Mega 651 USB devices disappearing after wakeup from Hibernate state - HELP!

Hi All,
I still have this problem where when I wake up my Mega 651 from a hibernate state my USB devices seem to get uplugged or ejected. The usb ejected/unplugged window appears also.
This wasn't too much of a problem, however, my PC is now on a network and when my usb devices are unplugged such as my UPS or shared printer a broadcast message is sent to all network PC's.
I've also started using my card reader as I now have a digital camera, but annoying when the card reader is ejected all the time.
I'm running Windows 2000 SP4 with all updaes.
If anyone can help me solve this problem it would be a great help.  
Also the card reader access light stays on sometimes after shutdown, why is this?
Many thanks,
Mo
MSI Mega 651
P4 2.8GHz 533 FSB
Akasa Expansion Slot Exhaust  Blower
Akasa Pax Mate II in case sound insulation
1Gb Corsair Matched pair DDR RAM
MSI FX5200-VT128 nVidia Personal Cinema
MSI DR16-B DVD writer

Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
Try a different graphics driver
Tweak the driver module parameters or build your own driver.
Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

Similar Messages

  • USB devices disappear after using Apple TV

    When I Option-Click on the Sound icon in my menubar, all of the USB microphone/headset devices show up. It's how I switch from headset to headset.
    However, if I use my Mac to play itunes through my Apple TV, all of those USB devices disappear from the menubar's Sound Icon. And none of them work: sound comes only through my computer speakers.
    Restarting the Mac doesn't fix it. The only fix I've found so far is to completely unplug the Apple TV (to end the wifi signal), and then restart the Mac. This makes all of the USB devices appear again, and are all chooseable.
    Anyone else see this behavior?
    I'm running a "mid 2010" Mac Pro tower, GHz Quad-Core Intel Xeon, and 10.9.1

    I get this all the time w two ATV on the same wifi network.
    First called "Apple TV", the second called "Living Room".
    I see on ipad and iphone "Apple TV (2)" as one individual item. It looks like if finds "Apple TV" then finds the second one, but aggregates it into "Apple TV (2)".
    Randomly, it will sometimes show two seperate ATV links in the airplay options, then revert back to "Apple TV (2)" as one option in airplay.
    Is definitley a bug in airplay software.

  • Usb gone after resume from hibernate (since update?)

    Hello!
    Since a recent update, my wireless usb stick's interface isn't available any more after resume from hibernate. Removing it and connecting it to a different USB port does not help.
    lsusb says, the device itsself is there.
    I can see it being removed / added when I connect it to a different usb port.
    The only interface iwconfig / ifconfig list is "lo" though. No wlan0 available.
    No idea what to try next... any hints?
    thx!
    Last edited by whoops (2012-03-20 06:22:01)

    Have there been issues with updates?
    A while after that, my usb mouse/keyboard stopped working after resume, too.
    Then after a few days, wifi started working...
    Then usb input started working again...
    Now usb input devices stopped working again -.-
    I think there were updates (kernel, too) every time the behaviour changed... not sure though...
    Still no idea what to do.

  • My desktop background disappears after waking from sleep mode

    My desktop backgroung disappears after waking from sleep mode. Just converted to Lion.

    I spoke with Tech Support this morning. Apparently this is a known issue with Lion. I found it interesting that the rep insisted on saying that "it is the way Lion functions" instead of admitting that it is a GLITCH in the programming. He even said that it happens randomly and not on all computers and not all users experience this. That ought to tell you that it's a glitch.  Anyway, there is a "workaround" which is what you do to put a bandage on a persistent wound that should really get surgically stitched:
    You either have to log out every time you leave the laptop, or you have to change Energy saver preference to set the display to go to sleep AFTER the computer is set to log out (in Security preferences).
    Here is the article that instructs us on applying the bandage::
    http://support.apple.com/kb/TS4135?viewlocale=en_US
    Suffice it to say that Apple does not plan on stitching this one up any time soon..

  • Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

    aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

    “Hi Kirby, thanks a lot for your answer.
    I got one answer, from DMoore, saying:
    “Try Safe boot and then restart with only Aperture open.  Still doent work write back with more details like Ram, HD capacity/free space.  Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
    Safe boot   http://support.apple.com/kb/HT1564
    Starting up into Safe Mode does several things:
    1  It forces a directory check of the startup volume.
    2  It loads only required kernel extensions (some of the items in /System/Library/Extensions).
    3  In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
    4  It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
    5  It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
    6  It disables all startup items and login items (Mac OS X v10.4 or later).
    7  Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
    As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
    But I understand your questions, so I’ll try to answer them;
    "loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or  I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
    I can see images in the Browser, so it only happens in the Viewer(s).
    I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers  – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
    Did Aperture work before?
    Yes it worked ok for a while, but I only purchased it on 24th May.
    If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
    So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
    But I have not changed the default Preview settings in Aperture Preferences.
    My macbookpro details:
    2.7 Ghz Intel Core i7
    Memory: 8 Gb 1333 MHz DDR3
    Hard Drive capacity 499.25 GB
    Available 387.36 GB
    I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
    I hope this helps you to understand more.
    Thank you for trying to help me.
    Tony

  • Email disappears after dragging from inbox to subfolder.

    Email disappears after dragging from inbox to subfolder. It is not lost because if it is unread it shows as an unread email in the sub folder. When I set the folder to view # of emails the # of emails shows next to the folder, but the actual emails do not.Also
    if the email that is moved to a subfolder has not been read it will show an unread email in the subfolder but still not be able to view the actual email.
    This does not happen on all subfolders.

    Tried resetting the view on that folder already? You can do this via the View tab.
    Otherwise, you'll have to share more details like at least your version of Outlook and type of email account.
    Robert Sparnaaij
    [MVP-Outlook]
    Outlook guides and more: HowTo-Outlook.com
    Outlook Quick Tips: MSOutlook.info

  • USB devices disappear?

    Help! I'm having a problem with my USB devices disappearing off the desktop, never to be seen again, within a few seconds of plugging them in. Not sure what's going on, but here's a video of it... http://www.youtube.com/watch?v=_OlUel2lXQA
    Any ideas?

    Are you getting any messages associated with the disappearances?
    What kind of devices are affected. If they are exclusively bus-powered storage devices (don't have their own power brick to plug to the wall socket), they may be demand more power than the computer's USB bus can provide.
    The cure for that is to buy a powered (does have a power brick for use in a wall socket) USB hub. The hub only has to worry about powering whatever devices you attach, thus taking a load of the logic board USB ports.

  • Sound Problems After Restore from Hibernate Using uswsusp and pm-utils

    I see mention of using /etc/pm/config.d/module to recycle certain kernel modules during suspend.  Do I need to suspend all modules?
    **** List of PLAYBACK Hardware Devices ****
    card 0: MID [HDA Intel MID], device 0: CS4206 Analog [CS4206 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: MID [HDA Intel MID], device 1: CS4206 Digital [CS4206 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [aj@mbp62 ~]$ lsmod | grep snd
    snd_hda_codec_cirrus 8790 1
    snd_hda_intel 36904 1
    snd_hda_codec 149633 2 snd_hda_intel,snd_hda_codec_cirrus
    snd_hwdep 6340 1 snd_hda_codec
    snd_pcm 77709 2 snd_hda_codec,snd_hda_intel
    snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
    snd_timer 18726 1 snd_pcm
    snd 59173 8 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
    soundcore 5450 1 snd
    [aj@mbp62 ~]$ cat /etc/pm/config.d/module
    SUSPEND_MODULES="bcma b43 snd_hda_intel"
    SLEEP_MODULE=uswsusp
    Any pointers?

    This morning, I rebooted for half an hour without success:
    After resume from hibernate, most of my machine froze like described above.
    After first reboot, it worked for 1 minute, then I had a full freeze (nothing worked... no mouse, no normal keys, no magic keys, screen frozen...)
    After second reboot, my wifi adapter was gone. It showed up in lspci and looked like this:
    04:07.0 Network controller: Atheros Communications Inc. AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] (rev 01)
    Subsystem: Atheros Communications Inc. Device 3071
    Flags: 66MHz, medium devsel, IRQ 22
    Memory at feb70000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: [40] #80 [0000]
    ...but not in ifconfig. I found the following in dmesg:
    [ 7.106070] ath: phy0: address test failed addr: 0x00008000 - wr:0x00080008 != rd:0x00000008
    [ 7.106181] ath: phy0: Unable to initialize hardware; initialization status: -19
    [ 7.106287] ath9k 0000:04:07.0: Failed to initialize device
    Problem persisted over 10 poweroffs/reboots (also hit the "on" button a few times with the pwoer cable disconnected, trying to make it "reset" or something. Did not help this time, might have been coincidence the last time that worked.

  • Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!

    Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!

    Go to System Preferences->General. There you can set how you wamt thescrool bars to behave.
    If you want to see the scrool bars all the time select Always

  • Left USB-Port dead after wake from sleep. Just restart helps.

    I hoped Apples keyboard-Update today would solve my biggest hate-bug in this buggy POS called Leopard. It didn't.
    As usual on my Leopard-Macbook Pro, no device will work on the left USB-Port after I waked the computer from sleep. Just a restart helps. I hoped this update to solve this, because it replaced among others "IOUSBFamily.kext".
    Terminal gives a timeout error for the internal USB-Hub after wake from sleep. I assumed this should be related.
    I'm really angry now.
    When will Apple solve the most urgent problems in Leopard?
    Was 10.5.1 just smoke and mirrors to make (fool people into...) people upgrade who intended to wait until the first maintenance-update?
    Was Leopard Apples attempt to make Windows-Users more comfortable by putting in some heavy extra-bugs and blue screens?
    FIX IT FINALLY! And f... don't wait for Macworld to release 10.5.2. It's desperately needed and the current state of Leopard will leave some people very sad at christmas after getting their first Mac. First impression counts and many more peoples first contact with the Mac will be at christmas...

    Apple knows the problem and for some reason they are stumped on fixing it. this is so bad I can't believe it. On my macbook pro with Leopard installed, USB left port is dead after sleep. Only restarting can power it back up. I have to restart every day to use my external hard drive for time machine or when putting my flash drive in the port.
    Come on already Apple. This is a SERIOUS, SERIOUS problem.
    Fix it.

  • Music and Video Content Disappears After Transfer From itunes

    Hi
    I am experiencing a very strange issue so I hope someone can help or has at least experienced this themselves.
    I have my iphone set up so I manually manage/sync music ans content. For the last 2 weeks everytime I transfer music and video to my iphone it disappears after I eject the device from itunes. When transferring the content this works as expected and I can see the tracks being transferred. If I then go into my music library while the iphone is still connected to my laptop I can see and play music on the iphone.
    As soon as I eject the device (in the recommended way) my iphone music library shows no content what so ever it has vanished. If I then reconnect the iphone to itunes, on the iphone summary screen it seems to show there is content on the iphone as the GB capacity bar is filled up with whatever I have put on their but no content is visible on the iphone.
    Interestingly if I download a podcast or music directly onto the iphone this stays on there.
    This is driving me mental has anybody else experienced this and if so know how to fix it?
    Thanks
    Chris

    I'm having the same issue and haven't found anything on how to fix it other than restoring my phone. Won't be doing that. Hopefully this bumps it back to the top and someone will have an answer.

  • USB Mouse / Keyboard doesn't work after resuming from hibernate

    I am using a USB device that splits out to 2 PS2 ports, one for a mouse, one for a keyboard. It works great, but when I put my X61 into hibernate, the mouse and keyboard do not work when I resume from hibernate.
    I installed all the relevant patches and power manager drivers from the driver downloads page, but my mouse still doesn't work.
    Can someone point me to the correct download or shed some light on this?
    Thank you!

    I have this same problem with this same device. It is a "composite USB device".
    What I've notice is that the problem happens mostly with USB 1.1 ports. When the device is connected to a USB 2.0 port the problem doesn't happen always.
    It depends on the computer though. I added a PCMCIA USB 2.0 adaptor to my laptop that has USB 1.1 only. And when I connect the USB-to-PS/2 cable to the USB 2.0 my mouse sometimes work after suspend/hibernate but sometimes doesn't.
    However, on my other desktop computer, which has integrated USB 2.0 ports, this problem has never happened (I haven't tested it exhaustively though).
    This is a Windows bug of course. Everything related to USB 1.1 support is buggy in Windows. One more example is the annoying (and possibly catastrophic) "Delayed write error" that appears when you use a external hard drive plugged to a USB 1.1 port.
    I guess M$ is focusing their efforts on making USB 2.0 to work well and they have forgotten about USB 1.1. Or it could a problem related to "USB composite devices", hard to know.
    Message Edited by getfree on 02-22-2009 03:19 PM

  • After clicking 'sync wifi', my device disappears after disconnecting

    instructions say to turn on syncing wifi
    then you can disconnect device
    and device is supposed to stay listed
    my device disappears from Device listing

    Aside from what Chris CA suggested, just quit iTunes and then restart and see if the iPad shows up in iTunes.
    @Laxman25 .....I sync and backup all the time without plugging my iPad into a power source. I never auto sync, I always initiate the sync and backup on my own. I don't trust auto syncing or auto backup, but that's just my take on the whole thing.
    The last thing I want to have happen is to leave my device plugged in overnight to charge, leave iTunes running on my computer to sync and back up, come back the next morning, and find out that something disastrous happened while all this auto crap was going on. I would rather take 5 minutes out of my busy day to sync up and backup my iDevices on my own and then maybe I will not have to spend hours sorting out a mess the next day if something went wrong.
    Cynical and untrusting attitude maybe .... But that's just me.

  • Read and write to an USB device without any products from NI

    Hi!
    Is there any possibility to read an USB device and write to it without any NI products?
    I want to measure temperature with several sensors from Dallas (DS18S20).
    I'm using Labview 8.2.
    Thanks for your help.

    Hey, I have never used Dallas sensors but I just used Google and found this which might help you.
    Also here you can find some basics of using USB in LabVIEW. But USB communication is always a bit tricky. Have fun
    LV 2011, Win7

  • USB mouse freezes after wake from sleep.

    Since the 10.8.2 update my Logitech USB mouse freezes after waking up the computer from sleep or when it goes into energy save from non use. This also happens to my brand new MBPR. I tries repair permissions and reset the smc. Any suggestions?

    I get a frozen mouse (Microsoft Intellimouse Optical) on my 2012 Mac Mini running Mavericks (it did it with Mountain Lion also) when waking from sleep about 75% of the time which works again if I unplug/replug it (light is on and mouse buttons work when it's frozen, but the pointer won't move).  It does this whether I use a built-in USB3 port, a USB2 hub and now also with my new USB3 hub. 
    However, my 2008 Macbook Pro also has an Intellimouse connected to it when docked and it NEVER freezes when waking from sleep whether using the built-in USB2 port or a Gmyle USB3 card port.  Either way, the mouse wakes fine and it's the SAME MODEL MOUSE and SAME OSX verison.  I have no idea why the inconsistency.  It ***** because "Wake on Network Activity" FINALLY works right here in Mavericks with XBMC on my Mac Mini so there's a perfect opportunity to save some electricity.  I got excited when it woke up two times in a row with 10.9.1 and set up my sleep controls only to find it wouldn't go to sleep with the Energy Savings menu because I have an external USB3.0 3TB media drive connected (at all times).  I finally found out (through more patient testing) that once the drive spun down (possibly on its own power saving timer as I'm not sure the "Shut down hard drives when possible" setting works in Mavericks; it was messed up in Mountain Lion in 10.8.4 and even though 10.8.5 fixed it, I'm not sure Mavericks is using the same code.  It doesn't seem to shut down any faster with or without the setting on and shuts off several minutes after the computer attempts to go to sleep (on a 1 minute test setting; I think WD defaults to 10 minutes in firmware). 
    Anyway, once that was resolved and I saw it would go to sleep eventually once the drive spun down (it will sleep instantly if I select SLEEP from the Apple menu which I find odd if it's such a big deal that it's connected....), I thought OH BOY!  I'm all set.  Then I woke it from that sleep and found my mouse was frozen again..... :-(  What a PITA to unplug/plug the mouse every time it wakes from sleep.  It's not worth it.  I'll just have to pay the extra few bucks in electricity each month I could have saved to avoid such a freaking nightmare hassle.  Why on God's Green Earth, Apple CANNOT or WILL NOT fix their darn energy savings features is just beyond me.  Instead of spending all their time making horrible horrible ugly icon/GUI updates to iOS and making it slower and slower and slower, why don't they actually fix some darn bugs in OSX for once in their lives.... I'm starting to think I should give Windows another chance I'm so annoyed right now.  But then I think about having to run a malware program and have that program update and Windows software/security updates 3x a day and I think I can just deal with the Mini not sleeping.....
    I'd like to know why Apple couldn't figure out those of us with multiple monitors would want a dock on BOTH monitors all the time either (first side-mount docks wouldn't migrate and now in 10.9.1, bottom-mounted docks won't migrate here either, leaving a dock on one monitor all the time and if that's the monitor that is showing full-screen video, you lost your dock completely while the video is playing.  They finally figured out after a full decade that having a menu bar on both screens would be a good idea, but it just didn't occur to them that the same is true of the dock.  How much are they paying these guys?  Too much apparently (or is it too little to attract talented thinkers? Nah, it couldn't be since we give them feedback and they just ignore it).

Maybe you are looking for