Meeting Place 8.0.1.2 and ccm 8.6.2 compatibility confirmation

Hello,
We wish to upgrade our CCM from version 8.0.1 to 8.6.2 which is integrated with meeting place version 8.0.1.2. We have searched for the compatibility on cisco.com and found following two references. We also checked with PDI and they have recommended to use ccm 8.5 or upgrade meeting place to 8.5.
Does anyone have meetingplace 8.0.1.2 and cucm 8.6.2 integrated ?
Note - We have meeting place for audio conference meetings only at the moment. Due to other application requirement we have to upgrade to cucm to 8.6.x.
URL 1 <<----- This states that,
For audio-only installations, you may connect Cisco Unified MeetingPlace to Cisco Unified Communications Manager Release 6.0(3) or later release: this is for Meeting Place 8.0
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_System_Requirements_for_Cisco_Unified_MeetingPlace_Release_8.0#Cisco_Unified_Communications_Manager
URL 2 <<----- This states that,
Component name
Cisco Unified Communications Manager
Component Version
6.1(2) - 8.0
Release Date
Nov. 12, 2007 - Mar. 26, 2010
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Compatibility_Matrix_for_Cisco_Unified_MeetingPlace_Release_8.0
Also, in the compatibility tool , It states that
http://tools.cisco.com/ITDIT/vtgsca/VTGServlet
Goto release -->>8.6->Conferencing ->Cisco Unified MeetingPlace
8.6.(1) compatible version is - Initial  8.5(1).
Thanks,
Shashank

Hi Shashank,
The fact that CUCM 8.6.2 is not specified in the MP8.0 documentation means that MP8.0 hasn’t been officially tested with that version of CUCM, and hence cannot be stated it is officially supported. Since MP8.0 is end of sale, there won’t be any additional testing of this product, and hence CUCM 8.6.x won’t be added to the documentation at any time.
It may work but it is not officially supported by the BU.
Thanks,
Anand
Please rate helpful posts !!

Similar Messages

  • Unable to luanch meeting room(Meeting place 2.x)

    I having some issue with meeting place Web meeting .
    Whenever i join the  web meeting room , i am getting the below error
    System ERROR:
    The meeting Room Couldn't connect to the cisco unified meeting place server,  please re-launch the meeting room or refresh your browser to restore the  connection
    Note:
    I- installed the proper Flash player, presenter adds on software
    2- Browser TEST worked fine
    3- I dont see any firewall rule blocking the connection
    I will really appreciate your help on this issue.
    Regards ,
    Shaijal

    Hello ,
    I got solution for this issue.
    There are two IP address for Meeting place express .
    one for audio and meeting place access.
    second ip is used for Web trafic .In my scenario i havn't done any DNS configuration for
    my second IP.After the proper DNS change it statred working .
    Thanks ,
    Shaijal

  • Cisco meeting place 7 support for lotus notes 8.5.3

    Hi guys,
    Does anyone know if meeting place 7 support for lotus notes 8.5.3 ?
    The template listed on my meeting place is 8.5.2 and I have try to find if we can download new template and then put it on the server, but looks like that's not the case.
    Thanks,
    Vikram

    Update on this, I've also done the procedures of "Patch Cisco Unity for IBM Lotus Notes 8.x Support" &
    "Add the Domino 8.5.x MailFileTmplt Registry Key on the Cisco Unity Server" according to
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/702curelnotes.html#wp593368 but without any luck.
    Any kind soul?
    Rgrds,
    Alex

  • How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

    Hi
    I have  Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
    Thanks in advance!!!
    Sincerely yours
    Sergey Bondarenko

    Hi
    Thanks for your attention for my humble problem.
    I have performed Meeting Place Express configuration through the “net” command.
    But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
    Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of  cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
    Have you any idea?
    A lot of thanks in advance!!
    Sincerely yours Sergey Bondarenko
    Here I have printed the net configuration output of Cisco meeting Place Express:
    [root@cumpxvoice root]# net
    This is the MeetingPlace Express network configuration utility.
    Up to the point where you save changes, it is safe to hit ^C to get
    out at any time, in which case nothing will have changed.
    1) List current configuration
    2) Configure Ethernet port 1
    3) Configure Ethernet port 2
    4) Configure service bindings
    5) Set host names
    6) Set domain name
    7) Configure DNS service
    8) Configure NTP service
    9) Configure routing
    10) Done
    Select: 1
    Primary/audio host name: cumpxvoice
    HTTP host name:          cumpxvoice
    RTMP host name:          cumpxweb
    Domain name:             uclab.com
    Service bindings:
    Audio:                   port 1 (eth0)
    Web browsing (HTTP):     port 1 (eth0)
    Web conferencing (RTMP): port 2 (eth1)
    Port 1 (device eth0):
    IP Address:      10.62.60.116
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Port 2 (device eth1):
    IP Address:      10.62.60.117
    Network mask:    255.255.255.0
    Default gateway: 10.62.60.1
    Link setting:    autoneg on
    Static routes:
    Destination      Gateway          Network mask     Port
    0.0.0.0          10.62.60.1       0.0.0.0          1
    DNS Servers:
    10.62.60.115
    10.0.1.4

  • Need Urgent Help on Meeting Place Integration with CUCM 7.1 and AS5400 PSTN Gateway

    Hi,
    This is first time I am on this forum.
    I have already tried going through a lot of docs on docwiki.cisco.com but couldn't find complete configuration help.
    I have to integrate Meeting Place 8.X with an existing CUCM and an E1 gateway (PSTN Gateway) AS5400.
    The CUCM is already part of a Telepresence Environment. I need to create a SIP trunk between AS5400 and CUCM 7.1 and then create a Trunk between AS5400 and Cisco Unified MP 8.X and then between CUMP and CUCM.
    I need help on AS5400 SIP Configs as well as parameters I need to cover on CUCM (Though I have done some basic dial-peer configs but they haven't been of much help).
    Then I also need help on AS5400 SIP configs with CUMP 8.0
    Any docs on Integration between CUMP and TP3000 will be of great help too.
    Rgds,
    Asim

    I can get the Ricoh to register as sip endpoint, it answeres then imediatly disconnects. Doing a monitor with Wireshark looks like it attempts to negotiate t38 but fails. Any idea why this fails?
    |160.260684000|         INVITE SDP (g711U)            |                   |SIP From:
    |         |(5060)   ------------------>  (5060)   |                   |
    |160.338806000|         INVITE SDP (t38)              |                   |SIP Request
    |         |(5060)   <------------------  (63435)  |                   |
    |160.339545000|         491 Request Pending           |                   |SIP Status
    |         |(5060)   ------------------>  (5060)   |                   |
    |160.547894000|         406 Not Acceptable            |                   |SIP Status
    |         |(5060)   <------------------  (63435)  |                   |

  • Cisco Meeting Place Express 2.1.1.2 and not working anymore

    Hello, we currently have cisco meeting place express 2.1.1.2; however are now having issues with it.  We are unable to dial to the internal extension that was previously working to login to the meetings and only get a busy signal everytime. Furthermore, whenever someone tries to schedule a new meeting via the web form, it says "request to server timed out. please try again".
    I tried reaching out to Cisco TAC support; however it's no longer a supported item and am looking for assistance here.  The TAC engineer was able to help assist with updating the system clock; however I believe the problems started happening after we updated the clock and rebooted the server.  Now we are unable to schedule and attend any meetings (busy signal everytime) at all.  I tried restarting the server itself as well as via the command line.  I also now see an error during CLI restart, which I have listed directly below:
    Stopping MeetingPlace SNMP/R:                              [  OK  ]
    Stopping mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                               [  OK  ]
    Stopping mpe-tomcat-securewebservices: bash: /root/.bashrc: Permission denied
                                                               [  OK  ]
    Shutting down breeze:                                      [  OK  ]
    Shutting down fmsmaster:                                   [  OK  ]
    Shutting down fmsadmin:                                    [  OK  ]
    Stopping MeetingPlace application: /etc/init.d/mpx_app: line 264:  4955 Segmentation fault      (core dumped) ${shutdown_bin} ${shutdown_arg_1} ${shutdown_arg_2} ${shutdown_arg_3} >>${non_verbose_shutdown_output} 2>&1
                                                               [FAILED]
        ERROR: returncode = 139
    Stopping MeetingPlace License Manager:                     [  OK  ]
    Stopping MeetingPlace database:                            [  OK  ]
    Stopping MeetingPlace Java RMI: Shutting down RMI Registry:
                                                               [  OK  ]
    Stopping Cisco MeetingPlace Express:                       [  OK  ]
    Starting MeetingPlace Java RMI: Starting RMI Registry:
    starting daemon
    mpxadmin
                                                               [  OK  ]
    Starting MeetingPlace database:                            [  OK  ]
    Starting MeetingPlace License Manager:                     [  OK  ]
    Starting MeetingPlace application:                         [  OK  ]
        already running
    Starting breeze:                                           [  OK  ]
    Starting fmsmaster:                                        [  OK  ]
    Starting fmsadmin:                                         [  OK  ]
    Starting mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                               [  OK  ]
    Both the admin and user web interfaces work on the home pages, but can't seem to schedule any new meetings or login to any existing ones, with busy signal as well. Anyone have any ideas? We need assistance with this ASAP since it's our voice collaboration solution.  Thanks in advance for any help.                  

    Amlesh,
    Here is the pertinent output:
    /common/log/taos-log-a/core/core.1947.11.ConfSchd.1183266069
    /common/log/taos-log-a/core/core.1837.6.gyromain.bin.1183266161
    /common/log/taos-log-a/core/core.1859.6.cpgs.1183266206
    /common/log/taos-log-a/core/core.1951.11.ConfSchd.1184475669
    /common/log/taos-log-a/core/core.1946.11.ConfSchd.1185685269
    /common/log/taos-log-a/core/core.1836.6.gyromain.bin.1185685332
    /common/log/taos-log-a/core/core.1880.6.cca.1185685452
    /common/log/taos-log-a/core/core.1858.6.cpgs.1185685452
    /common/log/taos-log-a/core/core.1950.11.ConfSchd.1185771671
    /common/log/taos-log-a/core/core.1863.6.cpgs.1185771865
    /common/log/taos-log-a/core/core.1884.6.cca.1185771865
    /common/log/taos-log-a/core/core.1991.6.nmpagent.1185771865
    /common/log/taos-log-a/core/core.1950.11.ConfSchd.1185858067
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1188018079
    /common/log/taos-log-a/core/core.1969.11.ConfSchd.1188190869
    /common/log/taos-log-a/core/core.2008.6.vui.1188190988
    /common/log/taos-log-a/core/core.2029.6.nmpagent.1188190988
    /common/log/taos-log-a/core/core.1998.6.poclient.1188190988
    /common/log/taos-log-a/core/core.1970.11.ConfSchd.1189227671
    /common/log/taos-log-a/core/core.1862.6.gyromain.bin.1189227762
    /common/log/taos-log-a/core/core.1883.6.cpgs.1189227807
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1189918866
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1190005281
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1190178068
    /common/log/taos-log-a/core/core.1886.6.cca.1190178237
    /common/log/taos-log-a/core/core.2012.6.nmpagent.1190178237
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1191906070
    /common/log/taos-log-a/core/core.1843.6.gyromain.bin.1191906162
    /common/log/taos-log-a/core/core.1886.6.cca.1191906248
    /common/log/taos-log-a/core/core.1865.6.cpgs.1191906248
    /common/log/taos-log-a/core/core.1950.11.ConfSchd.1192424479
    /common/log/taos-log-a/core/core.1842.6.gyromain.bin.1192424571
    /common/log/taos-log-a/core/core.1863.6.cpgs.1192424613
    /common/log/taos-log-a/core/core.1951.11.ConfSchd.1192597270
    /common/log/taos-log-a/core/core.1969.11.ConfSchd.1192683669
    /common/log/taos-log-a/core/core.1903.6.cca.1192683817
    /common/log/taos-log-a/core/core.1951.11.ConfSchd.1193029270
    /common/log/taos-log-a/core/core.1842.6.gyromain.bin.1193029360
    /common/log/taos-log-a/core/core.1864.6.cpgs.1193029400
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1193720467
    /common/log/taos-log-a/core/core.1843.6.gyromain.bin.1193720565
    /common/log/taos-log-a/core/core.1864.6.cpgs.1193720610
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1195452071
    /common/log/taos-log-a/core/core.1843.6.gyromain.bin.1195452170
    /common/log/taos-log-a/core/core.1864.6.cpgs.1195452213
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1196834481
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1197007273
    /common/log/taos-log-a/core/core.1842.6.gyromain.bin.1197007371
    /common/log/taos-log-a/core/core.1864.6.cpgs.1197007413
    /common/log/taos-log-a/core/core.1952.11.ConfSchd.1198044080
    /common/log/taos-log-a/core/core.1843.6.gyromain.bin.1198044184
    /common/log/taos-log-a/core/core.1842.6.gyromain.bin.1199858530
    My understanding is these core files are crash dumps and are safe to delete?
    Jared

  • Meeting Place 8.0 - Mute and Unmute Particular Participant

    Hi,
    I have setup of Meeting place 8.0 Application Server (Express Media Server) and Web Server 8.0
    Problem is when Meeting Chairperson (host), who schedules a meeting, can't Mute/ unmute other attendees (Particular Ones) in same meeting (Act as a moderator).
    Now, If we provide Attendant privilege to the host, we gets those rights to Mute and Unmute of that meeting As well As all the other meetings running(which is an problem).
    Can we have a meeting Chairperson with Mute/ Unmute access (Particular Ones) for only meeting which has been hosted by him.
    Please provide some valuable inputs on the same.
    Thanks & Regards,
    Ashish Bagla

    Hi Ashish,
    If you have MeetingPlace Audio only solution, from telephone user interface there is no possible way to mute individual participants. You, as a host, can mute only all participants, and then individual participants can unmute themselves if they want to say something.
    The only other alternative is to use Conference Manager. However, to be able to use this tool, the user/host has to be either Attendant or System Administrator type of user.
    More about Conference Manager you can find here:
    1. How to install Conference Manager:
    http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Installing_MeetingPlace_Conference_Manager
    2. How to use Conference Manager:
    http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Using_MeetingPlace_Conference_Manager
    I hope this will help.
    -Dejan

  • Meeting place and SRST feature

    Hi all,
    I am new to Voice communication. So, i need help from you guys.
    One of my customer one to have cisco Meeting place express on their premises. Basic requirement is -
    i) Voice, video and document sharing
    ii) PSTN and PABX integration with the solution [SRST feature]
    Can you share design and BoM?
    Thanks i advance.
    Russell

    MeetingPlace Express is end of sale and cannot be ordered any longer.
    Also, this is not the correct channel for sales/BoM assistance. You need to work with Cisco Presales assistance and/or your Cisco AM if you require assistance on that front.

  • Meeting place 7.0 compatibility C20 and Movi.

    Hi,
    I need your help to know if the C20 and Movi devices is compatibility to works with meeting place 7.0. I've checked the cisco documentation and this devices has not been tested with this version.
    Anybody knows if it's can working?
    Regards

    @Radim Mutina.
    Yes, like I said before, must read carefully the guidance (docwiki.cisco.com)
    If You don't read carefully guidance, it's look similar   only 1 word different
    I face this problem almost 3 days and I almost gave up, want to open TAC
    But, finally I found a needle in a stack of hay
    Thank You, for rate Me up

  • Meeting place express and Windows 7 compatibility

    I wonder if someone already tried to use Meeting place Express 2.0 with clients that are using Windows 7 OS? If so I wonder if there are some compatibility issues?
    Regards

    At least with the 2.1.1.2 hotfix 36 version (last and highly recommended patch) of the product the Outlook plugin appears to work with Windows 7 32bit and Office 2007. It's getting increasingly touchy as Microsoft patches things and totally bombs in Office 2010 if you have the 64bit version.
    The Adobe Breeze interface seems to function without issue, even in the 64bit OS.

  • Meeting Place MCU CCM

    Hi, I have configured the videoconference beetween the Cisco IP Phones registered in the Cisco Call Manager version 5, I have the MCU3545 for the videoconference, thats work fine. And would like integrate the Cisco meeting place ? How can I start? What do I need?

    Hi Shashank,
    The fact that CUCM 8.6.2 is not specified in the MP8.0 documentation means that MP8.0 hasn’t been officially tested with that version of CUCM, and hence cannot be stated it is officially supported. Since MP8.0 is end of sale, there won’t be any additional testing of this product, and hence CUCM 8.6.x won’t be added to the documentation at any time.
    It may work but it is not officially supported by the BU.
    Thanks,
    Anand
    Please rate helpful posts !!

  • Meeting Place 8 and MS outlook

    Hi,
    I have Meeting place 8 and i have installed application server S/W, i need to let the users schedule meeting from the outlook, shall i have to install the web server S/W or application server S/W is enough

    Hi,
    I am getting error again and again disk not detected where it is looking for cisco unified communications DVD. I did not had any trouble with Webexnode.
    And answer to your question is yes you need Webserver from Scheduling but cisco recommends use webx scheduling with MP8.
    Regards

  • Cisco Meeting Place and Unity

    Can anyone tell me where I can find a good book on how to administer Cisco meeting Place and Unity? Thanks.

    This works on your voice network.  There is a centralized server usually located in the same location as your CUCM with a SIP connection between the two.  Bandwidth requirements are the same as a phone call. If you are using G.711, then 60K+ per call. Each participant calls into the system on either an internal number or on a PSTN line with a dedicated phone number(s). The enter the meeting ID and are in the meeting. Beside scheduled meetings reservationless is also supported.   The MP Application Server handles managing the voices in a meeting and is the only server required.
    MP runs on specific MCS server listed below and won’t install/be supported on other MCS servers.
    MCS 7845-I3-RC2 Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM
    HP equivalent: DL380-G6 Server, part number AX693A
    MCS 7845-I2-RC2 (end-of-sale 12/09) Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM
    MCS 7845-H2-RC2 (end-of-sale 7/09) Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM
    HP equivalent: DL380-G5 Server, part number 470064-887
    MCS 7835-I3-RC1 Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM
    HP equivalent: DL380-G6 Server, part number AX690A
    Note: The MCS 7835-I3-RC1 does not support multinode deployments.
    The following URL (http://www.cisco.com/en/US/products/sw/ps5664/ps5669/tsd_products_support_series_home.html) is the location of a lot of the MP documentation.
    Hope this helps.
    John

  • Meeting Place and Webex Call Back Failing

    Hi
    Meeting place 8.5 with WebEx scheduling, SIP trunk to CUCM 8.5.
    Calling in using the specified number configured in call manager completes over the SIP trunk however call back from webex fails.
    Error:
    WebEx call back failed; no answer.
    Problem is I never recieve a call. I have enabled Webex call backs in webex.
    Seems like there is an issue on either MP or CUCM.
    Just looking for some ideas as I am stumped.

    This turned out to be a few things:
    1) I needed to configure a SIP proxy to CUCM from meeting place. This was the CUCM IP address and TCP port number.
    2) The SIP trunk security profile needed to be reconfigured for this trunk.
    3) E164 was being used so I created a translation pattern to strip the + for the CSS associated with the RP.
    A few things learned along the way.
    1) The "activity" command ran from a SSH prompt with allow you to simulate a call from meeting place. Option 4, enter the number to dial and "f" for port.
    2) In meeting place - Services -Logs - System Information Capture - Loading the index file and under the  CCA SIP LOG is the error being returned by CUCM. In my case it was Warning: 399 CSLCCM1 "Unable to find a device handler for the request received on port
    3) Command "cptrace" again from the SSH prompt will allow you to view the digits being sent from webex to meeting place.
    I hope this information helps someone...

  • Cisco meeting place 8.0 upgrade media download or PUT and upgrade process?

    Hello all, I have been given the task to upgrade our cisco meeting place sever version 8.0.1.3 on both the app server and web sever.
    We have a valid UCSS and I would like to go to version 8.5 Is this something I can order via PUT or can I download one of the upgrades I see on cisco's website?
    Also I'm a little confused on the upgrade process. I've read another post that I have to export the exsisting data then do a fresh install of 8.5 then import the data..... Is this true?
    Thanks,
    Dan

    Hi Playne,
    It depend what kind of deployment is running right now. Please read this article:
    http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/migrate_matrix.html#wp1031995
    From Release 8
    For complete information on compatibility requirements for Release 8.5, see the Compatibility Matrix for Cisco Unified MeetingPlace Release 8.5 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_device_support_tables_list.html.
    Table 5     Migration Process For Different Deployments From MeetingPlace Release 8.0 
    FROM
    Current System
    TO
    Audio Only
    TO
    MeetingPlace Scheduling
    MeetingPlace-Driven User Management
    TO
    WebEx Scheduling
    MeetingPlace-Driven User Management
    TO
    WebEx Scheduling
    WebEx-Driven User Management
    Audio/Video Only
    Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
    Not supported
    Not supported
    Provision a new Cisco WebEx site.
    Migrating Using the MPtoWebEx CSV Converter
    Meetings are not migrated. Keep your existing system to play existing recordings.
    MeetingPlace Scheduling
    WebEx Conferencing
    MeetingPlace-
    driven User Management
    Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
    Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
    As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
    Not supported
    Provision a new Cisco WebEx site.
    Migrating Using the MPtoWebEx CSV Converter
    Meetings are not migrated. Keep your existing system to play existing recordings.
    WebEx Scheduling
    WebEx Conferencing
    MeetingPlace-
    driven User Management
    Not supported
    Not supported
    Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0 module
    As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
    Provision a new Cisco WebEx site.
    Migrating Using the MPtoWebEx CSV Converter
    Meetings are not migrated. Keep your existing system to play existing recordings.
    WebEx Scheduling
    WebEx Conferencing
    Webex-driven User Management
    Not supported
    Not supported
    Not supported
    Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
    As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
    Please remember to rate useful posts clicking on the stars below.
    Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
    LinkedIn Profile: do.linkedin.com/in/leosalcie

Maybe you are looking for

  • Web Service portlet in PDK (Urgent!!!)

    I have a .NET web service I would like to consume in the portal and present as a portlet. For several reason I do not want to use OMNI (not the least of the reasons is after 3 weeks of working with oracle tech support on a corresponding I still can’t

  • Viewing or Running VI or App with Internet Explorer

    I am trying to run an app through HTML without getting a prompt to open or save the file. This is strictly a client based html program and will not need to be used on a web server.

  • Gmail labels: moving mails in Mail Mavericks 10.9

    Mails cannot be moved to a gmail folder with Mail OSX 10.9. At first it seems working correctly, but. After closing Mail the mails are again to be seen in Inbox. I am using a Gmail account with labels using them as folders. I normaly move the mails w

  • Can I transfer iTunes music from my iPad to a Kindle Fire?

    Can anyone tell me how I can transfer purchased iTunes music from an iPad mini to a kindle fire?

  • Procedure for Killing sessions

    Hi All, Almost everyday we have requirement to kill user sessions for dev user, I'm thinking to create a procedure for this and grant to the users so that they can kill it by themself. Below is the what I got from Ask Tom forum, however appreciate if