Mega 180 lost audio and multimedia drivers

Hi,
I had this barbone since June 2004. All working well and two days ago, without any specific reason, no more audio.
In the materiel panel of XP,  all the multimedia driver are with the "!".
When I tried to reinstall the driver from MSI disk or from Live update, no problem. Except that the driver always with "!".
I tried to desinstalled all of them and relaunch XP, same.
I wonder if this can't be a hardware failure from my PC. How to check it ?
Thanks for your help,
Laurent

I think i had the same problem once.  Dit you try to unplug   the power. Plug it in again    and boot you're system. Don't know if you have to reinstall the drivers again.
Good luck

Similar Messages

  • I have windows on my mac and lost audio and can't connect to the internet.anyone else having this problem? Or have it installed at the apple store?

    I have windows on my mac which was installed at the apple store. I have lost audio and cannot connect to the internet on the windows side. Mac is ok. apple genius and tech support can't help me and say I need to go to microsoft. In fact the tech support was unaware that windows was loaded on by the apple retail store. Has anyone else had this problem?I recently bought fusion thinking this would help bridge between the two( as told by the genius bar) but it didn't help.Any ideas?

    hey mate i used to have the same problem and i got computers maintenance guys out to fix it in the end and all it was, was the router.. got a new one and it was all good after that! i think some routers just arent compatible for some reason or another.

  • Audio and video drivers for IBM Lenovo think center Pc

    Hi
    This is shiva and i require audio and video drivers for the following pcLenovo ThinkCenter M/T -9389-A76 S/N- ****** where to get it please mail me or leave a scrap here , regarding the link. *@*
    Moderator edit: Removed serail number to prevent mis-use. Masked member's email address to prevent it from being scooped up by the spam crawlers. Please use the private Message (PM) feature instead. Click on the member's name>Send this user a private message.

    Hi Shiva,
    You can find drivers here:- http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-66440
    If you have XP then you might require following for audio as well:-
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-65440 [SP1]
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-65456 [SP2]
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • HP 15-R074TU Audio and Video drivers

    Hello,
    Recently 2 weeks back I have bought  HP 15-R074TU laptop free dos. I have installed windows7 64 bit.  And other required softwares, I have problems with audio which is very low.  Video display is not proper, movies are not comfortable to watch without any reason get stucks. I have installed HP recommended video and audio driver but still having problems.
    Requesting you to recommend the audio and video drivers for HP 15-R074TU model, which will be very helpful for me
    This question was solved.
    View Solution.

    Hi:
    See if the graphics driver directly from Intel works for you...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24245
    Try the audio driver directly from Realtek.  Accept the agreement.  DL and install the second driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...

  • All Drivers are working fine EXCEPT Audio and Modem drivers on my G430

    I have a lenovo 3000 G430 4152C2Q that is 1 month old.It came with Vista home but I uninstalled it and installed Windows XP SP2.I downloaded all drivers from Lenovo's official site for my Laptop's type and installed them. Now I'm not able to install Audio/Sound drivers and not able to connect to Internet as it's giving me some error messages for both.(I've installed patches and hotfix already).
    I've seen most of the people having same problem, So I tried following instructions given by members in some other posts but still I'm not able to make it finished and same problem is there. Please help me asap with clear instructions so that I can install Audio drivers and modem drivers...as I'm a techie and most of the times I use internet for my work.
    I will highly appreciate any kind of help.
    Thanks in advance.

    Hello,
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!
    Curtis

  • Audio and wireless drivers for c738tu

    hi. i had to recently install windows xp on my compaq pressario c738tu. now there is no audio and the control panel shows no audio device installed. also my wireless network and ethernet controller is not working. i downloaded the available drivers for xp from the hp site, but to no use. please help.
    Message Edited by swastikagrawal on 05-27-2009 07:39 AM
    This question was solved.
    View Solution.

    Hi,
    Before Conexant Universal Audio Architecture (UAA) here
    Conexant High Definition Audio Drivers here
    This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
    Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
    Open the Device Manager:
    1. Click on Start and select Run. Now type devmgmt.msc and press enter.
    2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
    3. Select "Install from a list or specific location"
    4. Click Next. Then select "Don't search, I will choose the driver to install"
    5. Click Next and then select "Sound, video and game controller" from the list.
    6. Click Next and then click Have Disk.
    7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
    Similarly install Modem Drivers:
    Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
    1.Right click on "Modem device on High Definition Audio Bus" and click Update driver.
    2. Select "Install from a list or specific location"
    3. Click Next. Then select "Don't search, I will choose the driver to install"
    4. Click Next and then select "Modem" from the list.
    5. Click Next and then click Have Disk.
    6. Click Browse C:\swsetup\sp33890 folder and select the .inf (wis30b2b) file and click open and Continue with the onscreen instructions. 
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Audio and video drivers defect?

    Hello there,
    since yesterday i have a big problem with my iMac. It can't play any Audio and Video anymore. Video editing like Final Cut Pro 7, Premiere Pro and After Effects are crashing, when youre trying to start them. Same thing with iTunes and Diablo 3. Photoshop seems to work fine. Browsing in the internet is fine but also no video and audio here. And my system seems to be way slower than before.
    What did happen? Well i was working in after effects and hearing some music via iTunes and had some preview running in the finder (cover flow i think is the name of feature), Then the sound stopped but i didnt bother to much about it. But then cover flow also stopped working. So i did a restart and after that the problems were there.
    My Suggestion: After Effects is missing output-modules, in the audio menu in the system preferences there is no output modul avaiable either (no, even no digital) although the boot sound works perfectly. So i guess the drivers for audio and video aren't working anymore. But i have no idea how to fix this.
    What i've tried: i've reseted  the nvram two times, i install mac os X snow leopard again (without deleting the previour installation) and run all updates. I also reseted the System Control Manager (unplug the imac for fifteen seconds) and run the Apple Hardware Test. The latter said there is an error 4MDT/4/40000003:HDD -1299. No fking clue what this means. Google didn't help.
    Can someone help me pls or do you know if the people at the genius bar can handle this kind of problem? I have an appointment at the genius bar on saturday, but i have no idea how trained these people are at fixing mac os issues.
    ah and before i forget: i didnt configure the time machine :/ so there is no easy moving back to a time the imac was working.

    Yeah i know its the hard disk drive. I just cant find anything what this code means besides theres something wrong with hdd
    And yes i already backed it up, but anyway thanks for your advice.

  • Lost audio and rooms disappearing

    I'm checking to see if anyone else is having increased issues in a couple of areas (it has gotten so bad, we're having to look at alternatives):
    1. We had multiple recorded classes last week. When we went back to listen to playbacks, only half had the audio track. (We do a lot of these, so we're sure it wasn't user error.)
    2. We scheduled a multi-day class. When we went in to start the calss, the whole room and all setup had disappeared.
    3. During a class, we suddenly lost some of our pods, and could not bring them back.

    We did report these cases to Adobe.
    The response on the disappearing room - "no clue"
    No response after 5 days on the lost audio. We've had to reschedule classes at significant lost revenue to our company.

  • Mega 180: Lost my Remote Control

    i just lost my remote control for my mega 180. is there any chance to use one of those universal remote controls ? what settings do i have to use ?
    thanks

    The Mega 180's remote control is not a standard supported by the universal remotes. I have a learning remote. It was even difficult to get the learning remote to learn the MSI codes which leads me to believe MSI is doing something out of the ordinary on their remote.
    You will either have to find the remote, try to buy one from MSI support (good luck!) or ebay, or  get a USB or serial attached remote. This will not work with the HI FI mode however.
    If you have a pocket PC PDA you may be able to find a module for the MSI remote that would work with their very good remote controller program. But this will be quite an adventure..
    I'd recommend trying to buy one from ebay first or MSI second.

  • Audio and Modem Drivers - No Soundmax

    All,
    After pulling my hair out yesterday I wanted to share my findings. I have a T61p with a Thinkpad modem. After using the modem for about 2 minutes it will crash BSOD citing HSF_CNXT.sys. Upon restart I did not have audio. I did not realize that my modem and audio share the same bus. Long story short if you use your modem and your laptop crashes and upon restart you have no audio or modem do not do the whole uninstall/reinstall driver routine. Simply turn off your laptop, unplug the power supply, take out the battery, press the power button put it all back together and restart and it will work (hopefully). Go buy a real external modem and forget you have an internal modem.
    Hope this helps.

    Hi
    and why you dont visit the Toshiba driver page and download the right drivers???
    The Toshiba driver page provides XP drivers for Tecra A6 PTA60E and for Tecra A6 PTA61E.
    If you dont know what Tecra you exactly have please check the label at the bottom of the unit!!!!
    I hope and think that everything is clear now.
    Have a nice day ;)

  • Playing video, audio, and multimedia formats in PDFs

    This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/using/WSB6650383-BF2F-49a7-9191-F06461D00968.html

    The available options in Preferences > Multimedia (legacy) > Preferred Media Player are only Flash and QuickTime for Adobe Reader 11.0.0 in Mac OS X 10.8.2, but still, audio files are launched with an external multimedia viewer other than iTunes, while these audio files are configured to be opened with iTunes and double-clicking opens them with iTunes, meaning the operating system does open these audio files with iTunes. There is definitely something wrong with the way Adobe Reader handles multimedia content under Mac OS X. Thanks again for your help.

  • Lost audio and slowed video after changing to WIN 8

    Apparently there were drivers to correct this issue from conexant high defintion audio 220. Is there any chance that drivers will be updated?  And video has slowed down by 4 times. 

    Did you use the Microsoft Compatibility Center for Windows 8 . before you upgraded to Win 8?
    Here please look at this link, the Compatibility center is in there as well as a lot of information you need,
    Basically it says
    HP provides upgrade instructions and drivers for most computers sold after October 1st , 2011.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03451712&cc=us&dlc=en&lc=en&product=4064844&tmp...
    You may have to go back to Win 7, on the other hand you can try to load Win 7 drivers on Win 8, does not always work though.
    I hope this helps explain where you are at and what your options are.
    Good luck.
    I am an HP employee
    Knowledge is power...Power to the people

  • Hardware specifics on audio and Linux drivers

    S300-EZ2502 owner here.
    Pretty happy with how it works with windows. Never much liked windows though.
    Did an Ubuntu 9.04 installation.
    Everything except audio worked.
    I am confused as to who made the driver and to whether there are Linux drivers and configurations for this card.
    Linux has always worked well on my prior Toshiba Laptops.
    Solved!
    Go to Solution.

    Eureka!
    If you use the link I posted earlier and/or info from here: http://ubuntuforums.org/showthread.php?t=416207&page=4
    ... What it involves is changing the codec by editing the alsa-base.conf file... 
    sudo /etc/modprobe.d/alsa-base.conf
    ...then adding a line to the end of the file...
    options snd-hda-intel model=auto
    ... only "auto" didn't work for me. Tried several of the options at http://git.alsa-project.org for my sound card before finding one that worked.
    Doesn't make a whole lot of sense, but this works for me:
    options snd-hda-intel model=acer

  • Need audio and modem drivers for Tecra A6

    Hi there,
    I couldn't find the drivers (audio+modem) Tecra A6 EZ6411 for WXP SP2.

    Hi
    and why you dont visit the Toshiba driver page and download the right drivers???
    The Toshiba driver page provides XP drivers for Tecra A6 PTA60E and for Tecra A6 PTA61E.
    If you dont know what Tecra you exactly have please check the label at the bottom of the unit!!!!
    I hope and think that everything is clear now.
    Have a nice day ;)

  • Lost audio and video in existing projects

    In already finished HD-projects parts of video and audio clips (MXF-files, Motion- and MP4 files) can't be viewed and played in the viewer and canvas anymore. Video became black (thumbnails are visible) and audio is not audible while the waveform is available.
    The problem seemed to be influenced by the rendered content of the timeline in the sequence.
    So I removed all the rendered files in the Render folder with Render Manager and re-rendered the sequence with no positive results. Moving everything to a new project, reconnecting or re-importing the files into the same project make no difference at all.
    Only when I'm importing the files into a new project the clips can fully be played.
    Software and settings:
    FCS 7.0.1
    OSX 10.6.2
    MXF-files Ikegami HS V10 (high end) imported via Calibrated Software (CalibratedMXFQstat)
    Compressor XDCAM HD 422 10801 50 (50 Mb/s)
    Sequence preset Apple ProRes 422 (HQ) 1920 x 1080 50i 48 kHz
    AJA ioHD digital interface
    All software and equipment is up to date.
    Any suggestion?
    Anton

    I think I could solve my problem:
    The CalibratedSoftware application CalibratedMXFOptions seemed to be switched back to the Demo license (it's not clear why?), which terminated the duration of the imported files to 30 seconds. Re-activating the proper license and using the QuickRefresh for FCP application updated these files and made FCP recognizing the proper duration of the MXF an MP4 files.
    That was not enough. I opened a new project, saved it and opened parallel the 'damaged' project.
    That was all!
    Thanks
    Anton

Maybe you are looking for