MEGA 865 fan control problems after suspend/hibernate.

I'm seeing the CPU fan control problems, and it's REALLY ANNOYING, as it means I have to leave the machine on all the time. Specifically, after suspending or hibernating the machine, on wakeup the CPU fan goes to full speed and STAYS THERE until I reboot.
This is on a CLEAN INSTALL of Windows XP.
Is there going to be a fix for this from MSI soon? Because it's really ruining the experience of using the MEGA.

Hi guys,
I have builded a Mega 651 attaching a Celeron 2.4 Ghz.
I installed the cooler but I got really scared when I realised that the fan run for 2 secs and then stopped.
Is this normal?
If yes then i am assuming that the voltage of the fan is controlled by a thermal sensor, meaning that the fan goes on when the temperature reaches a certain limit.
Can the threshold temperature be controlled from bios so I can set it to minimum possible?
thanks in advance

Similar Messages

  • MEGA 865 Fan Control Problems using suspend/hibernate

    I'm still having problems with the MEGA 865 CPU fan speed going to MAX after I come back from suspend or hibernate until a reboot of the system.
    This is super annoying.
    MSI tech support sent me a BIOS they thought might solve the problem... but it's OLDER than the one on the web site, PLUS it doesn't fix the problem  
    When will MSI look into this problem? When will a real fix be available? :(

    MSI sent me an updated 1.1 BIOS which actually fixes this problem. Unfortunately when I now resume from hibernate or standby the computer is so slow I have to reboot it - sort of defeats the point don't you think!
    As for a response from Tech support. Well I might aswell get some

  • Mega 865 Fan Control after standby

    Hi,
    With the Mega 865 Bios in S3 mode, I am noticing that when XP SP1 resumes from Standby or Hibernate mode the fan stays on full power. Is anyone else noticing such a problem?

    it would appear to be from the other thread i have read.

  • P67A-G45 Fan Control Problem After BIOS Update

    My old BIOS version was 1.8. I could control my fans in BIOS(50-75-100% RPM). Also SpeedFan tool was working perfectly, I could change fan speeds freely.
    I just installed MSI Live Update and tool updated my BIOS version to 1.E(CPU-Z says v1.14) without any problem. But when I entered BIOS/Hardware Monitor I saw that fan control is disabled. Both sys fan 1 and sys fan 2 are stuck in %65. SpeedFan doesn't working too.
    CPU Smart Fan is okay, works fine but system fans are uncontrollable now.
    My Hardware;
    i5 2500k
    MSI P67A-G45
    G-Skill 1333MHz 2x2GB DDR3
    Samsung 502HJ
    HAF 912+ with 2x120mm fans 2x200mm fans
    Sapphire Pure 625W

    Flash back to the BIOS that worked for you and report your findings to MSI technical. >>How to contact MSI.<<
    Use the forum flasher in the future. Its safer. >>Use the MSI HQ Forum USB flasher<<

  • Mega 865 - HiFi Button problems !

    Mega 865 - HiFi Button problems.
    Hi,
    I recently had some problems with the LCD display on the 865 and after
    following the very technical (wiggle the power cable) instructions, i got
    the LCD display working again, but now my HiFi button doesn't work
    has anyone experienced this before ??
    The radio/lcd display works fine in media centre
    cheers.

    I refer to this post https://forum-en.msi.com/index.php?threadid=66148
    I did this and the LCD display came back on again but now the hifi button doen't work

  • Fan Control fails after resume from pm-suspend

    Hi,
    i recently upgraded to 2.6.37 (on a hp nx6325 laptop) and noticed the following behaviour after a resume from pm-suspend:
    The fan control stops working until cpu reaches a temperature of 60°. As soon as the temperatur passes this threshold the fan starts rotating at max. speed. Below 60°, the fan is turned off immediately.
    pm-suspend.log:
    disabled, not active
    /usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Don Feb 3 09:16:21 CET 2011: Finished.
    Any ideas where to look for the problem?

    I have the same problem with   2.6.37.1-1: suspend do not work.
    The sceen goes blank then returns to X. The log shows the followings:
    Feb 21 15:50:33 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
    Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Synchronizing SCSI cache
    Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Stopping disk
    Feb 21 15:50:33 localhost kernel: tpm_tis 00:03: Operation Timed out
    Feb 21 15:50:33 localhost kernel: legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
    Feb 21 15:50:33 localhost kernel: PM: Device 00:03 failed to suspend: error -62
    Feb 21 15:50:33 localhost kernel: PM: Some devices failed to suspend
    Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Starting disk
    Feb 21 15:50:33 localhost kernel: b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
    Feb 21 15:50:33 localhost kernel: ------------[ cut here ]------------
    Feb 21 15:50:33 localhost kernel: WARNING: at drivers/base/power/main.c:106 device_pm_add+0xb6/0xc0()
    Feb 21 15:50:33 localhost kernel: Hardware name: HP Compaq 6715b (GB835EA#AKC)
    Feb 21 15:50:33 localhost kernel: Device: misc
    Feb 21 15:50:33 localhost kernel: Parentless device registered during a PM transaction
    Feb 21 15:50:33 localhost kernel: Modules linked in: fuse ipv6 vboxnetflt vboxdrv snd_seq_dummy snd_seq_oss snd_seq_midi_event loop snd_seq arc4 ecb radeon b43 ttm drm_kms_helper mac80211 snd_pcm_oss drm snd_mixer_oss joydev snd_hda_codec_analog ssb tpm_infineon i2c_algo_bit cfg80211 hp_wmi mmc_core sparse_keymap tg3 ppdev rfkill snd_hda_intel parport_pc libphy pcmcia snd_hda_codec snd_usb_audio snd_pcm ohci_hcd yenta_socket pcmcia_rsrc pcmcia_core firewire_ohci snd_hwdep tpm_tis snd_usbmidi_lib hp_accel lis3lv02d i2c_piix4 video tpm snd_timer firewire_core evdev ehci_hcd snd_rawmidi crc_itu_t serio_raw snd_page_alloc tpm_bios output wmi input_polldev thermal battery lp sg ac container usbcore i2c_core button fan snd_seq_device shpchp parport edac_core edac_mce_amd snd pci_hotplug psmouse soundcore k8temp cpufreq_ondemand powernow_k8 freq_table processor mperf ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom ahci libahci pata_atiixp pata_acpi libata scsi_mod
    Feb 21 15:50:33 localhost kernel: Pid: 12986, comm: pm-suspend Not tainted 2.6.37-ARCH #1
    Feb 21 15:50:33 localhost kernel: Call Trace:
    Feb 21 15:50:33 localhost kernel: [<ffffffff81056a1a>] warn_slowpath_common+0x7a/0xb0
    Feb 21 15:50:33 localhost kernel: [<ffffffff81056af1>] warn_slowpath_fmt+0x41/0x50
    Feb 21 15:50:33 localhost kernel: [<ffffffff812b8596>] device_pm_add+0xb6/0xc0
    Feb 21 15:50:33 localhost kernel: [<ffffffff812aea8e>] device_add+0x4ae/0x5c0
    Feb 21 15:50:33 localhost kernel: [<ffffffff812aebb9>] device_register+0x19/0x20
    Feb 21 15:50:33 localhost kernel: [<ffffffff812aed53>] device_create_vargs+0x193/0x1b0
    Feb 21 15:50:33 localhost kernel: [<ffffffff812aed9c>] device_create+0x2c/0x30
    Feb 21 15:50:33 localhost kernel: [<ffffffff813a5fc1>] ? mutex_lock+0x11/0x30
    Feb 21 15:50:33 localhost kernel: [<ffffffff8129a3fa>] misc_register+0x8a/0x140
    Feb 21 15:50:33 localhost kernel: [<ffffffff8129d36f>] hwrng_register+0xdf/0x170
    Feb 21 15:50:33 localhost kernel: [<ffffffffa0426ab0>] b43_wireless_core_init+0xdb0/0x11a0 [b43]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa0427068>] b43_op_start+0x1c8/0x1e0 [b43]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa0477a15>] ieee80211_reconfig+0x335/0x400 [mac80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa046d8b8>] ieee80211_resume+0x28/0x70 [mac80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffffa02d8a55>] wiphy_resume+0x75/0x90 [cfg80211]
    Feb 21 15:50:33 localhost kernel: [<ffffffff812b7ebe>] legacy_resume+0x3e/0x80
    Feb 21 15:50:33 localhost kernel: [<ffffffff812b8025>] device_resume+0x125/0x130
    Feb 21 15:50:33 localhost kernel: [<ffffffff812b8192>] dpm_resume_end+0x102/0x3a0
    Feb 21 15:50:33 localhost kernel: [<ffffffff81096350>] suspend_devices_and_enter+0x90/0x1f0
    Feb 21 15:50:33 localhost kernel: [<ffffffff810965d0>] enter_state+0x120/0x150
    Feb 21 15:50:33 localhost kernel: [<ffffffff81095b16>] state_store+0xc6/0x100
    Feb 21 15:50:33 localhost kernel: [<ffffffff811f3c27>] kobj_attr_store+0x17/0x20
    Feb 21 15:50:33 localhost kernel: [<ffffffff8119f37f>] sysfs_write_file+0xcf/0x150
    Feb 21 15:50:33 localhost kernel: [<ffffffff81135ac6>] vfs_write+0xc6/0x190
    Feb 21 15:50:33 localhost kernel: [<ffffffff81135ddc>] sys_write+0x4c/0x80
    Feb 21 15:50:33 localhost kernel: [<ffffffff8100bed2>] system_call_fastpath+0x16/0x1b
    Feb 21 15:50:33 localhost kernel: ---[ end trace 19e4cbd37086936d ]---
    Feb 21 15:50:33 localhost kernel: PM: resume of devices complete after 1300.325 msecs
    Feb 21 15:50:33 localhost kernel: PM: Finishing wakeup.
    Feb 21 15:50:33 localhost kernel: Restarting tasks ... done.
    Feb 21 15:50:33 localhost kernel: video LNXVIDEO:00: Restoring backlight state
    And the solution on linux.kernel: http://groups.google.com/group/linux.ke … 616cfdb4a9
    Revert or wait!
    Or rmmod tpm_tis.
    Last edited by daroczig (2011-02-21 21:55:10)

  • RECREATE DATABASE Using CONTROL File After SUSPEND Database

    Hello All,
    Does someone can tell me if he does achieve recreating a database using "Backup Control File" after putting database in "suspend" mode?
    The procedure looks like this :
    1 - Alter DATABASE Suspend
    2 - A Snapshot of the filesystem where the oracle datafile are located
    3 - Copy of those files to another file systeme
    4 - Startup setting a new database name
    Does someone as do it successfully ?
    Thanks for your answer

    Carlos,
    I tried to do it without putting the tablespaces in backup mode and it didn't work for me. At that time adding the backup mode wasn't a big deal for me, so I didn't investigate the problem thoroughly.
    Logically thinking you sould be able to do:
    1. suspend database
    the SCNs recored in datafiles headers could be incosistent at this point
    2. make a snapshot
    3. mount the backup database
    4. run recover until cancel using backup controlfile - I don't think you can avoid this step in case if you have inconsistent SCNs in the datafiles headers - you'll need to synchronize them
    5. open resetlogs.
    the suspend database should eliminate the possibility of inconsistent data within a block during the backup.
    Just out of curiosity - why don't you want to put the tablespace in the backup mode?
    Mike

  • MEGA 865 Big Display problem

    Hi,
    i get my new MEGA 865 last Week, but i have a big Problem with it, every time i unplug and plug the Power Cable, the Display on the front is off.
    The only way to bring the Display back to live is to unplug and plug the Display Cable inside the Barebone from the mainboard. This cant be right, does everyone have the same Problem ??????
    Please write, if you have the same problem or not.
    Thanks
    Cooler  

    The information came from MSI Tech support.
    I also cannot believe that they sell a Multimedia PC with the MSI Media Suite package that just doesn't work. Any updates? No. Nothing. The MSI Media Suite is meant to be one of the reasons for it costing more than the other MEGA's.
    Generally as a rule, I hardly ever install anything from the manufacturers CD supplied with a system. Half the time they are just rubbish apps/utils that I hardly use. I don't really care what speed my Processor/FSB is running at - it's running and it is not below its spec, that's fine by me. My first stop is always the web site for the most current drivers and utils that are necessary.
    Obviously PC Alert4 is proving the exception here. It seems to me (I have no confirmation) that PC Alert as supplied on the CD, has API's / DLL's added to take care of the LCD display, and these have not been checked/thought of in a subsequent "standard" version.
    I am also interested in seeing how I could control / program the LCD display. I seem to remember someone saying that WinXP Media Center can also change the LCD Display, this hints at either a special driver or an API in XP to get to its settings. I'll try dig a little deeper when I have a spare moment unless anyone already knows the answer.

  • Custom Hardware Fan Control - problem if speed pin not connected?

    Hi There,
    I am planing to install a hardware fan control (poti) to my MacPro 1.1 rear fan. (because I have a defective northbridge temperature sensor and the fan is running at maximum speed... so i thought of slowing it down with a fan control for the pci slots)
    I read that the pinning of the Fan is: Gnd, 12V, Speed, Control Pin (analog Voltage)
    So when i would attach a fan control (just a poti) between some +5v and the Control Pin I think I should be able to control the fan manualy - am i right?
    But then the speed signal is not the speed the mac pro fan control software think of... so would it be a problem e.g. if i disconnect the speed pin from the mainboard fan connector?
    what would happen then? is the mac pro powering up the other fans for some kind of failsafe?
    Or have you other suggestions how I can lower the speed of the rear fan manually?
    thanks in advance,
    Stefan

    2010 2.8 Special $2119 - and throw in 6-core 3.3GHz yourself for $590
    Take a look at the project some have undertaken to go with water block.
    Send the motherboard in to have a 'skilled' electrician? repair the board perhaps.
    4 fans, 3 under the control of SMCFAnControl utility. Maybe disable the one fan and make up for it with your own fan and running the others efficiently.
    There are also VGA copper coolers.
    FBDIMMs bleed heat: maybe the RAM fan cooler kit in there to deal with large source of heat. New higher density DIMMs are better made and few DIMMs = less heat even if 4GB.
    Use ice packs, dry ice and liquid nitrogen to super cool :-)

  • Mega 865 wireless network problem.

    Hi all,
    New here and seeking a solution to a specific prob.
    Have built a system from with a MSI Mega 865 Delux. P4 Chip, ATI all in wonder graphics/TV card, Maxstor 160 GB hDD.
    System is specifically as a home entertainment/ video capture and record.
    Problem with wireless networking.
    I have a wireless network with three PCs all with USR wireless cards and a usr 8054 router which actually does little but extend the rance of the network, Internet connection is through host computer on a single channel ISDN line.
    When I connect to the network with my Mega 865 (XP TO XP) the connection is massivly slow, in fact pages on the net refuse to load it is that slow.
    The 865 is causing the host compiter to drop its connection to the router for about 50 % of the time, I can see its icon flashing red as the connection is dropped and returning to green as it reconnects.
    It sounds like an incompatibility issue some where but I can't find anyone else with the same problems.
    Any ideas anyone?
    Thanks, Epirb.

    Quote
    Originally posted by Normunds
    Quote
    Originally posted by epirb406
    PS didn't I read somewhere else on this forum that SP2 is a bad idea with this machine?
    To my knowledge, the SP2 caused trouble for Mega 865 if a certain type of P4 CPU was installed (Prescott?)
    That was so because this sort of CPU requires some "alternative" microcode to be loaded into it upon startup.
    One published workaround was to replace certain file in the SP2 package with its predecessor from SP1,
    another (more solid, IMHO) - to upgrade the BIOS of PC so this revised microcode is loaded with BIOS. At this point in time, I believe, the revised Mega 865 BIOS is available as an official release.
    You are right, the issue is only with certain processors; see also (this includes the m-soft workaround too)
    http://support.microsoft.com/default.aspx?scid=kb;en-us;885626
    This revised bios is not available IMHO, one of our forum collegues managed to get a beta version of a new bios, which does the trick. If you need it give us a shout.
    Ray

  • MEGA 865 CD playback problem (in HiFi mode)

    Hi, fellow MEGA PC owners
    I have a problem with playing my CDs on MEGA 865 in HiFi mode. It recognizes the CD, plays the first track or two, then stops playing, displays SEARCHING message for a ten seconds or so and then switches to NODISC. When I press Eject button on the box or remote, it switches back to SEARCHING and shows the number of tracks on CD.
    The same problem is with the MP3 playback. It plays several MP3s ok and then switches to SEARCHING and NODISC.
    Does anyone else has this problem? Any idea on what could be wrong? I checked all Slave/Master jumpers, all are ok, the cd drive is recognized by the BIOS.
    My configuration is:
    MSI MEGA 865, P4 3.0 GHz Northwood, 1 Gb PC3200 RAM, NEC 2500A DVD burner.

    Hey JavaDuke!
    I've got the exact same problem with my Mega180, also running a NEC 2500A! And it is starting to get very annoying...
    I can play cd's for hours without any problems, when suddenly it stops in the middle of a track, displaying the NODISC message. Doesn't matter whether I use original cd's or copied ones, and the same disc can play through perfectly one day and halt several times the next. I've been thinking about replacing the NEC 2500 with something else but haven't got round to it as yet, however the post in the thread mentioned above states that different drives still produced the same error, so it's probably the bluebird chip that is faulty.
    The mentioned thread doesn't really focus on our problem though as it mostly evolves around boot problems, so I don't see any problem with starting a new thread dedicated to this problem.
    I might try the newer firmware, although there is no official word from MSI that this problem even exists, and I therefore doubt that it is solved. Not many people seem to have this particular problem either, or it appears so seldom that they choose to ignore it (as I have done for some time now).
    Please report back if you solve this one!
    -M

  • Mega 865 Fan airflow

    Sorry for my 3rd post in 2 days but i have to improve my Mega 865!! Does anyone knows how much is the fans air flow and noise (numbers) of my mega 865?

    look in the Cooling sticky, and read the Project Silent But Deadly thread for suggestions on replacing the fans

  • Fan control problem on Z77A-G45 Gaming

    Hi,
    I've got this problem: I have Z77A-G45 gaming mobo and thermaltake water cooler (water 2.0 performer) on cpu and, by default this motherboard makes this cooler work with full 2000 rpm, but if I open the msi utility program "Control center" and go in "Green power" tab and use "CPU fan control" it makes cooler to run normally with 850 rpm. But problem is, when I turn off or restart PC, it starts again with 2000rpm and I need to open that "Control center" again and click check "Cpu fan control" to make cooler work normally. So what is solution to this problem? How to make it remember "cpu fan control" option marked? I don't want to start this application manually everytime I boot my computer.

    Try entering bios and enable cpu smartfan and save on exit.

  • Another volume control problem after installing new software

    I'm having a different volume control problem than the previous poster.
    When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

    Friend should do an update again your team blackberry.
    Remember to make a backup with Desktop Manager and the BlackBerry protect
    Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
    Software For BlackBerry® Torch™ 9800 smartphone
    BlackBerry Handheld Software v6.0.0.3170 (Multilanguage) 
    Package Version: 6.0.0.3170
    Consisting of:
    Applications: 6.0.0.756
    Software Platform: 6.6.0.252
    File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
    File size: 171.22MB
    https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
    Regards.
    Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
    Accept as Solution to ** Comments **
    @gutijose14
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • RS480M2 - Cool'n'Quiet fan control fails after hibernation

    I'm using my RS480M2 as a HTPC base.
    Works great (integrated s-video out is NICE!)
    Cool'n'Quiet works great when the system is booted normaly but efter hibernation the fans doesn't reduse speed.
    Anyone knows anything to fix this?
    Maybe disable Qool'n'Quiet fan control i bios and use speedfan instead?
    My current config
    WinXP Pro SP2
    Latest reference drivers for Chipset/Graphics from ATi
    Latest reference drivers for sound and LAN from Realtek
    Athlon64 3200+ (90nm winchester core)
    2x512Mb twinmos DDR400 cl 2,5
    60Gb 2,5" Hitachi HDD
    Any Ideas?

    I always use speedfan in the BIOS and leave C&Q enabled.
    As C&Q does more then regulating the fan, it also regulates the speed of the CPU.
    But you can remove corecenter for fancontrol and use speedfan in the BIOS.

Maybe you are looking for