Mega 180-----Media Center III and a Vid Card----Working???

I'm trying to narrow down what is causing Media Center III to crash intermittently on my Mega 180.
I think I have it narrowed down to the SoundStorm drivers conflicting with Media Center III
But I want to eliminate that it is a problem with the 18G "Crush" onboard video chipset. I am using the onboard only.
Anybody have a vid card in their AGP slot of the Mega 180 and use Media Center III??
Are you still getting crashes in Media Center III??
John

Finally I give up using the Media Center. I'm using now Girder with Nathans great plug in (see MSI Mega series girder plugin version 1.0 available ). The only disadvantage is that the fancy leds are not working.
Regards
Patrik

Similar Messages

[Mega 180] Media Center III with Hauppauge PVR250

Hi
We have a problem to get the TV card installied in MSI Media Center III deluxe.
The TV card (Hauppauge PVR 250) works very well with the Hauppauge WinTV Software - but there seems to be no way to integrate the tuner card in Media Center.
We proceeded like this:
- We startet MSI Media Center III deluxe und selected Television
- In the Setting the WDM Driver for the Hauppauge Card was selected.
- Here is the First Problem. It is impossible to selecte Cable as source. After selecting "cable" media center switches autmatically to "antenna"
- We pressed the button for automatic programming but it just did nothing.
Do anybody here has the same configuration and got the card working?
Can somebody post us his WinDVR3.prog file (if this is the file for TV programming). Perhaps we can program then television manually.
Thanks for help
Greetings
Patrik
PS: We know that a MSI tuner card is recommended.

Finally I give up using the Media Center. I'm using now Girder with Nathans great plug in (see MSI Mega series girder plugin version 1.0 available ). The only disadvantage is that the fancy leds are not working.
Regards
Patrik

MEGA 180: Media Center deletes radio stations of HiFi Mode

Hello
We have the following problem: Media Center III deletes the radio stations programmed in HiFi Mode!
- I programmed the 6 stations in the HiFi Mode as described in the MSI manual
- Switched to the PC mode and started Media Center III and entered the radio section
- After shouting down the PC and switching to the HiFi mode, the 6 programmed stations are gone away.
The problem only appears when using Media Center. It seems that Media Center deletes the stations when communication with the radio tuner.
Thanks for your help!
Best regards
Patrik

the problem is the fact that the radio tuner isn't a "physical" device that Windows recognises
damn MSI and their proprietory hardware!! surely some sort of USB tuner "hardwired" to the USB controller would have been a better solution? grr, but then how would that have worked in Hi-Fi mode...

Mega 180 and Media Center III----looks perfect----is it??

I DON'T want to shell out $1000 for cheap HP/Compaq or whatever which includes Media Center Edition
But I DO like the look and features of Microsoft's Media Center Edition.
In the Manual for the MEGA 180-----Media Center III looks perfect for what I want.
Am thinking of a Mega 180 using onboard video, the MSI TV/Tuner Card, onboard SoundStorm---and a cheap Barton. I already have 2 x 512 of NVidia recommended PC2700 RAM for use with the onboard and almost all other parts----but by the time I'm done----I'd be shelling out around $400
The manual makes everything look good "on paper"----but I see from this forum their are "issues".
Did/does MSI support the 651 model well?? Bios updates----utility and driver updates??
This thing looks like a tremendous alternative to a Microsoft Media Center Edition overpriced machine. And I'm willing to do driver updates and Bios updates----heck, I love a challenge----I just don't like a product that lies about what it can really do.
Worth it----or should I pass.....
Thanks-----John

Quote
Originally posted by johnrr6
Did you try the settings button in MC III that says "Enable Fullscreen"
That may not be it----it may just be a TV setting----but it's the only thing I can think if.
Good Luck,
John
I believe that function is only for viewing the videos from the preview window to fullscreen. I don't think it enables/disables "stretch mode" but i'll try that tonight.
if it works i'll post it here. if not ... well .... same thing i guess

Msi mega 180. serial for media center III?

Just bought a mega 180.
Where do I find the serial for media center III software?
Couldn't see anything in the manual.
Thanks
Simon

Either its on the CD-cover or on the thing the CD comes in. Clear enough?

Media Center III / Mega 180

I finally found Media Center III.
Why oh why did MSI hide this beatiful application under utillity/home theater ?
I mean that app should have been a install option during autoplay.
This is beyond my understanding.
Anyway, i just love it, it fully integrates everything, really sweet stuff.
But i have one problem, where do i delete / rename TV channels
found during autoscan ??
I havent found any help files at all regarding this application.
Is there a help file ? The help button inside MCIII doesnt work.
In the manual for the 180, there is a helpfile in the programs menu, but i dont
have it...
Dst

Quote
I havent found any help files at all regarding this application.
i just looked on intervideo's website in their support section for Home Theater (Media Centre III) and this was all i found:
http://www.intervideo.com/jsp/Faq.jsp?product=Home_Theater
makes MSI support look helpful!

MSI 180 - Problems with Media center III

Hey,
I have a problem with the Media Center III. When I want to watch TV I have to make a automatic scan in both Cable and Antenna. It seems that nearly all of my channels are found under the Antenna scan (strange I have Cable).
Well my problem is that eventhough I set the TV source to Antenna every time the Media center III software have been shut down I have to go into TV -> settings -> change the TV source from Antenna to Cable and back to Antenna to get the channels.
Anyone had the same problem.
Please help, how do I get the software to remember the settings......
best regards
K. Brinkmann

<FONT face=Helv size=2>
Some of the Jet and MDAC files of your operating system may be corrupted. Use a MDAC repair tool from
http://www.macropool.com/en/download/mdac.html
The above tool has fixed the problem of MediaSource's corrupted database problem for many users. You may want to try it.

MSI Mega Pc-Media Center-Remote:solutions

I bought my Mega 180 on friday and on sunday i was thinking about sending it back but(first i broke sound then lcd display etc. )
I bought it because i wanted to have a "cool looking,small,remote controlled media center and of course computer" but with msi media center III it's just impossible(bad performance,bad program..) aso that's what i did:
1st:girder + plugin for msi cards (fantastic program for remote controller.just learn it how to work with a program that you want to use)then
music:winamp +girder
tv: (watching and recording)-MSIPVS -(i'll find something better this week)
dvd:power dvd (o.k. i'm lazy )
video clips:bestplayer (in polish) +girder
i just cannot imagine to have this computer and not using remote controller.
it takes a while to learn girder how to behave but after you have a fantastic media (and heating ;-) ) center using your prefered programs.
I'm happy again
I'm still working on girder, i'll try to prepare the files for the most popular programs but maybe not today :-) .........
aaaaa girder is shareware 19.90$ but maybe someone knows another program?

A very good program:
Ir2Key: https://forum-en.msi.com/index.php?threadid=49129&sid=
:hypecrite:
Greetings,
Peter Vrenken.

Mega 180/Media Player/Graphic Card/TV-Out

Hi,
after very long research I decided to use Mega 180 as a dedicated PC for media center purpose and to connect it directly to my TV (Siemens 100 Hz real flat 16:9) and to upgrade my second PC and to connect the two PCs wirelesly and to use Media Portal software.
And then I have started to read related posts and forums. But this time I learned that there are new issues I have to deal with.
1. TV-out: The TV-Out of Mega 180 is not good enough on a TV. My question is do I have to buy another powerful graphic card? I need recommendation. My TV has composite and scart inputs.
2. Media Portal: This software has lack of some features. If I use MCE 2005, will it be better?
3. If I use a video converter, will it help me to find better picture on my TV?
Yes bodies, unfortunately there is no way to find the best solution. And I am at the final stage. If this solution does not run, I will give up. I need your recommendations.

This is copied from another reply I made today. The Mega 180 can drive a TV just fine. But you need to spend alot of time making it work.
How you hook up to your TV depends on your available TV connections and your quality standard. The Mega 180 does have an SVideo output. I don't use this however. I have a VGA input port on my 42 inch plasma monitor. It accepts VGA 640 X 480, 800 x 600, or 1024 X 768 standard computer resolutions. It also accepts 480P or 1080i TV inputs using the VGA port. Many quality TV monitors have a DVI port or component video. These would require some sort of physical adapter to attach to a Mega PC.
So I actually run in 1080i mode most of the time. This makes DVD's and HDTV look really nice. When using the XP computer screen I keep it in 1080i mode but map this to 960 X 540 resolution using PowerStrip. This way I can read the text on the display without it being distorted. However this is pretty low resolution for most web browsers and email programs. So it is kind of cramped... When playing computer games I switch to 1024 X 768 computer mode. The good thing is the on board Nvidia MX440 graphics work just fine to generate all these modes. So I do not have a card in the AGP slot.

865 - Remote works in HiFi but not w/ Media Center III. Girder??

First of all, kudos to all of you for supporting each other in getting the MEGA to operate as intended. I have a couple questions maybe you can help me with:
Does anyone know of a quick fix for re-associating the bundled remote with Media Center III? Mine worked initially, but when I loaded the drivers for the remote bundled with my MSI Personal Cinema FX-5200 card it stopped operating in Media Center III. The remote works in HiFi mode without a hitch, but not at all in PC mode.
Also, can the Girder software be used to program other remotes controls, like the one that came with my Personal Cinema card (NVidia remote, USB interface)? It is a much better remote than the MSI remote and would be a great replacement. I looked in the plug-ins on the girder website an could not find any related to the Personal Cinema product.
thanks for your help!!

Akumaisme,
I don't know about an independent karaoke function, but MSI has included a separate program for the radio part on the drivers disc: MSI Radio. Installing this program enables you to use the same functions of the radio in PC-mode as you can in Hifi-mode, without the need to install MCIII.
As far as Girder is concerned, maybe this will explain things: Girder is used to "catch" the commands (button strokes) from your remote receiver and (if neccessary) divert them to other programs. For this you need two things: a working pair of remote and receiver, and a Girder plugin that is written for the specific type of receiver.
So should you choose to be able to use the MSI remote (which I believe is not the case) with other programs than MCIII, you need the Girder plugin written by Nathan (see Sticky at the top of this forum).
I think you want to use the second option: a different (third party) remote. First of all, you most likely won't be able to use this remote with the built-in MEGA receiver. You'll need the receiver of your Personal Cinema card. Then you'll have to take a look at the Girder site / forum whether there is a plugin available for this Personal Cinema card, good chance there is. After installation, you then only need to configure Girder with the proper plugin AND need to learn it to divert the button strokes of your Personal Cinema remote to the MCIII application.
I hope you'll find this information useful.
Greetz,
JaDi.

MSI MEGA 180 Media Centre Full Screen Button

I have a MEGA 180 with Media Centre III and was wondering if there was a button on the remote that does full screen instead of having to start the item you wish then trying to navigate to the button and pressing ok?
This is for the sections such as MP3 mode for the visulisations or Video Clip mode for full screen home movies.
I have tried all of the buttons but none of them seem to work.
Any help would be apprecitated
Cheers.

That makes the MCDIII run in full screen, but the video (etc) still runs in a window inside the MCDIII App. The only ways I found were to set the settings to auto maximise the display, or to press the button to the bottom right of the picture. Also I found there was no way of getting back to menu mode without using the keyboard (unless you were prepared to navigate the buttons without seeing them!!!).
This made MCDIII totaly unsuitable as a remote controlled application, and hence I binned it. I now use MediaPortal which works well. Just need to find a better way of getting the DVD filters to work.

MSI Media Center III

I just read that the MSI Media Center III os bundled with the Mega180 Barebone.
Has anyone informations about this software? Is it better than the MSI Media Center II and can it be used with a Mega651 Barebone?
thx

Check out this website for some very interesting things.......
http://www.sffpc.nl/xoops/modules/phpwiki/index.php?pagename=Unofficial_MSI_MEGA_PC_180_FAQ

Media Centre III and Hauppauge nova-t

Hi,
I realise that the manual for media centre III sais digital tv cards not supported but does anyone know if they ever will be an update so they are supported. Its a shame as I think the media centre III (mega 180) is a great program.

Quote
Originally posted by stelph
Does the XboxMediaCentre just work on the MEGA 180 or does it also work on the 651? Would be great if it does, very useful....
The PC version is now called OMP [Open Media Portal] Its meant for any current windows platform, [double check the specs] but many have been testing it with XP Pro/Home with good success. Remember, very early beta!!!!
Probably dependant on your Tuner Card, etc......

How to play IFO files in MSI Media Center III?

Read the topic. We all can play avi, mpg, mpeg and other file types, but is there a way to play DVD files from a HD? MSI Media Center III recognizes the VOB's as separate files, not as w whole movie. I see no IFO support in MSI Media Center III, or maybe I'm wrong... Anybody know how to solve this issue?
Kiero

Quote from: cosmosk on 05-April-05, 22:29:47
I don't use MSI's MC application so I can't directly answer your question.
However both Win DVD 6 and PowerDVD6 play them just fine by launching the ts.ifo file.
Yes, I know that, but that means that I should use at least two applications. I need only one front end to launch all my media files, inluding ripped DVD files, not as separate VOBs but as whole movies decribed in IFO files.
Kiero

[Mega PC 180 Deluxe] Media Center III shows widescreen AVI in stretched fullscreen

Hey Guys,
I need some advice. I have Media Center Deluxe III running on my Mega PC 180 Deluxe and it works just fine... except for one titty bitty thingy:
All my DiVX widescreen films are stretched into fullscreen mode. Ergo, all of the film is stretched (long heads and stuff...)
How can this be prevented or solved, because it really is annoying.
Plz Help me with this!

Quote
Originally posted by johnrr6
Did you try the settings button in MC III that says "Enable Fullscreen"
That may not be it----it may just be a TV setting----but it's the only thing I can think if.
Good Luck,
John
I believe that function is only for viewing the videos from the preview window to fullscreen. I don't think it enables/disables "stretch mode" but i'll try that tonight.
if it works i'll post it here. if not ... well .... same thing i guess

Mega 180-----Media Center III and a Vid Card----Working???

Similar Messages

Maybe you are looking for