MEGA 180 Wireless Card Cannot Run - No Resources

Well, I FINALLY got the MEGA 180 to recognize the built-in wireless card, but the card will not run becuase the system is telling me that there are no available resources for the card... huh?
Does anyone know what this means and how I can get my built-in wireless working? I currently have an external USB wireless adapter working, but I'd really like to remove it and try the built-in one.
Thanks,
Matt

Nice little update to report.
When I had my MEGA 180 open to lap the heatsink and reapply the Arctic Silver, I decided to check the Mini-PCI card to make sure everything was ok. Sure enough, it was not fully seated in the socket. This would explain why my wireless card would never work.
I pushed it in firmly, and when the system started back up, voila! I had built-in wireless.
Horrible quality control out of MSI to let a system go from the factory like this, but I'm glad it was something small.

Similar Messages

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

"couldn't access airport! wireless sleep cannot run" dialog upon login

Hi
Ever since I upgraded to Snow Leopard, upon logging in, I'm getting the following dialog box with an OK button:
"couldn't access airport! wireless sleep cannot run"
Afterward pressing OK, wireless works fine, but its annoying and indicative that something didn't go right during the installation.
Any ideas?
Thanks
Stewart
Message was edited by: Stewart Hector1

Ah.. "Wireless sleeper" is a third party app ... I was trying to fix my Macbook Pro sleep problem - my Macbook Pro won't sleep automatically.
Anyway, the cause of this problem is solved.

0x800713CF: The owner node cannot run this resource (SQL)

I have SQL 2012 SP2 service on 2 FC nodes of 2012 R2 servers. Everything were working fine about a year, but now my first Node got mixed up with updates and it is offline now. Problem is, that second Node cannot start SQL services By its own.
I checked/tried:
- I checked, that other services related to SQL are online.
- I chenged Node´s ownership to SQL service
- Cluster name has full Access rights to OU where all Computer record of this service are in place
The error I get:
0x800713cf:The cluster resource cannot be brought online. The owner node cannot run this resource.

Thank you both. I´m not sure, how to to check the workload. In FC graphical GUI, both nodes are memebers in owner group, same Place where the owner order can be changed or owner can be disabled. I gone through entire FC management snap-in
and didn´t find any other places or settings to go through. The article kb313882 Umesh refers, is for Server 2008, and I have 2012 R2. Command
cluster res <var> name of resource</var> /listowners is not supported (there is no such command). I got first node up and running, and then SQL services were ON again, but if I shutdown first Node, SQL services will go down
and won´t come up. Disk storage are online and SP level matches.
Please could you guide me step By step, how to check ownership in 2012 R2?

Mega 180 TV Card---the straight scoop...

There seems to be a lot of confusion as to what TV card and what TV card drivers work well in the Mega 180.
After a whole bunch of trial and error----here's what seems to be the scoop. the dope, the real deal----to the best of my knowledge.....
---there is a mixup with TV Tuner Cards----two versions of the 8606 card
8606-10---Regular card----with an FM tuner---not really made for the MEGA----and....
8606-40 MEGA TV card----without the tuner (cuz your Mega already has one) and made especially for the MEGA
Further confusion:
If you have a Mega 180------ONLY use the TV Tuner drivers on the Mega 180 Install disk----NOT the regular drivers that are included with the MEGA TV card as this card will also work on the older Mega 651's and those drivers are basically for it.
In other words---DON'T use the Win Cinema Install disk that comes with the Mega TV Card if you have the Mega 180...
AND---guess what----those TV card drivers on the Mega 180 install disk only become visible in the main install menu when you have the card installed----they don't automatically appear so you know you need to use THOSE drivers vice the ones included with the card.
AND---the drivers only seem to work in conjunction with Media Center III!
It would be nice if MSI put out a little help sheet with some of this info....
Help----and a good manual-----what a concept......
John

Quote
Originally posted by Blmcg
Make sure nothing else is running in the background while you do this, and ensure you have ALL the updates for your mega machine eg: Chipset etc. and try again.
I terminated everything I could via task manager and Media Center III still crashed. I'm pretty sure I have all available updates.
Quote
Originally posted by Stu Online
what drive is your system installed to?
if windows has been installed to the F: drive (with card readers taking C: and D:) then intervideo software will not work correctly
It's installed to C: with the card readers on E: and F: Also, not only is the intervideo software not working but also Media Center III. If I can get Media Center III stable I'd be satisfied.
I've also tried removing the Radeon 9200SE but that didn't resolve the problem. Next I suppose I'll try some other capture/viewing software to see if it runs stable. Thanks for the help so far.

T430 with Intel Ultimate-N 6300 wireless card cannot see 5Ghz network

I have two machines with the exact same Intel 6300 AGN wireless cards. Both running Widowns 7 64-bit. Both have same versions of Intel drivers installed. The X230 sees and connects to my 5Ghz wireless network. The T430 sees only the 2.4Ghz network. The 5Ghz network is not even displayed in its list of available networks.
The T430 sees other 5Ghz networks in the neighborhood. Using inSSIDer I can see that the wifi card is functioning on the 5Ghz frequency as it displays 3 other nearby networks. But I have no way to test connection since those are not my networks and are secured (as is mine).
Windows also shows those neighboring 5Ghz networks in the list of available connections. Only my own 5Ghz network is absent from both lists.
Both my 2.4 and 5Ghz bands are broadcasing their SSID's. All MAC filtering is correct and both machines are allowed on the networks. The WPA keys are correct.
I have even copied the network settings from the working X230 using the "Copy this network profile to a USB flash drive" option from the wireless network properties window and added the 5Ghz network to the T430 using the USB key. So I know the settings are identical.
I ran Lenovo diagnostics Wireless Quick Test on both machines and got identical successfull results.
The only thing amusing about this issue is that the X230 wifi card was purchased from an eBay seller in China and that is the one that works. The card in T430 came with the laptop direct from Lenovo and that one has trouble. Both cards have Lenovo FRU numbers and clearly are whitelist approved since they both work. Just that the T430 card only sees the 2.4Ghz network.
I have assigned static IP addresses to both machines on the network.
I have rebooted the router.
I have run all Lenovo and Windows updates on both machines.
If anyone has further suggestions I woul really appreciate assistance.
Thank you.
Any suggestions would be appreciated.
.NET Software Developer
ThinkPad T440s (20AQ005TUS) | ThinkPad ThinkPad T430 (2342CTO) | Lenovo H430 (25582AU) | ThinkPad X230 (2306CTO)
Solved!
Go to Solution.

Thanks for posting your update. Glad your issue is resolved.
Please consider marking your own post as the solution as it may help other members of the community.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Ath9k wireless card "Cannot assign requested address"

# ip link set wlan0 up
RTNETLINK answers: Cannot assign requested address
#ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> ntu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope list lo
2: wlan0 <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 01:08:ca:e6:bc:76 brd ff:ff:ff:ff:ff:ff
#iwconfig
lo no wireless extensions
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated TX-Power-0dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Please do excuse if there's a silly typo somewhere in those; not knowing how to do it any better, I've simply re-typed the terminal output into this computer, so I can't promise it free of mistakes. (There's got to be a better way to do that, right?
Asus UX31E-DH72 Zenbook
clean install of the 2011.08.19-core-x86_64 release
There is no ethernet port; only WiFi and a ASIX AX88772B USB-to-ethernet that shipped with the system. (no optical drive either; but that's not really relevant to this)
My current system has never been on the internet (well, since I wiped the Windows off of it...), and so I haven't been able to pacman properly. When I try to use makepkg, it claims it's missing a dependency on Linux-Headers. However, I do know that the wireless card works, seeing as how it had been working just fine under Windows.
If it's relevant: during install, I left the NETWORKING section of rc.conf blank (as the Beginner's Guide says to do for DHCP), like so:
HOSTNAME="zen"
interface=wlan0
address=
netmask=
broadcast=
gateway=
#NETWORKS=(main)
Disclaimer: I'm rather new to the forums here and entirely new to Arch (which is my first Linux distro after years of OSX and a few weeks of Windows). Not scared of the command-line, but you may have to spell things out. Also, I understand if you'd rather not spend time explaining yourself, but I'm a strong believer in teach-a-man-to-fish, so if you'd like to explain rather than just walk through, it'd be much appreciated. Thanks!

Welcome and congrats on your decision to grace your sleek new laptop with an equally sleek OS :-)
Just in case you have not found that yet: there is actually a wiki page on your notebook for later setup specifics: https://wiki.archlinux.org/index.php/Asus_Zenbook_UX31E
BTW: I just read there that the usb ethernet is supported in later/newer kernels out-the-box (if setting up wifi really does fail, you can get a later ISO maybe and use that for starters).
As I understand your current setup state, you have installed the system with the core August release and it boots fine? Please confirm.
Also please confirm the exact wifi card the notebook has:
lspci -nn | grep net
or
lspci -nn >> ryebookpcidevices.txt
The later pipes the output to a file. Doing the command again, appends to the file. We only need the exact PCI ID of the wifi card to double check. To save typing even that ID you can maybe copy the file you created "ryebookpcidevices.txt" to an usb stick, if that automounts under /media/...
Next, please quote here any errors you get when re-loading the ath9k module (all commands below need root/sudo):
rmmod ath9k
modprobe ath9k
If you get errors, check whether
rfkill list
gives valid output (not sure if that package is on the ISO, i doubt it actually).
If modprobe does without error, please retry your trial to connect with the card by directly issuing
iwlist wlan0 scan
Give us feedback on what happens then. If there is an error, try
ip link set down
and start from step 0 in the wireless wiki: https://wiki.archlinux.org/index.php/Wi … nual_setup
Your output says "Mode:managed", so something seems working there already..
For "makepkg" you indeed need the headers, but you dont say what you want to compile at this stage.

MEGA 180 Wireless LAN

Has anyone got the wireless LAN to work? You shouldn't need an anntena as it's mounted behind the front bezel. WinXP recognizes it but no matter what I do I can't activate it. My customer wants to connect to her wireless router. Arrg! This machine is driving me crazy!!!

It should not be a problem at all, but make sure you have a pair of tweezers at hand for reconnecting the antenna cables. I use the Realtek drivers from: http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=2002111&famid=2002111&series=2002121&Software=True
This site also contains drivers for Linux, perhaps they will work?
With these drivers it is also possible to let the Mega 180 act as an Access Point (WinXP).
JaDi

MSI MEGA 180 Deluxe - Card Reader

Does anyone have any advice on getting the card reader to work?
It was working untill I installed all the software from the install disk. Then I rebooted and it had stopped working.
I have since done a complete fresh install, but still have the same problem.
Not really conversant with BIOS settings, so don't know what they should be.
Have installed all updates for the Mega 180 from MSI website, and also have ALL updates from microsoft. (All 110MB !!!!! Thanks god for broadband!!)
Any help would be greatly appreciated.

Go to bios, and check in Itegrated Pripherals->Onboard Devices->OnChip USB.
This must be enabled. I have there V1.1+V2.0, and cardreader is working.
I was disabled this, when i installed WinXP, because cardreader start from drive C: and my HDD was like drive F:. So I disabled it, installed WinXP, and then enabled OnChip USB. Now i have A: (virtual drive) C: (Hard Drive) E: (DVD/CD-RW) F: and G: (CardReader).
Best Regards from Czech

E61i cannot run apps after restart

i'm in dispair...
everytime i restart my phone most apps that I installed in MicroSD mem card cannot run...the icon is there but nothing happen when clik at them..
some of them got no problem at all.
but when I take out my memcard & put it back everything come to normal...weird isnt it
anybody have solution for this?
thanks in advance

i'm not alone....
http://discussion.forum.nokia.com/forum/showthread.php?t=89725

Mega 180/Media Player/Graphic Card/TV-Out

Hi,
after very long research I decided to use Mega 180 as a dedicated PC for media center purpose and to connect it directly to my TV (Siemens 100 Hz real flat 16:9) and to upgrade my second PC and to connect the two PCs wirelesly and to use Media Portal software.
And then I have started to read related posts and forums. But this time I learned that there are new issues I have to deal with.
1. TV-out: The TV-Out of Mega 180 is not good enough on a TV. My question is do I have to buy another powerful graphic card? I need recommendation. My TV has composite and scart inputs.
2. Media Portal: This software has lack of some features. If I use MCE 2005, will it be better?
3. If I use a video converter, will it help me to find better picture on my TV?
Yes bodies, unfortunately there is no way to find the best solution. And I am at the final stage. If this solution does not run, I will give up. I need your recommendations.

This is copied from another reply I made today. The Mega 180 can drive a TV just fine. But you need to spend alot of time making it work.
How you hook up to your TV depends on your available TV connections and your quality standard. The Mega 180 does have an SVideo output. I don't use this however. I have a VGA input port on my 42 inch plasma monitor. It accepts VGA 640 X 480, 800 x 600, or 1024 X 768 standard computer resolutions. It also accepts 480P or 1080i TV inputs using the VGA port. Many quality TV monitors have a DVI port or component video. These would require some sort of physical adapter to attach to a Mega PC.
So I actually run in 1080i mode most of the time. This makes DVD's and HDTV look really nice. When using the XP computer screen I keep it in 1080i mode but map this to 960 X 540 resolution using PowerStrip. This way I can read the text on the display without it being distorted. However this is pretty low resolution for most web browsers and email programs. So it is kind of cramped... When playing computer games I switch to 1024 X 768 computer mode. The good thing is the on board Nvidia MX440 graphics work just fine to generate all these modes. So I do not have a card in the AGP slot.

Mega 180 - Install Video Card or Install Video Driver

I just spent 6 hours at a customer's house trying to fix the Mega 180 I built for her.
As I stated in a previous thread, the machine was working fine and then she experienced the BLACK SCREEN OF DEATH. This is when your machine POSTS, loads Windows and just before Windows starts, the monitor goes dead. Windows still loads and if you remember where icons are on the desktop, you can click them and stuff happens. The monitor just stops getting a signal. However, if you hold down F8 during boot and chose VGA mode, you can use Windows in VGA mode. The monitor being used is a Sony Multiscan200ES.
Once in Windows, if you look under device manager, you'll see a listing of Unknown and under that it lists nVidia GeForce4 MX Integrated CPU.
So, I've tried the following fixes:
1) Uninstalled all chipset & viideo drivers, reboot, reinstall chipset drivers, reboot, reinstall video driver, reboot. BLACK SCREEN OF DEATH.
2) Uninstall video driver, reboot. Windows starts under the generic driver. I install the video driver, reboot, BLACK SCREEN OF DEATH.
3) Figuring there had to be an easier solution to this problem, I installed an ATI Radeon 8500 card that I had laying around (I know this card works) figuring that I'll just sidestep the whole video driver issue by not using the onboard video. Things just aren't that easy because after I installed the card the machine won't even POST. It turns on but nothing happens. ARRRR!!! I try reseating the card, nope - nothing. I take the card out and use the onboard graphics to make sure everything is ok in BIOS. I read that if the BIOS detects an AGP card it will automatically disable the onboard graphics but it doesn't seem like that's happening. So I look around BIOS and there is no way to disable the onboard graphics. I have it set to boot AGP first, etc. and nothing works.
I guess the last thing I can do is reformat the drive, reinstall windows, and reinstall everything else. But I don't want to do this because the machine is all set up, been used for a while, and it takes so long to reinstall everything.
My question is this. How can I either reinstall the video driver so it works or how can I install a video card so it works? Ideas???

Quote
I'm going to hunt over at nVidia's website to see if they have a cleaner utility (ATI does for its Radeon drivers - rids the system of every last trace).
nVidia don't need a cleaner utility cos their software is better written!
stab in the dark - the vga lead is connected to PRIMARY vga port?
go to add/remove programs and Remove "Nvidia Display Driver" in Safe mode
restart your computer and it should boot into VGA mode, and prompt with Found New Hardware. cancel this.
the nvidia software will leave the install stuff on your computer, usually in C:\NVIDIA. browse to here and find and run the setup.exe to reinstall the software.
if its been working before, then its probably not a memory issue - it might also be worth making sure the latest nforce drivers (3.13) are installed too.
oh and customers usually WON'T admit to messing around to stuff they shouldn't - in my experience anyway!!

Advice needed for buying an AGP card for MEGA 180

Since 1 year I have a MEGA 180 with a SEMPRON 2500 processor, 512 MB DDR RAM, Lite-On DVD-R/W, Hauppauge PVR-150 running MediaPortal 2.0.0.0.-RC4 and it rocks!
I am not so happy though about the TV-output of the integrated GF4MX that came with the nForce2 chipset. I would like to disable this and insert a low profile, passive cooled nVidia-6200 with 128 MB-DDR. I am a bit worried about the power requirements of the card and the juice that the power supply (200W ) can deliver. Is it safe to use this card or should I adjust my demands? I am using the system for media purposes only, e.g. recording and watching recorded TV, watching movies and playing music. MediaPortal requires a DirectX-9 compliant card, DirectX-8 also works but with video artefacts. Gaming is no requirement.
Can anyone please advice what to do ???
Thanks in advance, Leo

Quote from: johnsaunders18 on 21-December-06, 06:08:32
get a nvidea 6200 they are fine, on a mega, i have built 3 machines based on teh mega 651 and they are all fine
hope this helps
john
Now that's what I call a quick answer
Thanks, John.

ATI radeon card on mega 180

Is anyone using a radeon card with the mega 180 ?
Which model would fit ?
I was thinking about the sapphire 9600 xt ultimate edition
since it has passive cooling, but the cooler seems a bit big at the back of the card ?
AND does the ati TV out work better than the nvidia tv out ?
Is it possible to finetune the height /width of the picture ?
Please post any model of ATI that will fit.
I'm tired of this piece of nvidia onboard card.
Dst

I don't have a 180, I have an 865 that has an ATI Radeon card. Works great with my Mega 865, but it's one huge beast.
It took up the AGP slot, and both PCIs. I don't suggest getting this card unless you are willing to make some modifications to it straight out of the box.
HIS ATI Radeon Excalibur 9800 Pro IceQ

Mega 180 card reader / sony duo 2gb card

Hi, can any one help? I am unable to get my Sony 2gb duo cad recognised by the mega 180 card reader, I have tried the live update option and reinstalled the drivers but to no avail, can any one point me in the ricght direction.
With a laptop I have I had to update the driver to get the card reader to recognise the lager size memory card. but have seached and searched for one for this card reader but no luck so far can anyone help please?

Hi
Thanks for this, I have been using a memory stick Duo adaptor, so in appearace it looks and acts like a conventional memory stick, in my other equipment
I have also tried using a 512mb Duo card and that also will not recognise, I have a SD card that goes into the same front slot and the 180 reads that one OK.
It is frustrating as the main reason for purchasing the 180 was to use the card reader to exchange info.
Is it possible that another reader will fit behind the panel?
Thank-you

Proj cannot run on LCDS 2.6 ES due to "Unable to resolve resource bundle "datamanagement" for locale "en_US"

hi, all,
We have developped an application on Flex Build 3 (run
successfully), but failed when we try to deploy it on Tomcat with
LCDS 2.5 ES because some components cannot be resolved correctly on
LCDS 2.5. We then downloaded a 2.6 ES Beta 2, but still cannot run
the application, the error msg is "Unable to resolve resource
bundle "datamanagement" for locale "en_US".
anyone knows how to deploy the application on LCDS 2.6 ES?
Many thanks.

In your WEB-INF/flex/locale/en_US dir there should be a file
called fds_rd.swc. Is that there?

MEGA 180 Wireless Card Cannot Run - No Resources

Similar Messages

Maybe you are looking for