MeetingPlace support for Outlook 2010

We have a client running CUCM version 7.1.3.30000-1 and using Cisco MeetingPlace version 2.1.1.2.
When my client migrated their users to Office 2010, they have been unable to use Meeting place, they get the following error:
"unable to download, unspecified error web browser"
As I have read this MeetingPlace version does not have support for Outlook2010 plugins, and we would have to upgrade to MeetingPlace 7.1 in order to solve this problem
With this environment:
a) Does MeetingPlace 7.1 support Outlook2010 plugins??
b) Can we upgrade this meeting place version to a new one supporting Outlook2010 plugins??? Or We also would have to upgrade CUCM version??
Thank you
Enrique Villasana

Enrique,
1. Yes, MP 7.1 supports MS Outlook 2010. Please refer http://www.cisco.com/en/US/partner/docs/voice_ip_comm/meetingplace/7_1/english/release_notes/mp71rn.html#wp127737
2. If MP needs to be upgraded to 7.1 then CUCM needs to be at 7.1.5 ( in 7.x series ). Please refer http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace,_Release_7.1_--_Component_Compatibility_Matrix
Hope it helps ?
GP.
Pls rate helpful posts by clicking on stars below the post !!

Similar Messages

Yahoo IMAP Settings for Outlook 2010 on Windows 7

Hi Guys,
I have been trying to get IMAP for Yahoo for Outlook 2010 on Windows 7 to work for a while now. I was just wondering if someone out there has gotten it to work.
Settings are Manually Configured.
Settings:
Account Type: IMAP
Incoming mail server: imap.mail.yahoo.com
Outgoing mail server: smtp.mail.yahoo.com
"Save My Password" Checkbox: Checked
Internet E-mail Settings #1:
Incoming server (IMAP): 143
Encryption Level: none
Outgoing server (SMTP): 465
Encryption Level: SSL
Server Timeout: 1 minute
Result: Continuous prompt for Username and Password when testing account settings until it fails to connect. However SMTP test email is sent.
So the only issue seems to be incoming.
Internet E-mail Settings #2:
Incoming server (IMAP): 993
Encryption Level: SSL
Outgoing server (IMAP): 465
Encryption Level: SSL
Server Timeout: 1 minute
Result: Error result is as follows "Log onto incoming mail server (IMAP): a secure connection to the server cannot be established." However SMTP test email is sent. So the only issue seems to be incoming.
I tried IMAP with gmail on 2 computers with the same environment (1 x 64bit and 1 x 32bit Windows 7 w Outlook 2010) and it seems to be fine so I dont believe it is any router/firewall issues. I have a Windows Mobile phone and it is working also. Of course most of the settings on the phone are configured automatically. If anyone could provide any suggestions, that would be great. Thanks in advance.

Hi
Thanks for sharing information. I was using same setting for Incoming but Outgoing has different settings.
I use outlook 2010 with a paid account and these settings work perfectly.
My Outgoing mail setting (While getting issue)
smtp.mail.yahoo.com
SSL: True
Port: 465
When i have above setting in my Outgoing mail i was getting error
Failed to update headers
account [email protected]
Protocol: IMAP
Server : 192.168.253.4
Port : 143
After changing from above setting to below mentioned setting i didn't get any issue while sending & receiving mail or changing folder.
Outgoing
smtp.mail.yahoo.com
SSL: False]
Port: 587
Outgoing server requires authentication:Checked
So thank you for sharing connection information.

Support for Excel 2010?

At what point does Oracle plan to add support for Excel 2010 (including 64 bit) to IOP?
11.1.2.0 supports Excel 2003 SP1 and Excel 2007.
Thank you.

It will be supported in future release and we dont have specific dates or releases yet.

CUCILync for Outlook 2010 64-bit

Hello,
Is there any possibility or work-arround to integrate the Cisco UC Integration for Microsoft Lync plugin (Release 8.5(1)) with Microsoft Outlook 2010 64-bit?
According to the release notes, the "click-to-call" feature it is not supported in Outlook 64bit but my company realy likes this tool and we want to deploy as soon as possible on all our laptops (Windows 7 with MS Office 2010, both in 64bit version).
Does anybody know if a new version the Cucimoc/Cucilync plugin will be released soon, which then will support Outlook 64bit?
Thanks a lot in advance.
Marc Hoffmann

Unfortunately, Office 2010 64-bit support did not make it into CUCILync 8.5.2 which is due for immenint release. It would be beneficial to express, to your Cisco Sales Team, your interest in having Office 2010 64-bit support for future CUCILync release (post 8.5.2).

Archiving options for Outlook 2010/2013 Home and Business?

Hi all,
Forgive me if this is covered already (I am sure it would be somewhere but I could not find a definitive answer). We are looking at migrating from Google Apps to Exchange and I am trying to cost it all up and have a question in relation to archiving.
Our 450 users are not akin to archiving, given their gmail limits, they are just used to keeping everything, however with exchange that will have to change as we are going to host it locally.
The question I have is what archiving options are available to me given that all our office installations are Home and Business 2010/2013? I have read the compatibility matrix which says outlook in this product does not support in-place archiving.
To test this I created an in-place archive for my account (outlook 2010 H&B) and when I re-open outlook I get my archive mailbox showing up.
I have not yet tested the mailbox retention policies and such like but I thought I would just ask as to what options would be available to me given this situation?
Given that my archive is now showing in outlook, what has caused that to happen? I would have thought that if it was not supported that it would not have shown up at all? Can someone explain what functionality will not work and what will?
If we have to buy new copies of outlook for all our clients it just adds to the cost that I suspect will kill the move and management will say that we can stay on gmail.
Thanks for any direction you may have.

I understand that it is not supported, I was just commenting that It appeared to work in the tests that I had done and I was curious as to why
Aaron would you mind to share your findings on this if any! We are in the same situation as you were.
I have activated Online Archiving (on-premises) feature for 3 accounts on our Exchange 2010 and set them up with Retention Policy which Move to archive items aged more than 6 months and all works fine and old Items automatically being moved to Online Archive
mailbox which just appeared after enabling this on server for above 3 accounts.
The server is Exchange 2010 and clients are Outlook H&B 2013 which comes with DELL systems.
We already purchased Enterprise Licenses as well and have access to Microsoft Download pages to get Outlook 2013.
But since above is working just fine, we really would like to know, if we don't install Outlook 2013 and activate it with that license what in fact we are missing in terms of functionalities regarding Online Archiving!
Really looking forward to hear back from you or anybody who can clear the confusion.
Thanks for assistance!

Nokia PC Suite support for Outlook and Thunderbird

Hi,
I am currently using the Microsoft Outlook 2007 combined with Nokia PC Suite to synchronize the contents of the Outlook with my Nokia N73 smartphone. I am now considering to switch e-mail client from Microsoft Outlook to the Mozilla Thunderbird. So my question is then, is Nokia PC Suite compatible with Mozilla Thunderbird?
I have in fact already installed Thunderbird, but it is not available as an option anywhere in the settings for Nokia PC Suite. All I can find in the Nokia PC Suite settings is a tab called "Microsoft Outlook" where I can choose the different Outlook profiles or change settings. In my humble opinion there should be a new tab added called "Thunderbird" or similar right next to the "Microsoft Outlook" tab in the settings for Nokia PC Suite after installing another e-mail client such as the Mozilla Thunderbird.
I know that there is this option to choose what e-mail client to use upon installing Nokia PC Suite, where I have chosen Outlook. Does this mean that I have to reinstall Nokia PC Suite to get this choice to choose e-mail client to use? If I do reinstall Nokia PC Suite, will I even get to this option at all? Since I am only reinstalling Nokia PC Suite and it is already configured once to be used with Outlook, I'm thinking that maybe this option will not even appear upon reinstalling Nokia PC Suite.
I don't have a clear memory of it but I think I once reinstalled Nokia PC Suite for some reason and I was not presented with this option to choose e-mail client as the first time I installed it. So this may require complete uninstallation and deletion of files and Windows registry for Nokia PC Suite, and then a fresh installation of it to get to this window where to choose e-mail client.
Even when and if I get to that window, it's no guarantee that I will be able to choose Thunderbird even thou it's installed. Why? Because I know from experience that commercial and proprietary software like Nokia PC Suite tends to only support the industry standard platforms and systems and applications, or de-facto industry standards like the extensively used Microsoft Outlook and other Microsoft products. I know by experience that such software as Nokia PC Suite love to lick Microsoft's **bleep**. Don't you think?... or don't you know? You disagree? Well lay it on me, tell me what you think!
I would love to be able to synchronize my mobile phone with my computer, even if I may use a Linux or other nix-like operating system. But if Nokia PC Suite doesn't even support e-mail clients other then Microsoft Outlook, such as the Thunderbird, then it's probably too much to ask for a Linux support for Nokia PC Suite. Or is it?... does Nokia PC Suite support Linux?...

Thanks for your answers!
By this time I have made a clean install of Windows Vista at least three times, and on one occasion I remembered to check this this thesis of mine that I mentioned above. So for the purpose of testing if it's true that the Nokia PC Suite installation process or Nokia PC Sync configuration wizard does not present the user with the option to choose Mozilla Thunderbird as e-mail client, I have done the following.
I have made a completely clean, out of the box installation of Windows Vista on the computer (retail version, non-custom branded Vista version). After installing the needed and important drivers for the system and other software required for the proper operation of the system and few other software, I went on installing Microsoft Office with Outlook 2007 as one of the first software applications. Then I installed Mozilla Firefox and Mozilla Thunderbird. After I had done that, I installed the Nokia PC Suite.
As my thesis predicted, after successfully installing Nokia PC Suite and the Nokia PC Sync configuration wizard was started, I was not presented with the option to choose Mozilla Thunderbird as my e-mail client, even thou both Microsoft Outlook and Mozilla Thunderbird were installed prior to or before Nokia PC Sync. In other words, if this was a limitation of the Nokia PC Suite or it's installer, where it does not recognize e-mail clients that are installed after Nokia PC Suite itself, then installing the e-mail clients in this order should make Nokia PC Suite recognize it. But it did not, or at least as long as the Mozilla Thunderbird is concerned. Thus, this proves my thesis - Nokia PC Suite is currently not compatible with Mozilla Thunderbird. And Mobile Sensei Petrib confirms this also.
Here follows a screenshot of the actual Nokia PC Sync configuration wizard.
http://img341.imageshack.us/img341/9803/nokiapcsyncsd3.jpg
I'm afraid we will have to bear with this. I personally don't believe that there will ever be any official release of Nokia PC Suite that will have full support (or any at all) for other e-mail clients then just Microsoft Outlook and Lotus, or that there will be any official Linux or nix-like version of it. Not today, not in next five years, and not in one thousand light-years from today. We can hope, but the odds are pointing in the opposite direction.
So bear with Microsoft Outlook, and the Windows **bleep**. No pay, no play! Unfortunately... fortunate for Microsoft, Nokia, and others alike, but unfortunate for us end users.
Message Edited by altair8801 on 27-Dec-2008 01:31 PM

Outlook Anywhere Prompts for Credentials only for Outlook 2010, not Outlook 2013

I'm having a heck of a time with this one. We have Exchange 2010 on premise, with our filtering through EOP. Clients that are using Outlook 2010 Professional Plus are continuously getting prompted for credentials when off network and relying
on Outlook Anywhere.
I've read many threads about configuring credential manager appropriately for the internal domain and our external domain. I can get them to authenticate just fine, and email flows, but they continue to be prompted everytime they connect again.
Here is the kicker: When I install Outlook 2013 on the same computer, outlook anywhere functions just fine, no problems, no authentication prompt.
Like I said I have read a plethera of articles and threads about this, I have gone through all settings on Exchange, our edge server, our firewall, our certificate. The MSSTD string matches our "Issued To" string. NTLM authentication
is configured on both the client and the server. Appropriate settings are configured on the firewalls.
Anyone know why Outlook 2010 would have this problem, but not Outlook 2013 on the same computer, same user, same mailbox database?
Thanks in advance!!!

I'd still Echo Ed's original question.
Do you have Outlook 2010 patched up? At this time you need to be on SP1, and SP2 by October the 14th.
Also I expect you to have a recent update ontop of that as well.
http://blogs.technet.com/b/rmilne/archive/2014/04/14/office-2010-sp2_1320_-do-you-need-to-upgrade_3f00_.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Icloud is asking for user name and password for outlook 2010

My outlook is asking for username and password in outlook 2010 after installing the icloud for pc. it says to use my apple id, but that does not work. Any suggestons?

You can't differentiate between subdirectories in Firefox, so even if you would edit the URL then it wouldn't work and you might corrupt the file by doing that.

Installing an add-in for Outlook 2010

We are attempting to install an add-in to Outlook 2010 32-bit on a 64-bit platform.
The installation has been built in Installshield 2012 and on my own profile correctly installs the registry entries (into HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\Outlook\Addins) and the add-in.
When I log in to the same computer as a user and open Outlook, the add-in does not appear and the registry entry appears in HKCU.
I've followed the instructions in this article (http://blogs.msdn.com/b/vsto/archive/2010/03/08/deploying-your-vsto-add-ins-to-all-users-saurabh-bhatia.aspx) and am a little stuck now.
Any help would be greatly appreciated.
Kind Regards, Sumone

Hello Sumone,
Make sure that you did all the steps described in the
Deploying an Office Solution by Using Windows Installer article in MSDN. Be aware, you need to have admin privileges for installing add-ins for all users.

Where can I download the icloud add in for Outlook 2010 for PC?

I recently purchased Outlook 2010 and I don't seem to have the iCloud add in and I can't figure out where to download it. I'm using Windows 7.

I have done that. When I try to synch my contacts and calendar I get the message: "Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
But I do have Outlook configured with a default profile. When I follow the rabbit trail of troubleshooting it comes down to checking to make sure the iCloud add in is active. When I check that, not only is it not active - it's not there. Thus my original question: Where can I get the iCloud add in for Outlook?

Live Office support for Microsoft 2010

Sorry if this is in the wrong forum- not sure where i would ask this.
My customers are starting to use office 2010 and are having problems with office 2010.
Does anyone have an idea of when office 2010 will be supported?
Thank you,
Dave

Please check note 1446026 http://service.sap.com/notes.
XI 3.1 will probably provide support for MS Office 2010 starting from SP4 (This is NOT XI 4.0)
Regards,
Stratos

DAQmx support for LabVIEW 2010

FYI to those downloading LabVIEW 2010 from NI web site:
After Installing LabVIEW 2010 (download from web site), I noticed that there is no support for DAQmx (i.e.. VI libraries) in NI_DeviceDrivers-February2010 DVD (my latest copy). Your have to download and install DAQmx 9.2 drivers (the first to include LabVIEW 2010 support).
Additionally, If you were using Traditional NI-DAQ (Legacy) 7.4.4 VIs in a prior version of LabVIEW, you must do one of the following:
      1. Uninstall current Traditional NI-DAQ (Legacy) 7.4.4 installation and re-install after completing LabVIEW 2010 installation.
          Reason: Traditional NI-DAQ (Legacy) installs support only for the latest version of LabVIEW found on the system.
Or
      2. Copy the the "<previous LabVIEW>\vi.lib\Daq" directory and all it contents to a new "<LabVIEW 2010\vi.lib\Daq directory. This way you can use Traditional NI-DAQ in both versions of LabVIEW.

I didn't have DVDs, I had to download.
Yes it was a mess. The device driver download took forever (NI can't help that). The installation took beyond forever (what else can be done?).
I was disappointed that I had to do all of this backing up of legacy folders and restoring them after installing the device drivers. Why does NI always have device drivers and toolkits install to the latest version of Labview only? Why couldn't they leave the legacy stuff alone?? I still use LV2009 and wanted to try LV2010. This involved a whole lot of trouble and time.
NI needs to provide a much easier way to upgrade, while still allowing previous versions to work without modification. Most people who upgrade will not completely abandon the older versions.
- tbob
Inventor of the WORM Global

How do i get the icloud add in for outlook 2010 64 bit

I am running windows 7 64 bit and outlook 2010 64 bit. I had the icloud add in installed but it became corrupted, so i removed it, but now my iphone calendar does not sync with outlook and i need to find a way to download and reinstall a functioning add in.

I have done that. When I try to synch my contacts and calendar I get the message: "Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
But I do have Outlook configured with a default profile. When I follow the rabbit trail of troubleshooting it comes down to checking to make sure the iCloud add in is active. When I check that, not only is it not active - it's not there. Thus my original question: Where can I get the iCloud add in for Outlook?

Fiddler for Outlook 2010 to assist with troubleshooting

When one of our developers troubleshoots their IIS application, they use Fiddler to capture what is happening.
Is their something similar for Outlook?
We've had a couple of business partners bless our Exchange environment, but folks still experience Outlook pauses or the infamous gathering data message.
I know it is add-ins (love safe mode), but we can't live without them. So, I was hoping that there was a Fiddler like tool for Outlook to assist in troubleshooting.
It's hard to troubleshoot since it is hard to determine a pattern when it happens randomly.
Suggestions are very welcomed.
Thanks
Ron

You can try using OCAT to troubleshoot Outlook issues:
https://support.microsoft.com/en-us/kb/2812744/en-us
Flynn

Send Email Form InfoPath and Vote for outlook 2010

Hi all ,
you know if it is possible to send mail with infopath form (not in attached) by peoplesoft 8.51 and you can change the form with Value peoplesoft. And if it's possbile to send vote outlook by peoplesoft (http://www.technipages.com/outlook-2010-2007-send-a-vote-email.html ) ?
Thanks in advance.

Typically, the form submits to a script that formats the
email and then
sends it. This script could either be on the same page as the
form (in
which case it would only fire if the form has been submitted)
or it can be
on a separate page that is targeted in the action attribute
of the <form>
tag.
In the processing script, you would need to build the
recordset, add the
password from the recordset to the email and then send it.
Does that help?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"chris.cavage" <[email protected]> wrote in
message
news:gj3hj8$nbu$[email protected]..
> Hello....
>
> I have a php form on my page with an email address
textfield and a submit
> button.
>
> Upon submitting the form, I want the form to query mysql
for the email
> address
> from the members table. Then email the 'password'
information to that
> email.
>
> I can create a recordset1 with the sql to select that
password from the
> email
> id.
>
> But how can I script the email form?? I am uncertain
even "where" I type
> the
> script. If I highlight the form on my page, can I
directly type script
> into
> the Action box in the properties windows?
>
> Any general advice as how to script this out? Thanks!
>
> Hope we all had a safe holiday.
>

MeetingPlace support for Outlook 2010

Similar Messages

Maybe you are looking for