Medusa Headphones+Audigy 2zs Strange Outp

I have bought these today SpeedLink Medusa SL-8793 5. ProGamer Edition (SP-026-SL) , everything seems to be fine and good quality, but the only thing is that i have an Audigy 2zs, and the vibration will work only if i plug the subwoofer cable into either where the rear or the front cables should be, but this then causes the speakers to response wrong to the surround sound system, like the rear doesnt sound where the rear should be, howerver if i plug in the subwoofer into the subwoofer and the rest normal, i get perfect surround sound system, please help i would like to have the vibration and the surround sound
I also recieved a reply from medusa help and they said change the output channel in the software, any experts on creative audigy 2zs? clueless how t ochange output channels >,<
falty batch or anyone can shine some light?
thanks in advance
Roger

Bump

Similar Messages

Center Rears disappear in headphones (Audigy 2ZS + T7700)

I have an intersting problem: I work in the audio industry, so my troubleshooting knowledge is extensive, but this just doesn't make sense. When I run the speaker settings tool (I'm running my T7700 speaker system as a 5.1 system atm) I can chose channel or noise and each speaker is correctly identified. When I plug my headphones into the T7700 pod and run the same test, the left and right speakers identify correctly, but there is no audio for the center or left rear/right rear. My setting in Windows XP (SP2) are in sync with the Speaker Setting panel (5.1) so I'm really baffled why the center and surround audio is suddenly disappearing. The pod worked perfectly on my last system, and going from speakers to heaphones (by simply plugging into the pod) has never caused a previous issue. It can't be phase cancellation, since the left and right rears are annuciated seperately by the test program.
Again, without the heaphones plugged into the pod, I'm hearing all 5 (well, 6 including the sub) speakers correctly, but when I plug heaphones into the pod, the center and rears cease to work. Starving for advice here.

W2ge,
You may possibly need to re-adjust your analog speaker connectors into the Audigy 2 ZS . The are 7 connections on the Audigy cards, number 1 is your firewire connector and number 7 at the other end is your digital connector. Make sure that your analog speaker connector wires are connected as follow:
connector 2 (next to firewire) - Yellow connector
connector 3 - Black connector
connector 4 - Green wire
If these are OK then you may have Creative software set to 5.1 audio but your Windows XP audio / speaker set to 2.1 or earphone. Run through these steps:
a. goto control panel/sound and audio devices/volume tab
b. Goto Speaker settings at the bottom of the volume tab
C. click on advanced tab and then select "5,1 suround speakers.." in the drop dpwn menu & then click OK twice.
Good luck,

Question on hooking up an Audigy 2zs to my home theatre syste

im trying to hook up my home theatre system to my pc. does anybody know if the "creative sound blaster digital I/O module cable" (which is an adapter that converts /8" headphone jack to a digital optical cable), is compatible with the Audigy 2zs card? so far i heard its only compatible with the audigy 2 value card..why not the 2zs?
Message Edited by listento3 on 06-27-2006 :6 AM

listento3,
Are you referring to the Digital I/O module unit's If that's the one, then no, I'm afraid it doesn't work with the Audigy 2 ZS soundcard. If your HT system works with coaxial input, you can use coaxial instead of optical.
Jason

Audigy 2ZS Digital

Just would like a confirmation on this...
If you connect the Audigy 2ZS digital out to a standard stereo reciever (sony) digital coax in it will not damage the reciever?
Sounds silly but I know the digital out is meant for connection to propietary creative lab speakers, and I have read that connecting it to other devices can damage them.
Also I should use a regular small "headphone" jack to connect to the digital out on the audigy 2ZS? This should be a mono cable also?
Please help.. thanks!!!
If you can link to the cable/adaptor I would need that would be great!Message Edited by asharabi98 on 05-29-2006 :23 AM

Any stereo cable with jack on one end and RCA conenctors at the other is fine. It will not damage the receiver. Something like this (use one of the RCA only - I think is the white one for front speakers):
<IMG src="http://us.st.yimg.com/us.st.yimg.com/I/trianglecables-site_900_56428">
Read the FAQ about digital connection and be prepared to have only stereo sound in games because Creative soundcards cannot send surround sound from games over digital connection.
Message Edited by SoNic2367 on <SPAN class=date_text>05-29-2006 <SPAN class=time_text>04:33 PM
Message Edited by SoNic2367 on 05-29-2006 04:34 PM

Audigy 2zs notebook - Can hear but NOT record effect of Graphic Equalizer

Dear people,
Audigy 2zs notebook card, using with sonar-le to record (and also with Audacity).
I can record all I play with my soft synths, and mic voice, perfectly. Various tracks simultneously.
Playback is also great.
I use sonar-le in Asio 2-Mode, and MME and all works good.
HOWEVER, I bring up the Creative equalizer, and I enable it, it makes a NOTORIOUS difference.. I can enable it while I am recording, before, or after.
So I record a track as usual, but I enable the equalizer, and I am FINDING-OUT that I can not seem to be able to RECORD the effect of the creative EQUALIZER!
Even though I can hear it in and out, big difference, the track recorded wave continues to record as if it does not see the equalizer at all.
I have tried all available inputs and many many things, but I just can not get the eq. effects to RECORD.
I have two speakers connected to the dongle that attaches to the notebook card... I have also tried using headphones, directly connected to card, and all I can think. I tried also mme mode.
I also tried audacity and same. Can't get the recording to be like what I hear with the headphones.
Why would this be? How can I solve the problem?
Thanks a lot!

neutron wrote:
Whoops!? That sequencer/recording application "Cubasis VST 4" comes packaged with Audigy 2ZS Platinum Pro but not with the Notebook soundcard. A similar product Cubasis LE comes with X-Fi Elite Pro.
I haven't seen any details of the internal layout/architecture of the sound card, but I don't think that would help you in terms of some new configurations for recording.
In terms of recording capability, since there is only one input port with the NOtebook card, you are of course fairly limited in terms of connectivity, unless you have an external mixer (if you are talking about recording two things at the same time).
However, the audio quality of the Notebook card is certainly good enough to record very good quality audio with S/N, THD etc. My opinion is that people spend way too much time fussing about specs, noise etc. where in reality, most external transducers (mics, guitars etc.) always limit the recorded quality (unless you have really good professional recording gear and you have a lot of experience.
I've heard outstanding quality recorded music made on recording gear with much poorer specs than the Notebook card.
Best thing with your Notebook card is do what you've been doing. Use it and experiment and concentrate on the music generation itself.
Thanks for the reply!
I gather that the application may not be downloadable, specially if it is third-party. I do have the Synth effect, though that I can plug into Sonar.. I like the hardware enabled effects, though, specially since my music playing/recording system is a little complex.
Yes, I do have external hardware mixers, and though there is only the mic/line input, that's not too bad since this card has MANY internal inputs and outputs that I DO USE. All? of my instruments and music is now software based..Only the Mic is external. That's why the hardware synth of the 2zs laptop is so attracti've.. It does not bear on cpu or data... That's why I asked about architecture info orient myself.
Also, I may be wrong, but I read that many of the hardware capabilities of the 2zs notebook card are no longer there on the newer cards... That effects and other things are now mostly software based? Is that so?...Can I use two cards on the laptop, the 2 zs and the express slot one simultneously and have more inputs/outputs?
I am still interested in all practical possibilities, and I do like the Creative soundcards.
The great thig is that you told me that the Eq can not be recorded, so that's very important to me.. I can still record it, though out into a second laptop via the headphone jack. But I will try the VST's I have here first and see how they feel and sound.
It really amazes me, though, that I can hear the effect, but there's no way to record it.
Maybe a new driver could do it's
Thanks and best wishes!

Audigy 2zs bleeps while playing g

hi
this is my fist post here
so to my problem
when i play call of duty 2 it makes this bleep sort of like a plink noise. now that isnt the problem the problem ios it does it repetitavly for ages if it did it only a couple of times i wouldnt be bothered but of im in a clan match it gets very annoying as i cant here what my team are saying
i managed to sort it once by disbleing the audigy 2zs and using a my onboard a while then enabled the zs again that seemed to have fixed it but now it is back
it never used to do it when i had my sb audigy but then i upgraded it to audigy 2 zs
alos it onlyseems to do it in call of duty 2
does anyone one know what the problem is ?
its not my system over heating or anything as it is comeing from my headphones/speakers
i did the auto update for my audigy 2zs got some newer drivers etc but it didnt help
i would appriciate it alot if someone could please help me
thanksMessage Edited by jahobo on 0-5-2006 02:30 AM

bump. installing 32 bit windows is no solution.

Audigy 2ZS is

I use my Audigy 2zs with a Zalman ZMRSA 5. Headphone amplifier and ZM-RS6F 6. Headphones. Up until this morning the setup has worked flawlessly. However, upon powering up my PC I found that I was hearing sound in only one ear..... now either I am going deaf, or more likely there is a problem. Have checked leads, windows settings etc, nothing has changed. At the moment I am trying to eliminate my soundcard from the list of possible faults..... however.....
I currently have my PC Rigged up to my hi-fi (2 speakers)and note that when I connect to line-out, I only get sound from one of my speakers, whereas outs two and three give me stereo output. I have tested all cables and wiring, and have gone as far as to reseat the card in my PC. I dont understanbd why it worked fine last night, but now I lose stereo output from out- (supposedly connecting to front/rear, as per Zalman and/or Creative install instructions for 5. speakers.)
System is Windows XP Service pack 2.
Anybody got any ideas or is my card/the connector on it goosed?
Cheers
Andrew

<IMG src="http://img73.imageshack.us/img73/8080/audioproblem7uo.jpg">Sorry to be such a nag but I want to make 00% sure its not my card thats screwd and just a software/driver problem. This image is what happens after trying to install this driver either from cd or from the latest drivers. It just wont copy one file into the system32 folder.

[Soundblaster Audigy 2ZS] Sound cutting out in middle of gamepl

I have Vista, and I never had this problem with XP.
I downloaded the Vista drivers and have ran Windows Update for all the missing drivers.
When I run dxdiag.exe
I go to the sound tabs and find this.
The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
For Sound
and Sound 2
Sound 3 says everythign is fine.

I've found that Audigy series cards "cut out" if you alter speaker properties in Vista Control Panel.
Creative umm... bug I think that's what they call it...
For example
I find 6bit, 48000 Hz (DVD Quality) is the highest quality I can set.
I've seen it on Audigy 2, Audigy 2ZS and Audigy 4. Win32 and Win 64.
Is your adapter set to studio quality If so - that's most probably it.
Hope this helps.

Connecting Soundblaster Audigy 2zs to Home Theater Amplif

Can I connect my Soundblaster Audigy 2zs directly to an amplifier and still get 5.,6.,or7. speaker setup? I feel it's kind of redundant to use a reciever when the Audigy has all the capabilities of a Home Theater Reciever. And it outputs sound at 92khz, which currently is only available on more expensi've recievers.
My goal is to use my pc as a souce and connect it directly to amps and speakers. I would like to put money I save on recievers into a high end speaker system
I have read in the previous posts that it may be possible to do 5. by getting an mini jack to RCA adapter for each channel. But no details on 6. or 7..

I am in the same situation as you. As the CL told me
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5343 --
You can either use the audigy to decode the sound or your reciever to decode the sound with the SPDIF passthrough. Just whichever has the better specs.
From my situation I would recommend having speakers with analog hookups to the front/rear/center sub rather then the digital output. The only way to take advantage of the digital output is with a DVD and in that case you can just watch a DVD on your TV rather then your computer. For games the analog 5. hooks is better as well because with games it decodes it and with your reciever it would only have 2. sound.

Is Creative Audigy 2ZS Platinum Sound Cardcompatible with Yamaha Keyboards? (XG sound

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

SB Audigy 2ZS Plarinum Pro: setting source for recording

Hello!
I am having problems setting the source for recording. I want to set the recording source from 'Wave' (default) to 'Line-In /Mic'. After doing so with the mixer or the MediaSource Player it resets to 'Wave' after some time. Why? Can I force the software to make 'Line-In /Mic' the default setting? It really dri'ves me nuts to see that the source has changed without me being notified. I want to have the source changed only by myself and not by some cozmic radiation, God's will, voodoo magic and whatnot.
Greetings
ClustalW

<Re: SB Audigy 2ZS Plarinum Pro: setting source for recording? Okay ClustalW, I understand the "Default" problem you are having. So can you go to control panel, and sound and there look at your recording devices and tell me what do you see? If your desired device is there, you can choose it as the default and then throughout the rest of windows, this will be THE global default recording device or the first choice, when you are in other programs to record from. Also, make sure your device is plugged in when making this change. On my system with that board, a few years ago, I could make the choice, but it would always pick something else when the source was unplugged. For example, if I were using the front bay inputs as recording, when I would unplug them and reboot, my system picked the next thing as default.
Next go into to your Creative Control panel and do the same thing there. Theoretically your choices should be linked, but this is not always the result. I can choose mine in Vista and windows 7, but lastly I always go to the Creative mixer applet and do it there and that works best. For me, my default is my front panel Mic or Microphone FP but as soon as I unplug it, it wants to make my back mic jack the default.

SB Audigy 2ZS clicking quest

Before I go through the hassle of tweaking all kinds of settings in windows and scrubbing and reinstall drivers (and thereby getting progressi'vely more frustrated), I want to see if anyone else has had the same problem I am and if they found a solid solution.
I have an Intel P4 based machine with a gugabyte 8KNXP mobo. The only cards in my machine are an ATI Radeon All-In-Wonder 9800 PRO, and my Audigy 2ZS. The vid card is riding in the AGP slot, and I have moved my sound card to every PCI slot except the one next to the video card due to heat reasons.
My sound is perfectly fine whenever I am not gaming. When it does act up, I do not get the crackling I have heard posted here by other people. What I get is a very regular click/pop. It is very sudden, very short, and *very* regular. The clicks are usually about a second and a half apart. The clicking isn't always present. It will come and go. When it shows up, it usually continues until I shut the game down, although there are cases when it will just suddenly stop and everything is ok again.
I have had this problem playing online games. WoW, EQ2, EVE, GuildWars, etc... Non-network games don't give me this problem.
The obvious assumption here is that it is network related. My motherboards onboard network controller is on IRQ 8. My audigy is on IRQ 22. No conflict there.
Has anyone experienced a similar problem?

Hello,
Thanks for the reply! In surround mixer, under source, I do see the last slide on the right is mic, but there isn't a mute option under the slide. I tried moving the slide all the way down, but that didn't help. Any other ideas? I'm desperate!!!!!!! Need communication during game!! Thanks

SB Audigy 2ZS distorted so

I upgraded my SB Li've card with the SB Audigy 2ZS and noticed that while listening to songs and playing games, the sound is distorted. It sounds like the music is playing at a high speed and breaking in short intervals.
I have upgraded the drivers with the latest version available from the Creative website. I also upgraded to the latest Direct X driver - Ver 9. The Creative Diagnostics indicate no issues with the card.
Please advise, Thanks

PaulBrain wrote:
Hi!
I've noticed partially extremely distorted MIDI-Sound on my Audigy 2ZS Platinum Pro; it seems that the problem gets worse the more instruments are playing simultaneously; it doesn't seem to depend on which soundfont is loaded, and if, then only slightly. I didn't encounter the problem with the original drivers (at least I believe so), but I can't step back to the old ones because of their awful BF2-support. Currently I'm using the latest drivers (not beta). Anyone else experiencing this problem? Thanks for your answers!Message Edited by PaulBrain on 02-04-2006 07:7 AM
Select another MIDI Playback Device on Windows Audio settings (try "SB Audigy 2 Zs Synth A [xxxx]" for example).
jutapaMessage Edited by jutapa on 02-04-2006 09:27 AM

Connecting vcr to external SB Audigy 2zs Platinum Pro

I've just joined, so apologies if I "mess up". I have some precious things on vhs tape, and want to transfer them to cd/dvd. I run Windows XP. I have to use rca connections, don't think there's another option on the vcr. I see the red and white rca connections on the back of the external 2zs, but where does the yellow (video) connection go? Would be very grateful for help. TIA.
Sybil
Message Edited by Drummond on 04--2009 05:32 [email protected]

Re: connecting vcr to external SB Audigy 2zs Platinum Pro~ Hi Katman - many thanks for the reply. There is no video connection on the SBA2zs that I can find either. I did send mail to Creative, but they haven't had the courtesy to respond. If I use the 2zs for the audio connection, can I then attach the video connection from the vcr to a separate video capture card? Will this bring everything together and in synch? Sorry, I'm still very much on L plates with all this. Once I get things on to the computer, I can then edit out what I don't want, and burn the rest to cd/dvd; or that's what I'm hoping!! It's getting the data from the vcr tape that's the stumbling block. I know there are?expensi've machines that you can put the vhs tape in and it will copy direct to dvd, my friend has one, but she doesn't know whether you can pause the recording (disk) and let the tape continue running till she gets to the next bit she wants to copy, then start the disk again. TIA of further help.
Sybil
Message Edited by Drummond on 04-3-2009 04:05 AM

Audigy 2ZS ongoing issue/need help ba

Specs:Intel Celeron D @ 2.93 ghzAsus P4S800D-XSB Audigy 2 ZSXFX GeForce 6600GT430W CoolerMaster2 x 52MB Kington?I recently upgraded my motherboard to the one listed above and now after installing my Audigy 2ZS card, my computer locks up during games after about 5-0 minutes of gameplay (sound cracks and/or loops)... I cannot even receive an error message or no minidump is reported. I have tried a million and one things to correct the problem including many of the methods here in Creative's KnowledgeBase. When my Audigy card simply sits in one of the pci slots in my mobo...this dreadful symptom?occurs. Even if no drivers are installed and it is disabled, the problem occurs. I've tried moving the card around from slot to slot...and I know its not sharing it IRQ... I've done everything I can think of and posted on many forums with no luck... If anyone knows anything about this...plz helpI appreciate any feedback.

No one knows anything...moderators?

Medusa Headphones+Audigy 2zs Strange Outp

Similar Messages

Maybe you are looking for