Mega 865 LCD used to work

The LCD used to work then it just stopped.  I've uninstalled and reinstalled PCAlert 4.0.  Isn't that what controls it?  What else can I try?

the only thing that works is to swith off the pc for say 1-2 minutes (unplug power) and switch it on.
I have also experimented with this and found that if you unplug power and plug it in straight away, sometimes it rectifies itself also. Try several times and if no go let it have a rest (nap) aned try again later.
good luck

Similar Messages

  • Mega 865 Lcd Died

    Hi I understand that there are some other threads with the same issue, but I would like to post this thread with a clear subject title.
    Here is the problem...
    The LCD died after a day of usage. It turns out that the display was frozen, so I turn off the pc and turned off the mains. I then turn on the mains to expect a flashing clock on the front LCD. but nothing. It is black.
    The Hi-fi seems to work but using it without the panel is pointless.
    So now the system still works, but no front LCD.
    There was a firmware patch for the 180 LCD panel that apparently fixes the problem. Is there one for the 865?

    Ok it has been several days, there are other users with the same problem. I have contacted MSIs customer support, however it seems they have a long turn around time on their replies.
    If the units are defective MSI should say something about it, so far from what I have read, there are no official announcements for the MEGA 865 LCD problems.

  • Mega 865 configuration - will it work?

    Hi there
    I am just about to take the plunge and build myself a Mega 865 and have a few concerns over what I intend.  The configuration I am thinking of is as follows:
    Mega 865
    P4 3.0Ghz 512 cache 800fsb
    2 x Corsair 512Mb DDR400/PC3200
    Maxtor Diamondmax Plus 9 160Gb Serial ATA 7200 8Mb Cache
    MSI DR8-A2 DVD-RW
    MSI GeForce FX5900XT
    Nebula Digitv PCI card
    My concerns are as follows:
    1) Will the GeForce FX5900 physically fit in the Mega 865?
    2) Will the PSU supply enough power for this configuration?
    3) Will temperature be a problem?
    Any advice on the above would be greatly appreciated, along with any other issues that I may have overlooked.
    TIA
    Blinkie

    1: It will eventually fit when you carefully route the power wires.
    2: Don't know, if your're lucky: be aware that the PSU has effectively about 200W (when heat is involved)
    3: Heat will be a problem but can be managed: look at the thread of Anakin on this forum.
    Check for the serial ATA connector onboard. I don't know about the 865, but although the 180 has a serial ATA power connector, it cannot be connected to the motherboard.
    JaDi.

  • Mega 865 Pro - 800 x 480 resolution

    Does anyone know how to get 800 x 480 resolution on the Mega 865 Pro using the on board video card in Windows MCE RU2?
    Thanks

    Thanks Kane
    I've looked at powerstrip but i've not been able to get it to work
    Has anyone else used powerstrip to get 800 x 480?

  • MEGA 865 - no LCD display

    My LCD display has suddenly stopoped working after a few days. It worked when I first plugged it in fine. Have tried the unplugging for 2 minutes trick, but it did not solve it. What do I try next? Can someone please help?
    Pete

    I've had this problem many times and I want to share the tip on how to make your LCD work again. Pull it out and plug it back in but slowly. What I mean is when you plug the power cord in, the connector on the cord just barely touch the connector on your Mega 865 and you will  see the Hifi LED lights up. If it doesn't work, do it again by moving it around. Suddenly you will see your LCD back on again

  • MEGA 865 Fan Control Problems using suspend/hibernate

    I'm still having problems with the MEGA 865 CPU fan speed going to MAX after I come back from suspend or hibernate until a reboot of the system.
    This is super annoying.
    MSI tech support sent me a BIOS they thought might solve the problem... but it's OLDER than the one on the web site, PLUS it doesn't fix the problem  
    When will MSI look into this problem? When will a real fix be available? :(

    MSI sent me an updated 1.1 BIOS which actually fixes this problem. Unfortunately when I now resume from hibernate or standby the computer is so slow I have to reboot it - sort of defeats the point don't you think!
    As for a response from Tech support. Well I might aswell get some

  • Things to know before (and after) building a Mega 865

    As I am seeing a lot of the same questions regarding the Mega 865 I created this document,
    29-Oct-2004 Added Northwood benefits
    29-Oct-2004 Emphasized NOT to use live update for bios update
    Processors in general
    Start with the processor, I would say get something around 3 gighz (give or take) which is quite affordeble. If you are going for a prescott, make sure you upgrade your bios to 1.3 (see below).It will run a bit hot (understatement) otherwise.
    If going for northwood any version is ok I believe. When I chose mine I let $$$ descide, and the prescott was on sale. (If I would buy a CPU for the Mega again, I would most likely go for a Northwood this time). Before buying your processor make sure your processor is supported, you can find the supported processors here;
    http://cweb.msi.com.tw/program/products/slim_pc/slm/pro_slm_cpu_support_detail.php?UID=547&kind=4
    Harddisk
    As for Harddisk, I would suggest anything goes but take a serial ata since that is becoming the new standard nowadays.
    When buying a HD larger than 130 Gig, make sure you install from a Windows XP SP1 CD (or higher) or divide your HD in smaller pieces. Otherwise you will not get a bigger partition than 130 Gigs.
    DVD/CDROM
    As for DVD/CD player, there is a special thread (see below) where everyone states if their DVD/CD player is working with the mega (there are some issues with some drives in HiFi mode, EVEN if they are MSI)
    Mega PC barebones optical drive compatibility list
    Memory
    As for memory, get at least 512 Mb or 1024 Mb if you want to sit cosy. two sticks of DDR400 (a.k.a 3200) will do. Get a a-brand like Kingston, Samsung or look around on the forums what will work.
    Installing Windows XP
    Before installing Windows disable your USB devices, if you fail to do this you run the chance of not installing Windows XP on your C: drive (harddisk) and this will cause you trouble later on. After installation is complete you may enable them again.
    Prescott processors & full size AGP cards
    As for the GPU (Graphics card), this depends on what you are going to do with it. If you wanna try out at showshifting, and viewing get one with integrated TV tuner. Or use the on-board (some people are quite happy with it) and add a separate PCI tv tuner. If you wanna do hefty gaming (Doom3, Far Cry ... etc) you may want to get an better one. I'm quite happy with my Radeon 9800.
    Please note; According to MSI, Prescott processors in combination with full-size AGP (add-in) cards are not supported. This is most likely a power issue since the full-size cards use a lot of power to run. Some forum members, stuborn as they are, are running with a full-size card.
    Also note that you are installing a full-size card on your own risk in combination with a Prescott processor.
    To calculate your estimated power supply take a look here;
    http://www.jscustompcs.com/power_supply/
    The following graphics cards seem to be working (please add to this thread if you have tested a full-size card with a Prescott processor so I can add it to this document)
    Club3D Radeon AIW 9800 PRO
    ATI Radeon ALL-IN-WONDER 9600 XT
    ATI Radeon 9800 SE
    AOPEN Aeolus 5900XT 128 Mb
    Wise words from Stu:
    If you do not want to take chances, go with a Northwood processor. Apperantly there is little perfomance difference between a Northwood and a Prescott processor, and the Northwood runs slightly cooler too.
    Windows XP Service Pack 2 & Bios Update
    When installing Windows XP with SP2 make sure you have the latest Bios version loaded (1.3) or install a Microsoft work-around fix. SP2 will not install without it, and you will have a hard time getting your system to work.
    The Microsoft work-around fix can be found here;
    http://support.microsoft.com/default.aspx?scid=kb;en-us;885626
    The latest bios version can be downloaded here;
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=547&kind=4
    To install the latest bios, I would advise against using live-update. Use one of the following options instead;
    1) Burn a bootable CD-Rom also containing the bios and flash software, (note some of the original Win98 CD's are bootable to MS-DOS prompt)
    2) Create a bootable USB-memory key
    --- Download the HP util to create one
    --- http://h18007.www1.hp.com/support/files/hpcpqdt/us/download/20306.html
    --- Then create a bootable floppy on an other system or download from
    --- http://www.allbootdisks.com/
    --- (I used the Win98SE No ramdrive )
    --- Then use the HP tool (on an system with an floppy drive) and enter a: as the source for booting,
    --- and use the above created floppy.
    --- Then copy the rest of the files from the a:\ drive (like autoexec.bat, config.sys etc) to the memory key.
    --- ... and ... voila one bootable USB
    --- make sure in the bios that the boot order of the USB key is before the Harddisk and your set to go.
    3) Attach a floppy drive to the Mega 865
    Bios update failure
    Some people still manage to goof-up their bios, by doing the bios update from windows (winflash, live-update). I think there is only one road to travel when this happens, you have to attach a floppy drive to your mega. Then follow the following instructions (Award bios)
    http://www.msi.com.tw/html/support/bios/note/boot.htm
    Good luck !
    PC-Alert
    Do not use the PC-Alert version from the MSI website as this does not work together with your Mega 865, instead only use the one on the CD-Rom that was supplied. In general even the supplied PC-Alert has caused a lot of grief (Taking up resources, reboot problems ... etc). If you choose to install PC-Alert, at least remove it from your start-up folder where it is installed. You can always start it manually from the MSI menu in your Start menu.
    A good alternative to Pc-Alert is Speedfan, this program should be able to spot your 2 temeperature sensored CPU fans. You can then connect these fans to the CPU temperature sensor and be able to tweak the RPM's according to your need. Speedfan 4.17 can be found here;
    http://www.almico.com/speedfan417.exe
    Temperatures
    As these tiny PC's have very little space, it is quite normal for them to run a bit hot. Do not be alarmed to see CPU temperatures around 60-65 degrees when running on load (depending on your processor of course).
    Wireless Network adapter
    As for wireless internet, the mega865 has a built-in mini-pci nic (network card). which supports only the 11 Mbps data rate. I think you have to try it out and see how it goes, you can always upgrade to 54 Mbps. I would suggest to get a 54Mbps access point, so you can always upgrade if needed (54Mbps will also work with 11 Mbps) Some forum members have succesfully replaced their Wireless Network adapters with a 54Mbps one. The following network adapters seem to be working;(please add to this thread if you have tested a wireless 54Mbps network adapter so I will add it to this document)
    Intel PRO/Wireless BG Network Adapter
    6 Channel sound
    I recently bought a 5.1 set from Soundblaster. You can connect the 3 connectors to the back of your Mega, then in the Sound util set it up for 5.1 surround sound and you are ready to go. Definately worth it !
    Reboot problems
    When you run into problems when the Mega reboots suddenly, watch out for a couple of things.
    Always check your event/log viewer. It is in your configuration management, but the easiest way to start it is to enter the following in your Run or Command line entry
    eventvwr /s
    Check if you see red-dots in your application section or system section. Google the problems before dropping them on the forum ! (As most problems are not Mega related IMHO)
    One problem I had was caused by BITS 1.5, I had to upgrade to BITS 2.0. (I think it was recently released by Microsoft-Update but I mention it anyway). Bits 1.5 caused my Mega to reboot.
    LCD Display / Sound problems
    If you have any problems where your front LCD display is not working or your on-board sound is 'missing' first try unplugging your mega from the power outlet (so completely powering down) for 2 minutes. If you still have problems, drop them on this forum.
    LCD API ?
    Alas, no external programs are available to 'drive' your LCD display. Nor will MSI release an API/Blue print on how to control it.
    If you find anything missing here or have additional tips, please add them to this thread and I will update this document.
    Good luck with your Mega !
    Raymond

    rkoppen i salute you  
    a truly glorious summing up of the main points asked about the Mega 865 in particular, although many points will invariably refer also to the other Mega series
    if i can add my tuppence worth, anyone considering going for a powerful graphics card can always shy away from the prescott
    i was reading an article just when the prescott core cpus came out and the review basically said that there wasn't really much performance wise between the new prescott and the older Northwood cores.
    obviously newer prescotts have higher clock speeds now (3.2? 3.4??), but surely a 2.8ghz CPU is still going to be powerful enough to play the latest games!! (in conjunction with a top graphics card obviously)
    is the extra temp increase surely worth the extra couple of hundred mhz?

  • Media Center DVD 'Stutters' on MEGA 865

    Hi
    I am an IT professional, but I am a newcomer to the MEGA series PCs.  I bought a MEGA 865 Delux for a 'computer newbie' friend as payment for a favour, and I am in the process of configuring it all now.  
    Spec is
    MEGA 865 flashed to bios 1.2
    MSI DVD Player DR8-A2 BIOS 1.6
    NO TV CARD (yet)
    Win XP PRO SP2
    512MB RAM
    Celeron 2.0GHz (yes I know, but I had a new one going spare, it'll do for now)
    I have applied ALL latest drivers
    I have applied ALL latest BIOS patches
    Windows XP is fully patched up to SP2
    I am currently running in 1024x764 Truecolour 70Hz mode.
    Everything works great, my friend should be really pleased with it  ... except  
    MEDIA CENTER III !!!  
    Now that was kind of the idea of buying the MEGA PC, my friend could use it with the remote control for DVD, Radio etc etc, but when I play a DVD using the media center it 'stutters', the video and sound are interrupted and it really is unwatchable.
    Looking at the CPU resource is see that it is strained to 100% utilisation.
    If I run the same DVD Movie with PowerDVD (came with the MSI DVD Drive), or even with Windows Media Player, it plays beautifully and the CPU is comfortably down at 40% utilisation.   Unfortunately the remote seems to do nothing for PowerDVD.
    Is anybody finding that the Media Center works great on their system? (if so, what's the secret?)
    Has anybody else encountered similar problems to mine?
    Does anybody know how I could fix the problem so that when I present this great new system to my friend as an expression of my gratitude, it is not 'flawed'?
    Please help if you can, I would like to deliver the system in the next couple of days.
    Thanks
    Steve

    Thanks for the advice everyone.
    After much searching I found the elusive registry changes and applied them to my system.  Unfortunately these changes made no discernable difference to the DVD playback.
    While I appreciate that there are a number of Open Source projects in development (dependant on 'Girder', pay software that still does not appear to FULLY replace the advertised functionality of the Remote/LCD/Radio etc), and also alternative products that I could purchase, I do not feel that I should have to buy these to make my MEGA media center PC play DVDs.  
    It's not as if the inability to play DVDs is a minor issue in a Media Center.  It's fundamental!!
    If it will not work as a media center PC 'as supplied' then it seems to me that I should return it to the retailer and buy a 'Shuttle PC' for much less money.  I could spend the savings (I reckon on about £70) on a better CPU or just pocket the difference.  Features and software that do not work are of little use to anybody.
    With all due respect to you all, if everybody who bought the system and had these problems returned it to the store as 'not fit for purpose' then I suspect MSI would have resolved the issue long ago.  It seems to me that end user tolerance has resulted in MSI's indifference.
    If I have no fix by Thursday then it's back to the store.
    I have mailed MSI Tech Support, hopefully they will come up with something as the system looks great otherwise.
    Still open to suggestions that do not include 'break up the CD' or 'buy this other software'.
    Thanks
    Steve

  • MEGA 865 Deluxe with MSI DR8-A 8x8 DVD±R/±RW Writer

    Hi everyone,
    I am just about to put this box together, please advice..
    Heard any compatibility issue on this one? IE, ejecting problems or loosing functionality in PC or HIFI mode? or any issues at all....
    MEGA 865 Deluxe with MSI DR8-A 8x8 DVD±R/±RW Writer
    It will be a bummer if I go put this together and it doesnt work properly. That will be money down the tube.
    Thanx.

    I have the same box and optical device. I have yet to get an audio CD to play completely through in HiFi mode. It will play for 3 to five minutes and then quits, LCD reads No Disk. I can get it to start up again with no problems but it only plays a few minutes at a time.  It works fine in PC mode both in playing Audio CD's and DVDs so I am guessing that my problem lies in Hi Fi circuitry/or wires. I believe you should be able to use the 865 in Hi Fi mode without O/S, Memory, or even a CPU. Good luck.
    DS

  • Mega 865 Issues

    I'm having a couple of issues with the Mega 865-based PC that I just built and I'm hoping some people here can answer a couple of my questions. If interested, system specs are at the bottom.
    1. I can not get MSI's Media Center III to run in any stable form. Typically after I install it and reboot I will try to start the program and it will crash before anything is even displayed on the screen. Furthermore, this freezes the display on the front of the computer itself and the only way I've found to reset this is to shut the computer down and unplug it for a little while. This will happen regardless of how many times I re-install the program.
    2. When I start the computer after having not used it for a while it will make it as far as loading the user login screen in Windows XP and then restart. After trying to start it normally or in safe mode enough times it will finally load Windows propperly and continue to work well. I can even shut it off, unplug it, and turn it back on without any problems. This only happens if it's been sitting off for an extended period of time. (several hours)
    Other than these two issues the system has worked flawlessly for me. Hi-Fi mode works well and once it starts the system is stable under load dispite fairly hight CPU temperatures. If anyone has any ideas on how I might be able to get around these problems please let me know and thanks in advance.
    - Ed Andocs, [email protected]
    MSI Mega 865
    Pentium 4 Northwood, 3ghz
    1gb Corsair ValueRam
    ATI Radeon 9800 Pro
    Samsung 7.2k RPM 160gb HDD
    MSI CD-RW/DVD Combo Drive 52x24x52x16

    Had the same issue with mine when I started. The crash of the MMCIII is due to some writing issue of the program to the LCD screen and once the screen is upset then you need to unplug the PC to clear it. I started getting these issues after I used live update from the web, I think I downloaded a bad version of PCalert. Anyway in the long run I formated and only used the versions on the CD and it all worked fine. Oh and if your wondering about the performance of MMCIII, it doesn't get better.  

  • MEGA 865 Big Display problem

    Hi,
    i get my new MEGA 865 last Week, but i have a big Problem with it, every time i unplug and plug the Power Cable, the Display on the front is off.
    The only way to bring the Display back to live is to unplug and plug the Display Cable inside the Barebone from the mainboard. This cant be right, does everyone have the same Problem ??????
    Please write, if you have the same problem or not.
    Thanks
    Cooler  

    The information came from MSI Tech support.
    I also cannot believe that they sell a Multimedia PC with the MSI Media Suite package that just doesn't work. Any updates? No. Nothing. The MSI Media Suite is meant to be one of the reasons for it costing more than the other MEGA's.
    Generally as a rule, I hardly ever install anything from the manufacturers CD supplied with a system. Half the time they are just rubbish apps/utils that I hardly use. I don't really care what speed my Processor/FSB is running at - it's running and it is not below its spec, that's fine by me. My first stop is always the web site for the most current drivers and utils that are necessary.
    Obviously PC Alert4 is proving the exception here. It seems to me (I have no confirmation) that PC Alert as supplied on the CD, has API's / DLL's added to take care of the LCD display, and these have not been checked/thought of in a subsequent "standard" version.
    I am also interested in seeing how I could control / program the LCD display. I seem to remember someone saying that WinXP Media Center can also change the LCD Display, this hints at either a special driver or an API in XP to get to its settings. I'll try dig a little deeper when I have a spare moment unless anyone already knows the answer.

  • CARD READER PROBLEM-Mega 865

    I'm having a problem w/ my card reader ...I have the 6 in 1 ...you know.
    Anyways when I insert the SD card and attempt to access it i get the following error.
    "E:\ is not accessible.
    The request could not be performed because of an I/O device error."
    This happened with another SD card i have also.
    1 of them is 256mb
    the other 512mb
    same issue with both cards.
     anyone had any thing like this happen?
    any suggestions or knowen issues....?
    Thank You . Sys Spec listed below if it help any.
    Mega 865   
    Operating System   Microsoft Windows XP Professional
    OS Service Pack   Service Pack 2
    Motherboard   
    CPU Type   Intel Pentium 4HT, 3000 MHz (3.75 x 800)
    Motherboard Chipset   Intel Springdale-G i865G
    System Memory   1015 MB DUAL CHANNEL  (DDR SDRAM) PC400
    BIOS Type   Award (02/25/04)
    Display   
    Video Adapter   Intel(R) 82865G Graphics Controller  (96 MB)
    3D Accelerator   Intel Extreme Graphics 2
    Monitor   Sony SDM-HS73 LCD 17"
    Multimedia   
    Audio Adapter   Intel 82801EB ICH5 - AC'97 Audio Controller
    Storage   
    Disk Drive   Maxtor 6Y160M0  (160 GB, 7200 RPM, Serial-ATA/150)
    Disk Drive   OEI-USB CompactFlash USB Device
    Disk Drive   OEI-USB SM/MS/SD USB Device
    Optical Drive   SONY DVD RW DW-D18A
    Input   
    Keyboard   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
    Mouse   HID-compliant mouse
    Network   
    Primary IP Address   192.168.1.101
    Primary MAC Address   00-0C-76-70-9C-12
    Network Adapter   Broadcom 440x 10/100 Integrated Controller
    Network Adapter   IEEE 802.11b MiniPCI Wireless Network Adapter  (192.168.1.101)
    Modem   Actiontec MDC AC'97 Modem v2132A
    Peripherals   
    Printer   \\COMPUTER\hp deskjet 3500 series
    USB Device   Motorola MPx220 Smartphone
    USB Device   USB Human Interface Device
    USB Device   USB Mass Storage Device

    seems that the card reader wouldn't read SD cards, but was ok with MMC. i have replaced her combo drive with another Mitsumi one, and now both SD and MMC cards work fine. gonna try the faulty combo drive in my computer later, but i suspect it is a faulty card reader
    EDIT: looks like i jumped the gun a bit - mum says the new drive is now doing the same thing  trying her old one in this computer and so far all looks ok.
    BTW her XC Cube is the EY65, which - like the Mega 865 - uses the Intel 865g chipset
    does anyone have any suggestions for us? it cannot be a conflict between the OEI-USB card reader devices and the intel 865g chipset, otherwise every mega user would have seen this....

  • Anyone want a Mega 865?

    I've got a Mega 865 that has (again) died.  Can't remember the actual CPU in the machine and have been too fed up with it to remove it to see.  I know it's some sort of P4 - I think around 1.6ghz.  MSI has consistently failed to support this product in my case, and I've been unable to get support from MSI yet again.  The original unit was DOA 2 years ago.  This unit was somewhat flaky all this time (repeatedly had to unplug and replug unit for front panel to work.  It has 512mb Corsair DDR memory in it.
    Anyone interested in buying it for pennies on the dollar with or without CPU and RAM?  I'm not going to waste any more time on it.  I want to keep the drives.  The unit doesn't have a single, solitary scratch or blemish.  I do have the original remote (though I never used it).

    Please read and comply with the Forum Rules.
    we do not allow buying or selling of any product in this forum. however, if anyone is interested then please contact the topic-starter directly by PM or Email (use the buttons on the left)

  • Mega 865 Duluxe - Graphics card upgrade

    Hey there, I have a mega 865 Deluxe and I have just brought an LCD TV.  I am currently using the onboard graphics card, but thinking about adding in a new card that has DVI output.
    Can anyone suggest what sort of card i can get away with adding.  I'm gonna use it for the occasional game, watching dvd's and using the LCD TV as my new PC monitor.
    My current set up is:
    Mega 865 Deluxe
    Win XP Pro SP2
    Northwood P4 2.8
    Maxtor 80gig harddrive
    1Gig
    Soundblaster 24 bit Live sound card

    Thank you. I just picked up an ATI AIW 9800...I read here that a lot of people are using that. I am using the 2.8GHZ Northwood processor, so I hope I don't run into over heating issues 

  • Tvanywhere and Mega 865, install MSIPVS fails ..

    Was unable to find  a local source for the add in tv card for my MSI MEGA 865 and decided to use the TV anywhere card.  I was also interested in the NTSC and PAL support.   Everything went well until i tried to install the MSIPVS Software.  The drivers installed properly in step one, but in step 2 installing the MSIPVS software i received a "Setup failed to run installation: The remote procedure call failed".  I uninstalled the MEDIA Center Deluxe III program and removed all software except INCD.  I am running windows XP, 512 mb memory, 3ghz intel processor.  I removed the software and hardware and tried to reinstall several times, it made no difference and it failed in the same place.

    see threads in the Mega PC forum
    Windows XP has installed itself to the E: or F: drive because the card reader has taken C: and D: and in this case Intervideo software won't install correctly
    you're gonna have to disable the built in card reader (either unplug from inside, or disable USB controller in BIOS) format your hdd and reinstall windows to C: partition - not sure if Repair would fix it
    this happened to me the first time i built my mega 651 and it was SO frustrating, especially as everything else worked fine

Maybe you are looking for

  • File Adapter Archiving Issue

    Hi, THe file adapter archives the file, it doesn't save the entire contents of the file in the archive folder, but saves the first recordset (row) only in XML format. Did any body face similar issue, and what's the resolution to archive the contents

  • BI content configuration problem

    I'm working on a new installation of our development BI, and I'm trying to complete the configuration.  I have the RFC connections working, and did the replication between our ECC 6 system and the BI system.  However, when I look at our Infoproviders

  • Custom finders in CMP beans

    Do you know how to specify custom query strings for finder methods of CMP beans? null

  • How to delete Workarea in Designer 10g R2?

    I have created so many workareas. I have exported the application systems from a Workarea and I wish to delete the Workarea permanently. Does anyone know how the Workarea could be deleted?

  • Error when updating Vacancy in oracle iRecruitment

    Hi guys, I have an issue coming up when updating a vacancy in iRecruitment. ERROR: The Mandatory column ATTRIBUTE (Also Known as ATTRIBUTE1) has not been assigned a value. Please help me, I am thinking it is an error related with the DDF or LOOKUPS,