MeetingPlace conference call on CCM MoH

Has anyone seen this, or have any ideas? Have a MeetingPlace Enterprise 5.4.0 system and now and then, people on hold on Call Manager (multicast MoH) can here meetingplace conference calls when they are on hold with the CCM MoH playing. The people on the MeetingPlace Conference call do not hear the person on hold or the CCM music.
The Call Manager and Meetingplace are completely seperate servers. The Call Manager version is 4.1(3) SR4D if it helps.
The network is clean, no errors, and can't find where this problem is coming from. It does not happen all the time and doesn't happen on every meetingplace conference call.
I don't know much about Meetingplace, does it use Multicast for its audio conferences? I thought they were kept local to the audio server unit (?).

For the sake of closing out this question...  The answer was found deep in a Cisco wiki post.
Suppressing Music-On-Hold
You can configure Cisco Unified Communications Manager to play music for the held party when users put a call on hold. However, if a user places a meeting on hold, the music plays into the meeting until the user retrieves the held call. To prevent this, you can configure Cisco Unified Communications Manager not to play music on hold for calls routed through Cisco Unified MeetingPlace H.323/SIP IP Gateway.
Specifically, make sure you do not assign to the Cisco Unified MeetingPlace H.323/SIP IP Gateway a Media Resource Group List that includes any Media Resource Group that includes Music on Hold servers, as the MeetingPlace IP Gateway can join a multicast Music-On-Hold (MoH) group. Since MeetingPlace is a transmit/receive environment, being put on hold can mean meeting participants listen to MoH, as well meetings in progress to devices configured to participate in the multicast group, resulting unexpected and undesirable privacy breaches.
As an additional workaround/resolution, if the customer is using Cisco Unified Communications Manager (CUCM) Version 6.1 and later, verify the CUCM Service Parameter "Send Multicast MOH in H.245 OLC Message" is set to False.

Similar Messages

  • Can MeetingPlace Express make conference calls with just meeting ID and meeting password?

    Hi,
    We have MeetingPlace Express version 2.1.1.2. It is working fine and everything but we need to change the way it works.
    For audio only conference calls, we need the users to be able to initiate meetings without having to enter their profile ID and profile password.
    For example when a caller dials the MPE number and presses 1 to start a meeting, he has to enter his PIN code to be authorized to start a meeting, we want to exclude this feature, so that any one who dials the number and wants to start a meeting, he will get a meeting ID and meeting password directly.
    Is this possible in MPE 2 ? Appreciate your help please, thanks in advance.

    I poked around a system I have nearby and can't find a setting that is an obvious choice for this one. I experience the same behavior at the 30 minute mark.
    One alternate approach you may try is called a continuous meeting. The viability of this approach depends on how this is being used:
    This likely will NOT work if you have lazy users who can't manage their time.
    The reason is a continuous meeting always consumes the licenses for itself, even if there are not participants currently in it.
    This may work if you have defined groups of users who repeatedly meet as a group in an ongoing manner.
    A continuous meeting is a scheduled meeting that reserves ports and a meeting ID indefinitely, so that
    participants may join the meeting at any time on any day. Nevertheless, a continuous meeting is in
    session only when at least one participant is in the meeting.
    I searched high-and-low for documentation on this and the only two items that I can turn up are these:
    http://www.ciscosystems.org/en/US/docs/voice_ip_comm/meetingplace_express/1_1/english/administration/guide/bagmtgs.pdf (page five)
    http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express,_Release_2.x_--_How_to_Configure_Scheduled_and_Reservationless_Meetings#Enabling_Users_to_Schedule_Continuous_Meetings
    One downer though: I cannot get the Continuous option to appear on my MPE 2.1.1.2 hotfix 36 (last release) system. Either I'm missing an option myself or something is wrong in this version.

  • Conference call failure

    I am part of a non-profit that irregularly holds board meetings via a Skype audio conference call.  We usually have 7-8 members, all free skype users, in on the calls, but on our last one we had 10.  It was an utter failure.  Most members could not hear all of the contributions made by others -- audio would cut out while they were speaking.  Several couldn't hear anyone else talk for long stretches.  At least one never heard anyone else at all.  When we had conferences with the fewer number, one particular person had these kind of problems (which I attributed to her connection speed), but not everyone had them as happened this time.  Even the host (chairman) was having the same difficulties.  He thought we may have crossed some threshold in going from 8 to 10.  After nearly an hour of struggling to make ourselves heard, we gave up on the audio and did a few crucial agenda items via chat before ending the call.
    Would having the host of the conference call be a premium user possibly eliminate such problems, or do we have to address the Internet connection speed of the host?  (Or both, maybe?)
    It is really difficult for this non-profit to get its board members together at one time.  It can take a month or more to re-schedule after a failure like this.  We need something reliable, which was why we chose Skype in the first place.

    What protocol are you running on the GW??
    MGCP? H323?
    If H323, have you properly configured the codecs??? H323 uses G729 by default if nothing is configured.
    CUCM CFB only supports G711 and for MOH to work with other codecs you need to enable them under IPVMS service parameters.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • CONFERENCE CALL IN ATA PHONE

    Hello all,
    I need to configure two telephone that are attached on FXS card to make conference call.
    Somebody know how can i to configure this feature?
    Thanks,

    Hi, first need to add the ATA as a SCCP device. CCM Page->Device->Add New and select ATA. Then you can configure both FXS ports like IP Phones, you can assign then partition, CSS, MRGL and others parameters.
    This link can help you to configure the initial values of the ATA.
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800a892f.shtml
    Hope this help.
    David

  • Did you know that the  carrier Verizon offer the merge conference call or internet while on call on the iphone? Only AT

    Did you know that you can't use the merge function on a iPhone 4s with Verizon Wireless? They blocked the function only AT&T has it, also Verizon doesn't allow browsing the Internet while on a call like AT&T, huge mistake Verizon. For people that conference call, don't get tricked into changing carriers until Verizon changes this feature.

    Not sure about the merging of calls, but being able to browse the internet while on a call can't be done with CDMA technology -- so it's not that Verizon doesn't allow it, it just can't be done on their network. This is old news ...

  • Why my iPhone wont let me add to conference call or hang up on a particular person?

    Why my iPhone wont let me add to conference call or hang up on a particular person?

    Hey D.j.,
    Welcome to the Apple Support Communities. The following article will go over the Conference features and will provide some help.
    iPhone: Using Conference
    http://support.apple.com/kb/ta38608
    If you continue to have issues with the Conference feature, the next step would be to reset settings or backup and restore the device and setup as new. To reset settings on the device: Settings > General > Reset All Settings
    If you need to restore your iPhone, the following article will assist with this.
    iOS: How to back up your data and set up as a new device
    http://support.apple.com/kb/HT4137
    Regards,
    -Norm G.

  • HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls.   please help as I use it for conference calls

    Hi   I use my phone for conference calls and use the microphone jack to connect to speakers.      It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.   

    Happy to have been of help. Hope all goes smoothly.
    BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
    https://discussions.apple.com/static/apple/tutorial/mark.html
    and
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    Regards.

  • Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

    I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
    Some of the scenarios that I have experienced is:
    1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
    2. Sometimes the second number gets dialed, cannot merge the calls.
    3. After talking to the second person, cannot go back to the first call.
    I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
    Anyone experienced this before? Any suggestions?

    Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
    iPhone 6; iOS 8.1.3; Carrier: Verizon

  • Conference calls all of a sudden do not work??

    We have a Call Manager 5.1 with MGCP controlled gateways. Out of no where our ablility to ad hoc conference call does not work. We connect the calls and no one can hear one another. Any suggestions as to what could be the cause? Any feed back would be great.
    Rgds,
    Vicky

    Here is the Troubleshooting and Debugging VoIP Call Basics.
    http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094045.shtml

  • Why can I no longer connect a conference call?

    Since the iOS 7 update, I am unable to connect to a conference call. Is this an ongoing problem?

    It is similar to call waiting. The calls are swapped rather than connected.

  • Verizon recording cut into my conference call

    Verizon recording cut into my conference call and everyone (100 people on the call) heard it. I was listening to the conference with the mute on (*6). My phone rang--which everyone heard--and the Verizon message that goes to the caller came on. Everyone on the conference call stopped talking as verizon said, "The person you are trying to call cannot be reached at this time. Please call later." This went over the conference call twice. Can I prevent this or is it a Verizon glitch?

    Whilst I have no idea about Verizon ,I use a similar device in UK receiving cellular over broadband in property and I have wired broadband with unlimited use
    However the device is certainly using bandwidth over my wired service when active
    I would try to get a definitive does it or doesn't it and if not  then they will cover any cost if they are wrong

  • Conference call number and code in email on iOS 7

    I get emails inviting me to a conference call which typically has a 1-800 telephone number followed by a few lines later for the participant code.
    e.g.,
    Dial in:  1-866-123-xxxxx
    Host Code:  123484xx
    Participant Code:  237284xx
    If this info were in the iPhone's calendar invite, I know there are apps like Tempo in the App Store that can parse calendar invites and give you the option to dial: 
    Host:  1-866-123-xxxxx,,123484xx  or
    Participant:  1-866-123-xxxxx,,237284xx
    What's the solution for email?  The iPhone recognizes  1-866-123-xxxxx as a dialable number, but how do I get the Code pasted?  I've tried copying and pasting the Code but there's no place to paste it in after the call is in progress.
    Is the only workaround to copy paste into a calendar invite and then use Tempo to figure it out?

    Check Settings App > General > Text size to see if the slider has been moved one way or the other.
    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • CONFERENCE CALLS DONT WORK ON OS 7 ALONG WITH RESPOND WITH TEXT WHILE ON A CALL

    BEFORE UPDATING MY IPHONE 5 TO OS 7, I COULD MAKE OR ADD ON UNLIMITED CONFERENCE CALLS.
    IMMEDIATELY AFTER UPDATING NOW I CAN ONLY CALL ONE PARTY AND ADD ONE MORE ON TO THE CALL.  SO BASIC THREE WAY CALL.
    ALSO I HAVE NOTICE AFTER UPGRADING THAT IF I WAS ON A CALL AND ANOTHER CALL CAME IN I COULD BRIDGE THE TWO CALLS TOGETHER.  THAT IS NO LONGER POSSIBLE IN OS 7.
    MY CARRIER IS VERIZON AND I SPOKE TO THEM IN REGARDS AND THEY NOTE I AM NOT RESTRICTED ANYWAY SINCE I AM A COMPLETE UNLIMITED USER.
    THE OTHER ISSUE I HAVE NOTICE RIGHT AFTER THE UPGRADE THAT YOU CAN NO LONGER RESPOND TO A INCOMING CALL IF YOUR ON A CALL WITH "RESPOND WITH TEXT"   THIS ONLY WORKS NOW IF YOUR NOT ON THE PHONE WHICH YOU CAN RESPOND WITH TEXT.
    I WAS HOPING BY NOW APPLE WOULD HAVE A PATCH FOR THESE ISSUES, I CAN NOT BE THE ONLY PERSON HAVING THEM WITH OS 7.

    Please stop YELLING!
    MMS messages and iMessages require a data connection. Due to the nature of Verizon's network, you can not access cellular data while on a call.
    As for conference calling, call Verizon back and escalate the call until you get someone who understands the word "provisioning". Have them re-provision your account.

  • External callers unable to join conference calls

    Scenario:  A conference call is set up using the scheduler.  Lync users are able to join the conference calls.  Users from outside PSTN are unable to join the call.  They get to the attendant, and are told they are being joined to the
    conference, then get a message "Sorry, I can't seem to connect you to your meeting right now.  Goodbye." and the call disconnects.
    Looking at call traces, I see the following error messages in the CAAServer log:
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.EndTransfer
    Source: caacall.cs(3631)
    Local Time: 08/26/2014-18:28:36.161
    Sequence# : 0001BE31
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 0
    Original Log Entry :
    TL_ERROR(TF_DIAG) [0]0BB0.0BA8::08/26/2014-22:28:36.161.0001be31 (CAAServer,CaaCall.EndTransfer:caacall.cs(3631))[64624070]ConferenceFailureException. ConferenceID=[91127] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.HandleUnexpectedException
    Source: caacallerrorhandling.cs(51)
    Local Time: 08/26/2014-18:28:36.226
    Sequence# : 0001D265
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.226.0001d265 (CAAServer,CaaCall.HandleUnexpectedException:caacallerrorhandling.cs(51))[64624070][Enter] exception=[Microsoft.Rtc.Collaboration.ConferenceFailureException:The operation failed due to a response
    from the server. For more information, examine the properties on the exception and inner exception.
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Collaboration.McuSession.EndSendCommandInternal(IAsyncResult result)
       at Microsoft.Rtc.Collaboration.AudioVideo.AudioVideoMcuSession.EndTransfer(IAsyncResult result)
       at Microsoft.LiveServer.Caa.CaaCall.EndTransfer(IAsyncResult asyncResult, Boolean& retry, Exception& caught)
    Detected at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Collaboration.ConferenceFailureException..ctor(String message, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.CreateConferenceFailureException(ConferenceCommandResponse commandResponse, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessCccpResponse(SipMessageData messageData, responsetype response, Boolean& isPendingResponse)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessStatusMessage(SipMessageData statusMessageData, responsetype response)
       at Microsoft.Rtc.Collaboration.Conferencing.StatusMessageReceivedWorkItem.Process()
       at Microsoft.Rtc.Signaling.AsyncWorkitemQueue.ProcessItems()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessing()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessingCallback(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)] m_conferenceID=[91127] m_conferenceUri=[sip:[email protected];gruu;opaque=app:conf:focus:id:4TPY99KF] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.HandleUnexpectedException
    Source: caacallerrorhandling.cs(51)
    Local Time: 08/26/2014-18:28:36.226
    Sequence# : 0001D265
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.226.0001d265 (CAAServer,CaaCall.HandleUnexpectedException:caacallerrorhandling.cs(51))[64624070][Enter] exception=[Microsoft.Rtc.Collaboration.ConferenceFailureException:The operation failed due to a response
    from the server. For more information, examine the properties on the exception and inner exception.
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Collaboration.McuSession.EndSendCommandInternal(IAsyncResult result)
       at Microsoft.Rtc.Collaboration.AudioVideo.AudioVideoMcuSession.EndTransfer(IAsyncResult result)
       at Microsoft.LiveServer.Caa.CaaCall.EndTransfer(IAsyncResult asyncResult, Boolean& retry, Exception& caught)
    Detected at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Collaboration.ConferenceFailureException..ctor(String message, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.CreateConferenceFailureException(ConferenceCommandResponse commandResponse, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessCccpResponse(SipMessageData messageData, responsetype response, Boolean& isPendingResponse)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessStatusMessage(SipMessageData statusMessageData, responsetype response)
       at Microsoft.Rtc.Collaboration.Conferencing.StatusMessageReceivedWorkItem.Process()
       at Microsoft.Rtc.Signaling.AsyncWorkitemQueue.ProcessItems()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessing()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessingCallback(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)] m_conferenceID=[91127] m_conferenceUri=[sip:[email protected];gruu;opaque=app:conf:focus:id:4TPY99KF] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.TransferCompletedQueued
    Source: caacall.cs(3739)
    Local Time: 08/26/2014-18:28:36.231
    Sequence# : 0001D269
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.231.0001d269 (CAAServer,CaaCall.TransferCompletedQueued:caacall.cs(3739))[64624070]Call Transfer Failed. InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    The unexpected error entry includes this information in the diagnosticUtils section:
    Component: CAAServer
    Level: TL_INFO
    Flag: TF_DIAG
    Function: DiagnosticUtils.TryCreateSignalingHeader
    Source: diagnosticutils.cs(269)
    Local Time: 08/26/2014-18:28:36.231
    Sequence# : 0001D268
    CorrelationId :
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_INFO(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.231.0001d268 (CAAServer,DiagnosticUtils.TryCreateSignalingHeader:diagnosticutils.cs(269))Creating SignalingHeader for InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4], header-name=[ms-diagnostics], header-value=[10010;Reason="Gateway
    side Media negotiation failed";Source="LYNC-FE.itprocare.com";component="MediationServer";sipresponsetext="Invite with Replaces failed because Gateway side reinvite failed.";DialogID="f94f35b9-7f5d-4bcd-94a8-de0fb2d8c4c6;df1bec7e24;24010080"]
    Which matches up with an error in the SIP trace:
    TL_INFO(TF_PROTOCOL) [0]0DEC.0A48::08/26/2014-22:28:36.151.0001ac66 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
    Trace-Correlation-Id: 3329945913
    Instance-Id: 00000688
    Direction: outgoing
    Peer: lync-fe.itprocare.com:51307
    Message-Type: response
    Start-Line: SIP/2.0 491 Invite with Replaces failed because Gateway side reinvite failed.
    From: <sip:[email protected];gruu;opaque=app:conf:audio-video:id:4TPY99KF>;tag=26f350618b;epid=6DF0663499
    To: <sip:[email protected];gruu;opaque=srvr:MediationServer:BMFt1DuKo1KYsGtnqeobCwAA;grid=9d179e4c3aeb4fd7aedd36d7853ad98b>;epid=26F55811B8;tag=2e6beef249
    CSeq: 5 INVITE
    Call-ID: af099053-d8aa-4ca4-9820-936e8522611c
    Via: SIP/2.0/TLS 10.160.1.47:51307;branch=z9hG4bKeb2e7ed6;ms-received-port=51307;ms-received-cid=9B00
    CONTENT-LENGTH: 0
    P-ASSERTED-IDENTITY: <sip:5853307343;[email protected];user=phone>
    SERVER: RTCC/4.0.0.0 MediationServer
    ms-diagnostics: 10010;source="LYNC-FE.itprocare.com";reason="Gateway side Media negotiation failed";component="MediationServer";SipResponseText="Invite with Replaces failed because Gateway side reinvite failed."
    ms-diagnostics-public: 10010;reason="Gateway side Media negotiation failed";component="MediationServer";SipResponseText="Invite with Replaces failed because Gateway side reinvite failed."
    ms-endpoint-location-data: NetworkScope;ms-media-location-type=intranet
    Message-Body: –
    $$end_record
    The trunks are configured with REFER off and MediaBypass Off.
    We have recently moved to a direct SIP trunk from a vendor on Microsoft's Certified list.
    Lync version is 2010, with the latest CUs applied.  All other calling appears to be working correctly.  The certificate on the servers are using the SHA1 algorithm (I have seen some similar issues discussed if this was not the case.)
    At this point, I have reached the end of my immediate troubleshooting skills with this system.  Can anyone offer any suggestions as to what might be going on here?
    Thanks for any help.
    -Tim
     

    Hi,
    Please check if the default gateway associated to the Mediation Server is up or not.
    Please check if Media traffic on the Gateway be blocked with the issue of wrong encryption. Make sure it is using SRTP (not RTP). If you use RTP, please change it and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I want to know what's the conference call in community level and how to use it

    i want to know what's the conference call in community level and how to use it

    Welcome to Apple Support Communities
    Conference calls are got when you reach level 4. Sometimes, ASC hosts may do a conference call about something related to Apple Support Communities. You will be notified through mail or through the "Using Apple Support Communities" forum.
    The last community calls were only for level 6 and higher users, so it's possible that you don't get invited to any until you reach level 6

Maybe you are looking for