Mega 180 @#%%#!!!! Driver Problem

I'm writing more to vent than anything. I also want to see if anyone has the same problem I just had.
Well, I got the Mega 180 running perfectly. I mean this thing was running sweet. I just finished building it, loading all the software, etc. and have been running it for a few days w/o any problems. Then when running it I tried to boot an MP3 and I got an error that no sound card is detected - weird. I looked under properties and it showed that no driver was installed for the onboard sound (where did it go??).
So I tried a reboot and got the BLACK SCREEN OF DEATH (see other post for explanation on this). So I rebooted, entered via vga mode, uninstalled all nVidia drivers, rebooted, and reinstalled all the drivers. Guess what??? Still no sound and only VGA. I tried unloading and reloading several times to no avail. !!!!!!
Is it hardware??? Is it software???? Am I not doing a complete chipset driver uninstall???? Seems to me that after I reinstall the drivers and reboot, everthing should get recognized and installed? That's how it usually works but with the Beta 180, nooooo, not gonna happen. Instead, another mystery problem that I'm going to spend days solving.
I do this for a living (build PCs) and I've had nothing but problems with this thing. I've RMA'd it, it has burt out two 512mb sticks of RAM, I've wiped the disk clean and reinstalled everything. I figure I've lost around $700 on this thing (new RAM, my time, etc). I always use Shuttles but my customer wanted the Mega 180 ---- should've stuck to my guns and told her no!

I just wanted to let everyone know that I solved this nagging video driver problem. As you know, I've uninstalled and reinstalled both the chipset and video drivers many times and I've tried both the MSI drivers and those from nVidia's websits all to no avail. Well, I finally got the thing working - here's how:
1) Complete driver uninstall, chipset and video. Reboot.
2) Don't let Windows install any drivers upon detection. Instead, run DriverCleaner off of http://www.driverheaven.net It's a free driver cleaning utility.
3) I reinstalled the chipset drivers off of MSI's site, reboot, then installed the video driver off of nVidia's site. Reboot.
After that, everything worked just fine. My guess is that a pesky little chunk of a driver was not getting uninstalled during the normal driver uninstall and this little thing was screwing up all future installs.

Similar Messages

Msi Mega 180 Gaming Problems

Hi,
I having problems playing games on my MEGA 180. Everytime I play a game, after 5 to 10 minutes it just stops and goes back to desktop! Sometimes, I get the blue screen of death instead saying (basically) -
A problem has been detected and windows has been shut down......................
DRIVER_IRQL_NOT_LESS_OR_EQUAL
Technical information:
*** Stop: 0x000000D1 (0x2A200003, 0x00000002, 0x00000001, 0xF7B9606B)
*** USBPORT.SYS - Address F7B9606B base at F7B7D000 Datestamp 3d6ddc31
Does anyone know what this means and / or why my PC refuses to play games for more than 10 minutes? Everything else works and runs fine untill it comes to games. The blue screen of death only happens when the graphics card is in. Anyway, heres my spec -
MEGA 180
Athlon XP3000+
Crucial 512mb DDR333
MSI Geforce FX5200 T128
Seagate 120gb hard drive
MSI DVDRW
Standard heatsink, fans, power supply etc.
XP pro with sp 1 & 2
Please help!!
Thank you,
Neil.

Sounds like all of your drivers are not up to date....
Here's what M$ has to say about it (shamelessly copied and pasted from another different website/board post).
Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL
The Stop 0xD1 message indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.
Interpreting the Message
This Stop message has four parameters:
Memory referenced.
IRQL at time of reference.
Type of access (0x00000000 = read operation, 0x00000001 = write operation).
Address that referenced memory.
Resolving the Problem
For additional troubleshooting suggestions that apply to all Stop errors, see "Stop Message Checklist" later in this appendix.
Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.
For more information about Stop 0xD1 messages, see the Microsoft Knowledge Base link on the Web Resources page at http://www.microsoft.com/windows/reskits/webresources. Search using keywords winnt, 0x000000D1, and 0xD1.
Update Drivers
Updated and comaptiable drivers are very important when running XP. Check your hardware with the HCL http://www.microsoft.com/hcl If you hardware is not on the list it does not mean it won't work it just means it hasn't been tested by Microsoft and they won't Guarantee it to be compatible. If it not on the list check the manufacturer's website fo an up to date XP driver, if they don't have one you may be out of luck. This goes for motherboards and the bios too.

MEGA 180 USB Problem

Anyone else have this problem? I recently built a MEGA 180, installed WinXP home, SP1, all the drivers, etc. and the machine ran fine with no problems for a couple of weeks. However, one day when I booted up, my USB mouse no longer worked. In fact, none of my USB devices work. I realized that my front and rear USB ports are all dead. The devices (printer, scanner, mouse, keyboard) all still work in my other PC. Under Device Manager USB Controllers it does now say "Unknown Device". It says this even when I have no USB devices hooked up.
I've tried reinstalling the motherboard drivers, checking all the physical connections on the board, I've even reformatted the hard drive, reinstalled XP and all the drivers and I still have the same problem.
Is my USB bus burnt out? Is the motherboard defective? I've built over 20 computers and I've never had this problem before.
Any help or ideas will be apprecieated!

I just RMA'ed the MEGA 180 - $25 shipping UPS, YIKES!!! And that's not even their 3 day service.
My customer is very upset with me regarding this machine. I built it and tested it, like I do all my customer's machines. Then it started getting buggy, things started acting weird, I lost the USB bus, then it stopped booting all together. I've spent countless hours troubleshooting it, it just goes on and on. I usually build mid to full tower machines and always with ASUS boards and I've yet to ever have a problem. The things build fast, run rock solid, and never give me a problem.
However, this customer saw this machine on Tomshardware.com, fell in love with it, and just had to have it and against my better judgement, I agreed to build it. Now I'm deep in the hole on this thing. If you build PCs for a living, DO NOT BUILD YOUR CUSTOMER A MEGA 180!!!!!! You'll live to regret it. I"m thinking of just buying a new case and stuffing all her parts into it and calling it even.
However, if you don't mind beta testing something (at your expense) and you don't mind loading drivers, reloading drivers, erasing the drive and starting over again, trying to get things to work, getting things to work, have them stop working, etc then this machine is for you. Me, I think I would rather just hit my head with a hammer.

Mega 180 DVD problem

Dear all,
I know the problem with optical drives has been discussed many times, the NEC ND-2500A is supposed to work (somewhat).
With me it has been working almost ok for some time but now it shows the typical behaviour that many had to complain about with their drives:
- system hangs when change disc, need reboot
- eject button stops working
Sometimes, when I am lucky, I reboot and I manage to acess a CD or DVD, but I can never eject, if I do by opening the lid and pressing the drive button and try any other disc, it will hang.
I thought perhaps this was due to something I had installed, but no, I have two OS loaded, I checked with both and I get the same behaviour. I don't think it has to do with the drive itself, did not flash it and did not record anything recently. Autoplay is disabled. I reinstalled the original drivers that came with the PC, nothing.
WHY?
Can someone please help?
Thanks in advance.

> What do you mean by "somewhat", did you have the eject problems from the beginning?
Jadi,
The eject button of the Mega sometimes stopped working but I could simply eject by pushing the button on the drive. Reading the discs was not a problem.
> Have you tried to unplug the powercord? This will cause the Bluebird controller to reset itself. I can imagine that the BB controller software is not fully compatible with the NEC 2500 although it worked from the beginning.
Actually yes, I had to unplug a few times to open the box and check if every connection was OK, I booted without the drive and than agin with it to see if anything would change, no result, still hanging.
ANYONE HAS AN IDEA???
WHY DOESN'T IT WORK ANYMORE?
> Something else, how does your MEGA 180 perform with the 30" (!!) LCD screen?
Excellent so far, especially with DVDs (now nix) but it depends how you want to use it, knowing that picture artefacts become more visible with larger sizes.
I am using the MegaPC as a Multimedia center in the living room for everything (including DVD and Divx playback, Sat receiver and Hard Disk recorder, MP3 jukebox, streaming radio) but the instability of the Mega forced me to keep the standard CE equipment around for back-up.
Dark scenes are a bit the weakspot for LCD vs plasma because of backlight, but brightness is better, and for the rest is great.
Another problem in my setting is deinterlacing with TV content from satellite. I use the Moonlight's Elecard SW decoder. With high motion sequences especially (eg sport) the performance is poor. I am not sure if a good AGP video card would bring about any improvement, I guess is a SW issue still (performance limit?). I tried the ATI AIW 9800 in the past, graphics looked nice, but the TV was not satisfactory, so I use the RF tuner of of the 30"LCD at the moment.
If you consider buying a widescreen display to use with a HTPC, the 300WN5QS is great, it is a monitor with TV fiunction, so has all the setting features you'd expect from a high-end monitor, not the crappy CE settings you find on TV sets.
(I don't mean to do any advertisement here, but if you are interested in specs you can check: http://www.lcddiscount.nl/LCDDiscount.html?url=/Philips-300WN5QS-Zilver-details-thuisbioscoop.html )
Cheers,
Marc

HD 3450 in Mega 180 - connection problem

Hi,
I'm planning to buy an ATI HD3450 based card, Asus brand. It has an additional molex power connector on board. I do not have any spare molex connectors left in my Mega 180. I'm not using the one marked by MSI as for ODD, because it is always powered on, so I use the other one for both HDD and ODD.
Would I burn the PSU if I use the same 12V line for molex (and connect it to HD3450) as I use for HDD and ODD? I might be a little to much for the PSU 12V line to hold and power all 3 devices at once.
Does anyone know what is HD3450 card demand for power? I've been looking over the internet for 2 days and I found various answers: from 36 Watts up to 75 Watts.
36 Watts is OK for Mega PSU but 75 is out of it's range (+CPU, HDD, M/B, ODD, RAM).
Why do I want HD3450? It comes from Asus as low profile and it is AGPx8. Low profile VGA means more hot CPU air getting out easily (both CPU fans reversed).
To those who have ATI 9700/9800 series and nVidia 66xx series: you have an power supply connector on VGA board, 6 pin or molex, how did you connect it to the PSU? Did you use the same power 12V line as for HDD or adopted an another one?
Is it possible to connect the unused SATA power connector to VGA? Yes, I know I have to adopt the connector, cut the SATA connector out and solder in molex or 6 pin, but that's the easy mechanical part. My question is about the electrical part. How many Amperes can it sustain at 12V?
Thanks for all answers (I hope) in advance :-)

Thanks, but take a look: http://www.diamondmm.com/3450PE512.php , Specifications tab. It says "Power Consumption : 75 Watts".
This spec if for 512MB PCI-E version, but I do not think that 256MB AGP version is so much different.
Where did you find 25 Watts info? If that was true the card would not need any additional power, I suppose that AGP slot can provide 25 Watts itself.
I'll try to connect my ODD to the other molex (the one MSI designed for it). I'm not worried about any power drain when it's not oparating, I just hope it is safe for the electronic equipment such as ODD to be constantly powered.
Does anybody have HD 3450 in their Mega 180? I have read that this card has some problems with nVidia chipset based mobos. At least had a half year ago. I cannot find any info if this issue has been fixed by Asus (no specific information in thier latest driver changelog).

Mega 180 voltage problem

Dear all,
I just bought this Mega 180 with Athlon 3000+, 1G RAM, using the onboard graphics card.
I took the advice in this forum and reverse the fans direction, although it decreased the cpu temp by 3-4C, but it increased the sys as much as 8C... I think it's something which we need to be aware of since the cpu certainly can torlerate higher temp than, say the board and harddisk...
OK, let's talk about my problem, two days ago, when I was running sandra 2005 ram/cpu benchmark, PC alert 4 warns me that the 3.3V supply is too low, it drops down to 2.8V once...
My initial thought was that it's because of the high internal temp which gives extra resistance to the board circuit, but after I reverse back the fan, it still stays around 3.13V... which by the ATX standard (3.3V + or - 5%) it's still dangerously low...
Can anyone here share what their voltages are? and does anyone knows whether my voltage would have any negative effects?
Another observation to the Mega180, I hear some little buzzing noise when I run the cpu/ram intensively, is it normal?
Any help/advice would be greatly appreciated, thx
Kevin

Quote from: sorchu on 02-March-05, 08:31:58
Has anyone got problems with the 3.3v low voltage lead?
No problem but PC Alert4 shows me strange values:
3.18 for 3.3v
5.02 for 5v
N/A for 12v and when I test the 12v with another software like speedfan it shows me 10.1v and even 9.8v
But everything is fine, I don't have any strange behavior or misfunction.
I have a real buzz too, when I play 3D games or when I use my TV tuner. It's certainly a capacitor.
Sorchu, for your sys temp problem, do you remove the HDD cage?

New MSI Mega 180: Some problems...

I've just bought a new MSI Mega 180... and I've come up with some problems:
I can't get the radio to be detected in windows... not sure why. When I load, radio webupdate, it comes up with: Cannot find radio module.
I can't get into the Wireless configuration monitor. If you select Gateway or AP mode, and then hit configure, it comes up with a pw prompt, and I can't find what to put in there... that's driving me nuts...
When I'm running windows, the front panel is compleatly black, should it be showing anything?

Quote
When I'm running windows, the front panel is compleatly black, should it be showing anything?
The clock should be on or if you installed PC Alert it would show the CPU temp. and stuff like that. I think media centre 3 shows something on the display (I can't get it installed)
Can't answer your other questions.

Mega 180 setup problems

I'm having various problems setting up a Mega 180. Spent 2 days installing software, then hours uninstalling various bits to get the remote control working with Media Center III!
Using MSI 8606 recommended TV card it will not find any TV channels. Cable was unpluged from a WinTV card which found channels, even with XP service pack 2 installed. Anyone had any luck finding channels?
Final straw came after 2 days installing, PC shut itself down and will not now boot. Hi-Fi function works but pressing PC button has NO effect (power supply fan does not turn). I suspect a failed power supply so now I have to take apart box it up and arrange for supplier to collect. Then wait for supplier to test it, verify fault and arrange for delivery of new unit.
Can anyone out there offer me light at the end of this dark tunnel that it is possible to get this thing working, I mean properly, not some part working bodge?
I'm feeling very fed-up at the moment, as you can tell!

Take ir easy, man!! Don't be
Maybe your unit es faulty or badly configured. The best and easiest is pack it and return it to the shop and let them test and fix it up! You could have tried some tricks that solve 90% of computer-related problems. stop-start
Clearing CMOS, some problems dissapear. Unplugging from the wall for a couple of minutes also solves a lot of problems. Mine didn't boot up when with my TVCard installed. Suddenly, one day, everything worked ok.
Nowadays, my systems run REALLY good; is very stable and with low temps and noise. Of course, remote control is , lcd is more and so msi software is but.... with a little of patience, you'll get a good HTPC ready!!

Mega 180 display problem

I' m using the onboard S-Video out to display on my 27" flatscreen CRT TV. The problem is with this output that it displays. It's a little hard to describe, but it reminds me of adjusting the pincushion controls on a computer CRT. All 4 edges of the screen aren't straight. Instead, they are bowed in slightly. I've tried adjusting this problem away, but alas my TV doesn't have controls to tackle this problem. Yes, I'm using the proper video encoding for the U.S., NTSC-M. Is this problem normal, or something I should expect from this unit?

I'm currently using 56.72. I've tried the Windows default drivers, the ones that came with the install disk, Windows Update drivers, and the latest, version 56.72. All have given me the same problem. I don't think the problem is with the drivers.

Mega 180 remote problems

Iam having problems with my remote in both hi-fi mode and media center.
in hi-fi mode it is very slow and i have to sit right in front of the unit.
in media center mode it just wont work.
after re-installing media center it worked and then the next time i tried it it didn't again.
I have heard there is a firmware update around (not on msi update) if there is any one out there who has it please let me Know.

Iam having problems with my remote in both hi-fi mode and media center.
in hi-fi mode it is very slow and i have to sit right in front of the unit.
in media center mode it just wont work.
after re-installing media center it worked and then the next time i tried it it didn't again.
I have heard there is a firmware update around (not on msi update) if there is any one out there who has it please let me Know.

Cd rom boot problems with MEGA 180

I recently recieved my MEGA 180 and have been unable to successfully install an OS because when I boot from CD, the computer freezes at various stages of installation. The point at which it freezes varies between the point at which the CD is initialized to anywhere in the windows xp setup process up untill the drive format. Occassionally the lockup coincides with an error copying a file, but this is not consistent. I have tried two different cd-rom drives as well as three different xp installation cds. Further I have run with 5 different sticks of ram (kingston and corsair). None of these changes have had any obvious effect.
Having read the warning labes regarding non MSI optical devices, I am tempted to think that may be the problem as I am not running on an MSI drive. However, the warning souned like it was about mechanical parts and thus I assume the ability of a drive to fit in the MEGA 180 case while opening and closing correctly.
I would appreciate any input you might have on this matter as I am finding this experience rather frustrating.

I had the exact same problem when upgrading from a 2100+ Palamino processor to a 2800+ Thoroghbred one. The screen had already dissappeared due to powering up with no monitor plugged in, so I tried a reinstall of Windows XP. It kept falling over randomly during the install process. I then swapper the CPU back and had no problems at all. I have since lapped the heatsink and reduced the FSB to 157MHz in the BIOS, and have not had a problem with the 2800+ CPU. I have not tried installing windows again, but feel this will be OK too.
My test is to run FujiFilm Snapshot Slideshow, which sends the CPU temp rocketting. I have found that when it goes above 70 C it starts getting unstable. I throttled the FSB back to 157MHz and it does not get to 70 C any more. In normal operation it never gets above 60 C, so I don't know why the slideshow takes so much CPU power

MSI Mega 180 problems

Hello all, i'm quite stuck on something and need some help.
I have recently purchased an MSI Mega 180 deluxe and installed an pioneer a07 dvd writer in there, for some reason it won't let me burn cd's in audio cd format from wav files, which i need for my music studio.
Also i constructed an external case to put an internet pioneer a03 dvd writer and did the same process and believe it or not i was able to burn a audio cd, so not sure what the problem is, could the msi mega 180 dislike my newer model of pioneer, or is the pioneer on it's way out, which i find strange as it's newer and quite new.
I use nero to burn most of my cd's or dvd's which had no problem with when the dvd writer was on another desktop, it seems to get up to 26% and just freezes there, which the buffer level not moving at all.
Hope someone can help, thanks

Sounds like all of your drivers are not up to date....
Here's what M$ has to say about it (shamelessly copied and pasted from another different website/board post).
Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL
The Stop 0xD1 message indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.
Interpreting the Message
This Stop message has four parameters:
Memory referenced.
IRQL at time of reference.
Type of access (0x00000000 = read operation, 0x00000001 = write operation).
Address that referenced memory.
Resolving the Problem
For additional troubleshooting suggestions that apply to all Stop errors, see "Stop Message Checklist" later in this appendix.
Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.
For more information about Stop 0xD1 messages, see the Microsoft Knowledge Base link on the Web Resources page at http://www.microsoft.com/windows/reskits/webresources. Search using keywords winnt, 0x000000D1, and 0xD1.
Update Drivers
Updated and comaptiable drivers are very important when running XP. Check your hardware with the HCL http://www.microsoft.com/hcl If you hardware is not on the list it does not mean it won't work it just means it hasn't been tested by Microsoft and they won't Guarantee it to be compatible. If it not on the list check the manufacturer's website fo an up to date XP driver, if they don't have one you may be out of luck. This goes for motherboards and the bios too.

Mega 180 - Install Video Card or Install Video Driver

I just spent 6 hours at a customer's house trying to fix the Mega 180 I built for her.
As I stated in a previous thread, the machine was working fine and then she experienced the BLACK SCREEN OF DEATH. This is when your machine POSTS, loads Windows and just before Windows starts, the monitor goes dead. Windows still loads and if you remember where icons are on the desktop, you can click them and stuff happens. The monitor just stops getting a signal. However, if you hold down F8 during boot and chose VGA mode, you can use Windows in VGA mode. The monitor being used is a Sony Multiscan200ES.
Once in Windows, if you look under device manager, you'll see a listing of Unknown and under that it lists nVidia GeForce4 MX Integrated CPU.
So, I've tried the following fixes:
1) Uninstalled all chipset & viideo drivers, reboot, reinstall chipset drivers, reboot, reinstall video driver, reboot. BLACK SCREEN OF DEATH.
2) Uninstall video driver, reboot. Windows starts under the generic driver. I install the video driver, reboot, BLACK SCREEN OF DEATH.
3) Figuring there had to be an easier solution to this problem, I installed an ATI Radeon 8500 card that I had laying around (I know this card works) figuring that I'll just sidestep the whole video driver issue by not using the onboard video. Things just aren't that easy because after I installed the card the machine won't even POST. It turns on but nothing happens. ARRRR!!! I try reseating the card, nope - nothing. I take the card out and use the onboard graphics to make sure everything is ok in BIOS. I read that if the BIOS detects an AGP card it will automatically disable the onboard graphics but it doesn't seem like that's happening. So I look around BIOS and there is no way to disable the onboard graphics. I have it set to boot AGP first, etc. and nothing works.
I guess the last thing I can do is reformat the drive, reinstall windows, and reinstall everything else. But I don't want to do this because the machine is all set up, been used for a while, and it takes so long to reinstall everything.
My question is this. How can I either reinstall the video driver so it works or how can I install a video card so it works? Ideas???

Quote
I'm going to hunt over at nVidia's website to see if they have a cleaner utility (ATI does for its Radeon drivers - rids the system of every last trace).
nVidia don't need a cleaner utility cos their software is better written!
stab in the dark - the vga lead is connected to PRIMARY vga port?
go to add/remove programs and Remove "Nvidia Display Driver" in Safe mode
restart your computer and it should boot into VGA mode, and prompt with Found New Hardware. cancel this.
the nvidia software will leave the install stuff on your computer, usually in C:\NVIDIA. browse to here and find and run the setup.exe to reinstall the software.
if its been working before, then its probably not a memory issue - it might also be worth making sure the latest nforce drivers (3.13) are installed too.
oh and customers usually WON'T admit to messing around to stuff they shouldn't - in my experience anyway!!

MSI 180 - Graphic driver problems

Hi folks,
after cooling down my Mega 180 from 48 degree to 34 degree start-up-termperature (heatsink lapping, turn fans around, build in a fresh air duct for cpu fan) my system is running very stable - what a great lap forward after days full of frustration. Thanks to live update I have the newest bios (rev. 3.5) and drivers for my hardware installed. But I'm still facing some smaller problems, maybe is this forum I can find a hint how to handle that:
1.) TFT-drivers not accepted
I'm using a Hyunday Q17 TFT display and I never had any problems with my old system to identify this correctly. But with my MSI 180 XP installed 5 (!) default displays and will not accept the correct monitor driver I have. When I try to delete 4 of this 5 from the control panel XP re-installs them during the next boot-process. My question is: why 5 displays and why just default displays??
2.) Flickering and coloured stripes after booting
Sometimes, when Windows is alreday started, the display changes from the "Welcome"-Screen to some colourfull stripes and seems to be frozen. After hibernating and re-starting everything is o.k.again. Diver bug ?
3.) Black screen
When entering the windows desktop, the screens turn black for 1-2- seconds, then again it show the desktop, then again 1-2 seconds black. It looks like the driver tries out various video modes. But I don't know why ???
Conclusion is, that there seems to be a bug in my graphics driver. I tried to load the newest once via Live Update, then again directly from Nvidia website, but nothing changed. Any ideas about that ???
Any hints for me ?? Thankx in advance
Flo

Thank you for your reply. I think, i should try to describe my problem more clearer :o)
I'll check later, when I'm back home, in Nvidia driver are installed properly. I just checked, if there is a question mark somewhere in system control panel resource overview. But everything looks fine.
The flickering is a little bit more tricky: When starting the PC instead of my windows desktop a colorfull page of thousands of colourfull stripes appears and flickers like a rainbow. Windows is definitively running, I can can use all keyboard short cuts e.g.. It is not the type of flickering when running under low frequency. Maybe this, comnined with 2 seconds black display, is part of the famous "black display" issue.
My last machine was able to identify my TFT correctly as a Hyundai Q17. But at that machine it was connected by DVI, not the analog connection. Maybe that is my problem. I'm still looking for a small graphics adapter with digital out (nothing special, I'm really happy with the onboard graphic controller, I'm not a gamer), I'm afraid my old fullsize FX5200 might be too large for the Mega.

Compact Flash Drives/Other Probs Mega 180

I've had my MEGA 180 for almost two weeks and like many here it has been a pain in my butt.
After reformatting and installing the software in a certain order I finally got my system somewhat stable, but I am running into new issues now.
My compact flash drives no longer show up in my computer, I can't find them in Device Manager either. Also every now and then my network card will only send not receive. Tried different cables and it's no help. It may also be my cable modem, but I don't know.
I'm not running the nForce IDE SW driver because if I do I get the eject button lock-up problem people are having, but the performance leaves something to be desired.
My PC Alert also died, it was working fine. Now if it is allowed to boot it will not completely load its GUI and begin to say my CPU is running way hotter than it is and after a minute of 100% CPU it will cut off my computer if not killed. I just un-installed it for now. The funny thing is, their Fuzzy Logic program works for getting the temps.
I'm in a back and forth email wth MSI Taiwan right now, but I don't see it going anywhere. Hoping like everyone else these issues can be fixed with driver and BIOS updates. I would be EXTREMELY unhappy to have to go through an RMA process even with companies that have good RMA policies.
As far as their bundled software, MSI Media Center is the biggest POS I have ever used. I am currently using ShowShifter and it works REALLY well with my 8606 master tuner.
Enough ranting for now, if anybody else has similar problems, let me know. If you have solutions EVEN BETTER!

xp sp1a, all patches, etc.
PC4000 (yes overkill, but I got a good deal on it)
I had 2700 in it and it still acted the same way so I doubt memory is the problem.
Now my damn tv tuner is being an ass and is making it so I can only view the cable right in RGB24, not the default YUY2. In YUY2 it is almost like the brightness settings/contrast settings are all wrong, but adjusting them doesn't do anything. It worked this morning.
If I had a dollar for everytime I had said "it worked this morning" with this thing I'd be able to buy something else.

Mega 180 @#%%#!!!! Driver Problem

Similar Messages

Maybe you are looking for