column directly. You need to build the statement as a string and then use execute immediate.
statement:='select * fro physics_b where '||p_search_field||' = :1';
-- this bit is probably bad syntax.
execute immediate statement using p_search_entry;Look up execute immediate and bind variables

Interesting problem - Help Needed

I am currently working on developing a report that has a cross tab layout. The number of columns are arbitrary and decided at run time. I am trying to create a
report template. The XML feed for the report has the following structure
<group name="SETTLE_INFO" source="settlementlvl">
     <element name="SETTLE_DATE" value="umb_settlement_date"/>
     <element name="BANK_NAME" value="bank_name"/>
     <element name="PRODUCT_NAME" value="product_name"/>
     <element name="PRODUCT_LVL_TOTAL_BAL" value="prtdlvl_balance"/>
     <element name="PRODUCT_LVL_TOTAL_ACCNTS" value="prtdlvl_account_count"/>
</group>
Here each settlement date may have many banks having many product levels. I am trying to summarize this information in a cross tab report which has the following structure:
For each settlement date (row) -> for each group of Banks(column) -> for each group of products under each Bank(column) -> display total summation of bal and accounts for each product (cell).
How do I generate these multiple levels of dynamic columns at run time?
Ashwin

Thanks for your help. I am able to generate columns at run time but my problem is a bit more complex.
I have to generated a table structure like following:
| UMB Settlement Date | Bank Name1 | Bank Name2 |
| ------------------------------------------------------------------------------------------------------------------
| | Product Name1 | Product Name2 | Product Name1 | Product Name2 | Product Name3 |
|--------------------------------------------------------------------------------------------------------------------------------------------------
The problem that I am facing is that I am not able to get the desired structure like this, i.e encapsulating the products columns under the bank column.
My RTF template look like the following:
UMB Settlement Date <?horizontal-break-table:1?> |     <?for-each-group@column:SETTLE_INFO;./BANK_NAME?><?BANK_NAME?><?end for-each-group?> |
| <?for-each-group@column:SETTLE_INFO;./BANK_NAME?><?variable@incontext:G3;BANK_NAME?><?for-
| each-group@column://SETTLE_INFO;./PRODUCT_NAME?><?if: count(current-group()
| [BANK_NAME=$G3])?><?PRODUCT_NAME?><?end if?><?end for-each-group?><?end for-each-group?>
--------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------
The bank header column and the product header column are out of sync. How do I make sure that the product name column is contained within the header of the bank name column.
Please let me know if you need more information about this.
Ashwin

Medscape log in problem. Help needed quickly!

Similar Messages

Maybe you are looking for