MeetingPlace Express 1.1 NFR Installation Problems

Hi.
On the installation guide of meetingplace express shows the MCS 7825H-3.0-IPC1 as a supported server and the DVD should be capable of booting itself and install the Linux OS and then the Cisco Application.
I'm trying to install the NFR in an MCS-7825H-800 instead of the MCS 7825H-3.0-IPC1 but the DVD will not boot automatically. The MCS-7825H-800 comes with a CD ROM but I changed it to a DVD ROM. Any ideas? I don't have an MCS 7825H-3.0-IPC1 at the moment and I would like to install the MeetingPlace Express NFR to test it out.
Thanks in advanced,
-Jose

Installing Cisco MeetingPlace Express, refer to the
http://www.cisco.com/en/US/products/ps6533/products_installation_guide_chapter09186a00805a7988.html#wp1164664
http://www.cisco.com/en/US/products/ps6533/products_installation_guide_book09186a008057b547.html

Similar Messages

  • Oracle Express 6.3.4 Installation problem

    Hi,
    We have installaed Oracle Express 6.3.4 in HP Truc 64 M/C. When trying to start Express 6.3.4 version software, i get the foll error as mentioned below. It shows OES_Request -read fails, error 35. Please can anyone let me know what should be done to resolve the error and the server gets started.
    [152524] 10/07/2010 00:45:13 xsdaemon: start_oes - pid: 152529; path: /db/express634/olap/oes634/service/expres63; name: ExpSrv634
    [152524] 10/07/2010 00:45:13 xsdaemon: listening...
    [152524] 10/07/2010 00:45:13 xsdaemon: Initializing NCRO.
    [152524] 10/07/2010 00:45:13 xsdaemon: Using port number: 11798
    [152524] 10/07/2010 00:45:13 xsdaemon: Binding socket.
    [152524] 10/07/2010 00:45:13 xsdaemon: Calling listen(). (Portno 5678)
    [152524] 10/07/2010 00:45:14 xsdaemon: Got activity on control pipe
    [152524] 10/07/2010 00:45:14 xsdaemon: WAKEUP called.
    [152524] 10/07/2010 00:45:15 xsdaemon: got request from OES (pid 152529)
    [152524] 10/07/2010 00:45:15 xsdaemon: OES_REQUEST - read fails, error 35
    [152524] 10/07/2010 00:45:16 xsdaemon: Got activity on control pipe
    [152524] 10/07/2010 00:45:16 xsdaemon: OES (pid 152529) has terminated
    Thanks,
    Ramanathan

    I'm not able to get the solution for the message "xsdaemon: OES_REQUEST - read fails, error 35". Pls can anyone suggest since i tried max option. Also the error message is not avaialble in metalink too.

  • Disk space problem on MeetingPlace Express

    I get the email below daily. I'm thinking it's ok to cat /dev/null the cma.log file?
    I also think I might be able to do the same thing to stdout.old?
    Anything else I should try other than the instructions?
    * Directory listing
    [mpxadmin@meeting ConfSchd]$ ls -la
    total 3036516
    drwxrwxr-x    2 mpxadmin mpx          4096 Aug  2 13:27 .
    drwxrwxr-x   17 root     mpx          4096 Nov  4  2009 ..
    -rw-rw-r--    1 mpxadmin mpx             0 Nov  4  2009 ActConf.lk
    -rw-rw-r--    1 mpxadmin mpx             0 Nov  4  2009 Attach.lk
    -rw-rw-r--    1 mpxadmin mpx             4 Dec 22  2012 confId
    -rw-rw-rw-    1 mpxadmin mpx           391 Apr  5  2010 pegstats
    -rw-rw-r--    1 mpxadmin mpx        255639 Aug  2 14:25 stderr
    -rw-rw-r--    1 mpxadmin mpx       1152127 Dec 22  2012 stderr.old
    -rw-rw-r--    1 mpxadmin mpx      516106727 Aug  2 16:50 stdout
    -rw-rw-r--    1 mpxadmin mpx      2588797008 Dec 22  2012 stdout.old
    -rw-rw-r--    1 mpxadmin mpx             0 Nov  4  2009 TCMap.lk
    [mpxadmin@meeting ConfSchd]$
    * EMAIL
    This is an automated message from the MeetingPlace Express system with
    hostname [meeting.afgrp.com] to inform you that disk space is low.
    Details on where the problem is and how to resolve it are indicated below.
    Low space in partition /. Percent used = [90].
    The following files might cause trouble. However, inspect each one to make sure.
    Look specifically for large files with old timestamps. Also, note that some of
    the files indicated might have been previously mentioned. In this case, use the
    prior instructions to handle these files rather than the instructions below.
    If you are uncertain, contact Cisco TAC for confirmation/advice.
    For the files below, use the following procedure to empty these files rather than
       delete them outright.
             1. For each file to be emptied do:
                 cat /dev/null > <filename>
             2. After all files that you wish to empty have been emptied, do:
                 su   // Enter 'root' password.
                 mpx_sys restart
    -rw-rw-r--   1 mpxadmin mpx     283120801 Apr 11 02:00 /var/mp/ConfSchd/stdout
    -rw-r-----   1 root     root     127007041 Dec 22 05:30 /var/spool/compaq/cma.log
    In general, to free up disk space where it is uncertain exactly what files are in question,
       do the following:
    1. In general, go to places like /root, /mpxadmin, /tmp and do "ls -la" to look
         for large files. If a file is large, old, and seems like some kind of log or
         error file, it could be a candidate for deletion.
    2. Generally files of type log (*.log), stderr, stdout, or txt (*.txt) are the
         best candidates to look for. A good command to look for these types of
         files with size of 10,000,000 bytes or larger is:
           find / -name "<file type>" -exec ls -la {} ; | awk '{if( >=10000000) {print} }'
         For example, to look for all log files 10,000,000 bytes or larger on
           the entire system:
             find / -name "*.log" -exec ls -la {} ; | awk '{if($5 >= 10000000) {print} }'
    3. If you have a specific problem partition that you are trying to reduce size
         for, do the following:
         1. Find out the directory name of the top of the partition from "df".
         2. "cd" to that location.
         3. Then do: du -x -b --max-depth=1
         4. Look for the directories that are really large.
         5. Then "cd" into the worst subdirectory (or subdirectories).
         6. Get a list of all large files from current directory location and lower:
               (This example assumes 10,000,000 bytes and a check for .log files.
                   Note the starting location of '.' (current location) rather
                   than '/' (entire disk) ).
               find . -name "*.log" -exec ls -la {} ; | awk '{if($5 >= 10000000) {print} }'
    Complete output of the 'df' command:
    Filesystem           1K-blocks     Used Available Use% Mounted on
    /dev/sda1             6048320   5111204   629876 90% /
    /dev/sda6             4032092   767336   3059932 21% /common
    /dev/sda2             8064304   6492268   1162380 85% /db
    /dev/sda9               256667     8416   234999   4% /grub
    /dev/sda7           122154520   110696 115838720   1% /mpx-record
    /dev/sda5             5036284   3577128   1203324 75% /opt
    /dev/sda3             6048352   109032   5632080   2% /partB
    none                   1026932     22624   1004308   3% /dev/shm

    Hi Josh,
    It seems that the root partition of the MeetingPlace Express server is almost full. I have attached a document for your reference which can be used to minimize the disk space issues.
    Once the steps mentioned in the attached document are completed, run the command "df" to check the disk space.
    If you do not see much improvement in the root partition, then in that case some other files might need to be removed from the server to increase the root partition space.
    If any of the partitions reach upto 90% or above, then the server might behave unexpectedly.
    Feel free to revert if you have face any issues or have any queries.
    Regards,
    Rishabh

  • MeetingPlace Express strange problem !

    Environment:
    MeetingPlace Express 1.1.1.11
    CallManager 4.1(3)sr2
    Voice Gateway 1: 2821 (c2800nm-advipservicesk9-mz.124-4.T.bin) + VIC2-4FXO
    Voice Gateway 2: 2621XM (c2600-advipservicesk9-mz.123-14.T5.bin) + NM-2V + 2* VIC-2FXO
    VG1 connect to CallManager using H.323, VG2 connect to CallManager using MGCP
    MeetingPlace Express connect to CallManager using H.323.
    Problem:
    When dial-in from PSTN to VG1 and VG2, both are well; but when using "Find-Me" feature, MeetingPlace express dial to user, users via VG2 are can sent dtmf with MeetingPlace Express, but users via VG1 can not sent any dtmf digit to MeetingPlace Express. So users via VG1 can not enter the meeting.

    For more information the following url would be useful,
    http://www.cisco.com/en/US/products/ps6533/products_installation_guide_book09186a008057b547.html

  • EPM 11.1.2.1 Installation problem on Laptop (Windows Server 2008 R2 x64)

    Dear All,
    I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
    I installed Hyperion Foundation. The installation and configuration went through successfully.
    I am facing two problems:
    Problem 1
    When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
    Quote
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
    End-quote
    Problem 2
    Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
    Quote
    The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
    End-quote
    I tried checking everything but can't seem to figure out what's going wrong.
    I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
    http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
    It would be very grateful if someone can have a look and help me.
    Many thanks in advance for any help / pointers / suggestions.
    - Neil

    Hi Pablo,
    Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
    Re: Problem 1
    a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
    -----<start>--------
    <Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
    Enter username to boot WebLogic server:
    ------<end>-----
    I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
    Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
    -----<start>--------
    ####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
    WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
    ####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
    Listen Address          :28080
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
    Listen Address          :28443 (SSL)
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
    >
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
    ####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
    ####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
    ####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
    ####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
    ------<end>-----

  • How to change system time on Cisco MeetingPlace Express Server

    How to change system time on Cisco MeetingPlace Express Server
    Model MCS-7825-I4

    Hi Vijay,
    As per the install guide for MPX 1.x as well as 2.x "Caution! Be sure you enter the correct date and time. You must reinstall the Cisco Unified MeetingPlace Express operating system and application if you need to change the date or time of your server in the future."
    http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express,_Release_2.x_--_Configuring_the_Cisco_Unified_MeetingPlace_Express_Server#Configuring_the_Cisco_Unified_MeetingPlace_Express_Server
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/meetingplace_express/1_2/english/installation/guide/iug/mpxinst3.html
    HTH
    Manish

  • MeetingPlace Express 2.1.1.2 Dial Out was not Successful

    I'm configuring a MeetingPlace Express v.2.1.1.2 and I can't make the MPX do the call to the guests of a meeting.
    I make the configuration test in: Services > Logs > Verify Configuration > Call configuration verification and show the following error:
    ==============================================================
    ==============================================================
    Call-Config Report
    Summary   
    WARNING:The H.323 ID should match the host name   
    Valid E.164 Address has been configured   
    H.323 gateway has been configured   
    Error: Dial Out was not Successful   
    Call-Config Report Details
    H.323 Details   
    H.323 enabled : YES   
    E.164 address : 196   
    H.323 ID : mpxadmin   
    H.323 gateway 1 : 010.145.002.030   
    SIP enabled : YES   
    DialOut Session Summary  
    VUI Configuration: 250 Sessions, 250 Confs   
    *** VUI INTERNAL STATUS UTILITY ***
    DebugMenu:   
    1) Quick Status of all Ports 4) Make Test Call   
    2) Verbose Status of Port Range 5) Show All Confs   
    3) Display complete Port Information 0) Quit   
    Enter the Command (0 -- 100) []: You entered 4.   
    Enter destination for your call: The Telephone Number is 196. Len is 3   
    Do you want specific ports? (t -- F): You entered f.   
    Placing Call .....Call was unsuccessful: Ring No Answer.   
    DebugMenu:   
    1) Quick Status of all Ports 4) Make Test Call   
    2) Verbose Status of Port Range 5) Show All Confs   
    3) Display complete Port Information 0) Quit   
    Enter the Command (0 -- 100) []: You entered 0.
    ==============================================================
    ==============================================================
    That parameter could check?
    Here I place information on the configuration of my network:
    CUCM v.7.0 --> 10.145.2.10
    Voice Gatweay --> 10.145.2.30
    In CUCM > Device > Gateway --> Gateway: 10.145.2.20 | Description: Cisco MeetingPlace Express | Type: H.323 Gateway | IP: 10.145.2.20
    Please expect your valuable help!
    Thanks a lot!
    ErnestoG

    hi Ernesto,
    As the problem you are facing is a dial out issue on MPE,  go
    through the checklist mentioned below in order to confirm the configuration
    is intact.
    Here is the checklist :
    1.    Ensure that H323 GW is defined on CCM/CUCM.
    Device > Gateway > find.
    Look for a device name that equals either MPE's hostname, FQDN, or IP
    Address.
    2.    Ensure that h323 Gateways are configured on MPE.
    MPE Administration Center > System Configuration > Call Configuration > H323
    Configuration
    Ensure that h323 is enabled.
    Ensure that you have entered your CCM's IPs in h323 Gateway 1, 2
    3.    Ensure that CCM's interface with MPE is up.
    Ensure that MPE's IP Address is listed under the "IP Address" column.
    Ensure that this IP Address is that of the FIRST NIC on MPE, not the second.
    4.    Verify that MPE has the CSS required to call the destination.
    FIRST, FIND MPE's CSS:
    When MPE places a call, the CSS in question is Device > Gateway > MPE-GW >
    Inbound
    THEN the relevant config is under Device > "Call Routing Information -
    Inbound Calls" > Calling Search Space
    SECOND, FIND DESTINATION PATTERN's PARTITION:
    If the destination is an IP Phone within the CCM/CUCM Cluster, then the
    relevant config is under Device > Phone > click on Directory Number in CCM.
    If the destination is a PSTN endpoint/phone, then the relevant config is
    under Device > Route Pattern.
    5.    Ensure that your user profile is set to allow outdials.
    MPE Administration Center > User Configuration > User Profile Management >
    Your User Profile > Can call out of meetings should be set to "Yes".
    6.    When you place a call from  from the CLI, the system applies permissions
    from the "Guest" User profile since mpxadmin  or root are not Users within
    the MPX application. To allow this to work, you need to  verify two
    settings:
    MPE Administration Center > User Configuration > User Profile Management >
    Guest > Can call out of meetings should be set to "Yes".
    Ensure that the Guest profile is not in a "locked" state.
    MPE Administration Center > System Configuration > Usage Configuration >
    Allow Guest outdials should be set to "Yes".
    Hope this helps!
    Thanks,
    Karthik

  • MeetingPlace Express Assistance

    Hi All,
    We have MeetingPlace Express version 2.1.1.2.
    We need to configure it to accept any user to make a non-scheduled conference directly, without requesting the user to enter his profile ID and profile password, and without the need to add the data of the users into the MeetingPlace.
    We just need it to act as an audio conference bridge, so we need the user to dial the MeetingPlace number, then he can enter a certain password (one password for all our staff) to enable our employees to log into the MeetingPlace, and then get the Meeting ID and Meeting password and start the meeting.

    Sherif,
    You are going to want to export using all of the headers and leaving them intact in the import file.  You will want to follow the steps below for a successful import as the system is really sensitive that the data is formatted a certain way.
    Create a test user profile in MPE manually so that you can get the file format of the import file with the headers.
    Export User Profiles.
    Export this test user profile to a file and include the header information.
    This will create a User_Profiles.txt file that you will save and then open up in Excel. (Follow these steps below to ensure that the file is formatted correctly)
    1.  Within Excel, click on the Open tool on the toolbar. Excel displays the Open dialog box. (To display this dialog box in Excel 2007/2010, click the Office button and then click on Open.)
    2. Using the Files of Type drop-down list at the bottom of the dialog box, indicate that you want to open Text Files (*.prn; *.txt; *.csv).
    3. Select the saved export file.
    4. Click on Open. Excel starts the Text Import Wizard, displaying the Step 1 of 3 dialog box.
    5. Make sure the Delimited choice is selected, then click on Next. Excel displays the Step 2 of 3 dialog box.
    6. Select Comma as a delimiter, then click on Next. Excel displays the Step 3 of 3 dialog box.
    7. Click on Finish. Your file is imported.
    8. Once the file is opened up in Excel, import your users into this spreadsheet so that they conform to the necessary format and the required headers.Next, find the "isLocalUser" field and set the parameter value for al user profiles from "No' to 'Yes'.  Then find the EncryptedProfilePWD and EncryptedUserPWD fields.  Remove the 'Encrypted' portion of the field name in the header so that they now read ProfilePWD and UserPWD.  Make sure the value for the ProfilePWD for these user profiles is a standard alpha password. (cisco)  Then make sure the value for the UserPWD for these user profiles is a standard numeric password. (12345).  You may just be able to leave them as they are from your import.
    9. Save the file with the changes.
    10. Go to the Application MPE Web Page and then Maintenance-->Import Data-->Import User Profiles.
    11. Select 'Add Profiles To System', select file to import, and set Overwrite field to 'Yes".  (You should also set the log information to file option.)
    12. Hit 'Execute' to import the user profiles to the system.
    13. Once this is completed successfully, then go check the User Profile configuration to ensure that all users are imported correctly into MPE.
    If you run into any problems with this procedure, please open an SR with TAC so that we can assist further.
    Thank You,
    Gerry

  • MeetingPlace Express User ID Change

    I am running MeetingPlace Express 2.1.1.2 and it is AD/CCM Integrated. We in the process of changing our AD User login ID and I may have run into a problem. From Call Manager perspective I just perform a full sync and it is good when a change is made.
    However I cannot modify the user ID in Meeting Place Express.In reading the on line help, it says "Deleting a user profile also results in the removal of all meetings scheduled by that user from the end-user web interface; however, any meetings scheduled by that user still exist in the system"  Does that not contradict itself?
    When I add the user back with the same profile ID, will it re-associate the scheduled meetings? Also, is there a way to manually modify/sync the user id rather than deleting and re-adding?
    Thanks, in advance.
    Doug

    I still don't understand how and when you are encountering that obstacle, but nevertheless if you cannot surmount it you will have to solicit Apple's help.
    Apple can reset your iPhone if you present them its original, dated sales receipt. I believe you will have to do that in person at an Apple Store or an Apple Authorised Service Provider.

  • MeetingPlace Express callout feature not working

    Hello ,
    we have Cisco Unified MeetingPlace Express 2.1.1.2 .
    I am able to make audio/web confrence .
    But call out facility is not working .
    Please let me know what configuration need to be done for getting call out facility  on CUMP
    Below call out features are not working .
      1-Call -alram
      2-operator assistence while dialing 0
      3-dialing from webconf
      4- dialing   from phone view
    CUCM version 7.1
    Meeting place i have confifured as h.323 h/w in CUCM
    Thanks ,
    Shaijal

    Hello,
    After restarting CUMP server my problem got resolved .
    I gave below command to restart the system from the root .
    /sbin/shutdown/ -r now
    Thanks,
    Shaijal

  • MeetingPlace Express 2.1 Record Meeting issue

    Hi,
    I have a problem when I try to record a meeting. The error message is:
    "MeetingPlace Express failed to start recording, internal error."
    Any idea what's wrong?

    You can enable or disable an automatic backup.
    If the automatic backup is enabled, an L0 backup happens twice a week, every Monday and Thursday
    at 11:00PM, local server time. The L1 backup is run each day at 1:00AM,local server time, while the L2 backups are done daily at 4:00AM,
    8:00AM, 12:00PM, 4:00PM, and 8:00PM, local server time. The schedule is stored in the crontab file.

  • Cisco MeetingPlace Express Web Conferencing Stops Working

    My MeetingPlace Express Version is 1.1.2.1001,but not 1.1.1.The error message received when attempting to join a Cisco MeetingPlace Express web meeting room is shown below:
    Your Account Has Expired.
    You are getting this error message because:
    You were trying to login to your account and it has expired.
    You were trying to access a content, course or meeting and your
    account has expired.
    I thought it is not the MPE FN - 62447:
    http://www.cisco.com/en/US/products/ps6533/products_field_notice09186a00806b3379.shtml
    I have reinstalled the MPE,but the problem still appeared.I have modified the machine's nic mac and upload a different license,too.But the error information is still shown?Why?What shall I do?

    Hi,
    Here is the output of the df -h command. I beleave we have enough space.
    ade # df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/mapper/smosvg-rootvol
                          1.9G  316M  1.5G  18% /
    /dev/mapper/smosvg-tmpvol
                          1.9G   36M  1.8G   2% /tmp
    /dev/sda3             965M   18M  898M   2% /storedconfig
    /dev/mapper/smosvg-recvol
                           93M  5.6M   83M   7% /recovery
    /dev/mapper/smosvg-home
                           93M  5.6M   83M   7% /home
    /dev/mapper/smosvg-optvol
                          141G   62G   72G  47% /opt
    /dev/mapper/smosvg-usrvol
                          5.7G  1.2G  4.3G  22% /usr
    /dev/mapper/smosvg-varvol
                          1.9G  101M  1.7G   6% /var
    /dev/mapper/smosvg-storeddatavol
                          3.8G  146M  3.5G   4% /storeddata
    /dev/mapper/smosvg-altrootvol
                           93M  5.6M   83M   7% /altroot
    /dev/mapper/smosvg-localdiskvol
                           29G  6.9G   20G  26% /localdisk
    /dev/sda1              99M   13M   82M  14% /boot
    tmpfs                 3.9G  2.0G  1.9G  51% /dev/shm
    Thanks
    Jelena

  • Securing LDAP on Meetingplace Express

    Hello,
    I'm looking to harden the security of a MeetingPlace Express (V2.0.1.15).
    SSL has been implemented successfully resulting in https browsing only.
    The next step is to integrate with AD for user authentication over a secure link. The Bind requests currently are simple (i.e. clear text userid and password) which is not secure.
    Can anyone advise on how this can be configured to use SSL/TLS for the LDAP queries. This is a standalone MPX in that I do not have a Cisco Call Manager to secure the queries.
    Thanks.

    You will need to install the AD Plugin for CallManager before this.
    Complete these steps in order to integrate MeetingPlace Express with Active Directory (AD):
    - Log in to Cisco Unified MeetingPlace Express.
    - Choose Administration at the top of the page.
    - On the left side of the page:
    Choose System Configuration.
    Choose Usage Configuration.
    - Configure these fields:
    Cisco CallManager version-Set this field to Cisco Unified CallManager Release 4.x.
    LDAP URL-Set this field:
    Make sure that this URL starts with ldap, not http. For example, ldap://server-ip-address:port/
    Make sure that there are no spaces after the URL.
    Directory username-Use the format of an LDAP distinguished name, for example:
    Password-Use the password that was specified during the Cisco Unified CallManager installation.
    Cisco base
    User base
    Directory type
    - Click Save.

  • Installation problem on Intel

    I have tried to install Solaris 8 on my Dell machine.
    I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
    The first screen says this....
    SunOS Secondary Boot version 3.00
    WARNING: ACPI Tables not in Reclaim Memory
    prom_panic: kmem_free block already free
    Entering boot debugger:
    [130ee5]:
    and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
    I don't know what the ACPI tables are .. and how i can fix this...
    Anyone who knows this... please help..
    Thanx a lot..

    I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

  • Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

    Help!
    I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
    HpSdpAppCoreApp
    "The feature you are trying to use in on a network resource that is unavailable.
    Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
    The last time I dug through some files on my own, bad things happened.
    Thanks,
    C

    good gracious, Chris ...
    okay, try applying the general advice on installation problems given here:
    http://docs.info.apple.com/article.html?artnum=93976
    ... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
    http://consumer.installshield.com/faq.asp#ts
    keep us posted.
    love, b

Maybe you are looking for