MeetingPlace Express to Meeting Place

I have a customer who is on MPX. Since it is EOS, we need to upgrade to full blown meeting place. Is this something that can be done through the PUT, and if so what is the part number? I see this part number when I pull it up: CONF-MP-UWL-MIG. Is that it?
Also, I need clarification on the web portion. In MP 8.0, is web conferencing included or is that a seperate server?
Thanks in advance!

I'll take the wind out of your sales with the big thing first:
I need clarification on the web portion. In MP 8.0, is web conferencing
included or is that a seperate server?
This is WebEx MeetingCenter. The customer must sign a WebEx contract. MeetingPlace 8 only provides on-premise audio and video conferencing. In some deployments, the customer may choose to add an additional server called the WebEx Node for MCS that extends the WebEx cloud to the local site so they can use the cheaper "internal ports". Note that some customers may receive a limited quantity of WebEx ports for the remainder of their UCSS contract. Work with your Cisco AM to get this straightened out.
I see this part number when I pull it up: CONF-MP-UWL-MIG
This is for CUWL customers. You will want to read the ordering guide for this, and likely seek the assistance of your Cisco AM or channel resources. There is a lot of confusion on this topic so do not be surprised if they need to ask others for assistance.
Ordering Guides: http://www.cisco.com/web/partners/sell/technology/ipc/uc_tech_readiness.html#~7
Lastly, do not go into a MeetingPlace deployment unprepared. It is significantly more involved than MPE was. There are two classes on PEC that I would go through at an absolute minimum. The word from the BU is "make sure you fully understand MP7 before attempting to deploy MP8."
Designing Cisco Unified MeetingPlace Solutions (DMPS)
Implementing Cisco Unified MeetingPlace Solutions (IMPS)
Lastly, there are a few WebEx recordings on this topic and the MP8 deployment strategies. I don't have the links handy but your channel SE should be able to find them for you.

Similar Messages

Meetingplace Express

Has anyone published a meetingplace express web meeting through ISA server before? What is the best way to publish the web meeting portion for external access?

So to change this a little...ISA Server is gone. I need to allow web access to Meeting Place Express web rooms via Cisco 2821 router working as firewall. Any ideas?

Meeting Place

1.my understanding is that if you want to have a videoconference of 3 or more parties, you need an MCU, such as a 3515.
2.Can you not just use meeting place express or meeting place express VT ? as opposed to having to use an high value piece of hardware such as MCU.
3. or is it that an MCU has meeting place built in so you wouldn't need an mcs server with meeting place express installed.
In short I want to do videoconferences with 10 participants but at an effective cost. I do not need to do over ISDN. but will need to do over 2 mpls sites.
can anyone recommend a good cisco solution?

Any advice would be much appreciated

Cisco MeetingPlace Express Web Conferencing Stops Working

My MeetingPlace Express Version is 1.1.2.1001,but not 1.1.1.The error message received when attempting to join a Cisco MeetingPlace Express web meeting room is shown below:
Your Account Has Expired.
You are getting this error message because:
You were trying to login to your account and it has expired.
You were trying to access a content, course or meeting and your
account has expired.
I thought it is not the MPE FN - 62447:
http://www.cisco.com/en/US/products/ps6533/products_field_notice09186a00806b3379.shtml
I have reinstalled the MPE,but the problem still appeared.I have modified the machine's nic mac and upload a different license,too.But the error information is still shown?Why?What shall I do?

Hi,
Here is the output of the df -h command. I beleave we have enough space.
ade # df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/mapper/smosvg-rootvol
                      1.9G 316M 1.5G 18% /
/dev/mapper/smosvg-tmpvol
                      1.9G   36M 1.8G   2% /tmp
/dev/sda3             965M   18M 898M   2% /storedconfig
/dev/mapper/smosvg-recvol
                       93M 5.6M   83M   7% /recovery
/dev/mapper/smosvg-home
                       93M 5.6M   83M   7% /home
/dev/mapper/smosvg-optvol
                      141G   62G   72G 47% /opt
/dev/mapper/smosvg-usrvol
                      5.7G 1.2G 4.3G 22% /usr
/dev/mapper/smosvg-varvol
                      1.9G 101M 1.7G   6% /var
/dev/mapper/smosvg-storeddatavol
                      3.8G 146M 3.5G   4% /storeddata
/dev/mapper/smosvg-altrootvol
                       93M 5.6M   83M   7% /altroot
/dev/mapper/smosvg-localdiskvol
                       29G 6.9G   20G 26% /localdisk
/dev/sda1              99M   13M   82M 14% /boot
tmpfs                 3.9G 2.0G 1.9G 51% /dev/shm
Thanks
Jelena

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Cisco Meeting Place Express 2.1.1.2 and not working anymore

Hello, we currently have cisco meeting place express 2.1.1.2; however are now having issues with it. We are unable to dial to the internal extension that was previously working to login to the meetings and only get a busy signal everytime. Furthermore, whenever someone tries to schedule a new meeting via the web form, it says "request to server timed out. please try again".
I tried reaching out to Cisco TAC support; however it's no longer a supported item and am looking for assistance here. The TAC engineer was able to help assist with updating the system clock; however I believe the problems started happening after we updated the clock and rebooted the server. Now we are unable to schedule and attend any meetings (busy signal everytime) at all. I tried restarting the server itself as well as via the command line. I also now see an error during CLI restart, which I have listed directly below:
Stopping MeetingPlace SNMP/R:                              [ OK ]
Stopping mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Stopping mpe-tomcat-securewebservices: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Shutting down breeze:                                      [ OK ]
Shutting down fmsmaster:                                   [ OK ]
Shutting down fmsadmin:                                    [ OK ]
Stopping MeetingPlace application: /etc/init.d/mpx_app: line 264: 4955 Segmentation fault      (core dumped) ${shutdown_bin} ${shutdown_arg_1} ${shutdown_arg_2} ${shutdown_arg_3} >>${non_verbose_shutdown_output} 2>&1
                                                           [FAILED]
    ERROR: returncode = 139
Stopping MeetingPlace License Manager:                     [ OK ]
Stopping MeetingPlace database:                            [ OK ]
Stopping MeetingPlace Java RMI: Shutting down RMI Registry:
                                                           [ OK ]
Stopping Cisco MeetingPlace Express:                       [ OK ]
Starting MeetingPlace Java RMI: Starting RMI Registry:
starting daemon
mpxadmin
                                                           [ OK ]
Starting MeetingPlace database:                            [ OK ]
Starting MeetingPlace License Manager:                     [ OK ]
Starting MeetingPlace application:                         [ OK ]
    already running
Starting breeze:                                           [ OK ]
Starting fmsmaster:                                        [ OK ]
Starting fmsadmin:                                         [ OK ]
Starting mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Both the admin and user web interfaces work on the home pages, but can't seem to schedule any new meetings or login to any existing ones, with busy signal as well. Anyone have any ideas? We need assistance with this ASAP since it's our voice collaboration solution. Thanks in advance for any help.

Amlesh,
Here is the pertinent output:
/common/log/taos-log-a/core/core.1947.11.ConfSchd.1183266069
/common/log/taos-log-a/core/core.1837.6.gyromain.bin.1183266161
/common/log/taos-log-a/core/core.1859.6.cpgs.1183266206
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1184475669
/common/log/taos-log-a/core/core.1946.11.ConfSchd.1185685269
/common/log/taos-log-a/core/core.1836.6.gyromain.bin.1185685332
/common/log/taos-log-a/core/core.1880.6.cca.1185685452
/common/log/taos-log-a/core/core.1858.6.cpgs.1185685452
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185771671
/common/log/taos-log-a/core/core.1863.6.cpgs.1185771865
/common/log/taos-log-a/core/core.1884.6.cca.1185771865
/common/log/taos-log-a/core/core.1991.6.nmpagent.1185771865
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185858067
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1188018079
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1188190869
/common/log/taos-log-a/core/core.2008.6.vui.1188190988
/common/log/taos-log-a/core/core.2029.6.nmpagent.1188190988
/common/log/taos-log-a/core/core.1998.6.poclient.1188190988
/common/log/taos-log-a/core/core.1970.11.ConfSchd.1189227671
/common/log/taos-log-a/core/core.1862.6.gyromain.bin.1189227762
/common/log/taos-log-a/core/core.1883.6.cpgs.1189227807
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1189918866
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190005281
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190178068
/common/log/taos-log-a/core/core.1886.6.cca.1190178237
/common/log/taos-log-a/core/core.2012.6.nmpagent.1190178237
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1191906070
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1191906162
/common/log/taos-log-a/core/core.1886.6.cca.1191906248
/common/log/taos-log-a/core/core.1865.6.cpgs.1191906248
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1192424479
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1192424571
/common/log/taos-log-a/core/core.1863.6.cpgs.1192424613
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1192597270
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1192683669
/common/log/taos-log-a/core/core.1903.6.cca.1192683817
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1193029270
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1193029360
/common/log/taos-log-a/core/core.1864.6.cpgs.1193029400
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1193720467
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1193720565
/common/log/taos-log-a/core/core.1864.6.cpgs.1193720610
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1195452071
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1195452170
/common/log/taos-log-a/core/core.1864.6.cpgs.1195452213
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1196834481
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1197007273
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1197007371
/common/log/taos-log-a/core/core.1864.6.cpgs.1197007413
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1198044080
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1198044184
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1199858530
My understanding is these core files are crash dumps and are safe to delete?
Jared

Cisco Meeting Place Express 2.0 Exchange Server Configuration error.

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system.
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная таблица";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
I have a problem with Cisco Meeting Place Express and Exchange Server synchronizing.
The Cisco Meeting Place Settings are
Exchange Server
Hostname *
Language* de_DE en_AU en_GB en_US fr_CA fr_FR
SSL   enabled * true false
Cisco Unified MeetingPlace Express   Mailbox Account
Windows   domain *
Username *
Password *
Password   confirm *
E-mail   address *
Mailbox   maintenance interval (days) *
Mailbox   maintenance cutover (days) *
When I type the button test, I receive “Authentication error. Check the authenticated access to the Exchange Server for Microsoft NTLM authentication scheme.”
My Exchange Server is synchronized with MS Active Directory. As far as I know, Kerberous is used for authentication. So, how can I enable NTLM authentication scheme on AD? Are there any other options for Cisco MPE and Exchange synchronization?
Thanks for help
Sincerely yours
Sergey Bondarenko

st1\:*{behavior:url(#ieooui) }
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная таблица";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Thanks a lot.
I have corrected domain name in configuration after your advice. Cisco MPE Exchange Configuration is working very well now. I’m able to start a meeting from the outlook calendar and send messages to meeting participants.
Thank you very march for your assistance!
Sincerely yours
Sergey Bondarenko

Meeting Place Express 2.1.1.2 Web Access Issue

Hello all,
I'am having an issue with a Meeting Place Express 2.1.1.2 server. There was a power failure and now we can still access the server via dial-in but the web acess is not working. From the CLI i run the mpx_sys status command and it says webservices is active. The server has been restarted. When I check the errorlog I see "unable to connect to webservices, trying again" Anyone know what the issue might be? Thanks
Jason

Hello Hasnain,
Have you tried the recovery procedures below:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express%2C_Release_2.x_--_Troubleshooting_System_Issues#Recovering_the_Password_for_the_root_Account
If that doesnt work, you will need to open a TAC case and TAC will send you a password recovery .iso file to burn on a CD/DVD.
Regards,
Victor Dang.

Meetingplace express 1.2 vocie-only meeting schedule

We have just installed meetingplace express 1.2. I cannot find where in the web interface you schedule a voice only meeting. If we schedule a meeting for more participants then web-colaberation licenses it asks if we want to switch to voice only- never to schedule voice only form the start. How can we do vocie only from the start?

Hi Andy,
I looked into this once before and never came up with an answer :) but it looks like Ginger came up with an excellent one! Have a look at this thread;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dddf711/0#selected_message
Hope this helps!
Rob

MeetingPlace Express 2.1 Record Meeting issue

Hi,
I have a problem when I try to record a meeting. The error message is:
"MeetingPlace Express failed to start recording, internal error."
Any idea what's wrong?

You can enable or disable an automatic backup.
If the automatic backup is enabled, an L0 backup happens twice a week, every Monday and Thursday
at 11:00PM, local server time. The L1 backup is run each day at 1:00AM,local server time, while the L2 backups are done daily at 4:00AM,
8:00AM, 12:00PM, 4:00PM, and 8:00PM, local server time. The schedule is stored in the crontab file.

Can MeetingPlace Express make conference calls with just meeting ID and meeting password?

Hi,
We have MeetingPlace Express version 2.1.1.2. It is working fine and everything but we need to change the way it works.
For audio only conference calls, we need the users to be able to initiate meetings without having to enter their profile ID and profile password.
For example when a caller dials the MPE number and presses 1 to start a meeting, he has to enter his PIN code to be authorized to start a meeting, we want to exclude this feature, so that any one who dials the number and wants to start a meeting, he will get a meeting ID and meeting password directly.
Is this possible in MPE 2 ? Appreciate your help please, thanks in advance.

I poked around a system I have nearby and can't find a setting that is an obvious choice for this one. I experience the same behavior at the 30 minute mark.
One alternate approach you may try is called a continuous meeting. The viability of this approach depends on how this is being used:
This likely will NOT work if you have lazy users who can't manage their time.
The reason is a continuous meeting always consumes the licenses for itself, even if there are not participants currently in it.
This may work if you have defined groups of users who repeatedly meet as a group in an ongoing manner.
A continuous meeting is a scheduled meeting that reserves ports and a meeting ID indefinitely, so that
participants may join the meeting at any time on any day. Nevertheless, a continuous meeting is in
session only when at least one participant is in the meeting.
I searched high-and-low for documentation on this and the only two items that I can turn up are these:
http://www.ciscosystems.org/en/US/docs/voice_ip_comm/meetingplace_express/1_1/english/administration/guide/bagmtgs.pdf (page five)
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express,_Release_2.x_--_How_to_Configure_Scheduled_and_Reservationless_Meetings#Enabling_Users_to_Schedule_Continuous_Meetings
One downer though: I cannot get the Continuous option to appear on my MPE 2.1.1.2 hotfix 36 (last release) system. Either I'm missing an option myself or something is wrong in this version.

Meeting place express and Windows 7 compatibility

I wonder if someone already tried to use Meeting place Express 2.0 with clients that are using Windows 7 OS? If so I wonder if there are some compatibility issues?
Regards

At least with the 2.1.1.2 hotfix 36 version (last and highly recommended patch) of the product the Outlook plugin appears to work with Windows 7 32bit and Office 2007. It's getting increasingly touchy as Microsoft patches things and totally bombs in Office 2010 if you have the 64bit version.
The Adobe Breeze interface seems to function without issue, even in the 64bit OS.

Meeting place express email notification not working

Hi,
Facing issue with meeting place express email notification.
The SMTP e-mail exchanger rejected a recipient's e-mail address as unknown.
is the error message i get.
Ping status is fine, on firewall ports are opened as any any.
As per the exchange administrator, there is no request coming to the exchange from meeting place.
Any help is appreciated.
Thanks,
Vinay

I assume this is an existing system that has been working as MPE has not been sold in a long time. Was this working in the pass and just stopped working? When are you seeing this error and does it happen for all users?
Has the logon changed that MP uses to access the SMTP server? If the password changed on the SMTP server and was not updated on MP this will happen.
John

Cisco Meeting Place Express

Hello All,
I am trying to do the Meeting Place Express 8.0 Integration with interal WEBEX node for MCS "Type 2 Integration". My confusions are
1- Can we install Internal webex node on MCS without integrating with Cisco Webex Cloud?
Internal node will be used for scheduling the in house meeting. This configuration i am doing to acheive the LAB demo system.
My understanding is :- Internal WebEx node cannot be installed as a standalone without Webex Cloud Node.
Pls educate me how to proceed
If possible, Pls help me to get the document to acheive this configuration.

Hello All,
I am trying to do the Meeting Place Express 8.0 Integration with interal WEBEX node for MCS "Type 2 Integration". My confusions are
1- Can we install Internal webex node on MCS without integrating with Cisco Webex Cloud?
Internal node will be used for scheduling the in house meeting. This configuration i am doing to acheive the LAB demo system.
My understanding is :- Internal WebEx node cannot be installed as a standalone without Webex Cloud Node.
Pls educate me how to proceed
If possible, Pls help me to get the document to acheive this configuration.

Problem with Cisco Unified Meeting Place Express

the user is unable to get connected to the Meeting Bridge set up in the Cisco Unified Meeting Place Express on the scheduled time.

Hit up [email protected] and ask. They'll either say 'no' or give you hand; either way that's your answer.

MeetingPlace Express to Meeting Place

Similar Messages

Maybe you are looking for