MEGA 180: Media Center deletes radio stations of HiFi Mode

Hello
We have the following problem: Media Center III deletes the radio stations programmed in HiFi Mode!
- I programmed the 6 stations in the HiFi Mode as described in the MSI manual
- Switched to the PC mode and started Media Center III and entered the radio section
- After shouting down the PC and switching to the HiFi mode, the 6 programmed stations are gone away.
The problem only appears when using Media Center. It seems that Media Center deletes the stations when communication with the radio tuner.
Thanks for your help!
Best regards
Patrik

the problem is the fact that the radio tuner isn't a "physical" device that Windows recognises
damn MSI and their proprietory hardware!! surely some sort of USB tuner "hardwired" to the USB controller would have been a better solution? grr, but then how would that have worked in Hi-Fi mode...

Similar Messages

Mega 180-----Media Center III and a Vid Card----Working???

I'm trying to narrow down what is causing Media Center III to crash intermittently on my Mega 180.
I think I have it narrowed down to the SoundStorm drivers conflicting with Media Center III
But I want to eliminate that it is a problem with the 18G "Crush" onboard video chipset. I am using the onboard only.
Anybody have a vid card in their AGP slot of the Mega 180 and use Media Center III??
Are you still getting crashes in Media Center III??
John

Finally I give up using the Media Center. I'm using now Girder with Nathans great plug in (see MSI Mega series girder plugin version 1.0 available ). The only disadvantage is that the fancy leds are not working.
Regards
Patrik

[Mega 180] Media Center III with Hauppauge PVR250

Hi
We have a problem to get the TV card installied in MSI Media Center III deluxe.
The TV card (Hauppauge PVR 250) works very well with the Hauppauge WinTV Software - but there seems to be no way to integrate the tuner card in Media Center.
We proceeded like this:
- We startet MSI Media Center III deluxe und selected Television
- In the Setting the WDM Driver for the Hauppauge Card was selected.
- Here is the First Problem. It is impossible to selecte Cable as source. After selecting "cable" media center switches autmatically to "antenna"
- We pressed the button for automatic programming but it just did nothing.
Do anybody here has the same configuration and got the card working?
Can somebody post us his WinDVR3.prog file (if this is the file for TV programming). Perhaps we can program then television manually.
Thanks for help
Greetings
Patrik
PS: We know that a MSI tuner card is recommended.

Finally I give up using the Media Center. I'm using now Girder with Nathans great plug in (see MSI Mega series girder plugin version 1.0 available ). The only disadvantage is that the fancy leds are not working.
Regards
Patrik

Mega 180/Media Player/Graphic Card/TV-Out

Hi,
after very long research I decided to use Mega 180 as a dedicated PC for media center purpose and to connect it directly to my TV (Siemens 100 Hz real flat 16:9) and to upgrade my second PC and to connect the two PCs wirelesly and to use Media Portal software.
And then I have started to read related posts and forums. But this time I learned that there are new issues I have to deal with.
1. TV-out: The TV-Out of Mega 180 is not good enough on a TV. My question is do I have to buy another powerful graphic card? I need recommendation. My TV has composite and scart inputs.
2. Media Portal: This software has lack of some features. If I use MCE 2005, will it be better?
3. If I use a video converter, will it help me to find better picture on my TV?
Yes bodies, unfortunately there is no way to find the best solution. And I am at the final stage. If this solution does not run, I will give up. I need your recommendations.

This is copied from another reply I made today. The Mega 180 can drive a TV just fine. But you need to spend alot of time making it work.
How you hook up to your TV depends on your available TV connections and your quality standard. The Mega 180 does have an SVideo output. I don't use this however. I have a VGA input port on my 42 inch plasma monitor. It accepts VGA 640 X 480, 800 x 600, or 1024 X 768 standard computer resolutions. It also accepts 480P or 1080i TV inputs using the VGA port. Many quality TV monitors have a DVI port or component video. These would require some sort of physical adapter to attach to a Mega PC.
So I actually run in 1080i mode most of the time. This makes DVD's and HDTV look really nice. When using the XP computer screen I keep it in 1080i mode but map this to 960 X 540 resolution using PowerStrip. This way I can read the text on the display without it being distorted. However this is pretty low resolution for most web browsers and email programs. So it is kind of cramped... When playing computer games I switch to 1024 X 768 computer mode. The good thing is the on board Nvidia MX440 graphics work just fine to generate all these modes. So I do not have a card in the AGP slot.

MSI Mega Pc-Media Center-Remote:solutions

I bought my Mega 180 on friday and on sunday i was thinking about sending it back but(first i broke sound then lcd display etc. )
I bought it because i wanted to have a "cool looking,small,remote controlled media center and of course computer" but with msi media center III it's just impossible(bad performance,bad program..) aso that's what i did:
1st:girder + plugin for msi cards (fantastic program for remote controller.just learn it how to work with a program that you want to use)then
music:winamp +girder
tv: (watching and recording)-MSIPVS -(i'll find something better this week)
dvd:power dvd (o.k. i'm lazy )
video clips:bestplayer (in polish) +girder
i just cannot imagine to have this computer and not using remote controller.
it takes a while to learn girder how to behave but after you have a fantastic media (and heating ;-) ) center using your prefered programs.
I'm happy again
I'm still working on girder, i'll try to prepare the files for the most popular programs but maybe not today :-) .........
aaaaa girder is shareware 19.90$ but maybe someone knows another program?

A very good program:
Ir2Key: https://forum-en.msi.com/index.php?threadid=49129&sid=
:hypecrite:
Greetings,
Peter Vrenken.

MSI MEGA 180 Media Centre Full Screen Button

I have a MEGA 180 with Media Centre III and was wondering if there was a button on the remote that does full screen instead of having to start the item you wish then trying to navigate to the button and pressing ok?
This is for the sections such as MP3 mode for the visulisations or Video Clip mode for full screen home movies.
I have tried all of the buttons but none of them seem to work.
Any help would be apprecitated
Cheers.

That makes the MCDIII run in full screen, but the video (etc) still runs in a window inside the MCDIII App. The only ways I found were to set the settings to auto maximise the display, or to press the button to the bottom right of the picture. Also I found there was no way of getting back to menu mode without using the keyboard (unless you were prepared to navigate the buttons without seeing them!!!).
This made MCDIII totaly unsuitable as a remote controlled application, and hence I binned it. I now use MediaPortal which works well. Just need to find a better way of getting the DVD filters to work.

Mega 865 Media Center Dejuxe Serial Numbers

Is any one able to supply me with serial numbers for my Media Center on my old 865.
I have lost the disk and had to reload with download drivers.

You'll have to ask MSI: http://support.msi.com

Is there a way that iTunes can act as a Radio Alarm Clock? I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on and start playing that Radio Station from Sleep mode at spec

Is there a way that iTunes can act as a Radio Alarm Clock?
I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on from Sleep mode and start playing that Radio Station at specific times of the day?
Any App or plug-in that does that?
Many thanks
Kevin

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

MEGA 180 Media Centre Product Key

Does anyone know how I can get a product key for MSI Media Centre?
It is a legal copy that I got with the computer in April, but the key is printed on the Paper CD wallet, which I can't find!!!!!
Many thanks in advance,
Themac

the serial key included with the download is:
VBMK844FOLEXHAI
it is in the serial.txt file, so it must be a generic code, like with the MSIPVS, which had the same code printed on every CD. seems a bit pointless to me, as its a free download anyway...

Mega 180 and Media Center III----looks perfect----is it??

I DON'T want to shell out $1000 for cheap HP/Compaq or whatever which includes Media Center Edition
But I DO like the look and features of Microsoft's Media Center Edition.
In the Manual for the MEGA 180-----Media Center III looks perfect for what I want.
Am thinking of a Mega 180 using onboard video, the MSI TV/Tuner Card, onboard SoundStorm---and a cheap Barton. I already have 2 x 512 of NVidia recommended PC2700 RAM for use with the onboard and almost all other parts----but by the time I'm done----I'd be shelling out around $400
The manual makes everything look good "on paper"----but I see from this forum their are "issues".
Did/does MSI support the 651 model well?? Bios updates----utility and driver updates??
This thing looks like a tremendous alternative to a Microsoft Media Center Edition overpriced machine. And I'm willing to do driver updates and Bios updates----heck, I love a challenge----I just don't like a product that lies about what it can really do.
Worth it----or should I pass.....
Thanks-----John

Quote
Originally posted by johnrr6
Did you try the settings button in MC III that says "Enable Fullscreen"
That may not be it----it may just be a TV setting----but it's the only thing I can think if.
Good Luck,
John
I believe that function is only for viewing the videos from the preview window to fullscreen. I don't think it enables/disables "stretch mode" but i'll try that tonight.
if it works i'll post it here. if not ... well .... same thing i guess

How do you make to program the radio station on my remote contol ?

how do you make to program the radio station on my remote contol ?

Programming the radio stations (in hifi-mode) is explained in the "getting started" manual. Be aware of the fact that when you unplug the power cable all memory settings are lost.
JaDi.

Things to Know Before Building Your Mega 180

Some people have asked me for a list of tips so here is my attempt---I'll ask Wonk to sticky it if it turns out OK....
Feel free to PM me with more tips---I'll add as necessary....
TIP SHEET FOR THE MEGA 180:
So you bought that new Mega 180 and the docs leave a lot to be desired......Don't panic!! Take a look at this tip sheet. Should save you a lot of hours!
RAM AND PROCESSOR:
Several things here.....If you are going to use onboard video----you should NOT use higher RAM than PC 2700----waste of money to buy higher as the Nforce2 18G "Crush" was only designed to run no higher than with DDR333 RAM (PC2700). Nvidia warns against it on their site. I have personally experienced a LOT of problems when you try to run the onboard at DDR 400 (PC3200)----trashed Bios in most cases. Also---the 18G and to some extent---"Dual Channel" is picky about memory----try to get a matched pair of DIMMS----and if you REALLY want to be on the safe side----go to Nvidias site and look up the page that lists known, compatable memory with the NForce2 chipsetNforce2 compatable memory. I use A-Data 512 sticks---but they are hard to find.
If you are going to use a Vidcard---then higher memory is just fine----but if you are NOT planning on overclocking-----there is really NO need for higher than PC2700 as the default bus for Barton 2800+ and below is FSB 166 (DDR333---PC 2700).
Alyways run your RAM (Synch) 100%---do not play with dividers if you are using the onboard video. If you have no clue what I just said----you are fine as the defaults will take care of this----this last was for overclockers.
Processor----I like the cost of the Barton 2800+ right now----fast, cheap and even using the onboard and no overclocking----you have a fast machine that can do anything. The 2800+ also leaves the door open for a slight overclock (I have not tried this yet) without too much stress on anything.
LCD PANEL:
Do Not----I say again----Do Not use the "welcome.exe" program----or ANY other program on ANY disk or the MSI website to do ANYTHING to your front panel. That program is for the Mega 651 model and WILL TRASH YOUR LCD. The LCD panel works just fine----it doesn't need any updating.
If this advice is to late, the firmware fix is in here:
https://forum-en.msi.com/index.php?threadid=46355&sid=
Do download and install the latest version of PC Alert MSI Mega 180 Downloads----works great with the front LCD panel and displays PC info nicely.
Use the EQ mode buttons while playing in the HiFi mode----changes the sound a lot and also the display changes------COOL!
OPTICAL DRIVE:
Use an MSI optical drive----basically anything from MSI will work fine---some other drives are reported to work fine like a NEC 2500A----but if you use an MSI drive----you can't go wrong. You might want to put the drive in another machine with a floppy first----and download and update that drive to the latest firmware (most will require a floppy to do that and the Mega 180 has none.)
CABLE MANAGEMENT:
Buy a dollar pack of cable ties and go to work-----make sure ALL cables are away from the front of the intake fan for the CPU----you want a very clear path to the cooler. Less clutter---better airflow. Better airflow----lower temps.
CPU INSTALL:
Get rid of the MSI thermal grease with some Goof Off or acetone-----and get some good Arctic Silver 3, AS5 or AS Ceramique. Clean both the chip top and the bottom of the HS with denatured alcohol before applying the thermal grease. You might also want to lapp the bottom of the HS which is not very well done----but I found it not necessary. The HS/Fan unit is very easy to install----just rotate your screw down points as perscribed by the sticker on the cooler----don't tighten one screw all the way down----then go to the next.
DRIVERS:
I found the drivers on the install disk to be non-functional---- get the latest drivers from the MSI website (you can use Live Update for this) or go to http://www.nforcershq.com and get the latest Nforce2 Driver Remix from Morpheus1 or Mwarhead.
DO NOT use the Nvidia SW IDE driver (say "No" when it asks you in the driver install) Only use the ITB (In The Box) IDE driver----it's the default driver. Your Optical device will probably not function correctly (eject, etc) with the Nvidia SW IDE driver.
Nforce2 SoundStorm Drivers are a tricky topic----there are TONS of versions out there.... I've had the best luck so far with Drivers 4.31 (Off Microsoft Windows Updates---it was a Driver Update) and Audio Control Panel 4.31. Nvidia has a driver update package now JUST for audio-----posted Here
If you are having problems with Media Center III crashing----it seems to be a conflict between the SoundStorm Drivers and Media Center III, Uninstall your Nvidia audio devices in the device manager (Three of them----there is one hidden---so go to view and "show hidden devices") then reboot and let Windows rerecognize your devices and reload drivers. This will solve most problems until Media Center II has another bad crash----in which case---you may have to do this procedure over again. You can tell if it's really hosed up because the radio sound will come on automatically at boot----or you will have lost the SoundStorm Control Panel Icon in the SysTray. I'm working on different versions of SoundStorm to see which works best---will update if I find anything new. (Update)----4.31 seems to be the best but I still can'ttotally eliminate the crashing in Media Center III.
Once you get your Lan device up and running (or your modem) Go to Windows Update and make sure you are completly updated with all latest window updates---If using WinXP-----you need to be at WinXP ServPack 1a when you are done.
Use Windows Cleanup and Defrag when you are done----ESPECIALLY cleanup---to get rid of any left over temp files in the Mega----To get the BEST and most optimised defrag----run windows defrag at least three times in a row----maybe more----it will REALLY optimise the drive.
TV CARD:
The main TV Card designed for the Mega 180 is the MSI 8606-40 Mega TV Card----be careful to get it vice the other version of the MSI 8606 which is the MSI 8606-10 TV@anywhere Master.
The Mega TV Card does not include a Radio while the 8606-10 DOES include a radio. Since your Mega 180 already has a radio----you absolutely don't need or want the 8606-10 TV@anywhere Master.
Do NOT use any drivers or software you receive with the Mega TV Card MSI 8606-40----just set the disks aside. You will ONLY uses the drivers off the Mega 180 Install Disk.
The Mega TV Card MUST be installed before the menu item for "Install TV Tuner Drivers" becomes visible on the Mega 180 install disk.
Make sure your TV Card is hooked into the line called "Remote Control" within the Mega 180 itself----there is a small 3 inch connecting wire in the TV card box.
The TV and Radio function well with the remote----but you must have MSI Media Center III installed. I could not get the TV or the Radio to work without Media Center III.
Upon initial setup of the TV within Media Center III---you may have to switch the source between cable and antenna to get the initial channels to auto scan. Once done auto scanning---switch back to cable as source (assuming you have cable).
Using the remote to force the TV screen to full screen: When you use the up/down arrows on the remote----watch the menu items on the screen----the various menu item buttons will highlight as you hit the arrows.
Once you have highlighted the little arrow button on the lower right of the screen----just below the TV display (it will turn green)----hit the ENTER key
It goes to widescreen----hit the ENTER key again------it goes to fullscreen
BTW, the remote works fine-----the trick is you HAVE to have Media Center III installed and available to be called for it to control the TV Card----Radio Etc. It will start up normally when you push the TV button on the remote.
BIOS SETTINGS:
The defaults will mostly work. One thing----to get BEST performance out of the NForce 2 Onboard video----set AGP to 128 and Set Frame Buffer to 128----I had crashes with almost any other video setting. I'm still playing with PCI clock, voltages, and some other settings to get better stability-----will let you know.....
6 CHANNEL SOUND
Use all three ports in the back of the Mega 180 and then configure it using the SoundStorm Control Panel----Use the "Speaker Setup Wizard". Check and adjust using the "Test Tone" button. I'm using an inexpensive set of Analog Altec Lansing 5.1s----the sound is excellent.
That's all for now----tell me what else you've found and I'll post.
John

My MSI MEGA 180 has a strange display on the monitor.
I opened the boxed removed all items.
Installed the CPU (supported on the CPU compatability list for the MSI MEGA 180), installed the heatsink & fan.
Installed the HD drive.
Installed the MSI DVD+/-RW
Installed 1 DIMM module of DDR RAM PC2700 333MHZ 1GB
Pushed the Power button for the PC and the desplay is corrupted.
I tried the 4 possible configurations for Jumpers 7 and 8 to alter the FSB speed with no luck.
I also tried the 4 different J7 and J8 configurations without having the HDD and DVD-RW drives connected - same result.
I also tried the 4 different J7 and J8 configurations with the Secondary VGA output connected to my monitor.
I also tried the 4 different J7 and J8 configurations with the S-Video output connected to my TV and no signal at all.
Both my monitor and HDD work fine with my other PC.
I noticed the jumper pins are not numbered - made the configuration job a bit more tedious.
Please note the LCD screen works correctly, however the redio tuner in HiFi mode doesn't pick up any local stations.
As I am a Software Test Engineer, I am 100% confident I have checked all possible configurations including clearing the CMOS, but the system simply will not display to the VDU. The POST should at least be visible when Power is turned on for the PC mode.
NOTE: I will update the RAM Brand as soon as I find out the title from the supplier, but I believe it is OEM.
NOTE II: this is the URL to the CPU used: http://www.excaliberpc.com/product_info.php?products_id=1798
PLeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesssss ssssssssssssssssssssssseeeeeeeeeeeeeeee eee help ease my pain!!

How can you modify / customize radio stations like you can with Pandora?

Hi all, I'd like to customize radio stations to add artists, but the only option I'm seeing is to follow artists. Can you customize radio stations in Spotify like you can with Pandora? I didn't find anything on the boards for this. And also, how do you delete radio stations? I'm not finding Spotify to be very intuitive. Thanks in advance!

WBM wrote:
Totally agree...I am on the 30 day premuim trial and will cancel. Why would I pay $10 a month for a piece a softwate that won't let me make basic modifications...like deleting a created radio station that I sdon't like or don't want attatched to my profile anymore. Rookie bull**bleep**. You gotta do better to cmpete.You can always just not listen to that channel; I keep adding new ones all the time. I admit it would me nice to be able to delete radio stations, but there are many other issues that need tackling first. IMHO. You're not paying for the software. The radio feature is secondary to the extensive library.

Mega 180 Radio working under XP Media Center 2005

Hello,
i'm quite fond about Windows XP Media Center 2K5 and would like it to control the Mega 180's radio unit. I would like to know if there are people that have already looked for ways to control the radio. It could be a start to implement some kind of Media Center plugin...
Greetings,
Peter Vrenken

the problem is the fact that the radio tuner isn't a "physical" device that Windows recognises
damn MSI and their proprietory hardware!! surely some sort of USB tuner "hardwired" to the USB controller would have been a better solution? grr, but then how would that have worked in Hi-Fi mode...

MEGA 180 as Media Center (experiences)

I am trying to use my MEGA 180 as a Media Center, i.e. to listen to radio and CD's, to watch TV and DVD's, and to use the HDD to record programs on temporarily to watch later. Plus the TV pause facility. I am using Windows XP home on it, and have all the latest Windows patches. I don't want to have a PC screen atached to it, so the listening needs to be done without turnig the TV on, and the rest without any tiny writing on the screen etc.
HiFi mode works fine for the listening to radio and CD's.
Once I start PC mode, windows boots to the login screen. I would like to boot straight into a Media Center application, missing out this login screen. Any ideas?
I have tried Media Centre Deluxe III, and ShowShifter. Although I much prefer ShowShifter, it has to be ruled out as it does not use the LCD display at all (as far as I know!). Media Center Deluxe III has a lot of functionality missing, and is a little unstable, but it generally does the job. Has anyone had experiences with other packages?
I have found how to give the radio channels proper names (editing a text file with the details called .freq). I can't do the same with the TV channels. Also I haven't found how to remove all the junk TV channels found during the auto-scan. Anyone with any ideas here.
What about a list of remote key functions. I have found quite a few, but I think we could all gain from a documented list of them. They certainly aren't in the manual that I downloaded.
I have noticed that the whole unit powers on sometines when I use the remote for my old video recorder. I have not yet identified the exact cause of this. I also have an infra-red wireless keyboard that may giving it the wakeup indication, but I'm not sure if it was in sleep or power down. The standby mode seems to lock up the box, i.e. it does not power up again properly.
What about getting EPGs and setting the unit up to record TV programs. Can it be set to a no-noise state whilst waiting for the show to start, and then power to that state again when the recording has finished. I have toyed with the boot-up clock in the BIOS, but have not had it working yet.
This could be such a great box given the right software.

Autologon with windows XP
I Use TweakUI to autologin windows xp
you can download it here
Set native resolution to 768x576
I also use TVtool to set the resolution to 768x576 which is the native PAL resolution. This prevents that stuff gets scaled
However, note that MediaCenter III Deluxe doesnt work nicely with it
Many stuff will b offscreen
Remote control
I use Girder for my remote control. It allows me to control all programs using a remote control (unfortunaly not msi's remote control).
TV Guide
Try to see if there's XMLTV support for your country. Many HTPC support XMLTV to show a TVguide

MEGA 180: Media Center deletes radio stations of HiFi Mode

Similar Messages

Maybe you are looking for