Meeting Recording Error Message

Forum,
While trying to record a meeting yesterday, I kept receiving
an “auto recording failed” message with a yellow
exclamation point in the upper right corner of the screen. After
reviewing the recording, it looks like only the video was captured.
Has anyone received this error message before and know the causes?
Perhaps a bad connection to the Enterprise server?
Regards,
Erik

sand box wrote:
Erik.......do you feel it is better to record direct to my external HD or the Imac HD?
External. IF it is Firewire. USB is less suitable, but it'll do too. The startup disk is also busy handling RAM for virtual memory, so it is doubly stressed when recording to it, and will 'refuse' to record, or drop out, or say "disk too slow" sooner.
What are the best settings for buffer and the other recording parameters?
Depends on your machine; rule of thumb: keep it as low as possible when recording for minimum latency (32, 64 or 128 or 256), and set it higher when playing back, (256-1024) to avoid "system overload".
The best recording format imo is 24 bit/44.1 KHz (or 48 KHz). If you record 10+ tracks that are all subtle acoustic recordings, it may ever so slighly improve sound/mix quality to go with 24/96KHz, but that will also double the overhead for the CPU. And imo the difference even then is hardly perceptible, save for the most highly trained professional ears.
I record basic rock with 16 tracks or less and not overly complicated effects. Also I still don't understand what "flattening" of a track means. Thanx.
Okay, so 24/44.1 is enough for that. Flattening a track means that you make a new audio file (solo the track, and bounce) that includes the plugin effects you applied to it. It is an (old fashioned) way of freeing up CPU (because you can switch off the plugins afterwards and use the 'flattened' audio file).
Freezing provides a better alternative for freeing up CPU though. Look it up in the manual, it is a simple and effective feature.
regards, Erik.

Similar Messages

Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings

Hi All,
I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated.
Best regards,
Rajiv Arora.

ra33,
I am very glad to help you with this.
According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode. You can manually select to record to the SD cards, but only in the Manual or Cinema modes. If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
If there is anything else I can help you with, please let me know.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to avoid 'duplicate data record' error message when loading master data

Dear Experts
We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
Is there a trick you know to tell the system that the date fields are also part of the key??
Thank you for your help
Peter

Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
Siggi - I don't have the error message described in the note.
"There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
In PSA the records are marked red with the same message (MSG no 191).
As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
Thanks
Peter

Disk is too slow (Record) error message

Hello there.
I've been using GB for 18 months now and have only few issues.
One issue I've had from time to time is an error message during recording. This in the past has meant that unless I'm paying attention to the screen, we can loose an awful lot of material.
It happened again this weekend and I managed to grab a screen shot.
The error message reads
"Garage Band
Disk is too slow. (Record)
(-10005)"
I'm using a 2.4Ghz Intel Core 2 Duo with 4GB Ram.
I'm recording to my internal Hard Drive which has over 90gig of free space.
I'm currently recording through an F-Control Firewire device, but I would also get this error when I used to use USB headsets.
Has anyone seen this error or have an idea whats causing this I'd love to know. Its always a pain having to be conscious that it could happen at any points, detracts from getting into the full flow of the conversation.
Thanks in advance
Matt

I'm using a 2.4Ghz Intel Core 2 Duo with 4GB Ram.
I'm recording to my internal Hard Drive which has over 90gig of free space.
All these data has nothing to do with your disk speed! This is measured in rpm, and an external disk with at least 7200 rpm might alleviate your problem.
What is your disk's speed? And how many tracks are you handling simultaneously?

Info Record - Error Message "Company Code not assigned to Country"

Hi,
I am a beginner in SAP MM.
I am trying to Create an Info Record(ME11). After enter the material, Purchase Org., and Storage Location. While saving the data error message is being displayed as "Company Code not assigned to Country".
Please let me know the reason for this error.
Thanks,
Vinod.J

Hi Vinod,
The error might because of few SPRO setting are missing about the Company Code, (to which your Material/ plant/ P. Org. of your Info record are assigned/ maintained)
Check whether customizing given in below link is done,
http://www.sap-img.com/financial/company-code-not-assigned-to-country.htm
Regards,
Pravin

Update record error message

Hello Group,
Apex 3.0
I get an error when I try to update a field in the Master-Detail form (where both Master and Child records are on the same page) but only on the Master record. If I make changes to the Child records I have no problems.
Here is the error message:
ORA-20001: Error in DML: p_rowid=185, p_alt_rowid=MULTIYEAR_CONTRACTS_ID, p_rowid2=, p_alt_rowid2=. ORA-02292: integrity constraint (XXUTPA_BA.RENEW_OPT_CON) violated - child record found
I'm not sure if it is because the p_rowid2 and p_alt_rowid2 are blank (null) or if it is something else.
Thanks

psalmu,
is this what you were looking for?
CREATE TABLE "MULTIYEAR_CONTRACTS"
(     "MULTIYEAR_CONTRACTS_ID" NUMBER(3,0),
     "VENDOR_NAME" VARCHAR2(40),
     "DESCRIPTION" VARCHAR2(80),
     "ORIGINAL_PRICE" NUMBER(10,2) NOT NULL ENABLE,
     "NUM_RENEWAL_OPTIONS" NUMBER NOT NULL ENABLE,
     "START_DATE" DATE NOT NULL ENABLE,
     "ABSOLUTE_END_DATE" DATE NOT NULL ENABLE,
     "NOTES" VARCHAR2(255),
     "DEPARTMENT" NUMBER,
     "ACCOUNT_NUM" VARCHAR2(10),
     "TYPE_OF_CONTRACTS" VARCHAR2(3),
     "CONTACT_PERSON" VARCHAR2(20),
     "CONTACT_EMAIL" VARCHAR2(30),
     "CONTACT_PHONE" VARCHAR2(14),
     "BUYER_CODE" VARCHAR2(3),
     "CONTACT_PURCH" VARCHAR2(1),
     "INACTIVE" VARCHAR2(1),
     "UOM" VARCHAR2(10),
     "ORIGINAL_PO_NUM" VARCHAR2(10),
     "RENEW_OPT_REMAIN" NUMBER,
     "NOTIFICATION" NUMBER(1,0) NOT NULL ENABLE,
     CONSTRAINT "MULTIYEAR_CONTRACTS_CON" PRIMARY KEY ("MULTIYEAR_CONTRACTS_ID") ENABLE
CREATE TABLE "RENEW_OPT"
(     "RENEW_OPT_ID" NUMBER NOT NULL ENABLE,
     "MULTIYEAR_ID" NUMBER NOT NULL ENABLE,
     "MAX_ESCALATION_PER_YEAR" NUMBER(4,2) NOT NULL ENABLE,
     "PREV_PO_NUM" VARCHAR2(15),
     "FY_START_DATE" DATE,
     "FY_END_DATE" DATE,
     CONSTRAINT "RENEW_OPT_PK" PRIMARY KEY ("RENEW_OPT_ID") ENABLE
ALTER TABLE "RENEW_OPT" ADD CONSTRAINT "RENEW_OPT_CON" FOREIGN KEY ("MULTIYEAR_ID")
     REFERENCES "MULTIYEAR_CONTRACTS" ("MULTIYEAR_CONTRACTS_ID") ON DELETE CASCADE ENABLE
CREATE SEQUENCE "MULTIYEAR_CONTRACTS_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 271 CACHE 20 NOORDER NOCYCLE
CREATE OR REPLACE TRIGGER "MULTIYEAR_CONTRACTS_T1"
BEFORE insert or update or delete on "MULTIYEAR_CONTRACTS"
for each row
begin
select MULTIYEAR_CONTRACTS_SEQ.nextval into :NEW.MULTIYEAR_CONTRACTS_ID from dual;
end;
ALTER TRIGGER "MULTIYEAR_CONTRACTS_T1" ENABLE
/

[SOLVED :)]How do I record error messages to post to the forum?

My setup:
Win 7 running Arch on VBox
Arch networking is set up and working
Nothing installed except for vim, links, + many packages included at install
Issue:
Having trouble installing xorg-server (etc, stuff needed for GUI)
So I have all these error messages, and I would like to post them to the forum and they're too long to type. Supposing I didn't just want to summarize or tell you the gist of the message, how would I copy the whole thing and post it to these forums. I'm sure there are many ways, so let's hear some!
I can already redirect to file with:
pacman -S <package list> > errors.txt 2>&1
How would I grab that data from my VBox install and send it either from Arch or from Win7?
*Edit*: I /am/ able to install some things with pacman -S <package> (like vim).
Last edited by enjoysmath (2012-05-15 13:18:55)

ngoonee wrote:
enjoysmath wrote:To do a shared folder I had to install Guest Additions, and so on (an all day project for me).
You MAY want to consider whether you have enough time to play around with Arch Linux, in that case.
I have. I've tried other distros and each one of them had problems. So to solve my problems, I'm going to need to understand linux more. For that reason, I chose Arch. And it was recommended by an IRC friend who is doing similar code writing as me, and if we work on this project together we can help each other out with our computer issues. E.g. If I'm on win 7 and he's on Arch, I have some weird issue with Visual D, and all he can say is good luck! Once I've got my setup working, we can help each other since we'll both be running into the same bugs. Another reason is speed, basic linux with minimal crap pre-installed seems to run way faster in VBox. I'm in AZ, where the temperature really does affect CPU temp.
In learning linux, there is a healthy trade off between learning every detail about one thing and just skimming over and going back to it later. I am now doing more of the latter so that I can have just the basics up and running, X-windows, sound, networking, and so on... So when I see a sed command, I think 'yeah it would be worth it to learn how to use sed,' but if I did nothing but learning sed for the next week, I would not meet certain idealistic goals I have for myself. And if I take too long, on one thing, how do I know that what I am doing is the smart way to do it? I need the bigger picture for that. So I need to carefully manage what little time I have on Earth, and use all I know, all my intuition to make the right decision at each step, and sometimes that decision is either: try something else, get help from someone else, understand something more, sleep on it. I lost my point somewhere in there. But yeah, I am an able to learn, in my own way, what I want, and when I want to. When the time comes for me to teach, I will understand my pupils, and encourage them, knowing each one is relatively unique in their goals and plans for Arch or w/e I'm teaching them.

Recorder Error Message when capturing from camcorder

How do I overcome the Recorder Message "Date/Time recorded not found on tape and is required for scene detection". The tape concerned does have the date & time the clips were recorded shown on the camcorder screen when viewing tape playback. I have successfully downloaded the clips from the camcorder onto Windows Movie Maker. The camcorder is a new Panasonic NV-GS330 and the instructions for it advise that clips are downloaded onto a PC via a USB 2 terminal and to use the enclosed USB cable. I have complied with this. Note I can successfully download photographs into photoshop from my digital camera using the same USB. My PC uses XP home Edition with SP3, 512Mb Ram.

I am having the same error message, however the circumstances are different.
I have a Panasonic PV-GS400. One of the reasons I bought this DV camera is it's ability to be used as a digital "pass-thru" recording device for analog content from a vcr/analog camcorder, ect.
This way, I can use that function to directly record analog tape right to the PC rather than having to copy it to the DV camcorder first then copying to the PC.
Here is the catch... Everything is working fine as far as both camcorder settings being correct, all cables correct and when I playback the analog camcorders content, it indeed is being passed thru the DV camcorder AND IS BEING PLAYED PROPERLY IN THE ADOBE CAPTURE WINDOW. Audio and all.
But I CANNOT press the get video (record button). When I do, it wants to record the tape in the DV camcorder, so I removed the tape. But it still wont allow me to record what is being displayed in the capture window, even though it is playing (previewing) BEAUTIFULLY!!
I just need to be able to record what is playing in the window!

Update record error message: Server behavior, updaterecord.js

Hello,
I'm developing a website using PHP and MySQL on Dreamweaver CS5, Snow Leopard.
I'm having trouble with the updateRecord Server Behavior:
Right after selecting "Update Record" in "Server Behavior" menu, I get the following error message in a popup window:
while executing onLoad in UpdateRecord.htm, the following javascript error(s) occurred:
At line 687 of file "Macintosh HD:Applications:Adobe Dreamweaver CS5:Configuration:ServerBehaviors:PHP_MySQL:UpdateRecord.js." name has no properties
After selecting "ok" in the popup window, the "Update Record" window menu opens. However, when I tried to selected the desired table from the database in the dropdown menu, the same error message/popup window appears. I clicked "ok" once again, but the "column" textarea doesn't get populated at all. But, the "Value" dropdown menu does get populated with the correct data.
I need help asap. Please contact me if you need more information.
Thank you so much for taking your time to read my post, hopefully you'll be able to help me.
Best,
Alice Li

I have this same problem. Was working fine then I removed the Recordset and added it again to change the name. After binding the dynamic info to my form fields I tryied to add an update record behavior and I got this error.
I had already done this once I think with no problem. I tried restarting Dreamweaver and the computer but the issue still persists.
Any help!?

'In the case of a fixed vendor, please enter info record' error message

Hello All,
We are on SRM 5.5. User created SC and selected a vendor as a source of supply. After ordering, Pr should be created in ERP. Instead of that we receive an error - "In the case of a fixed vendor, please enter info record". Any idea what can be causing this problem? I was trying to replicate that problem by creating PR manually and putting a fixed vendor there but the field is cleared out autimatically upon 'check'. Please advise.
kind regards,
Robert

Hi,
Have a look at these threads:
Re: PR instead of PO created
Re: How to create PO in Backend by refering only vendor
BR,
Disha.
DO reward points for useful answers.

RECORDING ERROR MESSAGE-'DISC TOO SLOW'

Every once and a while after I have recorded around 12+ tracks, I get a "Disc too slow" message with a black block at the end of the recording. The black block when played back is just a loud noise. What is this and what setting might I have wrong. I have the new IMac 27" with quad cores. The cores meter is barely moving and I don't hardly have any processors on. HELP.

sand box wrote:
Erik.......do you feel it is better to record direct to my external HD or the Imac HD?
External. IF it is Firewire. USB is less suitable, but it'll do too. The startup disk is also busy handling RAM for virtual memory, so it is doubly stressed when recording to it, and will 'refuse' to record, or drop out, or say "disk too slow" sooner.
What are the best settings for buffer and the other recording parameters?
Depends on your machine; rule of thumb: keep it as low as possible when recording for minimum latency (32, 64 or 128 or 256), and set it higher when playing back, (256-1024) to avoid "system overload".
The best recording format imo is 24 bit/44.1 KHz (or 48 KHz). If you record 10+ tracks that are all subtle acoustic recordings, it may ever so slighly improve sound/mix quality to go with 24/96KHz, but that will also double the overhead for the CPU. And imo the difference even then is hardly perceptible, save for the most highly trained professional ears.
I record basic rock with 16 tracks or less and not overly complicated effects. Also I still don't understand what "flattening" of a track means. Thanx.
Okay, so 24/44.1 is enough for that. Flattening a track means that you make a new audio file (solo the track, and bounce) that includes the plugin effects you applied to it. It is an (old fashioned) way of freeing up CPU (because you can switch off the plugins afterwards and use the 'flattened' audio file).
Freezing provides a better alternative for freeing up CPU though. Look it up in the manual, it is a simple and effective feature.
regards, Erik.

Insert records error message - PLEASE HELP

Any one know what this means? I am really having a hard time
getting the insert feature to work. Using ASP. Thanks so much!
Microsoft VBScript runtime error '800a000d"
Type mismatch: 'LBound'
/admin_employee_insert.asp, line 101
' create the sql insert statement
MM_tableValues = ""
MM_dbValues = ""
For MM_i = LBound(MM_fields) To UBound(MM_fields) Step 2
[LINE 101]
MM_formVal = MM_fields(MM_i+1)
MM_typeArray = Split(MM_columns(MM_i+1),",")
MM_delim = MM_typeArray(0)
If (MM_delim = "none") Then MM_delim = ""
MM_altVal = MM_typeArray(1)
If (MM_altVal = "none") Then MM_altVal = ""
MM_emptyVal = MM_typeArray(2)
If (MM_emptyVal = "none") Then MM_emptyVal = ""
If (MM_formVal = "") Then
MM_formVal = MM_emptyVal
Else
If (MM_altVal <> "") Then
MM_formVal = MM_altVal
ElseIf (MM_delim = "'") Then ' escape quotes
MM_formVal = "'" & Replace(MM_formVal,"'","''") &
Else
MM_formVal = MM_delim + MM_formVal + MM_delim
End If
End If
If (MM_i <> LBound(MM_fields)) Then
MM_tableValues = MM_tableValues & ","
MM_dbValues = MM_dbValues & ","
End If
MM_tableValues = MM_tableValues & MM_columns(MM_i)
MM_dbValues = MM_dbValues & MM_formVal
Next
MM_editQuery = "insert into " & MM_editTable & " ("
& MM_tableValues & ") values (" & MM_dbValues & ")"
If (Not MM_abortEdit) Then
' execute the insert

The error can occur in a SELECT, UPDATE, INSERT or other SQL
query. Usually, each simply means that you are trying to query,
change, or add to a given field but the data you are using does not
match the type of that field or that the field name you are using
doesn't exist. Check your code and check your database to ensure
that the field type is correct for the data type you are trying to
edit / update.

Boot drive error message

Following a near disaster after installing security update 2005-009 i have 2 problems ( or maybe only 1)
When i do a verify on my boot drive i get the message from disk utility, INCORRECT NUMBER OF THREAD RECORDS, volume needs repair but it cannot fix it.
Any suggestions.
Second after I managed to get my boot drive running again following many kernel panics I now have a folder called damaged files, can I discard this as it seems to mirror my HD

Hi, Paul and Allan, et.al —
Paul — Fwiw, I agree with Allan about your apparent options.
When you launched Disk Utility from your Install Disc as part of running Disk First Aid, did you notice the S.M.A.R.T. status of your HD?
Before saying another word — have you tried to access and save any data that may not have been included in your last backup? Using FireWire Target Disk Mode from another (or borrowed) Mac might be a means to accomplish this...
I'm not familiar with the specific "incorrect number of thread records" error message you received — so everything below should be considered conjectural or based on the perspective of the references cited. Each file and folder (directory) in an HFS+ file system must have a unique thread record. Apple describes the technical details in technical note TN1150: HFS+ Volume Format and the File Manager Reference. On a more layperson's level — paraphrasing and quoting from this source and its linked refs. — on an HFS+ formatted volume, a Catalog file contains records for all the files and directories stored in the volume. File thread records and directory thread records are two of four types of records contained in the catalog file. A file thread record stores just the name of the file and the Catalog Node ID (CNID) of its parent directory; similarly, a directory thread record stores its name and the CNID of its parent directory. The other two records are file records and directory records that "store a variety of metadata — including CNID, size, time-stamps, the first file extents of the data and resource forks, and pointers to the file's first data and resource extent records in the Extent Overflow File."
My point in considering this is that an incorrect number of thread records suggests that the catalog file can't do its job properly in helping you to access your files and directories. As Allan concluded, this sounds like a potentially significant disk directory problem. Although the terminology differs, a MicroMat (makers of TechTool) tech addresses a TechTool "file thread mismatch (-92) error" message in this MacFixIt forum thread. Several users report their experiences. If the Disk Utility "incorrect number" and TechTool "thread mismatch" messages are comparable... the MicroMat tech's comment that "Unfortunately, the file thread mismatch is an uncommon disk directory error, and it is not possible to know whether the ultimate cause is software or hardware" may be relevant.
I hope that you follow Allan's advice — and that DiskWarrior 3.0.3, TechTool Pro 4.0.6, or ProSoft's DriveGenius 1.1.5 is able to repair the problem — or that you're in a position to perform an Erase & Install. Please keep us apprised of your progress, so others may learn from your experience.
Good luck!
Dean

About the error message

Is there any body meetting that error message "java.lang.IllegalStateException: Response has already been committed"?
I couldn't find where the error is.
Could you give me a help?
Thanks for that.
joyce

Hi,
The IllegalStateException in a servlet is thrown when some information has already been sent to the client and then if you try to forward or redirect or include a page.
You can check it in your JSP code.

Getting "java.lang.NullPointerException" error message when trying to run an OATS OpenScript file from Eclipse to Create a record in Oracle EBS

Hello,
I'm trying to run a simple OpenScript script in Eclipse that creates a record (a Supplier in this case) in Oracle E-Business Suite. So I copied the the script file from OpenScript and created it as a Class in Eclipse. Then I created a main class to call the methods within the script class but no matter what method I call (initialize, run or finalize) I'm getting the java.lang.NullPointerException message. The error doesn't seem to be related with any specific line in the script but with the way that I'm calling it.
Should I call the OpenScript class from my main class in a different way? (see my examples below)
BTW, all external .jar files coming with OATS have been added to my project in Eclipse.
1) Here's the main class I created to call the OpenScript method (Eclipse auto-corrected my main class adding a Try and Catch around the method call):
public class Test {
    public static void main(String[] args) {
        nvscript nvs = new nvscript();
        try {
            nvs.initialize();
        } catch (Exception e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
2) Here's the script from OpenScript (the actual script has more steps but I'm just using the first one for a proof of concept):
import oracle.oats.scripting.modules.basic.api.*;
import oracle.oats.scripting.modules.browser.api.*;
import oracle.oats.scripting.modules.functionalTest.api.*;
import oracle.oats.scripting.modules.utilities.api.*;
import oracle.oats.scripting.modules.utilities.api.sql.*;
import oracle.oats.scripting.modules.utilities.api.xml.*;
import oracle.oats.scripting.modules.utilities.api.file.*;
import oracle.oats.scripting.modules.webdom.api.*;
import oracle.oats.scripting.modules.formsFT.api.*;
import oracle.oats.scripting.modules.applet.api.*;
public class nvscript extends IteratingVUserScript {
    @ScriptService oracle.oats.scripting.modules.utilities.api.UtilitiesService utilities;
    @ScriptService oracle.oats.scripting.modules.browser.api.BrowserService browser;
    @ScriptService oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService ft;
    @ScriptService oracle.oats.scripting.modules.webdom.api.WebDomService web;
    @ScriptService oracle.oats.scripting.modules.applet.api.AppletService applet;
    @ScriptService oracle.oats.scripting.modules.formsFT.api.FormsService forms;
    public void initialize() throws Exception {
        this.getSettings().set("formsft.useformsonly",true);
        browser.launch();
    public void run() throws Exception {
        beginStep(
                "[1] E-Business Suite Home Page Redirect (/ebs12cloud.winshuttle.com:8000/)",
                0);
            web.window(2, "/web:window[@index='0' or @title='about:blank']")
                    .navigate("http://ebs12.xxxxxxx.com:8000/");
            web.window(4, "/web:window[@index='0' or @title='Login']")
                    .waitForPage(null);
                think(4.969);
            web.textBox(
                    7,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_text[@id='usernameField' or @name='usernameField' or @index='0']")
                    .setText("winshuttle_user");
                think(2.0);
            web.textBox(
                    8,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_password[@id='passwordField' or @name='passwordField' or @index='0']")
                    .click();
                think(1.109);
            web.textBox(
                    9,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:input_password[@id='passwordField' or @name='passwordField' or @index='0']")
                    .setPassword(deobfuscate("kjhkjhkj=="));
                think(1.516);
            web.button(
                    10,
                    "/web:window[@index='0' or @title='Login']/web:document[@index='0']/web:form[@id='DefaultFormName' or @name='DefaultFormName' or @index='0']/web:button[@id='SubmitButton' or @value='Login' or @index='0']")
                    .click();
        endStep();
    public void finish() throws Exception {
3) Here's the error messages I'm getting based on the method I call from my main class:
3.a) when calling Initialize():
java.lang.NullPointerException
    at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.getSettings(IteratingVUserScript.java:723)
    at nvscript.initialize(nvscript.java:22)
    at Test.main(Test.java:9)
3 b) when calling Run():
java.lang.NullPointerException
    at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.beginStep(IteratingVUserScript.java:260)
    at nvscript.run(nvscript.java:30)
    at Test.main(Test.java:9)
Any help and/or constructive comment will be appreciated it.
Thanks.
Federico.

UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede.

Meeting Recording Error Message

Similar Messages

Maybe you are looking for