Meeting Attendees get error message 'Meeting has not yet started'

Hi All
I am able to start a meeting but not having any luck with attendees joining. Have had no problems til a couple of weeks ago? Is it cause I am still running CS4?

Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac.

Similar Messages

I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

One thing that might help.
1. open itunes preferences from the edit menu and click on the devices tab.
2. check the box to disable syncing for iphones connected to itunes and click ok.
3. Then click the button to reset sync history.
4. Now click ok to close the preferences window.
5. connect the iphone to itunes and go to the info tab.
6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
7. then click apply on the bottom right of itunes.
This will overwrite any events on the iphone, including any events that has become corrupted.
Hope this helps

In MIRO i am getting error message " vendor is not invoicing party in STO

Dear All,
i create one STO MM. This is plant to plant transfer STO. i entered few conditions. for this conditions i mentioned Vendor in condition detail.
at the time of MIRO i am getting error message vendor is not invoicing party in PO ( STO).
i checked the vendo master. all partner function are maintained.
so please guide me
Thanks
h shah

HI,
Check u had done the below steps,
Create STO and input the freight/delivery costs in PO and assign the Transporter or Freight Vendor to the conditions by clicking on "Details" button in Conditions Tab
For that you have to do following settings;
Go to SPRO > MM > Purchasing > Purchase Order > Define Document Types > Here select "UB" and copy to a new PO Doc type.
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (New One) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08
After STO, do Outbound delivery in VL10D, then GR in MIGO and then go for LIV w.r.t. STO in MIRO
Here select "Planned Delivery Cost" and do necessary procedure.
Regards
KK

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

HT201210 im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

Hey santhosh.pv,
We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Cheers,
David

When trying to sign into the Itunes Store I get error message "Itunes store not available at this time- please try again later". I've updated everything and still can't get in. Any ideas??

When trying to sing into the Itunes Store I get error message "Itunes store not availble at this time. Please try again later" I've updated everything and doesn't help. Anyone have any ideas?

Send a PM(Private Message) to ATT Uverse Care.

Trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings

trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings. What am I to do?

The storage you purchased is in the cloud, and doesn't do anything with your pad. Your problem is simply that you have too much content on your pad. Go to settings, general, usage, and it will show you how much space you have avaliable on your pad. If you let the screen sit for a while, all the apps will be displayed, and you can see how much stuff you have associated with each.
You have to no option but to delete some of the content on your pad. Videos, comics, pitcures and some music files use a lot of space. The cloud allows you to leave stuff there, so you can get it when you need it.

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Continue to get error message "backup could not be completed" after purchasing additional storage

continue to get error message "backup could not be completed" after purchasing additional storage

Just wanted to update the community on my exciting adventure to fix my ipad;
I made my way over to the Apple Store here in South Florida and had my appointment with the geniuses. No one could figure this sucker out! They did every thing they could think of to the ipad without success. Couldn't even tell me what the problem was. All were very nice about it, of course. I was told to wait a day while they contacted the great and powerful central genius(es) but apparently no one was home there since they never responded to the request for help.
Anyway, I will go back to the Apple Store one more time before I give in to the conclusion that my 3 year old iPad (original) is DOA

I am trying to send a text message from my iPad when I enter phone number I get error message phone number not registered with iMessages from contacts

When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.

TestnTag wrote:
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage. The destination device must be registered with the Apple servers by turning on iMessage. Therefore, the user with the iPhone must enable it for iMessage.

HT201299 Verizon signal is strong but get error message "Ipad is not connected to the Internet"   Wireless works but my Verizon account does not

Verizon signal is strong but get error message "Ipad is not connected to the Internet"   When I try to use Safari.
Wireless works but my Verizon account does not

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My 4S keeps asking for my account password, it has my id but won't accept my password, I tried to create a new account but I keep getting "This Apple ID has not yet been used in Game Center.....nothing seems to allow me to enter.

I am unable to play games on my 4S. I keep getting this Apple ID has not yet been used in Game Center, I can't even create a new account....nothing I try seems to work.

Try start a game with Game Center feature and create a account this way.

RGM has not yet started

when i use scrgadm to add a resource group ,it says "RGM has not yet started".
why?
# scrgadm -a -g oracle-rg -h E4500,b150
RGM has not yet started
# ps -ef |grep rgm
root 348 300 0 17:43:22 ? 0:00 /sbin/sh /etc/rc3.d/S29initrgm start
root 357 348 0 17:43:22 ? 0:00 /usr/cluster/lib/sc/rgmd
root 2111 392 0 19:00:36 pts/2 0:00 grep rgm
# scconf -p
Cluster name: sc_ora
Cluster ID: 0x3E9A1BA2
Cluster install mode: disabled
Cluster private net: 172.16.0.0
Cluster private netmask: 255.255.0.0
Cluster new node authentication: unix
Cluster new node list: <. - Exclude all nodes>
Cluster nodes: E4500 b150
Cluster node name: E4500
Node ID: 1
Node enabled: yes
Node private hostname: clusternode1-priv
Node quorum vote count: 1
Node reservation key: 0x3E9A1BA200000001
Node transport adapters: qfe0
Node transport adapter: qfe0
Adapter enabled: yes
Adapter transport type: dlpi
Adapter property: device_name=qfe
Adapter property: device_instance=0
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=10
Adapter property: netmask=255.255.255.128
Adapter property: ip_address=172.16.0.129
Adapter port names: 0
Adapter port: 0
Port enabled: yes
Cluster node name: b150
Node ID: 2
Node enabled: yes
Node private hostname: clusternode2-priv
Node quorum vote count: 1
Node reservation key: 0x3E9A1BA200000002
Node transport adapters: hme0
Node transport adapter: hme0
Adapter enabled: yes
Adapter transport type: dlpi
Adapter property: device_name=hme
Adapter property: device_instance=0
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=10
Adapter property: netmask=255.255.255.128
Adapter property: ip_address=172.16.0.130
Adapter port names: 0
Adapter port: 0
Port enabled: yes
Cluster transport junctions: switch1
Cluster transport junction: switch1
Junction enabled: yes
Junction type: switch
Junction port names: 1 2
Junction port: 1
Port enabled: yes
Junction port: 2
Port enabled: yes
Cluster transport cables
Endpoint Endpoint State
Transport cable: E4500:qfe0@0 switch1@1 Enabled
Transport cable: b150:hme0@0 switch1@2 Enabled
Quorum devices: d3
Quorum device name: d3
Quorum device votes: 1
Quorum device enabled: yes
Quorum device name: /dev/did/rdsk/d3s2
Quorum device hosts (enabled): E4500 b150
Quorum device hosts (disabled):
# scstat
-- Cluster Nodes --
Node name Status
Cluster node: E4500 Online
Cluster node: b150 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: E4500:qfe0 b150:hme0 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: E4500 1 1 Online
Node votes: b150 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status Owner
Device votes: /dev/did/rdsk/d3s2 1 1 Online E4500
-- Device Group Servers --
Device Group Primary Secondary
-- Device Group Status --
Device Group Status
#

# ps -ef |grep rgm
root 348 300 0 17:43:22 ? 0:00:00 /sbin/sh /etc/rc3.d/S29initrgm start...this should not still be running - it shows there is some problem with the
startup of rgm
look for messages of type "INITRGM" in the /var/adm/messages log
Node transport adapters:
: qfe0each node should have at least 2 transport adapters!!!
(plus 1 public interface)

How do I apply special effects to a track when I keep getting error message that "Could not find layout Default Reverb GB"?

How do I apply special effects to a track in GarageBand when I keep getting error message that says"Could not find layout Default Reverb GB"?

I go to Applications to see if
GarageBand has changed and dthere is no change, still 1.42GB of file size ‹
no evidence of the 10+ GB that the installer told me I was downloading, no
evidence in my download folder that I downloded anything, and most
important, when I click on ³Effects² I¹m back to the same error message.
I¹ve been at this now for about 3 hours.
Downloading the extra content will take a very long time.
When the download has finished, the prompt for the password will appear and the installer will continue to run in the background.
Let t run. As long as GarageBand is still installing, it will give a warning, when you try to quit.
When you can quit GarageBand without a warning, restart your Mac.
The size of the GarageBand application will not change, but you should be seeing more loops. They are installed in the System Library, and the folder "Library" on your Macintosh HD should by now be 10GB larger.

Meeting Attendees get error message 'Meeting has not yet started'

Similar Messages

Maybe you are looking for