MeetingPLace 7.0: Display duration in Home Administration Web Conferences

From the web server of MeetingPlace as an administrator I can view running web conference information.
But there are several conferences with a duration of one day and more (see attached screen shot).
When I verify these conferences in conference manager they all had a duration below 60 minutes.
Is the display of the duration in web interface not the duration but the time passed since starting or is it a bug or something else.

Number of MeetingPlace Web servers:
- depends on the load, and whether external attendance (outside your organisation) is required. For enterprises you will use a minimum of 1 internal, 1 external server.
- Database is dependant whether you design for fault tolerance, and load related. On a MP Web server is okay, as long as you know the risks involved.
For the further description following URL may help you
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/7x/english/administration/web_servers_config_in_app_server.html
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/7x/english/installation/install_order.html

Similar Messages

  • Updated to the latest revision. Firefox will not display my chosen home page without clicking on home icon.

    Since latest update...Firefox will not allow a new page to be opened from a link in a current page. It will allow a new tab to be opened (with tabbed browsing checked) but i prefer a new page. Even in tabbed browsing links to things like a pdf will not work at all.
    Firefox WILL NOT close. X-ing out will close the window but I can not get back to Firefox without closing it in task manager.
    Firefox will not display my chosen home page without clicking on home icon.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Why Does OS X Change the Display of my Home folder?

    Howdy,
    I prefer an icon display of my HOME folder with 32x32 bit icons and a fairly tight spacing. I set this using Finder's Show View Options (Cmd-J) menu item. this seems to stick for a while, even through boots, but, at some point, it goes back to 24x24 bit icons with maximum icon spacing. Why won't the OS respect my display options in my own HOME folder?
    Good Luck,
    Herb Schulz

    The .DS_Store file should be owend and accessible by you, but if not for some reason then sudo will be needed. That is why I included it in the command.
    The settings in .DS_Store files can be inherited from parent folders as you browse the system, so one option is to remove all of them and have the system recreate them from scratch. There are a number of ways to do this, but an easy one is to use a tool like OnyX. In OnyX, go to the Maintenance > Rebuild section and uncheck everything except "Appearance of folders' content," and then click the Execute button.

  • Itunes 12.0.1.26 Display and group Home Videos in Genres

    Hi, Since the most recent version of iTunes has been installed on my mac, my home videos of which I have hundreds, are no longer displayed by genre. I used to have a list of genres down the left side of the screen. you could then click a genre to display the home videos within it.
    Is it still possible to display that view or similar? All I can seem to do is display all the home videos on one big screen. granted they are listed in genre order but its still a bit of a chew on to scroll right down to the genre i want.
    Hope someone can help me!
    Many Thanks!

    Hi, Since the most recent version of iTunes has been installed on my mac, my home videos of which I have hundreds, are no longer displayed by genre. I used to have a list of genres down the left side of the screen. you could then click a genre to display the home videos within it.
    Is it still possible to display that view or similar? All I can seem to do is display all the home videos on one big screen. granted they are listed in genre order but its still a bit of a chew on to scroll right down to the genre i want.
    Hope someone can help me!
    Many Thanks!

  • How can I format the y-axis to display durations?

    How can I cause the y-axis of this chart to reflect the values in Row 6 [Average Pace (Minutes per Mile)] of the corresponding table in duration format rather than number format. In other words, I need the y-axis to be a list of durations appearing like the figures in Row 6. Also, I need it to begin with the longest duration (10:00) and to climb to the shortest duration (5:00) at the top. I'll should mention that I already tried using the Inspector, but the "Duration" formatting option for the y-axis was not selectable while other formats were. I also tried formatting the y-axis this way to "Same as source data," and this didn't cause it to display durations either, though I had expected it to. Thanks in advance!
    Ryan

    Hi Ryan,
    Numbers can display only numeric values on the Y axis, and those values are always arranged from highest to lowest, with highest at the top.
    That said, here's what is possible:
    There is, of course, some manipulation of the data involved in this, as well as replacement of the value axis labels with custom labels in a text box.
    Here's what's happenng with the man behind the curtain:
    While the chart shows the data from row 6, it is actually graphing the data from row 7 (or whatever row you choose to place this data in.
    Row 7 uses a formula ( =-60*24*STRIPDURATION(B6) ) to first strip the Duration from the data in row 6, returning a number representing the fraction of a 24 hour day equivalent to the duration in row 6.
    It multiplies that number by 24*60 to convert it to the number of minutes (and fractions of minutes) in the duration, and changes the sign of the number to - (negative) so that the shorter values will be higher in the chart.
    Selecting row 7 and choosing Line Chart from the Charts Button's  menu produces, with one difference, the chart shown after setting the min and max values on the Y axis to -10 and -5 respectively, and incrementing the number of steps on the Y axis from 4 to 5).
    The difference, of course, is that the Y axis value labels all show negatic=ve numbers, with no m to indicate they show 'minutes.' To correct this, insert a text box and enter the six numbers 5 to 10, with each followed by an m and a return.
    Select the Text box, change the alignment to Right aligned (with the alignment button in the format bar), then drag the box in front of the Value axis labels with the 5s aligned.
    In the Inspector, choose Text inspector, then Text. Use the Space after Paragraph stepper to increase the setting until the 10 in the box aligns with the 10 in the Value Axis labels box. You may have to tweak the height of the chart slightly to achieve this alignment.
    Select the chart, then choose the Chart Inspector, then Axis. Use Choose Axis Options (for the Value Axis) to uncheck Show Value Labels.
    Regards,
    Barry

  • How to display a user message on WEBI Home page ?

    Hi all,
    How to display a user message on WEBI Home page ?
    like when ever the data gets scheduled at etl side i want to display a message a message on info view home page "new data is uploading" is this is possible to do ?

    Unfortunately this is not possible to do "out of the box".  There aren't any pre-configured options that will let you do this.  You're only real option is to try and modify the infoview source code yourself to do this.
    Regards,
    Shawn

  • How I set my Q5 so that reminders (for appointments, etc.) are displayed on my home screen?

    How I set my Q5 so that reminders (for appointments, etc.) are displayed on my home screen?
    Solved!
    Go to Solution.

    Swipe down from the top of your homescreen and select Settings>Notifications. Near the bottom you'll see in blue letters Lock Screen Settings. Click that and toggle Lock Screen Notifications to ON. Now whenever you have an appointment in your Calendar, it'll show up that day on your Lock Screen.
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • "Tiles cannot be displayed" error in Fraud Management web ui

    Hi, I'm trying to setup Fraud Management SP1 on NetWeaver. We done all steps from Fraud Management 1.1 SP01 (on SAP HANA) installation guide, but still have a small problem. When I logged to the application through Web UI client and opened one of available tiles I got the error “Tiles cannot be displayed; contact your system administrator”.
    I checked all OData services and authorizations, especially FRA_PERSONAL_SETTINGS_SRV. Looks like all of them are fine. I checked ICM logs, but there is nothing about this problem.
    Is there are any logs that can help to resolve this issue?
    thanks a lot for the helpful info.

    Hello Alexander
    if you are a SAP Partner please contact GRC-FRA component for such issues.
    Is this still an issue? Please check OSS Note #1932303
    Please also note that SP3 is at the moment the latest SP. SP04 is RTC on August 11th
    regards
    Nesimi

  • Display image in Smart camera web interface

    Hi!
    I need some assistance with LV-RT. 
    What I have succeeded is to enalble the web server on NI 17XX camera and successfully displayed a VI with Image Display on it. I thikn I got the hang of it. 
    What I would like to know is there another way to display images on the camera web page. I really do not need the whole VI up there just an image and a string with serial number. One way I know would work is to write an image file to the system memory and then embed that image to the web page, but I am not sure that is the best solution as writing process takes time and it is not recommended to write too often to the program memory (am I right?).
    So, is there some way to assign some object to say a memory bank and display it (without having to install the runtime maybe) on the page?
    Thank you for your attention,
    Mart

    Hey Mart,
    Going back to your original question; are you looking to stream images to a web page from your smart camera or simple see what your camera is seeing when you go to a particular site? Take a look at the sample project below. It is sort of a work around, but it posts an image to a web service. Essentially it snaps an image, saves it, and then posts the saved image to a web service. You will have to change the file path for the image, then build and deploy the webservice from the project view. Also, it would be beneficial to take a look at the webservice build specifications. The webbing to view the snapped image from your local machine would then be viewable from your web browsers at the address : "http://localhost/Stream_Service/ShowImag"
    Let us know if you have trouble getting this example working. Also, perhaps another visit to what your end goal is would be helpful. What was it that you had working?
    Hope this helps
    -Ben
    Message Edited by BCho on 04-10-2009 02:27 PM
    Hope this helps.
    -Ben
    WaterlooLabs
    Attachments:
    SnapWebService.zip ‏14 KB

  • How to display an error Message in Web Dynpro

    Hello,
    I want to display an error message in Web Dynpro. I'm using this,
    IWDMessageManager message = wdComponentAPI.getMessageManager();
    message.reportSuccess("<some relevant debug message>");
    However, the message is always shown at the bottom of the screen. It is possible to select the location in the screen for showing this object? Or what is the best way for doing this? I've tried to use a Label but I can't set the type (warning, error, info) it's only a message.
    Thanks
    Regards
    SU

    Hi,
    If you include the UI, it will display at the top of the screen..
    Please see below how to create a message in the message editor.
    http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
    and this is how you access the error message in the application ti display it to the end user
    http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
    Regards,
    Ganesh N

  • Adobe Reader DC, doesn't disable "Display PDF Document in the web browser" when option is unchecked.

    The option under Accessibility>Setup Assistanct to uncheck the "Display PDF Document in the web browser" doesn't correctly disable Display PDF in browser when unchecked, it still defaults to opening in Internet Explorer even after restarting the browser.  Confirmed this tested agianst with IE 8, 9, 10 and 11 with the same behavior.  Moving back to Reader 11.0.10 and using this same setting works flawlessly.  Anyone else experiencing this issue?

    I am out of the office until 1/22/13.
    If you need assistance with technical issues, please contact the Help Desk at:  518-402-8888
    >>> Test Screen Name <[email protected]> 01/17/13 10:30 >>>
    Test Screen Name http://forums.adobe.com/people/Test+Screen+Name created the discussion
    "Re: Adobe Reader XI enterprise deploy-disable display PDF in browser?"
    To view the discussion, visit: http://forums.adobe.com/message/5001441#5001441

  • Display a PDF in a web architecture

    All interested Flex developers,
    I was asked to post this entire issue to Flex forum.
    Flash Web applications cannot directly display PDF images (unlike PNG, JPEG, GIF images).
    Our network architecture is:
    user browser <---- Flex web app <---- SOAP/WSDL protocol <---- backend PDF file server
    The Flex web app receives a Base64 PDF and decodes to a ByteArray[]
    A) Can anyone map a PDF ByteArry to JPEG or PNG?
    B) Can we write a temporary file.PDF in the web server?
    Then we could display the temporary file using a web iFrame.
    C) Does someone have a neat idea to display a PDF in our web apps without prompting the user?
    thanks,
    Medical Flash developers

    I agree that option A would be a pretty intensize task to map PDF bytes to bitmap bytes.
    For option B,  there's a good post here about how you can upload a bytearray by loading the data manually into a FileReference: http://www.pavlasek.sk/devel/?p=10.  He even gives some code for a Java servlet that will accept the ByteArray.
    -Mike
    ramblingdeveloper.com

  • DISPLAY variable in R12 Forms/Web tier

    Hello everyone,
    Just wanted to clarify something about the DISPLAY variable in R12 Forms/Web Tiers.  Is it necessary to have DISPLAY variable set to an active X session(Vnc) server session on Forms/Web Tiers? I understand that we need to do it for CM/Report/Admin tiers. Please confirm.
    Thanks

    968420 wrote:
    How about Forms/Web tiers?
    It's required is some cases (like the following), and I would recommend having it set on all application tier nodes to the same value.
    s_display -- Required only if you need to access graphs/charts, OLM implementation, ..etc (any page that requires DISPLAY to be set)
    Cannot Play The Course From The Class Details Page (Doc ID 391815.1)
    Receive Error When Attempting To Open A Work Plan Gantt Chart View (Doc ID 306413.1)
    s_forms-c4ws_display -- Required if you have SOA Gateway integrated
    Oracle EBS R12 Context Variables (Doc ID 458282.1)
    Thanks,
    Hussein

  • Displaying ABAP report on a web browser

    Hi,   I want to develop a code for displaying ABAP report on a web browser.

    Hi Rao,
    Are you looking for running ABAP report from portal / WDA?
    There are lot of similar threads available on SCN: to run ABAP report in WDA.
    Calling a TCODE PA60 from Web dynpro ABAP
    Call TCode MM02 from ALV
    Please search in SCN, hope you may find many threads.
    Regards,
    Rama

  • How to display smartform as PDF in web dynpro java

    Hi,
    Where can I find sample program to display smartform as PDF in web dynpro java.
    Thanks.
    Regards,
    Henry

    1. Create a smart form in the R/3 side
    2. Now create a function module with the corresponding export parameter:
    3. Make sure that the function module is marked remote enabled. 
    4. In NWDS  create an Adaptive RFC model which points to the FM created in R/3 under the webdynpro application
    5. Now create an application and view inside it to display the PDF and Insert a frame inside the view
    6. Create a  value node and an attribute say url of type string inside that node and bind it to the source
    7. In the doInit() method place the following code
    >    ZTest_Pdf_1_Input input = new ZTest_Pdf_Input();
    >    wdContext.nodeZTest_Pdf_Input().bind(input);      
    >    try {                       
    >            wdContext.currentZTest_Pdf_InputElement().modelObject().execute();
    >            }
    >  catch (Exception e) {
    >                        e.printStackTrace();
    >            }          
    >  wdContext.currentInternalElement().setUrl(convert(wdContext.currentOutputElement().getBin_File()));       
    Inside that view create a method to convert the string to url so that it can be passed as a string to the setUrl method of the currentContextElement() , say convet(byte[] doc_content) which return a string.
    Inside that methos write the following code,
    >         String url = "";
    >           WDWebResourceType webResType = WDWebResourceType.PDF;
    >            IWDWebResource webResource = WDWebResource.getWebResource(doc_content, webResType);
    >            try {
    >                        url = webResource.getURL();
    >            }
    >  catch (Exception e) {
    >                        e.printStackTrace();
    >            }          
    >            return url;
    Hope It will be helpful
    Regards,
    Sam Charles J.

Maybe you are looking for