Meetingplace Outlook Plugin Question

I have a meetingplace express server that is in sync with LDAP. I have a user that had a username that was different than his email address. For some reason when he attempts to schedule a meeting using the outlook plugin for meetingplace, he gets the error "The person you schedule on behalf of doesn't have a profile". I need to know what the plugin or meetingplace looks at when a meeting generation is attempted. The user definitely has a profile but I believe since his profile name and email address were different, that is causing some problems. Any ideas here?

The MR1 release fixed the issue. It was actually released with this fix in mind. It allows meetingplace to work with a user even if the username and alias don't match up, without MR1 if the alias is different from the username, in our case it was, MP says that the two aren't the same user. In MR1 it is smart enough to see that it is the same user.
CUMP_AppServerUpgrade_8_5_3_4.bin
They also just released the MR2 which focuses on a lot of the outlook plugin errors.
CUMP_AppServerUpgrade_8_5_4_12.bin

Similar Messages

Support of MeetingPlace Outlook Plugin with Office 2010/OS 64bits

Hi community,
Does it the MP8.5 outlook plugin will be supported the following configuration, Office 2010 and OS 64bits on workstation?
Currently, i have a customer which deploy this config and would like to know if the plugin of MP8.5 will be support.
Thanks
regards

dpelinka wrote:
Is there a version of Outlook Connector with support for Office 2010?No.
Are there plans to offer one?I'm checking on this. I suggest you also try official channels (i.e. log a Sun support request) so a Request-for-Enhancement can be created if required.
Regards,
Shane.

Meetingplace Express outlook plugins fail with 0x80070003 code error

Basicaly the problem it described on de title. when I try to install the outlook plugin appear code error 0x80070003. it say that: "Setup encountered an error during copying the form file 0x80070003"
Im working with 2.0.3.35 meetingplace version.
Regads

This issue has been fixed in MeetingPlace Outlook 4.1.3.61 and 4.2.5.21 hot fix (FA00183). download the hot fix from CSRC.
Installation Instructions:
1. Replace the existing setup.exe and upgrade.exe in the \latitude\mpweb\mpoutlook folder.
2. Run ConfigClients.exe. Save and close.
3. Have end-users install by running the setup.exe program.

Ms Dynamics 2011 Outlook plugin "crm disconnected" problem

Hello ,
In my company , we use Ms. Dynamics software.
My problem is about outlook plugin. I can install outlook plugin successfully. But when i try to click any button on plugin , an error appears. It says "crm disconnected". I try to reinstall the plugin. But problem wasnt solved. I can use crm from
ie , everthing works fine. But from outlook plugin , i couldnt use any button. I hope somebody know how solve this problem.
Thank you in advance.
Best Regards
Caner SANKO

Hi,
The error seems to be security related. Check Append and Append To permission for Activity.
Hope this helps.
Minal Dahiya
blog : http://minaldahiya.blogspot.com.au/
If this post answers your question, please click "Mark As Answer" on the post and "Vote as Helpful"

Outlook 2007 Conduits / Barracuda Outlook Plugin - Trouble Report and Workaround

This is a trouble report and workaround.
My employer uses a Barracuda spam firewall. They encourage users, who have Outlook 2007, to install the Outlook plugin. The plugin makes a couple of icons on the Outlook toolbar that are useful for improving the spam filtering capability of Outlook.
Unfortunately, shortly after I installed the Barracuda plugin, Hotsync with my Palm Centro stopped working right.
There is a conflict between Palm's Outlook 2007 Conduits and the Barracuda plugin for Outlook. This prevents the Calendar from synching my Centro. (The other Outlook components I have synched, Memos and Contacts, might still synch).
As a workaround, I disabled the Barracuda plugin, and Hotsync worked correctly.
It is possible to leave the Barracuda plugin enabled most of the time, but disable the plugin right before you Hotsync, then re-enable. It's not too onerous, because most users only synch their Palms once or twice a day.
It's not idea, but this is the best workaround I have found for Palm users who have Outlook 2007 and would like to use the Barracuda plugin.
Post relates to: Centro (AT&T)

- Switching Computers
only 3 are experiencing problems
Hi TieT,
Do you mean the Oulook will be crashed if all users log on to these 3 problematic clients to configurate their own Windows profiles and Outlook profiles? However, if uses log on to another client, it works?
Seems like this is an Outlook client issue, if possible, please reinstall OS for one client computer to test.
By the way, you can also seek the solution in the Outlook forum:
http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Frank Wang
TechNet Community Support

VSTO development outlook plugin how to get the full storage path attachment send mail attachments added

Such as the title, but I have a filepath verified discoveries are empty, there is a member of the method will be invoked after GetTemporaryFilePath COM error, but also can not get in VSTO attach the member variable. Accessories are found himself in a temporary
directory exists, the registry seems to have a place to record the address of this directory, but this is his findings do not know can not be used as a method to obtain

Hello,
First of all, the forum is for Office Apps. That's why I'd recommend asking VSTO specific questions on the
Visual Studio Tools for Office (VSTO) forum instead. For Outlook dev questions see the Outlook for Developers forum .
> there is a member of the method will be invoked after GetTemporaryFilePath COM error, but also can not get in VSTO attach the member variable.
What exception do you get in the code? Could you please be more specific?
The GetTemporaryFilePath method is only valid for those attachments whose Type property
is OlAttachmentType.olByValue. That means that the attachment is a copy and that the copy can be accessed even if the original file is removed. For other attachment types, the GetTemporaryFilePath method
returns an error.
GetTemporaryFilePath also returns an error when accessing an Attachment object
in an Attachments collection
or in the AttachmentSelection object.
UseGetTemporaryFilePath only in attachment event callbacks listed below for various Microsoft Outlook items:
AttachmentAdd
AttachmentRead
AttachmentRemove
BeforeAttachmentAdd
BeforeAttachmentPreview
BeforeAttachmentRead
BeforeAttachmentSave
BeforeAttachmentWriteToTempFile
Where do you use the
GetTemporaryFilePath method of the Attachment class? What code do you use?

Outlook plugin issues

We are having major issues with the outlook plugin... OutlookDesktopFlag_6.5.0_003.msi
All issues are reported by Office 2003 users.
We use a CRM program called Touche, which is re-branded SolvIt from Prosper Business Solutions (sold as Touche by Harland Financial Systems). This program pulls data from outlook into it's screen and I think that's where the issue is.
On many of these PC's when they sign into Touche, they get a Runtime error 216 at 65404AEC. They click OK and then a Microsoft Outlook dialog box comes up saying that there was an issue loading the IronPort postx add-in and try detect & repair in the help menu.
1. Detect & Repair in the help menu takes a long time and does not fix the issue.
2. Re-running OutlookDesktopFlag_6.5.0_003.msi and selecting repair does not fix the issue.
3. Going into Outlook options and disabling the plugin DOES fix the issue.
Note, opening outlook by itself does not always invoke the issue.
Anyone have experience with the Outlook Desktop flag?
I also uninstalled it from a machine and the "Send Secure" button still exists in his compose e-mail screen, although pushing it does not do anything.
I appreciate the input. Thanks!

Hello Sauerk,
I think you best open a support case with Ironport and the supplier of your CRM. This looks like the two Outlook add-ons are biting each others ass.
Since you have to deal with two independent sofware vendors that have written extra software for a MS product (Outlook) I think this can cause you a hard time getting a solution.
Good Luck,
Steven

Skype outlook plugin for chrome in usa when?

Any definitve deadlines/answers on exactly when this "SUmmer roll-out" (Summer is here Micrsoft!) of Skype Outlook plugin for Chrome will really truly happen in the USA? Why is it taking so long for one of the biggest most cash rich companoies on the planet to keep their projections and promises and satisfy their SKYPE serious user clients???!#$%^ Any CLUE? Why so difficult for the mighty MS?
Where does one download the Plug-in at/from when it is avail?
THX...lets go MS...take care of your USA SKYPERS>>.you bought it now please fix it!

I agree. It makes no sense whatsoever to release iCal with no Outlook connector unless you never intended to do that or you want everyone to work out the bugs before a "real" release. I have an organization that I would love to move off of Exchange, but can't because they love Outlook. I can't even get an answer from anyone as to what to use besides Outlook, if I could get them on Neooffice or something else.

Dynamics CRM 2013 : Offline capability with Outlook Plugin

Dear all,
I have a scenario where I have to use the Offline Capability feature of Dynamics CRM 2013 with CRM Client for Outlook plugins.
Can I use the offline capability mode if all my users are using gmail as their email?
If so, can someone guide me please.
Your help would be greatly appreciated.
Many Thanks & regards
Vinay

You need to change page size in order to see the on button. try Ctrl+0
Regards Faisal
Thanks Faisal for your reply. I tried Ctrl+0 (zero) but no difference. I think Ctrl+0 is for clearing the zoom in/out effect in web pages. While this tool is a windows (desktop) application.
Please note that I have taken the snap (attached in original post) after maximizing the
Update Assembly dialog (by double clicking the title bar area.
The version of the Plugin Registration Tool is 6.1.1.1143 64bit. If you can check your Plugin Registration Tool version and post the snapshot as well?
blog: http://technologynotesforyou.wordpress.com | skype: ali.net.pk

CRM 2011 Outlook plugin corrupts emails

Hi, we have CRM 2011 server with rollup 14 installed, using CRM 2011 for Outlook plugin. One client PC's Outlook client is corrupting many emails when set to track in CRM.
I have removed CRM, removed all registry entries pertaining to CRM, repaired Office 2013, reinstalled CRM 2011, applied rollup 14, and this still happens. Every PC I configure with the account and open the email, it crashes Outlook. I have run scanPST on
the OST, run the repair requests in Exchange server 2010. I have deleted the forms cache.
When an email gets corrupted, when opened in Outlook it says "Could not install the custom actions" and then Outlook 2013 crashes. It does this in Outlook 2010 also. In OWA, it says:
"The item can't be opened because it's become corrupted. The entire error report is listed below"
Request
Url: https://mail.domain.com:443/owa/forms/premium/SubPageEventHandler.aspx?ae=Item&a=Preview&t=IPM.Note&id=RgAAAAAuqXPz0wsjR7oZyndzAS3zBwDD7li80LE7TJZxUTnw%2f23uABHjr5k6AACQoheAQ7%2fBSI2QCj7WrlR2AAA7MLI6AAAJ&calist=16160016&canary=VJfXrHC4sk6pcFV4ES1rUkrzVHB_ndAIAXf5zZ4jHl1ZmP6AAfpamQ6POFzh_KiCfUKhXuaTFiY.&SP=1&pfmk=M40%3a1381870228548%3bM6%3a1381870228584%3bM33%3a1381870230010%3bM46%3a1381870230029&subpage=ReadMessage.ascx
User: UserA
EX Address: /o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=UserA
SMTP Address: [email protected]
OWA version: 14.3.158.1
Mailbox server: exchange.domain.local
Exception
Exception type: Microsoft.Exchange.Data.Storage.CorruptDataException
Exception message: The voting data was corrupt.
Call stack
Microsoft.Exchange.Data.Storage.VotingInfo.Read(BinaryReader reader)
Microsoft.Exchange.Data.Storage.VotingInfo..ctor(MessageItem messageItem)
Microsoft.Exchange.Data.Storage.MessageItem.get_VotingInfo()
Microsoft.Exchange.Clients.Owa.Premium.RenderingUtilities.RenderVotingInfobarMessages(MessageItem message, Infobar infobar, UserContext userContext)
Microsoft.Exchange.Clients.Owa.Premium.ReadMessage.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

There's nothing in the error report to hint that the problem is related to CRM. The error report contains references to voting data. Does the problem email have voting buttons enabled on it? In Outlook 2013, when you create a new email message there is
a Options tab with a feature called Use Voting Buttons. Perhaps this feature has a problem on its own, or when voting emails are tracked in CRM?
Neil Benson, CRM Addict and MVP at Slalom Consulting.
Find me on Twitter. Join over 20,000 other CRM professionals on the
Microsoft Dynamics CRM group on LinkedIn.

Ironport Outlook Plugin Reply Encrypted Email

I would like to clarify whether Ironport Outlook plugins can (with flag mode) reply a "reply-message" originated from external CRES user.
Here is a situation:-
1. Corp User A compose an encrypted email to external user B
2. External user B receive this encrypted message and external user B open the HTML file with his/her CRES credentail
3. External user B reply same message via CRES cloud service
4. Corp User A receive the "reply-message" originated from external user B in outlook program
Please advise whether Corp User A can reply this "reply-message" or not with flap mode.

Ok thank you. Wasn't sure because prior to the plugin we just used words or tags in the subject, which obviously did not require a password to send an encrypted e-mail. Therefore we were confused because we thought a password was required only to read an encrypted e-mail, not send one.

Silient Uninstall Cisco Ironport Outlook Plugin

Basically need to uninstall 7-2-7.3 versions of the outlook plugin silently on hundreds of machines.
Basically the opposite of:
Cisco Ironport Email Security Plug-in.exe /exenoui /qu UseCustomConfig=\\server\shared\config\
I have tried different variations with no luck.

I found my answer. Pretty simple, could have been easier.
msiexec /x {GUID} /q
the GUID or Product ID, I was able to find using SCCM. Each version of the plugin is a different GUID. I used a script to se the right uninstalled line fore which version is installed.

Outlook Plugin - Doesn't list files

I installed the Outlook plugin, and although I am able to
sign in OK, if I choose "Insert Link from Acrobat.com", it just
sits at Populating List... and never gets the files from
Acrobat.com. Sending a mail over the threshold I've set (5Mb)
doesn't seem to go through Acrobat.com. I'm using the latest
version Beta 1.0.34 & am not behind a proxy.

Hello,
I'm sorry you're having trouble. My best suggestion would be
to try uninstalling the Outlook plugin and then reinstalling it. If
possible, you might also want to try it using a different internet
connection. If you continue to have the same trouble, please
respond to let us know.
Kind Regards,
Michelle

Outlook Plugin for Calendar Server

Has any recent progress been made on this..?
Or perhaps there is a "payable" plugin alternative that I've missed out on..?
Now that Apple has the Exchange / iPhone coding almost wrapped up, perhaps they will be offering their loyal OS X Server Admins an Outlook Plugin, or is that wishful thinking..?
To be honest, the fact they haven't offered it indicates their "seriousness" level in moving forward in the Enterprise market with 10.5.x
All I want(ed) was a working Calendaring solution, which doesn't involve converting an entire business to Macs, ... ensuring everyone you invite "lives" in your Company, ... and that no one needs to wirelessly sync their iPhone iCal over the air!
When are we going to get a WORKING solution Apple..????? Really, ... when????
Cheers,
Steve

I agree. It makes no sense whatsoever to release iCal with no Outlook connector unless you never intended to do that or you want everyone to work out the bugs before a "real" release. I have an organization that I would love to move off of Exchange, but can't because they love Outlook. I can't even get an answer from anyone as to what to use besides Outlook, if I could get them on Neooffice or something else.

Outlook plugin deployment

Hello!
We are now deploying outlook plugin, so the problem: it is unacceptable to instruct our users to install plugin manually, and we have to create an .msi for active directory.
What is your practice? Maybe IronPort have plans to release their own .msi packages, it will solve a lot of headache for system administrators all over the world!

Hello,
There is currently a feature request to make the Outlook plugin in .msi format. The feature request number is #1028. You may want to bring this up with your Sales or System Engineer and mention the benefit that this feature can provide.
Hope this helps. Let us know if you need any further assistance.
Hello!
We are now deploying outlook plugin, so the problem: it is unacceptable to instruct our users to install plugin manually, and we have to create an .msi for active directory.
What is your practice? Maybe IronPort have plans to release their own .msi packages, it will solve a lot of headache for system administrators all over the world!

Meetingplace Outlook Plugin Question

Similar Messages

Maybe you are looking for