Meeting place web interface java problem

Hi,
we have meeting place 5.3 in our network. When users want to log in to a meeting, internet explorer does not open the meeting place screen in some of the pc's, due to java issues possibly. Is there a known work-around for this?
ps. latest java runtime environment is installed on the machines.

There are no known major issues when using MeetingPlace with IE. Did u try restarting?

Similar Messages

Idea ? web interface + java standalone application

Hello,
I would provide a java standalone application. In parallel, I want create web interface (HTML+CSS+JS) that can write configuration files and read output files.
Can I avoid the use of tomcat server ? May be, I know nice solution like jetty : is-it difficult ?
Anyway, I'm looking for any piece of advice ..
Thanks,
From France
Edited by: phpvik on May 4, 2009 8:10 AM

What are the technical requirements? Just choose the server based on that.

Meeting Place Web Servers ( Internal and External )DNS and IP Addressing

For the Meetingplace 8.5 what will be the IP addresses of the Internal Web Server ( Internal IP's from the same subnet as of the CUCM) and for the External one interface from the internal network subnet ( CUCM subnet) and the other Public IP address?
How we will be mapping the DNS FQDN for these IP addresses?
Do we need to have one internal DNS server and the other place in the DMZ?

Hi Ali,
You need two Web Server one Internal and one External. While configuring you internal web server you also add external if external particpants are allowed or not.
For internal web server you want to make sure it's on the same subnet so internal particpants can access that one. For external you need to make sure the IP configured on external one is either natted ip or public ip so that when they type the external domain name it resolves to this external server ip address.
Let me know if you have more questions.
HTH
Arun

Unified Meeting Place Web Server

Hi
I'm installing MP 8.0 and did not receive a dvd with the webserver software. Does anyone know if it's available for download?
thanks,
Josh

Hi Amit,
The docs on SSO are here:
Cisco Unified MeetingPlace, Release 7.0 -- Configuring User Authentication for Cisco Unified MeetingPlace Web Conferencing:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace%2C_Release_7.0_--_Configuring_User_Authentication_for_Cisco_Unified_MeetingPlace_Web_Conferencing
Hope that helps,
Kurt

Meeting Place 8.0 Audio Recording play back

Hi,
We are currently using Meeting place 8.5, it is currently installed as Express Media server (Single server solution) as audio only conferencing solution.
I am able to record a meeting using meetingplace conference manager, but there is no option to find/play the recording, when i select the meeting and check the meeting details, I can find that the meeting is recorded but Attachment is displayed as No.
I found links which says to find the meeting using Meeting place web scheduler and find meetings but is if no avail as there is not web server installed in my setup.
Would like to if there is any way to find/play the recording.
Thanks,
Vinay

Hi Vinay,
Accessing or playback of recordings requires a Web Scheduling server to manage and convert the recording from the Application server. This is not possible with just an applicaiton server alone.
Thanks,
Derek Johnson
Conferencing TAC

Meeting Place Questions

Please help me with the following questions with MP 7.
We are planning to implement MP 7 in our network soon.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
11. What is process for creating temp user Meeting Place user account ? Is there any expiration date I can set for temp user?
12. Come up with a 8 Digit Range Temporary User Profiles Number to be assigned to temp users.
14. Same User with multiple pins - AD is sync up, how do we handle same user with multiple pins?
15. How do we manage scheduled meetings ? : Recurring Meeting?
16. How do we disable all these in the meeting place web page when user logs in to schedule a meeting?
a.        Once
b.        Daily
c.        Bi-Weekly
d.        Weekly
e.        Monthly by Date
f.        Weekdays
17. Do we want to allow user to setup a meeting password when they start a reservationless meeting?
18. How do we manage the international users phone password since they are not integrated with AD? Is there a process we can implement?
19. MP Training Documents/Materials- Cheat sheets Review?
21. Anything we need to review from User Profile Perspective and System Configs?
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}

MPE 2.0 is EoS
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5664/ps6533/end_of_life_notice_c51-566004.pdf

Unable to luanch meeting room(Meeting place 2.x)

I having some issue with meeting place Web meeting .
Whenever i join the web meeting room , i am getting the below error
System ERROR:
The meeting Room Couldn't connect to the cisco unified meeting place server, please re-launch the meeting room or refresh your browser to restore the connection
Note:
I- installed the proper Flash player, presenter adds on software
2- Browser TEST worked fine
3- I dont see any firewall rule blocking the connection
I will really appreciate your help on this issue.
Regards ,
Shaijal

Hello ,
I got solution for this issue.
There are two IP address for Meeting place express .
one for audio and meeting place access.
second ip is used for Web trafic .In my scenario i havn't done any DNS configuration for
my second IP.After the proper DNS change it statred working .
Thanks ,
Shaijal

HP 6520E howto restset web interface password

Forgotten web interface password
Problem solved
go to wireless-settings- scroll down to-restore network defaults

Hey @Ingenium88 ,
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet P2055 Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
I worked for HP.

Cisco Meeting Place - lab requirements

Hi All,
Appreciate if anyone can just give me a quick pointer.
Apparently; I have limited/no knowledge of implementing the Cisco Meeting Place.
I would like to setup a demo lab/environment for practise.
I managed to obtain the Cisco Meeting Place 7.0 thru the Cisco Unified Workspace for Partners Software & licensing kit.
It came with 4 CDs
1. Cisco Unified Meeting Place Web Conferencing
2. CIsco Unified Meeting Place Application Server
3. CIsco IP Telephony Server Meeting Place (MCS7825,hp servers)
4. Cisco IP Telephony Server Meeting Place (IBM Servers)
I would like to install it in a VM environment.
What else is needed from my side to run Meeting place as a demo lab??
I went thru its hardware requirements
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace%2C_Release_7.0_--_Hardware_Requirements
Application Server
Media Server
Web Server
Would i be able to run all the above 3 on VMware?

This works on your voice network. There is a centralized server usually located in the same location as your CUCM with a SIP connection between the two. Bandwidth requirements are the same as a phone call. If you are using G.711, then 60K+ per call. Each participant calls into the system on either an internal number or on a PSTN line with a dedicated phone number(s). The enter the meeting ID and are in the meeting. Beside scheduled meetings reservationless is also supported. The MP Application Server handles managing the voices in a meeting and is the only server required.
MP runs on specific MCS server listed below and won’t install/be supported on other MCS servers.
MCS 7845-I3-RC2 Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM
HP equivalent: DL380-G6 Server, part number AX693A
MCS 7845-I2-RC2 (end-of-sale 12/09) Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM
MCS 7845-H2-RC2 (end-of-sale 7/09) Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM
HP equivalent: DL380-G5 Server, part number 470064-887
MCS 7835-I3-RC1 Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM
HP equivalent: DL380-G6 Server, part number AX690A
Note: The MCS 7835-I3-RC1 does not support multinode deployments.
The following URL (http://www.cisco.com/en/US/products/sw/ps5664/ps5669/tsd_products_support_series_home.html) is the location of a lot of the MP documentation.
Hope this helps.
John

Meeting place 8.5.1 WebEx deployment and recording audio calls

Have MeetingPlace 8.5.1 application server (Web Ex deployment model -- 1 server) and we need to record our audio calls and that option displays error.
I looked over docs and configuration guidelines, and see no recording options on our config pages for users/user groups like the documentation states to enable this.
Do I need a audiorecording license, and if so, is the WebEx deployment model the correct model to work with recording? The cisco docs on this are not very clear and I haven't found a document that really lists/compares every feature available for each deployment model. The documents that mention audiorecording license talk about an Audio server or meetingplace deployment.
Thanks, Erick

I have this working now, I had to add a 1- to the access number so it was 1-XXX-XXX-XXXX on the Meeting Place web ex configuration page then redo the Webex configuratin setup.

Meeting Place 8.0 Web interface login issue

Dear Team,
I have tried to reset mpxadmin password using root on server so that i can login into webinterface for Meeting Place administration but its not working thrugh server web browser and system browser. i have followed below link to reset the mpxadmin.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Changing_System_Administrator_Passwords_for_Cisco_Unified_MeetingPlace
Error- user does not exist or password incorrect.
I can login using mpxadmin as a user into the server on the place of root.
please help so that i can login thrugh my system on web interface.
Regards
Hari

What I know you can just connect to the servers ip address/DNS name and you will just see a status page like the one attached
There in not much more you can do on the node via web, all configuration is done via the CLI

Meeting place Webex Node 8.0 Web interface

Hi all,
I just installed Meeting place Webex node , an i want what exactly the URL link to access to this server.
Thanks in advance
Hicham

What I know you can just connect to the servers ip address/DNS name and you will just see a status page like the one attached
There in not much more you can do on the node via web, all configuration is done via the CLI

JES5 Language Localize Problem in Web Interface

I hope this is the correct forum to ask this question...
Here's the problem:
I wanted to make a Dutch version of the Sun Java Communication Express, so I followed all the steps you have to do (create folders, translate all the necessary files, edit .properties files, ... etc). I've also restarted the server after uploading.
It seems that everything has worked out well, because when I go to my web interface, I can log in. I change the language to Dutch, and logged out.
Now here's the weird part. When I log in again now, my "Mail" tab stays in English. But when i go to "Calendar", "Options", etc. the interface is show in dutch, as i translated them.
I've found out that the redirecting url might be wrong, cause the url that show in my browser is: (ip)/uwc/webmail/en/mail.html?lang=en&laurel=on&cal=1
It doesn't seem normal to me that, in the url, there is still "en" instead of "nl" for dutch. When I change the url manually, that's the only way to show the dutch version of my mail tab.
So propably the problem is that the url ist being editted after choosing dutch as language(when I choose French, it DOES edit the url to "fr").
Has anyone got an idea how to fix this?
Kind regards,
Andrew

Shane,
as I have been updating our own documentation I have also honored your request to update the publically available [ http://msg.wikidoc.info/index.php?title=Add_New_Language_ME Messaging Server wiki].
For future reference the above link may be more up-to-date then this text.
How do I add a new language to the Messenger Express interface that is not one of the languages localized by Sun?
Because Sun does not provide additional localizations beyond those already supplied, you need to do your own translation.
Start by copying the original files of one of the supported languages to the new language you need to support. In this case I translate from English (language code: en) to Dutch (language code: nl).
Your Messenger Express may be installed in a different directory, change paths accordingly.
<tt>
cp -r /opt/SUNWmsgsr/config/html/en /opt/SUNWmsgsr/config/html/nl
</tt>
Translate the file <tt>/opt/SUNWmsgsr/config/html/nl/i18n.js</tt>. It contains most of natural language used in webmail. The files <tt>help.htm</tt> and <tt>help2.htm</tt> contain a lot of help text. I cheated and replaced those files with less extensive useage instructions or just leave the original english and hope the customers don't complain too much.
For each language already supported and the new one edit the file <tt>i18n.js</tt> and add a localized name for the Dutch language and add Dutch to the supported/available languages in the options page.
<tt>
/opt/SUNWmsgsr/config/html/en/i18n.js
i18n['en']='English'
*'i18n['nl']='Dutch'*
function i18n_preferredlanguagelist()
var lang_list = new Array('en', *'nl',* 'es')
/opt/SUNWmsgsr/config/html/es/i18n.js
i18n['en']='Ingl�s'
*'i18n['nl']='Holand�s'*
function i18n_preferredlanguagelist()
var lang_list = new Array('en', *'nl',* 'es')
/opt/SUNWmsgsr/config/html/nl/i18n.js
i18n['en']='Engels'
*'i18n['nl']='Nederlands'*
function i18n_preferredlanguagelist()
var lang_list = new Array('en', *'nl',* 'es')
</tt>
The Messenger Express web interface has built in spelling check. The dictionary files come from the ancient/traditional unix ispell and are
available for download from: http://ficus-www.cs.ucla.edu/geoff/ispell-dictionaries.html
Download the Dutch affix rule file and the actual dictionary files, and use the buildhash command to make a hash file Messenger Express can use. When
copying this hash files be warned that you can't copy it from x64 to sparc (big/little endian) architectures.
<tt>wget ftp://ftp.tue.nl/pub/tex/GB95/ispell-dutch96/dutch96.lat</tt> (dictionary)
<tt>wget ftp://ftp.tue.nl/pub/tex/GB95/ispell-dutch96/dutch96.aff</tt> (affix file for use with above dictionary)
<tt>
/opt/SUNWmsgsr/lib/buildhash dutch96.lat dutch96.aff /opt/SUNWmsgsr/lib/nl.hash
</tt>
with a new dictionary in the correct place it should be detected automatically after a restart of Messenger Express.
Use configutil to make Messenger Express aware of the new language:
<tt>
/opt/SUNWmsgsr/sbin/configutil -o gen.installedlanguages
/opt/SUNWmsgsr/sbin/configutil -o local.supportedlanguages
</tt>
returns for instance the language strings: <tt>en,es</tt>. Add Dutch:
<tt>
/opt/SUNWmsgsr/sbin/configutil -o gen.installedlanguages -v "en,es,nl"
/opt/SUNWmsgsr/sbin/configutil -o local.supportedlanguages -v "[nl,en,es]"
</tt>
Make the new Dutch language the default language for this site:
<tt>
/opt/SUNWmsgsr/sbin/configutil -o gen.sitelanguage -v nl
</tt>
Restart Messenger Express (web interface) to make the changes effective.
<tt>
/opt/SUNWmsgsr/sbin/stop-msg
/opt/SUNWmsgsr/sbin/start-msg
</tt>

Problem in completing the TASK when using Web Dynpro Java and BPM

Hi,
I am using Web Dynpro Java and BPM.
i see my Web Dynpro View when i run the process.
Just that the task is not completing.
when i click on the Web Dynpro button to signal the completion of the event, nothing happens.
i have appropriately created events in both Component controller and Interface Controller and used the same in creating the Task.
a method in Component controller fires the event and a button click in the view calls this method.
i have successfully completed Donka Dimitrova's "SAP Netweaver Business Process Management-End-to-End Process Implementation Sample " but when i tried my own with slight modifications, it is not working !!!
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d07f3e88-554f-2b10-3cbf-ab8afea51b9f
regards,
-Amol Gupta

Hi Amol,
The way you described the things, I dont see any problems. Just to make sure that you are triggering the right event that you mapped as completion event for the task, try to cross check once again and see if the correct event is getting triggered. Also try to put some messages for debugging to see till where the control goes.
Regards,
Arafat

Problem Web Dynpro Java applications using JasperReports

Hello all,
We have followed the footsteps of these blogs but we can not make it work.
Part I --> Part-I: Print Web Dynpro Java applications using JasperReports
Part II --> Part-II: Print Web Dynpro Java applications using JasperReports
Part III --> Part-III: Print Web Dynpro Java applications using JasperReports
Details system: 7.02 SP3
We believe that the problem is in the library, because it finds them.
1) We created project as a DC external library with *.jars
2) Public part DC external library.
3) Add public part of DC Library into new project DC WebDynpro Java.
4) Development Component -> Build is OK
5) Development Component -> Deploy is OK
6) Test app ERROR.
When we run the application shows the error:
The initial exception that caused the request to fail, was:
   java.lang.NoClassDefFoundError: net/sf/jasperreports/engine/JRDataSource
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:141)
    at com.unisys.tmb.View01.onActiongenerarPDF(View01.java:161)
    at com.unisys.tmb.wdp.InternalView01.wdInvokeEventHandler(InternalView01.java:140)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
Regards,
Luis.

Hello John,
Thanks for the link. We have performed the steps in this blog:
1) Create DC Project "External Library" with name js/jars:
- Add *.jars in folder Libraries.[Screenshot Libraries|http://img846.imageshack.us/img846/8395/jsjars.jpg]
- Add archives (*.jar) to public part with name ExternalLib. Which option to choose?
a- Provides an API for developing/compiling other DCs (Option chosen)
b- Can be packaged into other build results (eg SDAs)
- Development Component -> Build
Step 1 is OK.
2) Create "J2EE Server Component / Library" DC with name js/lib:
- Add Used DC -> public part project ExternalLibrary -> "ExternalLib"
- Specify both build time and run-time dependency here and strong.
- Generated SDA file in <var>gen/default/deploy</var> How do we check that it contains <var>js.jar</var>?
- folder gen/default/plublic/defLib/lib/java then you meet *.jars files again. is OK.
- Development Component -> Deploy.
- Go to Visual Administrator. We found the library js/lib, but has no associated *. jar. It is the problem.[Screenshot Visual Administrator|http://img542.imageshack.us/img542/5537/visualadminlib.jpg]
3) Create "WebDynpro" DC with name pdf_jasper
- Add used DC (defLib) to WebDynpro DC with option "Build time".
- WebDynpro References -> Library references --> add <var>jslib
- Deploy
- Run error: java.lang.NoClassDefFoundError: net/sf/jasperreports/engine/JRDataSource
Regards,
Luis.

Meeting place web interface java problem

Similar Messages

Maybe you are looking for