Meeting place Webex Node 8.0 Web interface

Hi all,
I just installed Meeting place Webex node , an i want what exactly the URL link to access to this server.
Thanks in advance
Hicham

What I know you can just connect to the servers ip address/DNS name and you will just see a status page like the one attached
There in not much more you can do on the node via web, all configuration is done via the CLI

Similar Messages

Meeting place , Webex Node Move to CWMS

Hi
The current setup is a meeting place version 8.x and webexnode version x.
We will move in UCS server with CWMS
CWMS: Cisco Webex Meeting Server
Do you have any useful links for this migration etc?
Please rate all useful posts
Regards
Chrysostomos
""Thinking is the hardest work there is , which is probably the reason why so few engage in it""

Hi,
You can visit the Planning guide for Cisco Webex Meeetings Server which says
Because of architectural differences,there is no migration path (for existing user accounts, customizations,
and meetings) from CiscoUnifiedMeetingPlace to Cisco WebExMeetings Server.These are two distinct
products.
http://www.cisco.com/en/US/docs/collaboration/CWMS/b_planningGuide.pdf
For more info, u can contact Csico SE/AM.
regds,
aman

Meeting Place WebEx 8.0 reservationless audio meeting ID issue

We have just converted from Meeting Place Express 2.x to Meeting Place WebEx 8.0 with Type II scheduling. Since this configuration is reservationless, the audio meeting ID is the user's extension by default and it appears there is no way to change the system from always using the same audio meeting ID for the same user. Our issue is that we have many executive admins who book multiple meetings (sometimes overlapping, sometimes back-to-back) and are now having issues. Since the meetings all share the same audio ID, the meetings are stepping on top of one another. Is there some way to allow the users to change the audio ID per meeting or have the system generate an ID for the audio meeting to prevent this issue?

Hi Saurabh,
MCS7835-I3 is supported by MeetingPlace 8.5 for Audio Only solution. You will need to perform the firmware upgrade before installing 8.5, but all that is documented in the installation documentation.
Keep in mind that from MP8.0 to MP8.5, you are transitioning via migration and not via upgrade. This will require taking migration files from MP8.0 server, performing a firmware update, doing a clean installation of MP8.5 and then restoring from migration files.
In order to obtain MP8.5 installation DVD, you have to purchase the MP8.5 upgrade that is usually included in UCSS/ESW contract. If that expired, you will have to consult with your Cisco Account Team on what is the best way to proceed.
Finally, in MP8.0 licensing is port based, while in MP8.5 licensing is host based. Hence, you will need to do a license conversion after migration is completed. Licensing TAC can help you with that.
Here are some useful documents about this:
INSTALLATION instructions:
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/inst_order.html
MIGRATION instructions:
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/upgrading_software.html
I hope this will help you.
-Dejan

SEM-BPS 6.0 BPS_WB generate Web Interface BSP

Hi all,
We recently had a redirect of the portal connected to our NW04S BW development system and had worked thorugh the issues on the portal side so existing Iviews works (SEM-BPS 6.0).
We are now creating some new iview for a new applications but I cannot generate the BSP page. BPS_WB say that the BSP was generated correctly but when I try to test it, it says that http entry is missing and would I like to add it and when I say I do, it fails since I cannot generate a node under SICF since I do not have the authorization. I did an SU53 check and asked for 01 create on S_ICF_ADM but getting a lot of questions since 01 on S_ICF_ADM is reserved for Basis only on this project.
Another thing we are also concerned with is that some system settings that need to be done on the BW side might now have been done although Basis said all entries are changed..
I have to admit that the last time I worked with someone to set up portal connection to BPS was back in 2003 so I have to dig pretty deep into my memory and had been doing some quick searches but have not found anything obvious yet that would solve the regeneration issue except for the authorization addition which they are very hesitant about.
Any information or thoughts on this issue / problem would be appreciated.
Thansk,
Mary

Hello Mary,
I still work on BCS, so dont have BPS here. What I can do is to give you a summary of those things I had done in the past. Maybe it helps?
I gues you know that there are 2 diffren types of nodes: System nodes to enable connection to the web and the node for each web interface.
The required system nodes are describes in OSS 517484. I guess you have released them? Since BW Release 3.5 the web interface works with HTMLB. I guess you have activated thise too?`So the last possibility is from my point of view the web interface itself.
The node for the web interface existis already?
/default_host/sap/bc/bsp/sap/<your_web_interface>
In develop system the web interfaces will be activated manually normally. But in Prod automaticall because of not allowed customising. If the web interface has created such an entry already I think the only chance is to give the web interface another name in Development system - or to delete the existing node in the prod system (dangerous).
If this is not your problem, maybe another consultant has an idea?
regards
Eckhard Lewin

Meeting Place 8.0 Web interface login issue

Dear Team,
I have tried to reset mpxadmin password using root on server so that i can login into webinterface for Meeting Place administration but its not working thrugh server web browser and system browser. i have followed below link to reset the mpxadmin.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Changing_System_Administrator_Passwords_for_Cisco_Unified_MeetingPlace
Error- user does not exist or password incorrect.
I can login using mpxadmin as a user into the server on the place of root.
please help so that i can login thrugh my system on web interface.
Regards
Hari

What I know you can just connect to the servers ip address/DNS name and you will just see a status page like the one attached
There in not much more you can do on the node via web, all configuration is done via the CLI

Meeting Place 8.0 + Webex Node?

Hello to all,
We have purchased two IBM 7835 servers with the intention of building on as meeting place 8.0 (EMS) and one as a webex node,
The question I have is about the placement of the servers.
I have read the SRND and are still not sure where the webex node (collaboration) server is to be placed, the docs say this should typically be on the
inside network closest to participants
Also where is the best placement for the MP 8.0 server DMZ or Inside the nework,
I guess the collaborative model we are looking at is the
Cisco Unified MeetingPlace with Cisco WebEx Node for Cisco MCS
Any help or docs would be well appreciated.
Thanks
Rich

Hi all,
I encounter the same constraint, so I want to ask you :
We've deployed a Meeting place8.0.0.393 in LAN. Then a Webex Node for MCS will be added.
The concern is that Meeting place is deployed in that LAN, then the WebexNode will be installed there also (on premise).
Thus the DNS that will be used is like "myenterprise.local". ( mpapps1.myenterprise.local and wbxNode1.myenterprise.local)
Its not like .com or .org or any domain reachable from Intenet. the .local is not reachable from Internet.
So my question is : is it possible to use this domain.local in the place of the place of the FQDN of the webex node and Application Node fields?
Regards,
Antra

Meeting place 8.0 and WebEx Node Integration issue.

Hello All,
We have installed MP 8.x and Webex node on seperate servers. After this we have installed a webserver.exe and sql server on a different server and configured the GatewaySIM and sql. connectivity is fine.
1. Please let us know how to login to MP user portal. (What is the URL)
2. How to integrate Webex with MP?
3. Is there a good document to bring up the webex web interface.
Regards,
Shaijal

Take a look at http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Integrating_Cisco_Unified_MeetingPlace_with_Cisco_WebEx
That has all the information I used to eventually get the MP WebEx integration to work for us.
If you have problems you may struggle to get a good answer from Cisco on this, unfortunately there is very little knowledge of WebEx within Cisco TAC, something they badly need to address.

Meeting place web interface java problem

Hi,
we have meeting place 5.3 in our network. When users want to log in to a meeting, internet explorer does not open the meeting place screen in some of the pc's, due to java issues possibly. Is there a known work-around for this?
ps. latest java runtime environment is installed on the machines.

There are no known major issues when using MeetingPlace with IE. Did u try restarting?

Question in Cisco Unified Meeting Place 8.5 with Webex integration

Greetings,
Let us say that I have the following requirements for fresh installation:
UCS C210-M2
CUWL-Pro for users (700 users)
CUCM 8.6
Cisco unified Meeting Place 8.5
My concern is about Meeting place; one of the requirments is to order Meeting Place 8.5 for local (on-premises) audio conferencing, and use Cisco Webex (cloud) for Web & Video conferencing.
I have the following questions:
- What part numbers should be ordered for meeting place and Webex?
- CUWL-Pro comes with Webex ports included, can use those ports?
Thanks in advance..

Hi Anand,
For MP 8.5 new setup, you don't need a web server. Web server is an optional component only when you are upgrading the system from earlier MP releases.
If you are installing Webex node, it needs to be on a seperate MCS server (however, this is an optional component).
Application server and Express Media Server require only one UCS server if this is single node deployment.
Hardware requirements for application server and Webex node can be found in the following documents:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Hardware_Requirements#Application_Server_Requirements
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Hardware_Requirements#Cisco_WebEx_Node_Requirements
The complete information about MP 8.5 requirements:
http://docwiki.cisco.com/wiki/Category:Planning_for_Cisco_Unified_MeetingPlace_Release_8.5
HTH,
Natasa

Meeting Place 8.6 Integration with Webex

Hi, I would like to get a better understanding of workflow and packet flow for MP 8.6 integration with Webex.
My customer is looking to initiate an on prem meeting with MP 8.6 via outlook scheduling /jabber (if possible). All audio and video would be on prem. Also, this would be a multipoint video call, so I am assuming an MCU would be required (unless MP 8.6 provide MCU capabilities).
Then, through a federated IM environment, my customer would like to be able to chat with an external partner via jabber and escalete the on prem MP8.6 conference to a Webex meeting to add the external partner to the meeting.
Questions
1. Are you able to walk me through how this would work?
2. Can you recommend a bill or materials based on the scenario and facts below? Right now I am assuming we need CUWL professional for required users, a UCS C210, an MCU and Webex subscription.
Current Assumptions & Questions
1. In this scenario the audio bridge would have to remain on prem and the external partner could request a call from meeting place to join the audi bridge back via Webex. Correct?
2. If am MCU is being used on prem for the multipoint video conference and the conference was escalated to a webex via jabber how many video connections to Webex would there be? Single multiplexed video from the MCU or individual video connections from on prem to Webex and Webex would combine the video sources?
3. Is Webex Node still required?
4. With MP 8.6 is scheduling still tightly integrated with Outlook?
Facts:
1. Users are a combination of CUWL standard and professional. Professional users for conferencing and mobile jabber.
2. Customer has TP envrironment which would be multipoint video participants
3. Customer has compatible CUCM and CUPS with MP 8.6
4. Jabber desktop will be installed on all clients
5. Customer is expanding PRI, ISR and DSP resources to support additional audio requirements

All - what have discoverd is Meeting Place node is going away. Meetings will be held in Webex moving forward and MP should be used as an on prem audio bridge only. Some new WebEx solutions are on the roadmap.

Webex (cloud) integrated with Meeting Place 8.5 no audio record

Meeting Place 8.5 fully integrated with Webex. Webex scheduling is used. Meeting participants use Webex for the sharing of video and desktop. Meeting participants call into the Meeting Place Server for audio. Recording is turned on by the Host on Webex. Recording is saved. When recording is played back, cannot hear any audio from that I was assuming is recorded on the Meeting Place Server. I need guidance on how to get audio recording of meeting using Meeting Place as the audio conference bridge. Host user is setup on Webex to use Meeting Place server. As far as I can tell users are set up correctly. Any help will be greatly appreciated. Thanks.

Hi Thomas,
Is this a new deployment or a production environment?
What exact version for MeetingPlace 8.5 do you have?
Was recording working before and just stopped, or it never worked?
Can you attach the screen shot of "MeetingPlace Administration Center > Cisco WebEx Configuration > Cisco WebEx Site Configuration"?
Can you attach the screen shot of your "WebEx Site Administration > Manage Site > Site Settings > View Cisco Unified MeetingPlace Integration Settings page" page?
How recording works:
When you start a meeting in WebEx, and participants join audio on MeetingPlace, and you click Record button, WebEx dials in to MeetingPlace using the "NBR Dial-out Number" configured in "WebEx Site Administration > Manage Site > Site Settings > View Cisco Unified MeetingPlace Integration Settings page" and joins the meeting with recording user credentials automatically generated by the system and initiates recording of the audio portion of the meeting. Audio and web recording are afterwards mixed in the cloud and available for playback.
Issues seen with recording:
1. "NBR Dial-out Number" is wrong (wrong Access number is provided when Cisco WebEx Site Configuration was configured).
2. DTMF digits weren't passed properly to MeetingPlace when WebEx dialed in to MeetingPlace to join the meeting and start the recording. However, in those case you would probably hear MeetingPlace prompts in the recording and not silence.
3. Recording wasn't triggered properly in WebEx and needs investigation (investigation with WebEx support)
4. Recording couldn't be started on MeetingPlace and needs investigation (logs, TAC case, etc.)
I hope this information is helpful for the start.
-Dejan

Meeting place 8.5.1 WebEx deployment and recording audio calls

Have MeetingPlace 8.5.1 application server (Web Ex deployment model -- 1 server) and we need to record our audio calls and that option displays error.
I looked over docs and configuration guidelines, and see no recording options on our config pages for users/user groups like the documentation states to enable this.
Do I need a audiorecording license, and if so, is the WebEx deployment model the correct model to work with recording? The cisco docs on this are not very clear and I haven't found a document that really lists/compares every feature available for each deployment model. The documents that mention audiorecording license talk about an Audio server or meetingplace deployment.
Thanks, Erick

I have this working now, I had to add a 1- to the access number so it was 1-XXX-XXX-XXXX on the Meeting Place web ex configuration page then redo the Webex configuratin setup.

Meeting Place Express 2.1.1.2 Web Access Issue

Hello all,
I'am having an issue with a Meeting Place Express 2.1.1.2 server. There was a power failure and now we can still access the server via dial-in but the web acess is not working. From the CLI i run the mpx_sys status command and it says webservices is active. The server has been restarted. When I check the errorlog I see "unable to connect to webservices, trying again" Anyone know what the issue might be? Thanks
Jason

Hello Hasnain,
Have you tried the recovery procedures below:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express%2C_Release_2.x_--_Troubleshooting_System_Issues#Recovering_the_Password_for_the_root_Account
If that doesnt work, you will need to open a TAC case and TAC will send you a password recovery .iso file to burn on a CD/DVD.
Regards,
Victor Dang.

Meeting Place 8.0 + Webex Scheduling

We are using MP 8 with WebexNode for mcs, when opening a meeting, we always have to check the box 'allow external participants' otherwise we are disconnected from the meeting.
Can anyone suggest what setting may be causing this please.
Cheers
Rich

Rich,
This is not normal behavior. I am not sure what is causing this problem so need to understand a little more about your environment.
I assume you have a WebEx Node for internal meetings and the internal meetings work OK? Now with the above mentioned check box checked all meetings default to the being external in the cloud though you can still schedule internal meetings.
Does your WebEx support SSO and integrated with MP for security and profile maintenance?
Are you on the network when you try to join these meetings?
Can you sign-in as the host?
If you have the WebEx Node you have internal licenses?
Sorry for all the questions.
John

Web Interfaces: BPS-Hierarchy: Collapse/ Expand all nodes

Hello,
having a bps hierarchy in a web interface, is there any way to collapse/ expand all nodes at once (via a button)?
Cheers,
Simon

Simon
Web interface does not support the collapsing of hierarchy.
it will automatically expands hierarchy.
Thanks,
Raj.

Meeting place Webex Node 8.0 Web interface

Similar Messages

Maybe you are looking for