MEGA PC 651 Power Supply Needed

Hi wonder if anyone can help. My power supplys fan has died so the system is getting quite warm shall we say (about 52oC normal).
I need to replace this asap and reading this forum there are problems at to extra conections for the HIFI in off mode.
I actually dont use the radio or DVD player in off mode so i am not bothered about these conections.
Anyone know of a UK available power supply that i can replace this defective one with.??

Sorry didnt make it clear. The fan does work if i connect it to a 12v supply, but the internal board in the Power Supply isnt powering the fan.
Got round this by, detaching the fan from the power supply, and splicing it nto a motherboard power connector. Now when i turn it on the power supply re supplies the internal fan from outside supply.

Similar Messages

  • Mega 651 power Supply

    Hi ,,, was just wondering if its possible to fit a more pwerful power supply in the Mega PC 651 ...
    I recently fitted a MSI GeForceFX 5900XT graphics card and as most of u will know this card requires a fair ammount of power and while benchmarking my PC using 3d mark 2003 i got a warning saying the cards performance has been restricted due to a lack of power, please check connection and that power supply is good enough etc...
    well the mega PC 651 has only a 200 watt power supply so i assuming this is the problem... mind u the card has been ok since and i have done numerous benchmarks ... :D
    i dont want to damage my hardware so is it possible to get a better PSU and where from ? or do i need not worry ?
    thnx

    Good PSU include Antec and Enermax but I do not know if they will fit.
    Try the card first, if it does not work or give u low performance then u may consider buying a new PSU, otherwise leave it.  

  • Mega 651 Power Supply Replacment..

    Hi Everyone,
    Where on earth do you find a power supply replacment for the Mega651.  I've tried tracking it down from FSP Corp. (manufacture sticker on supply) and countless websites but can't find one anywhere...Anyone?
    Thanks!
    Steve

    Hi Pico,
    have a look at this post :
    The definitive(?) guide to replacing the MSI Mega PSU
    it may be of use

  • New MSI Mega 651 Power Supply

    I want a new power supply for my 651 and after reading these forums I have found out that the only way to get out of the box compatable one is to order from MSI.  Of course it isnt on their online store so I am trying to call the US headquarters and pressing 1 for sales.  I have been trying for DAYS with no luck, always all operators are busy and the 2 times I kept pressing 1 for over an hour when it was finally answered they just hung up without saying a word.  Is there a trick to contacting them or should I be calling someone else?

    you're right! that email addy is hard to find!
    i suppose you could fill in the online tech support form here:
    http://www.msicomputer.com/msiforms/c_problem_desc_form2.asp
    and explain that you'd like to purchase a new PSU, maybe they will respond that way

  • Thinkcentre M70z power supply needed in india maharashtra please help me out or support me

    Hello there if any one could help me out of this i will be so thankful to him or her anyway.
    i have lenovo thinkcentre m70z All-In-One desktop and its power supply burnt yesterday.
    i need one fresh brand new SMPS / Power suppy for it.
    from where i got that???
    Thanking you
    Contact  +919421472324

    ok, i've calmed down now and i think everythings sorted. all my files are still there and all applications, the ?'s just needed clicking on in the dock. i found it strange and wondered why my background changed. it's not a big deal, i just changed it straight back, but it made me think if that changed to default what other settings have changed to default? i've only had my mac a week or so, so i can't remember changing anything drastic, so this shouldn't really be a problem.
    thanks alot for all the help, i'll know where to come next time i have any trouble. i love knowing that mac's have a good community of people willing to help each other out.

  • Power supply needed

    I need the part number and/or specs. for a power supply to fit Creative Lab speakers SBS5. They are a 2 speaker system w/out subwoofer. Anybody have any idea?

    Roger
    Ihave a Tagan 580w U22 with switchable dual/combined +12v rails and it is very stable,set it combined for 35a.
    Only thing to ponder was the 4/8 pin +12v/p4 connector,power supply has the correct split 2x4pin connectors so does the board but there is a little removable cover over 4 pins,so thinking MSI fitted it there for a reason I have fitted only one 4 pin connector,no problems as yet.
    Think you may well have a point re the 18a.
    I have just given my son my old sli platinum/cpu/heatsink/ram/vga card,this setup ran  250/11/4 @ 1.4v & ram 2.5 3 3 7 1.1 @ 2.75v with the Tagan.this setup now fitted in his case but with a dual 18a rail Enermax and he can't o/c stable to the old settings.Case has better cooling than the wavemaster it all came from.
    Dont think the enermax is bad just that it supplies the power a different way.
    Regards
    Rossoevo

  • Replacing my dv6-1260se power supply, need help.

    I am in need of a new power supply for my laptop and was wondering which one would be the best.  i believe my options are the 90w smart ac power adapter and the slim power adapter.  any suggestions?

    So what's the issue you're having?
    I have never heard that rumor, a volt is a volt, an watt is a watt.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Min power supply needed to make Aiport Express work ?

    Hi all,
    I plan to install an Aiport Express in my car to plug it to my car stereo in order to be able to use my Iphone 3GS music library.
    First, I'm tired to use cables !
    Furthermore, my car OS (vauxhall) is not anymore a "compatible device" (sic), even with the latest iOS ... but I've got a jack plug :-/
    I plan to plug the Aiport Express to my car stereo throught this jack, and broadcast my music throught airplay. The Airport Express would be electrically powered throught the cigar lighter receptacle, or throught a 12v-220v converter (I'd rather prefer the first solution !).
    So here is my question : what is the minimal power supply to make work the airport express ? According specs, 12Vdc 1.8A => ~22W ?
    Does somebody can confirm 22W would be enought to make the Aiport Express work ?
    Thanks a lot !

    I'm referring Airport EXPRESS ... I forgot that plugs directly ...
    The exterme offers other possibilities I don't need ... and is less affordable !
    In a car, we only avec DC =>
    So I must have  a 12 Volt DC to 220 Volt 50Hz AC inverter, delivering at least 200mA(AC).
    Something like this or rather this.
    I should find it in a good electronic shop, and this kind of material should be rather small.
    I'll also check if these devices provide AirPlay without a wi-fi network... or if somebody can here infirm or confirm  ?
    Thanks

  • Mega 180 Pro Power Supply Bad - How do I order a new one? | SPLIT

    Good evening.
    I look for a moderator.
    I have a problem that I bought it it ebay-en single MSI Mega 865 Pro Media Center PC. But not good his power-supply unit. In Hungary there is not a power-supply unit to it.
    How I can obtain a good one

    Quote from: gnctiger on 17-July-10, 07:45:57
    Good evening.
    I am a Hungarian citizen.
    There is distributor in Hungary though here at us, but they do not have a component to it already.  Nearly MSI centre it is in Germany
    Well, call them back and ask where to ask for such since they don't have it,.
    Or to tell the PSU specifications
    Quote from: gnctiger on 17-July-10, 07:56:05
    Good evening.
    Stupid question, but I ask it.
    Is not for somebody into a machine like this his power-supply unit for sale?
    Buy/trade/sale is not allowed in a forum.
    You can try e-bay or such instead

  • Power supply needed for MS-7220 (Diamond Plus) and others.

     
    The following statement is taken form the K8B Diamond Plus Manual.
    For ATX 12V power connection, it should be greater than 18A.
    If I am interpreting correctly, the ATX 12V connector should have dedicated to it a minimum of 18A.
    My first, question is if the Power Supply has two or more rails, how do you know the power dedicated to the ATX 12 connector on the Power Supply?
    Second, if a +12V rail is not dedicated the connector, how do you know what is connected to each rail of the Power Supply?
    This maybe the source of why many are saying, they have more stable system performance when using single rail Power Supplies.
    I have tried eleven different manufactures to get more detailed Power Supply specifications, but no responses; today through February 1st is the Chinese New Year.
    Those of you running the K8B Diamond Plus, what are you using for Power Supplies and are you having any instability problem?
    One thing I did find curious was that going the manuals and in most all of the newer Socket 939 motherboards have this specification, but nothing in the motherboards specifications of on the MSI Web Site about this required and the are a lot of 500-600 Watt power supplies sold that do not meet this specification.
    The statement Total Wattage does not mean a thing has even more meaning to me now.
    Are we going to have to know the Current Rating of each cable on the output of a Power Supply now to insure we are purchasing the correct Power Supply?
    Roger

    Roger
    Ihave a Tagan 580w U22 with switchable dual/combined +12v rails and it is very stable,set it combined for 35a.
    Only thing to ponder was the 4/8 pin +12v/p4 connector,power supply has the correct split 2x4pin connectors so does the board but there is a little removable cover over 4 pins,so thinking MSI fitted it there for a reason I have fitted only one 4 pin connector,no problems as yet.
    Think you may well have a point re the 18a.
    I have just given my son my old sli platinum/cpu/heatsink/ram/vga card,this setup ran  250/11/4 @ 1.4v & ram 2.5 3 3 7 1.1 @ 2.75v with the Tagan.this setup now fitted in his case but with a dual 18a rail Enermax and he can't o/c stable to the old settings.Case has better cooling than the wavemaster it all came from.
    Dont think the enermax is bad just that it supplies the power a different way.
    Regards
    Rossoevo

  • Nightblade B85c power supply need help

    i have a nightblade b85c and the power supply is only 350w and i would like to change it but i carnt seem to get the old power supply out any help please?

    Please open all cover(up/left/right) and then remove everything(motherboard/HDD/ODD...).
    Then you can be replaced power supply.

  • MSI Mega PC 651 power on issues.

    Hello Fellow Mega pc owners.
    I have a mega pc barebones 651 which i have installed a p4 2.4 512 pc2700. and using the onboard
    I am having a problem where the pc portion of my mega pc will not power on.
    The hifi mode will jsut fine and works just fine.
    cds works, mp3s work.
    When i hit the power for the pc the power light comes on, and then i can hear hdd and cd rom drives power on and spin but no video.
    Heres what i have done so far.
    I tried to clear cmos. same thing.
    I have tried to unplug everything other then cpu, ram, still acts the same.
    There is no beep codes at all on this thing.
    But still the HIFI works just fine.
    Has anybody else had this problem?
    Can anyone please offer suggestions?
    Thanks for your time and help.
    Ben

    UPDATE: This is a barebones system i got.
    now can anyone who has a unit like this tell me if there needs to be a connection made to the system cn4  connection?
    if so what does this cable look like and where can it be found.
    I have checked and there doesnt seem to be any lose cables.
    and can some one tell where cn4  pin get connected to the front panel.
    there doesnt seem to be any connection to connect cn4.
    Please i would like to have this pc up and running.

  • Ac adaptor power supply needed

    I need heeeelp
    I have 5.1 PCWorks LX520 speaker , & it's ac adaptor doesn't work
    & I searched for alternatives for it put I didn't find any ,
    Its details :
    2 V , 200 Am ,,, 230 V
    it's the same as inspire models [2.1 & 4.1 ]
    I live in egypt , how can I get it ?

    i also had the same problem?and then after a bit of research i found that AC is not neccessary ! even if you provide it with dc voltage or some other transformer of 2 volt then also it will work.
    i have tested mine with my car battery aswell as the charger of remote control car (toy).
    remember positive and negative does not matter bcz the bridge rectifier installed in your speakers can easily pass dc current?of any direction.

  • Will this video card and power supply work on my computer? HP Pavilion p6213w Desktop PC

    I have a HP Pavilion p6213w Desktop PC, will this video card and power supply work on my computer?
    Video Card: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=8379339&sku=A455-0760
    Power Supply: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4668507&sku=C13-2511
    Any help is greatly appreciated, thanks.

    It is unlikely that the power supply will fit/work in your HP Pavilion p6213w Desktop Computer. Please consider the Corsiar CX500, CX500M, CX600, and CX600M for your power supply needs. These power supplies are the same physical size as the factory unit and are known to fit and work in most HP full-sized consumer desktop computers.
    There is a chance that the GTX 760 and other current generation video cards may not work in your computer. These newer cards typically require the computer to support the most current UEFI standards and many motherboards don't meet this criteria. Please know the return policy on any video card you purchase, in case it doesn't work. If the GTX 760 doesn't work, consider the GTX 650/660 Ti or equivalent AMD graphics card for your graphics card needs.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Sun V210 Server - No Power on Front, Yellow on Power Supply

    This morning the server shut off.
    There is no power to the front of the server at all, no lights.
    On the back, where the power is connected, the light is yellow.
    If I unplug the power, wait, plug it back in, it turns Green, but then after a few moments, turns yellow again.
    Is this a bad power supply?

    Yes, the power supply needs to be replaced.

Maybe you are looking for