Meeting place 8.5.1 WebEx deployment and recording audio calls
Have MeetingPlace 8.5.1 application server (Web Ex deployment model -- 1 server) and we need to record our audio calls and that option displays error.
I looked over docs and configuration guidelines, and see no recording options on our config pages for users/user groups like the documentation states to enable this.
Do I need a audiorecording license, and if so, is the WebEx deployment model the correct model to work with recording? The cisco docs on this are not very clear and I haven't found a document that really lists/compares every feature available for each deployment model. The documents that mention audiorecording license talk about an Audio server or meetingplace deployment.
Thanks, Erick
I have this working now, I had to add a 1- to the access number so it was 1-XXX-XXX-XXXX on the Meeting Place web ex configuration page then redo the Webex configuratin setup.
Similar Messages
-
Question in Cisco Unified Meeting Place 8.5 with Webex integration
Greetings,
Let us say that I have the following requirements for fresh installation:
UCS C210-M2
CUWL-Pro for users (700 users)
CUCM 8.6
Cisco unified Meeting Place 8.5
My concern is about Meeting place; one of the requirments is to order Meeting Place 8.5 for local (on-premises) audio conferencing, and use Cisco Webex (cloud) for Web & Video conferencing.
I have the following questions:
- What part numbers should be ordered for meeting place and Webex?
- CUWL-Pro comes with Webex ports included, can use those ports?
Thanks in advance..Hi Anand,
For MP 8.5 new setup, you don't need a web server. Web server is an optional component only when you are upgrading the system from earlier MP releases.
If you are installing Webex node, it needs to be on a seperate MCS server (however, this is an optional component).
Application server and Express Media Server require only one UCS server if this is single node deployment.
Hardware requirements for application server and Webex node can be found in the following documents:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Hardware_Requirements#Application_Server_Requirements
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Hardware_Requirements#Cisco_WebEx_Node_Requirements
The complete information about MP 8.5 requirements:
http://docwiki.cisco.com/wiki/Category:Planning_for_Cisco_Unified_MeetingPlace_Release_8.5
HTH,
Natasa -
Need Urgent Help on Meeting Place Integration with CUCM 7.1 and AS5400 PSTN Gateway
Hi,
This is first time I am on this forum.
I have already tried going through a lot of docs on docwiki.cisco.com but couldn't find complete configuration help.
I have to integrate Meeting Place 8.X with an existing CUCM and an E1 gateway (PSTN Gateway) AS5400.
The CUCM is already part of a Telepresence Environment. I need to create a SIP trunk between AS5400 and CUCM 7.1 and then create a Trunk between AS5400 and Cisco Unified MP 8.X and then between CUMP and CUCM.
I need help on AS5400 SIP Configs as well as parameters I need to cover on CUCM (Though I have done some basic dial-peer configs but they haven't been of much help).
Then I also need help on AS5400 SIP configs with CUMP 8.0
Any docs on Integration between CUMP and TP3000 will be of great help too.
Rgds,
AsimI can get the Ricoh to register as sip endpoint, it answeres then imediatly disconnects. Doing a monitor with Wireshark looks like it attempts to negotiate t38 but fails. Any idea why this fails?
|160.260684000| INVITE SDP (g711U) | |SIP From:
| |(5060) ------------------> (5060) | |
|160.338806000| INVITE SDP (t38) | |SIP Request
| |(5060) <------------------ (63435) | |
|160.339545000| 491 Request Pending | |SIP Status
| |(5060) ------------------> (5060) | |
|160.547894000| 406 Not Acceptable | |SIP Status
| |(5060) <------------------ (63435) | | -
Cisco Meeting Place Express 2.1.1.2 and not working anymore
Hello, we currently have cisco meeting place express 2.1.1.2; however are now having issues with it. We are unable to dial to the internal extension that was previously working to login to the meetings and only get a busy signal everytime. Furthermore, whenever someone tries to schedule a new meeting via the web form, it says "request to server timed out. please try again".
I tried reaching out to Cisco TAC support; however it's no longer a supported item and am looking for assistance here. The TAC engineer was able to help assist with updating the system clock; however I believe the problems started happening after we updated the clock and rebooted the server. Now we are unable to schedule and attend any meetings (busy signal everytime) at all. I tried restarting the server itself as well as via the command line. I also now see an error during CLI restart, which I have listed directly below:
Stopping MeetingPlace SNMP/R: [ OK ]
Stopping mpe-tomcat-main: bash: /root/.bashrc: Permission denied
[ OK ]
Stopping mpe-tomcat-securewebservices: bash: /root/.bashrc: Permission denied
[ OK ]
Shutting down breeze: [ OK ]
Shutting down fmsmaster: [ OK ]
Shutting down fmsadmin: [ OK ]
Stopping MeetingPlace application: /etc/init.d/mpx_app: line 264: 4955 Segmentation fault (core dumped) ${shutdown_bin} ${shutdown_arg_1} ${shutdown_arg_2} ${shutdown_arg_3} >>${non_verbose_shutdown_output} 2>&1
[FAILED]
ERROR: returncode = 139
Stopping MeetingPlace License Manager: [ OK ]
Stopping MeetingPlace database: [ OK ]
Stopping MeetingPlace Java RMI: Shutting down RMI Registry:
[ OK ]
Stopping Cisco MeetingPlace Express: [ OK ]
Starting MeetingPlace Java RMI: Starting RMI Registry:
starting daemon
mpxadmin
[ OK ]
Starting MeetingPlace database: [ OK ]
Starting MeetingPlace License Manager: [ OK ]
Starting MeetingPlace application: [ OK ]
already running
Starting breeze: [ OK ]
Starting fmsmaster: [ OK ]
Starting fmsadmin: [ OK ]
Starting mpe-tomcat-main: bash: /root/.bashrc: Permission denied
[ OK ]
Both the admin and user web interfaces work on the home pages, but can't seem to schedule any new meetings or login to any existing ones, with busy signal as well. Anyone have any ideas? We need assistance with this ASAP since it's our voice collaboration solution. Thanks in advance for any help.Amlesh,
Here is the pertinent output:
/common/log/taos-log-a/core/core.1947.11.ConfSchd.1183266069
/common/log/taos-log-a/core/core.1837.6.gyromain.bin.1183266161
/common/log/taos-log-a/core/core.1859.6.cpgs.1183266206
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1184475669
/common/log/taos-log-a/core/core.1946.11.ConfSchd.1185685269
/common/log/taos-log-a/core/core.1836.6.gyromain.bin.1185685332
/common/log/taos-log-a/core/core.1880.6.cca.1185685452
/common/log/taos-log-a/core/core.1858.6.cpgs.1185685452
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185771671
/common/log/taos-log-a/core/core.1863.6.cpgs.1185771865
/common/log/taos-log-a/core/core.1884.6.cca.1185771865
/common/log/taos-log-a/core/core.1991.6.nmpagent.1185771865
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185858067
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1188018079
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1188190869
/common/log/taos-log-a/core/core.2008.6.vui.1188190988
/common/log/taos-log-a/core/core.2029.6.nmpagent.1188190988
/common/log/taos-log-a/core/core.1998.6.poclient.1188190988
/common/log/taos-log-a/core/core.1970.11.ConfSchd.1189227671
/common/log/taos-log-a/core/core.1862.6.gyromain.bin.1189227762
/common/log/taos-log-a/core/core.1883.6.cpgs.1189227807
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1189918866
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190005281
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190178068
/common/log/taos-log-a/core/core.1886.6.cca.1190178237
/common/log/taos-log-a/core/core.2012.6.nmpagent.1190178237
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1191906070
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1191906162
/common/log/taos-log-a/core/core.1886.6.cca.1191906248
/common/log/taos-log-a/core/core.1865.6.cpgs.1191906248
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1192424479
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1192424571
/common/log/taos-log-a/core/core.1863.6.cpgs.1192424613
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1192597270
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1192683669
/common/log/taos-log-a/core/core.1903.6.cca.1192683817
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1193029270
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1193029360
/common/log/taos-log-a/core/core.1864.6.cpgs.1193029400
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1193720467
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1193720565
/common/log/taos-log-a/core/core.1864.6.cpgs.1193720610
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1195452071
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1195452170
/common/log/taos-log-a/core/core.1864.6.cpgs.1195452213
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1196834481
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1197007273
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1197007371
/common/log/taos-log-a/core/core.1864.6.cpgs.1197007413
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1198044080
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1198044184
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1199858530
My understanding is these core files are crash dumps and are safe to delete?
Jared -
Notes App That Can Import Word Docs and Record Audio
I have Pages now which you can import Word docs to.
I have another app that can record audio and take notes, but you can't import documents.
Is there an app that does both? Import Word docs that I can edit and then also record audio at the same time?
Thanks!!Yes you can use Pages for Word documents and transfer the files as Word documents to iTunes and then to your desktop via file sharing. I use it. Frankly I haven't paid attention to any of the spell check features at all so I can't say for sure that it will work the way that you want it to work.
From everything that I have read about Pages v Documents to Go, I was under the impression that Docs to Go was the much better choice for all around compatibility with Word files. Actually, Pages has some issues going from Pages on the iPad to Pages on the Mac in terms of compatibility and formatting. -
SWF Preview and recording audio
In Captivate 6, I inserted a recording slide in my project without narration. Now, I need to record the audio to the slide. When I open the audio recording window and check the box to enable the SWF preview, the preview begins playing automatically, making it impossible for me to record the audio in sync with the demonstration. I watched a tutorial of a gentleman using this feature, and his playback did not begin playing until his recording began. Is there a setting that configured improperly that I can't find, or something else? Thank you!
Hi lazylecturer
No, as far as I know it isn't possible to accomplish what you
are wanting. Not if you simply imported the PowerPoint and went
from there. You might try this approach if you are using Captivate
3. Set PowerPoint up to play in a window and adjust the size to
what you wish to see in Captivate. Then launch Captivate and record
using the full motion option. The full motion option was improved
in Captivate 3 so as to accommodate longer recordings.
Cheers... Rick -
Pointing and recording audio simultaneously
Hi,
I create "lectures" by basically importing PowerPoint slides
into Captivate and then recording audio.
I would like to point (with the cursor, for example, or even
highlight) specific words, equations or regions in the slide while
I am recording the audio. I know I can first record audio and then
include all types of effects (edit) later on, but that takes more
time. Is it possible to "save" cursor movements while recording
audio with Captivate? I do not want to use a screencasting software
for doing that because of the larger file size it would generate.
Thanks,Hi lazylecturer
No, as far as I know it isn't possible to accomplish what you
are wanting. Not if you simply imported the PowerPoint and went
from there. You might try this approach if you are using Captivate
3. Set PowerPoint up to play in a window and adjust the size to
what you wish to see in Captivate. Then launch Captivate and record
using the full motion option. The full motion option was improved
in Captivate 3 so as to accommodate longer recordings.
Cheers... Rick -
Playback and record Audio Tracks
Dear all,
Maybe a simpel question for you to help me out.
I use Logic Pro 8.
I recorded a song on track 1 and now i want to record vocals on Track 2
Can I play track 1 while recording vocals on track 2?
It doesn't work.
Thanks in advance!!!!It works with me fine, because when I do Audio recording I use headphones so the microphone doesn't pick up what im saying/singing over and over again.
I always hear what I already have on Logic.
Maybe you have to change something in settings or preferences.
TSnail -
How Do I Watch/Preview Movie and Record Audio (voice over) Simultaneously
First.. thank for taking the time to read this post -- much appreciated.
I located another post that someone reported which is almost identical to issue I am experiencing with Garageband. Here is the link
http://discussions.apple.com/thread.jspa?messageID=4741084�
I have attempted to follow through the solution that was provided, however I was unable to successfully resolve the issue.
Essentially, what I would like to do is this. After importing my iMovie project to Garageband, with a use of a Mic, I wish to record a commentary audio track or voice over while I watch my video/movie in the Movie Preview pane from the Track Info window at the same time. I can not rely on the Movie track line as my preview or movie window to watch the movie.
However, for some reason, I can not figure out how I can get the movie preview pane to show/display while I am recording. To help illustrate my problem, I have I posted a video of the issue. Please feel free to view the video and help me understand if this is by-design behavior in GB or a bug or simple 'user error'
http://video.google.ca/videoplay?docid=-3496774833411051076
Appreciate your immediate help
Thank you!
RamiHey Hangtime, give you permission to kick me in the head! I feel stupid now knowing that it is a silly user error. Here I was trying to figure out if its in the 'Details' frame.
In otherwords, 'Detail's is set to '>' and not pointing downwards.
Funny thing is, you would think there would be a scroll bar to move up and down to reveal the Movie Preview frame if the 'Details' pane is expanded in the Track Info window.
In any case... Thanks HT! -
Reading and Recording audio waveforms with SoundBlas
Does any of the Soundblaster hardware or software have the ability to record an audio waveform. Specifically, if I put an audio input into the soundblaster, can it read and recored the waveform's voltage value?
Just in case some one might need it, I solved my problem:
I simply needed to initialize the AudioSession before playing/recording. I did so with the following code:
OSStatus err;
AudioSessionInitialize(NULL, NULL, MyInterruptionListener, self);
UInt32 sessionCategory = kAudioSessionCategory_PlayAndRecord;
err = AudioSessionSetProperty (kAudioSessionProperty_AudioCategory,
sizeof (sessionCategory),
&sessionCategory);
AudioSessionSetActive(TRUE); -
Meeting Place and Webex Call Back Failing
Hi
Meeting place 8.5 with WebEx scheduling, SIP trunk to CUCM 8.5.
Calling in using the specified number configured in call manager completes over the SIP trunk however call back from webex fails.
Error:
WebEx call back failed; no answer.
Problem is I never recieve a call. I have enabled Webex call backs in webex.
Seems like there is an issue on either MP or CUCM.
Just looking for some ideas as I am stumped.This turned out to be a few things:
1) I needed to configure a SIP proxy to CUCM from meeting place. This was the CUCM IP address and TCP port number.
2) The SIP trunk security profile needed to be reconfigured for this trunk.
3) E164 was being used so I created a translation pattern to strip the + for the CSS associated with the RP.
A few things learned along the way.
1) The "activity" command ran from a SSH prompt with allow you to simulate a call from meeting place. Option 4, enter the number to dial and "f" for port.
2) In meeting place - Services -Logs - System Information Capture - Loading the index file and under the CCA SIP LOG is the error being returned by CUCM. In my case it was Warning: 399 CSLCCM1 "Unable to find a device handler for the request received on port
3) Command "cptrace" again from the SSH prompt will allow you to view the digits being sent from webex to meeting place.
I hope this information helps someone... -
Hi,
I am having CCM(8.5) in cluster and meeting place,i have 2 Voice Gateways for my company,Currently Meeting Place runs on 1 Gateway which is used for calling and the other Voice Gateway is also usedfor calling but for other Office in same company,
question is :-The Other Gateway which is used by OTHER OFFICE OF SAME COMPANY CAN IT BE USED FOR CONFIGURING OTHER NUMBER OF MEETING PLACE(as a back up MEEITNG PLACE) number??
Any Help will be appreciatedHi Yogesh,
MP does not perform digit analyisis. In other words, it will honour an INVITE sent to it regardless the number.
Be aware that MP is expected to be deployed on SIP trunk with CUCM.
hth -
Meeting Place 7.0 Audio Blade
Hi - We are installing Meeting Place 7.0.2.14 with an IPVC3515-MCU for Audio/Video blade running software version 5.7.0.0.21.
We can route and web to the IPVC directly, and all status for the MCU/EMP are fine.
When we try to add the MCU under resource management through the Meeting Place Media Server Administration it authenticates and synchs the configuration, however, the MCU status remains as offline under Resource Management. I have tried restarting the IPVC and Meeting Place services as well as deleting and adding the MCU - but it still appears as offline.
Any assistance would be greatly appreciated.
thanks
Brian@Radim Mutina.
Yes, like I said before, must read carefully the guidance (docwiki.cisco.com)
If You don't read carefully guidance, it's look similar only 1 word different
I face this problem almost 3 days and I almost gave up, want to open TAC
But, finally I found a needle in a stack of hay
Thank You, for rate Me up -
Meeting Place 8.5.3.4 - Change Directory Service Configuration
Hi Support Community
We have 3 CUCM clusters version 8.6.2
We have 1 Meeting Place 8.5.3.4 cluster with a primary and standby server
Meeting Place has directory service integration with 1 of the CUCM clusters and performs all user sync and authentication via AXL / LDAP
We now need to change the Meeting Place configuration for AXL server, used for authentication and sync, to another CUCM cluster, this will use exactly the same LDAP search base so all users and details will remain the same in CUCM and therefore we want nothing to change in Meeting Place so all users should remain the same with the same configuration and all meetings should remain the same.
It looks straight forward to change the AXL URL but then we discovered the below from the Meeting Place configuration guide :
" user updates, imports, and deletions are not supported from a redundant Cisco Unified Communications Manager, even if it is integrated with the same LDAP directory as the primary Cisco Unified Communications Manager. This is because Directory Service user updates are tied to a field that is unique to each Cisco Unified Communications Manager server."
So we need to know how we go about changing the directory service configuration to point to another CUCM cluster for authentication and synchronization whilst keeping Meeting Place users and meetings in the Database unchanged.
Any help will be greatly appreciated.
Thanks, Carl RatcliffeHi Carl,
I've just received a final update. If you want to point your Directory Integration to a different CUCM server that is holding the same user database and runs AXL service, you should be able to just change the AXL URL on MP and point to this new server. After this change is made and saved, we recommend restarting services on MeetingPlace (SSH to the server with mpxadmin account, changing to 'root', and running 'mpx_sys restart' command). Once the services are restarted and system comes back up, go to User Configuration > Directory Service > Directory Service Configuration and perform a Full Sync (make sure that Profile Number setting under Profile Number Configuration section is set to New users only in order to avoid any profile # change if any of the user profiles in CUCM was updated in the meantime)
Please, let me know of any questions you might have.
Thank you.
-Dejan -
Recording audio and adding pics
I have an iPhone 4 and I would like to record myself singing a song and put it to pics from my phone without hooking up to a computer. How can I do this? Is there an app for that? I've found ones with will do it to songs on my playlist but not a recording
Hi Comoass,
The application that I would recommend for you would be iMovie. With iMovie, you can create your project and record audio, such as a voiceover, directly into the project. This first link is a general overview of iMovie for iOS.
Apple - iMovie for iOS
http://www.apple.com/ios/imovie/
This link has instructions for moving your pictures into iMovie.
iMovie Help for iPhone: Add video clips and photos from the Camera Roll or Photos app
http://help.apple.com/imovie/iphone/2.0/index.html#knac787725
This link has instructions for adding the audio into your iMovie project.
iMovie Help for iPhone: Add audio
http://help.apple.com/imovie/iphone/2.0/index.html#kna257fc2a9
Thanks for reaching out,
-Joe
Maybe you are looking for
-
Java does not work on my Win 7 IBM-compatible PC using Firefox as my web browser
A typical example of a website I would like to access & view is "www'cut-the-knot.org", a relatively mathematics-related website with a lot a very nice math content, where (roughly estimating) 70-90% of all web pages on the web site use Java applets
-
Satellite A200 does not play DVDs won't play
I'm a first time user on this forum so hello to everyone. My problem is that my (Vista-running) A200 Satellite will not play DVDs. When I try I get the following message: "Windows Media Player cannot play DVD video. You might need to adjust your Wind
-
I experience error - data not found when i click on the custom 'Next' button on the page of my application, whereas, there are records in the table of the database. How can this be resolved? Thank you.
-
package library.client; import javax.naming.InitialContext; import java.awt.BorderLayout; import java.awt.Color; import java.awt.FlowLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.lang.reflect.Method; imp
-
Hello fellow fans of Firefox, I am having a problem with 4.0 when I try to use the identity safe feature in Norton. It will not auto-fill in my set-up password accounts...I have a online business and use multiple sites that have strong passwords and