Meeting Place 8 and MS outlook

Hi,
I have Meeting place 8 and i have installed application server S/W, i need to let the users schedule meeting from the outlook, shall i have to install the web server S/W or application server S/W is enough

Hi,
I am getting error again and again disk not detected where it is looking for cisco unified communications DVD. I did not had any trouble with Webexnode.
And answer to your question is yes you need Webserver from Scheduling but cisco recommends use webx scheduling with MP8.
Regards

Similar Messages

Meeting place express and Windows 7 compatibility

I wonder if someone already tried to use Meeting place Express 2.0 with clients that are using Windows 7 OS? If so I wonder if there are some compatibility issues?
Regards

At least with the 2.1.1.2 hotfix 36 version (last and highly recommended patch) of the product the Outlook plugin appears to work with Windows 7 32bit and Office 2007. It's getting increasingly touchy as Microsoft patches things and totally bombs in Office 2010 if you have the 64bit version.
The Adobe Breeze interface seems to function without issue, even in the 64bit OS.

Meeting Place scheduling using the outlook plugin

Hi All,
I have a question related to Meeting Place 8, for each users or user groups, we can assign the role of:
1) Can attend and host video meeting
2) Can attend video meeting
But can we choose the type of meeting during scheduling? which means I can choose to use video meeting or not.
Many thanks,
Kai

My project was originally a 6.1 project, where I used Web Start.
I delete the project, create a new one, and now for a "Standard Execution", there is no more jar signing.
But using "Run file" acts always as "Run project" : it seems that is the intentionnal and - I hope - temporary : see issue 150514 : http://www.netbeans.org/issues/show_bug.cgi?id=150514

Cisco Meeting Place requirements and solution

Hi There,
I would like to have a on-site; server based manageable audio conference solution in our organization. We have 1 HO. and 25 remote branches located over the country. The Audio system should work via our data network. We have point to point and MPLS link throughout the network.
Audio conference can be held through outlook express/web browser. If not, we can also opt for 1/2 IP Telephones in each Remote site. The HO audio/conference requirement is for 15 users.
We also need to setup conference/Boardroom VC in the Head Office where all the HO Dept Managers would sit in case of remote site conference meeting.Also note that we have data connectivity in all the branches but Internet connections may/may not be available in some of the remote branches.
I have gone through Cisco unified MeetingPlace and looks like a perfect solution to us. Could you please advise if this is the best solution for our audio solution. If yes, Please advise how this would work and suggest part code and license information.
Thanks
Aakash.

This works on your voice network. There is a centralized server usually located in the same location as your CUCM with a SIP connection between the two. Bandwidth requirements are the same as a phone call. If you are using G.711, then 60K+ per call. Each participant calls into the system on either an internal number or on a PSTN line with a dedicated phone number(s). The enter the meeting ID and are in the meeting. Beside scheduled meetings reservationless is also supported. The MP Application Server handles managing the voices in a meeting and is the only server required.
MP runs on specific MCS server listed below and won’t install/be supported on other MCS servers.
MCS 7845-I3-RC2 Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM
HP equivalent: DL380-G6 Server, part number AX693A
MCS 7845-I2-RC2 (end-of-sale 12/09) Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM
MCS 7845-H2-RC2 (end-of-sale 7/09) Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM
HP equivalent: DL380-G5 Server, part number 470064-887
MCS 7835-I3-RC1 Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM
HP equivalent: DL380-G6 Server, part number AX690A
Note: The MCS 7835-I3-RC1 does not support multinode deployments.
The following URL (http://www.cisco.com/en/US/products/sw/ps5664/ps5669/tsd_products_support_series_home.html) is the location of a lot of the MP documentation.
Hope this helps.
John

Cisco Meeting Place Express 2.0 Exchange Server Configuration error.

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system.
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная таблица";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
I have a problem with Cisco Meeting Place Express and Exchange Server synchronizing.
The Cisco Meeting Place Settings are
Exchange Server
Hostname *
Language* de_DE en_AU en_GB en_US fr_CA fr_FR
SSL   enabled * true false
Cisco Unified MeetingPlace Express   Mailbox Account
Windows   domain *
Username *
Password *
Password   confirm *
E-mail   address *
Mailbox   maintenance interval (days) *
Mailbox   maintenance cutover (days) *
When I type the button test, I receive “Authentication error. Check the authenticated access to the Exchange Server for Microsoft NTLM authentication scheme.”
My Exchange Server is synchronized with MS Active Directory. As far as I know, Kerberous is used for authentication. So, how can I enable NTLM authentication scheme on AD? Are there any other options for Cisco MPE and Exchange synchronization?
Thanks for help
Sincerely yours
Sergey Bondarenko

st1\:*{behavior:url(#ieooui) }
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная таблица";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Thanks a lot.
I have corrected domain name in configuration after your advice. Cisco MPE Exchange Configuration is working very well now. I’m able to start a meeting from the outlook calendar and send messages to meeting participants.
Thank you very march for your assistance!
Sincerely yours
Sergey Bondarenko

Meeting Place 8.5.3.4 - Change Directory Service Configuration

Hi Support Community
We have 3 CUCM clusters version 8.6.2
We have 1 Meeting Place 8.5.3.4 cluster with a primary and standby server
Meeting Place has directory service integration with 1 of the CUCM clusters and performs all user sync and authentication via AXL / LDAP
We now need to change the Meeting Place configuration for AXL server, used for authentication and sync, to another CUCM cluster, this will use exactly the same LDAP search base so all users and details will remain the same in CUCM and therefore we want nothing to change in Meeting Place so all users should remain the same with the same configuration and all meetings should remain the same.
It looks straight forward to change the AXL URL but then we discovered the below from the Meeting Place configuration guide :
" user updates, imports, and deletions are not supported from a redundant Cisco Unified Communications Manager, even if it is integrated with the same LDAP directory as the primary Cisco Unified Communications Manager. This is because Directory Service user updates are tied to a field that is unique to each Cisco Unified Communications Manager server."
So we need to know how we go about changing the directory service configuration to point to another CUCM cluster for authentication and synchronization whilst keeping Meeting Place users and meetings in the Database unchanged.
Any help will be greatly appreciated.
Thanks, Carl Ratcliffe

Hi Carl,
I've just received a final update. If you want to point your Directory Integration to a different CUCM server that is holding the same user database and runs AXL service, you should be able to just change the AXL URL on MP and point to this new server. After this change is made and saved, we recommend restarting services on MeetingPlace (SSH to the server with mpxadmin account, changing to 'root', and running 'mpx_sys restart' command). Once the services are restarted and system comes back up, go to User Configuration > Directory Service > Directory Service Configuration and perform a Full Sync (make sure that Profile Number setting under Profile Number Configuration section is set to New users only in order to avoid any profile # change if any of the user profiles in CUCM was updated in the meantime)
Please, let me know of any questions you might have.
Thank you.
-Dejan

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Need Urgent Help on Meeting Place Integration with CUCM 7.1 and AS5400 PSTN Gateway

Hi,
This is first time I am on this forum.
I have already tried going through a lot of docs on docwiki.cisco.com but couldn't find complete configuration help.
I have to integrate Meeting Place 8.X with an existing CUCM and an E1 gateway (PSTN Gateway) AS5400.
The CUCM is already part of a Telepresence Environment. I need to create a SIP trunk between AS5400 and CUCM 7.1 and then create a Trunk between AS5400 and Cisco Unified MP 8.X and then between CUMP and CUCM.
I need help on AS5400 SIP Configs as well as parameters I need to cover on CUCM (Though I have done some basic dial-peer configs but they haven't been of much help).
Then I also need help on AS5400 SIP configs with CUMP 8.0
Any docs on Integration between CUMP and TP3000 will be of great help too.
Rgds,
Asim

I can get the Ricoh to register as sip endpoint, it answeres then imediatly disconnects. Doing a monitor with Wireshark looks like it attempts to negotiate t38 but fails. Any idea why this fails?
|160.260684000|         INVITE SDP (g711U)            |                   |SIP From:
|         |(5060)   ------------------> (5060)   |                   |
|160.338806000|         INVITE SDP (t38)              |                   |SIP Request
|         |(5060)   <------------------ (63435) |                   |
|160.339545000|         491 Request Pending           |                   |SIP Status
|         |(5060)   ------------------> (5060)   |                   |
|160.547894000|         406 Not Acceptable            |                   |SIP Status
|         |(5060)   <------------------ (63435) |                   |

Cisco Meeting Place Express 2.1.1.2 and not working anymore

Hello, we currently have cisco meeting place express 2.1.1.2; however are now having issues with it. We are unable to dial to the internal extension that was previously working to login to the meetings and only get a busy signal everytime. Furthermore, whenever someone tries to schedule a new meeting via the web form, it says "request to server timed out. please try again".
I tried reaching out to Cisco TAC support; however it's no longer a supported item and am looking for assistance here. The TAC engineer was able to help assist with updating the system clock; however I believe the problems started happening after we updated the clock and rebooted the server. Now we are unable to schedule and attend any meetings (busy signal everytime) at all. I tried restarting the server itself as well as via the command line. I also now see an error during CLI restart, which I have listed directly below:
Stopping MeetingPlace SNMP/R:                              [ OK ]
Stopping mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Stopping mpe-tomcat-securewebservices: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Shutting down breeze:                                      [ OK ]
Shutting down fmsmaster:                                   [ OK ]
Shutting down fmsadmin:                                    [ OK ]
Stopping MeetingPlace application: /etc/init.d/mpx_app: line 264: 4955 Segmentation fault      (core dumped) ${shutdown_bin} ${shutdown_arg_1} ${shutdown_arg_2} ${shutdown_arg_3} >>${non_verbose_shutdown_output} 2>&1
                                                           [FAILED]
    ERROR: returncode = 139
Stopping MeetingPlace License Manager:                     [ OK ]
Stopping MeetingPlace database:                            [ OK ]
Stopping MeetingPlace Java RMI: Shutting down RMI Registry:
                                                           [ OK ]
Stopping Cisco MeetingPlace Express:                       [ OK ]
Starting MeetingPlace Java RMI: Starting RMI Registry:
starting daemon
mpxadmin
                                                           [ OK ]
Starting MeetingPlace database:                            [ OK ]
Starting MeetingPlace License Manager:                     [ OK ]
Starting MeetingPlace application:                         [ OK ]
    already running
Starting breeze:                                           [ OK ]
Starting fmsmaster:                                        [ OK ]
Starting fmsadmin:                                         [ OK ]
Starting mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Both the admin and user web interfaces work on the home pages, but can't seem to schedule any new meetings or login to any existing ones, with busy signal as well. Anyone have any ideas? We need assistance with this ASAP since it's our voice collaboration solution. Thanks in advance for any help.

Amlesh,
Here is the pertinent output:
/common/log/taos-log-a/core/core.1947.11.ConfSchd.1183266069
/common/log/taos-log-a/core/core.1837.6.gyromain.bin.1183266161
/common/log/taos-log-a/core/core.1859.6.cpgs.1183266206
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1184475669
/common/log/taos-log-a/core/core.1946.11.ConfSchd.1185685269
/common/log/taos-log-a/core/core.1836.6.gyromain.bin.1185685332
/common/log/taos-log-a/core/core.1880.6.cca.1185685452
/common/log/taos-log-a/core/core.1858.6.cpgs.1185685452
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185771671
/common/log/taos-log-a/core/core.1863.6.cpgs.1185771865
/common/log/taos-log-a/core/core.1884.6.cca.1185771865
/common/log/taos-log-a/core/core.1991.6.nmpagent.1185771865
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185858067
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1188018079
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1188190869
/common/log/taos-log-a/core/core.2008.6.vui.1188190988
/common/log/taos-log-a/core/core.2029.6.nmpagent.1188190988
/common/log/taos-log-a/core/core.1998.6.poclient.1188190988
/common/log/taos-log-a/core/core.1970.11.ConfSchd.1189227671
/common/log/taos-log-a/core/core.1862.6.gyromain.bin.1189227762
/common/log/taos-log-a/core/core.1883.6.cpgs.1189227807
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1189918866
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190005281
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190178068
/common/log/taos-log-a/core/core.1886.6.cca.1190178237
/common/log/taos-log-a/core/core.2012.6.nmpagent.1190178237
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1191906070
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1191906162
/common/log/taos-log-a/core/core.1886.6.cca.1191906248
/common/log/taos-log-a/core/core.1865.6.cpgs.1191906248
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1192424479
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1192424571
/common/log/taos-log-a/core/core.1863.6.cpgs.1192424613
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1192597270
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1192683669
/common/log/taos-log-a/core/core.1903.6.cca.1192683817
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1193029270
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1193029360
/common/log/taos-log-a/core/core.1864.6.cpgs.1193029400
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1193720467
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1193720565
/common/log/taos-log-a/core/core.1864.6.cpgs.1193720610
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1195452071
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1195452170
/common/log/taos-log-a/core/core.1864.6.cpgs.1195452213
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1196834481
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1197007273
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1197007371
/common/log/taos-log-a/core/core.1864.6.cpgs.1197007413
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1198044080
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1198044184
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1199858530
My understanding is these core files are crash dumps and are safe to delete?
Jared

Meeting Place 8.0 - Mute and Unmute Particular Participant

Hi,
I have setup of Meeting place 8.0 Application Server (Express Media Server) and Web Server 8.0
Problem is when Meeting Chairperson (host), who schedules a meeting, can't Mute/ unmute other attendees (Particular Ones) in same meeting (Act as a moderator).
Now, If we provide Attendant privilege to the host, we gets those rights to Mute and Unmute of that meeting As well As all the other meetings running(which is an problem).
Can we have a meeting Chairperson with Mute/ Unmute access (Particular Ones) for only meeting which has been hosted by him.
Please provide some valuable inputs on the same.
Thanks & Regards,
Ashish Bagla

Hi Ashish,
If you have MeetingPlace Audio only solution, from telephone user interface there is no possible way to mute individual participants. You, as a host, can mute only all participants, and then individual participants can unmute themselves if they want to say something.
The only other alternative is to use Conference Manager. However, to be able to use this tool, the user/host has to be either Attendant or System Administrator type of user.
More about Conference Manager you can find here:
1. How to install Conference Manager:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Installing_MeetingPlace_Conference_Manager
2. How to use Conference Manager:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Using_MeetingPlace_Conference_Manager
I hope this will help.
-Dejan

Meeting place and SRST feature

Hi all,
I am new to Voice communication. So, i need help from you guys.
One of my customer one to have cisco Meeting place express on their premises. Basic requirement is -
i) Voice, video and document sharing
ii) PSTN and PABX integration with the solution [SRST feature]
Can you share design and BoM?
Thanks i advance.
Russell

MeetingPlace Express is end of sale and cannot be ordered any longer.
Also, this is not the correct channel for sales/BoM assistance. You need to work with Cisco Presales assistance and/or your Cisco AM if you require assistance on that front.

Meeting place 7.0 compatibility C20 and Movi.

Hi,
I need your help to know if the C20 and Movi devices is compatibility to works with meeting place 7.0. I've checked the cisco documentation and this devices has not been tested with this version.
Anybody knows if it's can working?
Regards

@Radim Mutina.
Yes, like I said before, must read carefully the guidance (docwiki.cisco.com)
If You don't read carefully guidance, it's look similar only 1 word different
I face this problem almost 3 days and I almost gave up, want to open TAC
But, finally I found a needle in a stack of hay
Thank You, for rate Me up

Cisco Meeting Place and Unity

Can anyone tell me where I can find a good book on how to administer Cisco meeting Place and Unity? Thanks.

This works on your voice network. There is a centralized server usually located in the same location as your CUCM with a SIP connection between the two. Bandwidth requirements are the same as a phone call. If you are using G.711, then 60K+ per call. Each participant calls into the system on either an internal number or on a PSTN line with a dedicated phone number(s). The enter the meeting ID and are in the meeting. Beside scheduled meetings reservationless is also supported. The MP Application Server handles managing the voices in a meeting and is the only server required.
MP runs on specific MCS server listed below and won’t install/be supported on other MCS servers.
MCS 7845-I3-RC2 Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM
HP equivalent: DL380-G6 Server, part number AX693A
MCS 7845-I2-RC2 (end-of-sale 12/09) Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM
MCS 7845-H2-RC2 (end-of-sale 7/09) Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM
HP equivalent: DL380-G5 Server, part number 470064-887
MCS 7835-I3-RC1 Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM
HP equivalent: DL380-G6 Server, part number AX690A
Note: The MCS 7835-I3-RC1 does not support multinode deployments.
The following URL (http://www.cisco.com/en/US/products/sw/ps5664/ps5669/tsd_products_support_series_home.html) is the location of a lot of the MP documentation.
Hope this helps.
John

Meeting Place and Webex Call Back Failing

Hi
Meeting place 8.5 with WebEx scheduling, SIP trunk to CUCM 8.5.
Calling in using the specified number configured in call manager completes over the SIP trunk however call back from webex fails.
Error:
WebEx call back failed; no answer.
Problem is I never recieve a call. I have enabled Webex call backs in webex.
Seems like there is an issue on either MP or CUCM.
Just looking for some ideas as I am stumped.

This turned out to be a few things:
1) I needed to configure a SIP proxy to CUCM from meeting place. This was the CUCM IP address and TCP port number.
2) The SIP trunk security profile needed to be reconfigured for this trunk.
3) E164 was being used so I created a translation pattern to strip the + for the CSS associated with the RP.
A few things learned along the way.
1) The "activity" command ran from a SSH prompt with allow you to simulate a call from meeting place. Option 4, enter the number to dial and "f" for port.
2) In meeting place - Services -Logs - System Information Capture - Loading the index file and under the CCA SIP LOG is the error being returned by CUCM. In my case it was Warning: 399 CSLCCM1 "Unable to find a device handler for the request received on port
3) Command "cptrace" again from the SSH prompt will allow you to view the digits being sent from webex to meeting place.
I hope this information helps someone...

Meeting Place 8.0.1.2 and ccm 8.6.2 compatibility confirmation

Hello,
We wish to upgrade our CCM from version 8.0.1 to 8.6.2 which is integrated with meeting place version 8.0.1.2. We have searched for the compatibility on cisco.com and found following two references. We also checked with PDI and they have recommended to use ccm 8.5 or upgrade meeting place to 8.5.
Does anyone have meetingplace 8.0.1.2 and cucm 8.6.2 integrated ?
Note - We have meeting place for audio conference meetings only at the moment. Due to other application requirement we have to upgrade to cucm to 8.6.x.
URL 1 <<----- This states that,
For audio-only installations, you may connect Cisco Unified MeetingPlace to Cisco Unified Communications Manager Release 6.0(3) or later release: this is for Meeting Place 8.0
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_System_Requirements_for_Cisco_Unified_MeetingPlace_Release_8.0#Cisco_Unified_Communications_Manager
URL 2 <<----- This states that,
Component name
Cisco Unified Communications Manager
Component Version
6.1(2) - 8.0
Release Date
Nov. 12, 2007 - Mar. 26, 2010
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Compatibility_Matrix_for_Cisco_Unified_MeetingPlace_Release_8.0
Also, in the compatibility tool , It states that
http://tools.cisco.com/ITDIT/vtgsca/VTGServlet
Goto release -->>8.6->Conferencing ->Cisco Unified MeetingPlace
8.6.(1) compatible version is - Initial 8.5(1).
Thanks,
Shashank

Hi Shashank,
The fact that CUCM 8.6.2 is not specified in the MP8.0 documentation means that MP8.0 hasn’t been officially tested with that version of CUCM, and hence cannot be stated it is officially supported. Since MP8.0 is end of sale, there won’t be any additional testing of this product, and hence CUCM 8.6.x won’t be added to the documentation at any time.
It may work but it is not officially supported by the BU.
Thanks,
Anand
Please rate helpful posts !!

Meeting Place 8 and MS outlook

Similar Messages

Maybe you are looking for