Meeeting Place Express and Tandberg Video Conferencing

I have been tasked with intergrating an existing Tandberg 880 and Tandberg 880 MXP with Meeting Place Express 2.x. I am unable to get video from or to the Tandberg cameras when participating in a Meeting Place Express meeting. If anyone knows what I am doing wrong please let me know. I have the 2 cameras set up as H.323 devices in CCM.

Dial the endpoint using it's IP. Or, if you have a Gatekeeper and Gateway, than you may understand that an alias E.164 may be needed. If so dial the unit by it's alias, which is usually the last 4 digits of it's ISDN#.
If the above is done and still issue's than a dialing digit may need to be used, for an example: We use 8 for tele calls and 9 for video calls. This is in the H323 Services in the Gateway configuration.

Similar Messages

  • Meeting place express and Windows 7 compatibility

    I wonder if someone already tried to use Meeting place Express 2.0 with clients that are using Windows 7 OS? If so I wonder if there are some compatibility issues?
    Regards

    At least with the 2.1.1.2 hotfix 36 version (last and highly recommended patch) of the product the Outlook plugin appears to work with Windows 7 32bit and Office 2007. It's getting increasingly touchy as Microsoft patches things and totally bombs in Office 2010 if you have the 64bit version.
    The Adobe Breeze interface seems to function without issue, even in the 64bit OS.

  • CUCM registered SX10s and adhoc video conferencing

    Hi All,
    We have a customer with CUCM 10.5 looking to do some very basic video conferencing (multi party but only need loudest talker switching).  Simplicity is key here, they are used to adhoc conferencing including MeetMe in CUCM using traditional IP phones.  They are looking at installing SX10s in a few meeting rooms, registered to CUCM 10.5.  The questions I have are:
    i) Is it possible to use a G2 ISR (2911 etc.) with a homogeneous conference bridge configured for h264 / HD 720p and have the SX10s be part of a conference?  The data sheet indicates the SX10s support 720p30 (http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-quick-set-series/datasheet-c78-731274.html).  I understand there would be some serious limitations here like no transcoding (all parties in the conference have to support the 720p stream), this shouldn't be an issue as all devices will be SX10s.
    ii) Is it possible to initiate a MeetMe conference from an SX10, either from the remote or a touch 10?
    ii) Is it possible to dial into a MeetMe conference from an SX10, either from the remote or a touch 10?
    iii) Is it possible to escalate a point to point call to an adhoc conference from an SX10, either from the remote or a touch 10?
    The Cisco TelePresence Endpoints and Cisco Unified Communications Manager document (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf) has a few lines on adhoc conferencing (page 54) which says "To enable ad hoc conferencing the CUCM must be set up with a Conference Bridge (media resources), and the conference bridge must be added as a Cisco Telepresence MCU in CUCM."  Which makes me doubt the PVDM3 video conference bridge would be supported.
    Are there any other solutions to a simple video conference requirement, or would it have to be a MCU registered to CUCM?
    Thanks,
    Jonathan

    With the SX10's registered to CUCM there is several options here. One is that if they own a good amount of CUWL then there is the ability to get free TelePresence Server licenses. I believe it is for every 30 CUWL pro they get 1 screen license and the ability to install conductor. In order to install this you need to make sure that you have VMware resources to handle those two installs. Then you can have your ad hoc meeting configured in that.
    If they want a physical appliance than a MCU 53xx can be used as well. License it based on how many people you want in one bridge.
    In either case you will need to configure the Media Resource Group option in UCM to point to those SIP trunks to allow for the 3 way video call to happen and it will be automatic to the end user. They will see a call coming in and then the option to accept and merge.
    I remember reading about using a GSR but it has to have the DSP 3 module in it for the video encoding.

  • Enable both PCI-Express and onboard video on Ultra 20 M2?

    I don't see any bios options to enable the onboard video if I have a video card installed in the PCI-Express 16 slot. Is this possible? I'd like to run the workstation dual-head.

    The board will detect a video card in the pci-e 16x slot and auto-disable the onboard video to avoid conflicts. Apparently , there is no way to manually enable the onboard video while a card is present.

  • Cisco Meeting Place Express 2.0 Exchange Server Configuration error.

    Hi
    I have Cisco Meeting  Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat)  as base operation system.
    v\:* {behavior:url(#default#VML);}
    o\:* {behavior:url(#default#VML);}
    w\:* {behavior:url(#default#VML);}
    .shape {behavior:url(#default#VML);}
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Обычная таблица";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";}
    I have a problem with Cisco Meeting Place Express and Exchange Server synchronizing.
    The Cisco Meeting Place Settings are
    Exchange Server
    Hostname *
    Language* de_DE en_AU en_GB en_US fr_CA fr_FR
    SSL   enabled * true false
    Cisco Unified MeetingPlace Express   Mailbox Account
    Windows   domain *
    Username *
    Password *
    Password   confirm *
    E-mail   address *
    Mailbox   maintenance interval (days) *
    Mailbox   maintenance cutover (days) *
    When I type the button test, I receive “Authentication error. Check the authenticated access to the Exchange Server for Microsoft NTLM authentication scheme.”
    My Exchange Server is synchronized with MS Active Directory. As far as I know, Kerberous is used for authentication. So, how can I enable NTLM authentication scheme on AD? Are there any other options for Cisco MPE and Exchange synchronization?
    Thanks for help
    Sincerely yours
    Sergey Bondarenko

    st1\:*{behavior:url(#ieooui) }
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Обычная таблица";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";}
    Thanks a lot.
    I have corrected domain name in configuration after your advice. Cisco MPE Exchange Configuration is working very well now. I’m able to start a meeting from the outlook calendar and send messages to meeting participants.
    Thank you very march for your assistance!
    Sincerely yours
    Sergey Bondarenko

  • Video Conferencing Systems vs Basic IP Cameras

    Hello all,
    I am new to video over IP technologies.
    We need a system where 2 or 3 people can basically talk to each other (Audio/Video).
    A vendor is trying to steer us into purchasing a high priced video conferencing system, although I do not see the difference between a video conferencing "system" and some IP Cameras. As long as the people can see each other (through a web browser, or other method) and the cameras are of high quality, what's the difference between a IP Camera "system" and a Video Conferencing "system"?
    Thanks

    Well the question is how are you going to do conferencing with "just some IP cameras"? In its simplest form you need some type of application to do video conferencing. Smmething like Yahoo IM, AOL IM, Windows Messenger, NetMeeting, etc. These applictions tend to allow one-on one video conferncing but some are getting better. Even with apps as old as Netmeeting you could have more than 2 people on a call but you could only ever see 2 people at once at the most. Not sure about some of the new versions of IM clients though.
    In general you need an MCU (Multi-point Conference Unit) in order to have true multi-party conferencing.
    These units will allow everyone to see everyone else at the same time (within space constraints offered by the size of the monitor).
    There are plenty of (relatively) inexpensive MCUs out there and a vast array of features. I don't think the vendor is steering you in the wrong direction. The only problem is determining if an MCU is overkill or not. Perhaps using an IM client app might be enough for your needs.
    Hope this helps.
    Please remember to rate all replies

  • Video Conferencing Training Courses

    Hello all,
    Does anybody know of any school or training center that offers training on video conferencing ? I am interested in learning how to design and implement video conferencing solutions.
    thanks very much in advance !!!
    Danny

    Is a course on the CCO PEC Partner E-learning Connection.
    I have a general document, if you still need it let me know, I can shared with you.
    Cheers

  • How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

    Hi
    I have  Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
    Thanks in advance!!!
    Sincerely yours
    Sergey Bondarenko

    Hi
    Thanks for your attention for my humble problem.
    I have performed Meeting Place Express configuration through the “net” command.
    But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
    Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of  cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
    Have you any idea?
    A lot of thanks in advance!!
    Sincerely yours Sergey Bondarenko
    Here I have printed the net configuration output of Cisco meeting Place Express:
    [root@cumpxvoice root]# net
    This is the MeetingPlace Express network configuration utility.
    Up to the point where you save changes, it is safe to hit ^C to get
    out at any time, in which case nothing will have changed.
    1) List current configuration
    2) Configure Ethernet port 1
    3) Configure Ethernet port 2
    4) Configure service bindings
    5) Set host names
    6) Set domain name
    7) Configure DNS service
    8) Configure NTP service
    9) Configure routing
    10) Done
    Select: 1
    Primary/audio host name: cumpxvoice
    HTTP host name:          cumpxvoice
    RTMP host name:          cumpxweb
    Domain name:             uclab.com
    Service bindings:
    Audio:                   port 1 (eth0)
    Web browsing (HTTP):     port 1 (eth0)
    Web conferencing (RTMP): port 2 (eth1)
    Port 1 (device eth0):
    IP Address:      10.62.60.116
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Port 2 (device eth1):
    IP Address:      10.62.60.117
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Static routes:
    Destination      Gateway          Network mask     Port
    0.0.0.0          10.62.60.1       0.0.0.0          1
    DNS Servers:
    10.62.60.115
    10.0.1.4

  • I work for a teaching hospital. We are using groups of 20 to 30 iPads for access to patient electronic records, video conferencing software, and other, HIPPA compliant apps. I need to be able to access the iPads to shut down and erase in case of loss.

    I work for a teaching hospital. I have started a program to place Physicians and key support personnel on iPads for electonic medical records, video conferencing software, and other HIPPA compliant issue. I have a need to have one central program that can push out updates, other information, but most importantly, can erase the iPad in cases of loss or stolen. Can anyone direct me to such software.
    Thanks,
    Wayne Hodges

    The Mac mini does have somewhat powerful specs at top end.
    Mac mini with OS X Server features a 2.3GHz quad-core Intel Core i7 processor that delivers incredible speed and performance, thanks to innovations like Turbo Boost 2.0, Hyper-Threading, and an integrated memory controller. Add in 6MB of L3 cache, and you’ll find that Mac mini with OS X Server is packed with power.
    http://www.apple.com/mac-mini/server/
    Here is  a list of  mdm's:
    MDMs
    Airwatch, Meraki, MobileIron, OS X Server, or Zenprise
    Airwatch
      http://www.air-watch.com/
    Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
      http://www.meraki.com/products/systems-manager/
      https://discussions.apple.com/thread/4067210?tstart=0
      Good howto by Sergio Sosa.
      https://discussions.apple.com/thread/2594001?start=15&tstart=0
    MobileIron
      http://www.mobileiron.com/
    Zenprise
      http://www.zenprise.com/

  • Video conferencing and SIP URI setup

    I am new to Cisco's video products and am trying to configure them for some simple video conferencing. I currently have the following in our environment:
    CUCM v7.1.5
    VCS X7.2.1
    TMS v14.1.0
    MCU 5320 v4.3(2.17)
    EX90 vTC5.1.2
    I am also new to SIP URI dialing. I have done some base configuration on my VCS, TMS, and MCU, following the installation and configuration guide. What I am struggling with is what I need in order to set up the SIP URI info for the EX90. Does there need to be an AD account configured that has a sip directory value? Or can I just use whatever SIP address I want as long as the domain matches what I put in the VCS for the domain and allow list?
    I followed the following guides:
    TMS
    http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/install_guide/Cisco_TMS_install_guide_14-1.pdf
    VCS
    http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/install_guide/Cisco_VCS_Getting_Started_X7-2.pdf
    http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Basic_Configuration_Single_VCS_Control_Deployment_Guide_X7-2.pdf
    MCU
    http://www.cisco.com/en/US/docs/telepresence/infrastructure/mcu/install_guide/Cisco_TelePresence_MCU_5300_Series_Getting_started.pdf
    VCS & CUCM Call routing
    http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf
    Any assistance and understanding that can be shared would be greatly appreciated!
    Thanks in advance,
    Mr. A little confused - Arras V. Martin

    Hi Arras.  Good morning.  I'm going to hopefully answer some of your questions you have here.  You also may find that the Telepresense Community on the Support Forums is a great place to post this as well. 
    First, I would recomment to you to update from TMS 14.1 to TMS 14.1.1.  There was a major scheduling bug in this release, and had to be removed and updated with TMS 14.1.1.  I would start by updating TMS to that version. 
    CUCM 7.1.5 is a bit older release.  There are some nuasances with this version that have been fixed in 8.6.2 CUCM.  Also, if running 8.5 CUCM or higher, you can add this to TMS and manage TP endpoints on CUCM via this version.  So if you have CTS endpoints or EX, MX and C-series registered to CUCM, you can manage and schedule those units in TMS. 
    Q -Does there need to be an AD account configured that has a sip directory value?
    A - If you add the device in TMS and have it registered to VCS as SIP, you can configure the SIP URI field to whatever SIP URI you wish to assign to the system.  As long as the domain you specify is part of VCS domain and your allow list pattern or rule is ok, the system should register just fine. 
    If you running SIP only environment, you can always restrict bookings in TMS to allow SIP only if this is what your gearing towards. 
    Hope this helps you out a bit.  Feel free to post any more questions here you may have and will do my best to get those answered for ya.
    VR
    Patrick

  • Video conferencing, tele conferencing and chat in jsp

    Hi,
    I have to add a module in my jsp project, module is for video conferencing, tele conferencing and chat.
    Can any body suggest me that what should I use for that like flash or something else?
    Waiting for the response.
    Thanks
    Gaurav Agrawal

    gauravjlj wrote:
    I think, I got your point.
    You are saying that Java Web Start are using to install client applications remotely. Am I right?Basically, yes.
    and these applications can be developed in AWT/Swing or Applet.Yes.
    But my concern is different.
    I need a web application, that means application will be running on the web server and more than 1 clients will access this via the http URL. ..This is equally easy for either an embedded applet or an app. launched using JWS. So long as the server-side component of the teleconferencing is at the same site that served the app., either can access it while in a sand-box. If the server-side component is at a different site, either type would need to be digitally signed, and trusted.
    ..I don't have to install the application to each client separately. .. OK - not for the server-side component, but for the client-side component, it sure does need to be installed if it is either an embedded applet or a JWS app. The only real difference is that for some people, downloading an applet is not seen as 'installing' software, though in reality it is. An applet must be cached on the client-side before the code is invoked to make the applet appear in the web page. Where JWS provides a better user experience than applets though, is that the browser (and JRE) cache might be cleared (effectively 'uninstalling' the applet), by things outside Java's control (such as the user clearing the browser's cache using the browser's own controls).
    ..so I need the video and audio conferencing in this application itselt. it will be like a website.
    so please tell me, what I have to do?I am still not convinced that this needs to be, or will provide a better user experience as, an applet. But let's put that thought aside for the moment.
    Can you do this video conferencing using the cross-platform version of the JMF? The cross-platform version of JMF does not support as many formats(1) as the JMF performance pack - and you might find that the PP version supports some formats that offer better compression than the x-plat version is able to handle. Note that this can be tested once you have the server-side component in place - it is pretty much the same for an applet, JWS app., or plain old desktop app. such as JMStudio (provided as a sample app. with JMF) to access the web service that provides the video feed.
    1) [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/formats.html].

  • Video conferencing in training and event management.

    Hello experts,
    My client wants to configure the video conferencing facility in the training and event management module. Can somebody advice me on that part as in how to do so?
    Thanks and Regards,
    Kanika Talwar.

    Hi
    In Table V_T77TNM_DC
    We need to have the below entries
    TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
    TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
    TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
    TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
    Regards
    Kenu

  • What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

    Hi All,
    What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
    Client Type
    Port range  and Protocol required for Audio
    Port range and Protocol required for
    Video
    Port range and Protocol required for
    A/Vconferencing
    Windows Desktop   Client
    Windows mobile App
    Iphone
    Ipad
    Andriod phone
    Andriod Tablet
    MAC desktop client
    Please advise. Many Thanks.

    Out of the box, 1024-65535 for all of the client ports.  :) 
    https://technet.microsoft.com/en-us/library/gg398833.aspx
    You'll want to tune your client ports a bit
    https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings.  I'm not sure the mobile clients respect that setting.
    Elan's got the best writeup for Windows clients here:
    http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
    However, the marking of the packets is the tricky part.  Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings.  You have to do it based on ports
    as the traffic could be peer to peer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized, 0 access denied, 1 unknown.  How do I solve this problem? The video is on my desktop it's an mpg.

    Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized. 0 access denied, 1 unknown. How do I solve this problem?  The video is on my desktop and it's an mpg file. Please help me 

    Get a copy of MPEG Streamclip and convert your MPG file to QuickTime/Apple Intermediate Codec (AIC).  In FCE, select one of the setups that uses AIC that best matches your clip (say, 1920x1080i60).  Create a new sequence, then import the converted file.
    Note that if your MPG file is actually MPEG2 you will also need the QuickTime MPEG2 Component in addition to MPEG Streamclip. 
    What was the source of the MPG file?  How about if you open it in QuickTime, then do Window > Show Movie Inspector.  Tell us what it says for codec/compression, frame size & frame rate.

  • Guides, cropping, scaling and accurate video placement

    I'm disappointed with the apparent lack of tools to accurately place videos (pip) within a 1080p (or otherwise) sequence.
    I have a 1080p sequence, and four 720p videos that I want to crop and then scale and position to fit each quadrant of the final video - each PiP would be exactly 960x540 pixels.
    The crop effect is ok, but doesn't show you "pixel" units, only %. The Motion effect does show pixels but positions everything relative to the centre of the original video (after scaling)
    I would have expected the crop effect to change the bounding box of the video and maybe the ability to precisely define the size in pixels and zoom in percentage but no....
    Not that this matters of course because there are no "rulers" / "guides" or otherwise to snap to anyway so positioning would still be a pain.
    According to similar posts on the forum you can make "image based transparent guides" but these don't offer the ability to snap videos in place either and I like being precise - dragging stuff around on the screen by eye doesn't fill me with warm fuzzy feelings.
    I've worked around this issue using basic maths (essentially since I'm cropping to 1/2 the original videos dimensions I set the scale to 150% and just calculate the positional offsets using 1920*(0.5-%crop) and 1080*(0.5-%crop) and then adding multiples of 1920/2 and 1080/2 to define which quadrant I want the video in.
    Surely there must be a better way, rather than resorting to pen and paper?

    Then the track matte would come in.
    With a matte you can pick out any section of the frame.
    nest it.
    Set anchor point exactly on the top left corner of the visibel frame.
    Now you can positon the pip like in post 5.

Maybe you are looking for

  • Strange RowSetIterator Issue

    Hi Can anyone help with this little problem I have a delete iterator in the following code, but it's deleting one less than the number of records it should do. Code is: int errorCount = this.getErrorsPOVO_Headers().getFetchedRowCount(); RowSetIterato

  • Peremiere Pro CC import issue while importing XDCAM 422 50 MXF file

    Hi I also posted into the german board, but got no reply - so now I'm gonna try it in the international board too: I want to import XDCAM HD 422 50 footage into Adobe Premiere Pro CC. It's the current version. The footage was recorded with a Sony PDW

  • Upgrade from PC version of Logic 5 Gold?

    I was one of the unfortunate people who bought Logic 5 Gold a few weeks before Apple bought Emagic and promptly announced that the PC version would be discontinued. Now that I'm a Mac owner I'd quite like to upgrade to Logic 8. Does the upgrade versi

  • Can I write in the layout  in any Key figure something else then number ?

    Hi (sem - bps) Can I write in the layout  in any Key figure something else then number ? Let say I want to right in the key figure number with CHAR (the letters a-z) Can I do so ? Can a key figure  has char other then number ?

  • Incompleteness Check for Opportunity

    Hi all, Client requirement to force an employee to enter a product while he/she creating an opportunity. Could you any one suggest me which Badi can i use to create a filed name Product. we are having the                   Object name -- OPPOR_H