Mega Sky 850 - Error

Have had this infernal thing for 2 days, first day ok, drifted on and off, then today start a scan and get blue screen then laptop restarts.
Reinstalled software and now I get an error message as soon as I start the software and have the usb plugged in. Then the system has to close.
Have loaded it onto my desktop and that works, but then so did my laptop until today.  Help me please!
Its the hpvr5.exe error that is being logged to microsoft

please read Moan Guide, Suggestions On Posting And Getting Better Answers and Getting Help With Random Restarts And Bluescreens. we need more information in order to help you

Similar Messages

  • Mega Sky 580 - Crashes

    I have problems getting the card to be stable. If I start and close the program several times my machine reboots with an "error caused by a device driver". If I just let Presto PVR run it crashes the application after some time.
    Actually we are 4 people who bought this device and all of us have these issues. This is BTW the Genesyslogic version.

    Hi Stu, :-)
    The problems I experience can be categorized in 2.
    1. I exit Presto and the computer just reboots. When booted again it reports: "error caused by a device driver".
    2. Presto crashes and I can send a report to Microsoft. If I start Presto again there is no picture. If I pull out the USB dongle and plug it back it works again.
    As written above I have some friends who also bought the Mega Sky. They are all experiencing similar issues. I tried the Mega Sky at work on my computer there and that machine is almost vanilla.
    I wrote down the specs and some of the applications installed here at home, that could have any influence. I had an episode where I recorded a program using EPG. Presto crashed after 10 minutes, but the recording continued and ended well. (Issue 2)
    Specs.
    Asus P4C800-E Deluxe v2.0 - BIOS 1024 (latest), P4 3.0E, 1GB OCZ EL DDR PC-4000 Dual Channel Gold.
    Club3D 7800GS - 256MB. I tried with both Forceware 81.21 WHQL and 87.25 beta. They give the same result.
    NVIDIA PureVideo Decoder 1.02.196
    Creative Audigy Platinum. Driver version 5.12.2.445
    Windows XP SP2 Danish - All updated.
    Windows Media Player 10.00.00.4019
    I have PowerDVD 6.0.0.2023 installed.
    My best guess is that the issue is caused by the Mega Sky driver and the graphics drivers.

  • MEGA SKY 580 (H.264 support)

    I have this MEGA SKY 580 TV tuner.
    There are 8 TV channels in DVB-T in my region. Some of them have MPEG-2 encoding, and some are in MPEG-4(H.264) encoding.
    I downloaded latest drivers for my TV tuner from your website, and also latest update for Presto! TVR from Newsoft website. Version 5.30.04.
    When I select those channels that have MPEG-4 encoding, I get an error saying - The video format in the current media is H.264. This video format is not supported and cannot be played.
    I contacted NewSoft regarding this question, and they said to contact Hardware manufacturer.
    They also said:
    "This is a limitation when using PVR 5.50 and earlier versions.
    We don’t provide a patch to support this video format.
    Versions 5.6 for DVB-T and later version will support this format.
    And PVR as part of a bundle software (known as an OEM version) for TV tuner devices.
    If vender does not have the request of the issue, we will not release."
    Is there a way to resolve this problem and watch those channels that are in H.264 encoding?
    I've submitted a support ticket about this in February, and haven't gotten any response.
    http://support.msi.com/index.php?mod=questions&dop=reply_list&question_no=57415

    Try some different TV software. Ever tried MediaPortal?
    http://www.team-mediaportal.com/

  • Remote control and MSI PC-DTV Mega Sky 580

    Hello,
    I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
    I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
    I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
    Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
    Microsoft XP SP2 with current updates.
    2x300GB
    1GB ram
    Intel D820
    Onboard graphics and sound
    Dust and dog hair arranged attractively around the box!

    Hi,
    Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
    So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
    It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
    I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
    They all work fine but I would prefer a complete set 
    I

  • MSI Mega Sky Aerial

    Hi just wondering if anyone knows if the MSI Mega Sky Aerial is weather proof.....
    please reply.

    Yes, i have coverage. I wrote, that with default aerial i have around 65/15 signal. I am few km (maybe 5km) from broadcaster (i found thiw word in dictionary, hope is ok) and i can see it (no obstacles in way).
    As i wrote, if i use default antenna, i have bad signal, so sometimes i have drop-outs and "colored squares".
    If i use any other antenna, signal is worst than bad, can't tune anything.
    Of course i tryed moving with aerial, every place when aerial can stand.. I am trying this around 3 months!
    I asked in some local forum, if anyone tested dvbt here. They answered to me something like this: yes, works perfectly.
    But noone have MegaSky 580 (some internal pci cards, pcmcia cards, some usb keys from pinnacle or hauppage or technisat or other), but few of them using same aerials, that i bought (smaller passive Technisat or bigger Technisat with ampfilier)!
    So, from my eyes looks like MegaSky 580 is "not very successful product".
    If you have any hint what other i can do, so say it. But i think i tryed anything.
    And i'm not saying about horrible software called PrestoPVR - "Blue screen of death" is every day when i trying to use it..
    I have one more thing. I found, that is two different models of MegaSky 580 (different producer or technology, different drivers, different sign).
    First is "DTV USB MINI" and second is "PC-DTV Receiver". I have "DTV USB MINI".
    If you don't trust me, look here (driver download): http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=624&kind=6
    Maybe is "DTV USB MINI" model crap and MSI started to produce new version with differend technology..
    Anyway, my MegaSky 580 is really unusable.
    (p.s. sorry for my bad english, i'm not a native english speaker)

  • Mega Sky 580 Antenna Adaptor

    I've recently bought a Mega Sky 580, which worked ok, but unfortunately I stepped on the antenna adaptor and broke where it connects to the unit, which means I now cannot get any reception.
    Can anyone tell me where I can buy a replacement adaptor, as I'ld like to be able to watch the World Cup!
    Tony
     :(

    How to contact MSI.
    try contacting the dealer who sold you the MegaSky, they may have one with a complete faulty unit they can "borrow"
    failing that, contact MSI UK, i believe they are very helpful
    How to contact MSI. or try emailing '[email protected]'

  • Mega Sky 580 no channels

    Hi
    Installed Mega Sky 580 and Presto program nicely but I cant receive any channels. The program doesnt find any channel, not even if I am outside with my laptop. Does the Mega Sky need an external roof antenna to work?????
    Tommy

    well i'm afraid i don't know anything about digital terrestrial TV in finland, but what i can tell you is to check you are actually in an area which is covered by a digital transmitter. also digital signals are different to analogue in that if your reception is poor or weak, analogue TV will appear 'snowy' or noisy, with lots of interference. because of its inherent nature, if your digital reception is weak, then you will receive no signal at all
    let us know how you get on

  • How to install BDA-drivers correctly to MSI Mega Sky 580 dvb-receiver

    Hi,
    I tried to use MSI Mega sky 580 dvb-receiver with DVBViewer program. It should work because both have bda-driver support. But DVBViewer says "No hardware found". I think the problem is that the bda-drivers of the MSI stick are not installed correctly. I have downloaded the newest drivers and installed them. I read in a forum that the bda-drivers must be installed separatelly in device manager. I tried but it didn't work. I have Windows XP pro, AMD athlon XP 2600+ and Asus A7N8X-E motherboard. Presto-player works well.

    I’m not sure what do you mean.
    The product I have is this: http://www.msi.com.tw/program/products/multimedia/mut/pro_mut_detail.php?UID=615
    And the drivers I used can be found here: http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=624&kind=6
    Actually I’m not sure which driver is the right one. Please ask if any relevant information is missing.

  • Mega Sky 580 MCE plus 2nd tuner

    Bought an MSI Mega Sky 580 USB DVB-T. Installed and worked OK with Presto PVR. Appeared in device manager as PC-DTV Receiver.
    Started MCE but unable to detect. Read plenty of threads with similar problem. Tried 1.5.0.1 driver patch and Presto 5.20.12 patch. Still not detected.
    Read about installing a second tuner which could cause first tuner to be detected. Found old Philips/Medion 7134 analogue card (rev3) and fitted. Installed with these drivers, http://support.pcworld.co.uk/1752
    Device Manager now shows Medion (7134) WDM Video Capture and Medion TV-Tuner 7134 Mk2/3
    Restarted MCE, detected tuner ok, scanned for digital channels and LiveTV working perfectly 
    Removing Philips card caused MCE to report 'No TV signal'  :(
    PC spec:
    Dell Dimension E520
    Core 2 Duo E6300
    1GB RAM
    MCE 2500 Rollup 2 preinstalled
    Radeon X1300 256MB

    So your saying you get both digital and free to air tv?

  • SOLVED!!! Sky Go Error Message t:6030/ c:4110 or similar error : SOLVED!!!!!!!

    After a lot of time and research I discovered that TEAMVIEWER was causing this error!!!!
    If you use  TEAMVIEWER and you uninstall it, you will probably solve your Sky Go errors like the above.
    I would now call on Sky to look at this and see what can be done to make Sky Go work on Computers running TEAMVIEWER.
    I understand the concern about re-broadcasting but in all seriousness , streaming content is unwatchable over teamviewer.
    Please, Sky, have a look at this.
    I use Teamviewer to remotely access my home computers when I am travelling.
    This year, "Logmein" withdrew their free service and a lot of people would have switched to teamviewer instead so maybe this accounts for the increase in reports of these problems with Sky Go.
    I would also call on the community to post on this thread if uninstalling Teamviewer or other remote access software solved their issue so we can see how many people this affects..........

    Also @wayne,If the above does not solve your issue either then have a think about ANYTHING at all that may be installed on your computer or connected to it that may have the ability to redirect the video stream. Temaviewer is software that redirects the video stream to another device so it could be any other software that has that capability. I guess it is possible , for example, that  VNC, RDP, GOTOMYPC  or similar could cause it.It's also possible (I'm guessing here) that something like a HDMI cable attached to the PC could cause it.Error number 6033 from the list below is why I twigged TEAMVIEWER was my issue ............... At the end of the day, there is an expansive list of errors below that can happen because of violations (percieved or otherwise)  of the digital rights management / copyright / copy protection. Sky go to huge lenghts to try and prevent anything from rebroadcasting their streams and the side effect of this can often be that innocent users end up with errors for seemingly unconnected reasons like having teamviewer installed or a HDMI cable connected to an external monitor etc.! As a complete aside, it is for that very reason I carry two phones with me. One has a stock version of Android running  and NO other software other than Sky Go on it.     My other phone I tweak as I like. The problem is that any "tweaking" with devices or installing other out of the ordinary software can often upset the Sky Go App on Android! It's much the same with a PC or laptop.  6000MediaElement failed to play the DRM-protected content.6001The individualization component software failed to download to the user’s computer. This error occurs when the MediaElement is in the IndividualizingMediaElementState. One possible reason for this error is that the Silverlight client cannot connect to the Microsoft Individualization Server.6002The license acquisition failed. This error occurs when the MediaElement is in the AcquiringLicense MediaElementState. One possible reason for this error is that the Silverlight Client cannot connect to the license server.6003The individualization component software failed to install.6004The installation of Silverlight on the client is out of date and needs to be updated.6005The processing of the file header failed. For example, the header might be mal-formed.6006License processing failed on the Silverlight client. This error occurs when the MediaElement is in the AcquiringLicense MediaElementState.6007The PlayReady License server allows the server developer to return an error that is specific to the service. For example, the server might return one of these errors: "You need to pay your bill," "The service is unavailable," or "You have exhausted your monthly stream count." The SOAP exception that is returned from the license server has additional data in the CustomData field that is added by the server. You need to write application logic in the Silverlight application to interpret this. These responses are primarily used when you implement a custom license acquisition (see Add Custom Logic later in this topic).6008The user disabled DRM in the Silverlight configuration settings of the client.6009The maximum for individualization attempts was exceeded.6010A DRM protocol error occurred.6011A DRM license acquisition URL override is required.6012A DRM license-acquisition redirect error occurred.6013The user's HW configuration has changed in a significant way and the DRM state is no longer valid.6017The user tried to acquire a license by using a stream (calling AcquireLicenseAsync; however, the stream is in unprotected content.6021The DRM system does not support the client OS.6023IBX service is not reachable. Some malware / spyware will block calls to *.microsoft.com so ensure that the machine is fully patched and protected.6030The license contains an unsupported license protection.6031The integrity of the secured video output connection has been compromised or lost.6032The secured graphics connection requires renegotiation but could not be renegotiated.6033A revoked High-Bandwidth Digital Content Protection (HDCP) device is attached to the video output.6034The graphics adapter or the driver has been tampered with.6035A new graphics connection was added during playback and playback was halted.6036Graphics device's driver certificate is invalid.6040The domain is full and does not allow the user to add any more clients to this domain.6041The client is not a domain member.6042The domain account identifier is unknown.6208DRM initialization failed - uninstall/reinstall of Silverlight should address the problem.

  • Mega Sky 580 unreliable!

    Hi,
    I got my MSI Mega Sky 580 when buying some books from another person so I can look at it this way: it was free.  The price I paid for this and the books items was worth it for the books alone, hence my logic it was free.  This makes me feel a lot better because I would be gutted if I had paid £30 or full price!
    I was going to buy the Kworld 310U which I may still do although it is £40 but if something doesn't work then being free has no benefit.  Does MSI read these forums?
    Anyway, yesterday it was working but today I have lost about 9 channels and have re-installed the software & drivers again. In fact I have spent more time installing and re-installing, reading forum messages over the last couple of weeks I have had this product then watching TV!
    Some points:
    a) I went to the Presto site and their reference to software shows a completely difference screen to mine.
    b) Under Control Panel, System etc my Mega Sky 580 is shown as: Digital TV USB Mini Receiver which according to all the links give various versions bat this one word for word>
    c) As mentioned I have done the driver bit to the point I have lost interest.   I used to have an Hauppauge TV card for my PC and this was perfect with pro software, features and reliability even after moving it form old pc's to new upgrades.
    Like some of the other people and posts I may start saving for the Kworld 310u or may be USB DVBT is not yet ready.  I have three setup boxes off of one aerial via a booster and they are superb and only cost £23 each.
    Well got that off my chest, phew.
    But thanks to all posts I have spent the last two weeks reading through.

    Quote
    a) I went to the Presto site and their reference to software shows a completely difference screen to mine.
    the software supplied with the MegaSky is not quite the full version of the PrestoPVR software on their website
    Quote
    b) Under Control Panel, System etc my Mega Sky 580 is shown as: Digital TV USB Mini Receiver which according to all the links give various versions bat this one word for word
    you want the drivers and software for the DTV USB Mini version

  • Mega Sky 580 Driver installation problems

    I seem to be having the same problems as alot of other people with the same product.
    I bought the mega sky 580 USB today and have spend the last 8 hours trying to get it to work
    My problem is that windows recognizes the device "USB 2.0 DVB_Adapter" (shouldnt this not be "DTV USB MINI" or "PC-DTV Receiver" and not Adapter?) i go to  install the drivers provided on the cd, but at the end of the setup it says that the device is not connected properly.
    I have tried the drivers on the MSI website and also tried some, if not all of the sergestions in other posts on this forum.
    Im starting to pull my hair out,
    please help before i go bald
    Thanks!!

    when you first connected the MegaSky, what did the 'Found New Hardware' bubble describe it as? if FNH identifies it as anything other than 'PC-DTV Receiver' or 'DTV USB Mini', then return to your retailer for exchange
    in your Device Manager, is the MegaSky listed with a (?) next to it?
    does your PC support USB 2.0 devices?

  • USB Mega Sky 580 Scanning Problems

    Hi.
    I baught the USB Mega Sky 580 from a local computer shop and everything installed correctly, I scanned for channels and no channels got picked up.. So i contacted the shop and they said to bring it back for a replacement as it might be faulty, So i got the replacement and installed it after removing the old install. Once it was installed i scanned for channels again and no channels was found again. I un-installed the driver and downloaded the ones from MSI website and re-installed, still got no channels on scanning.
    I've also installed microsoft patches/hotfix. I have tried all 6 USB ports on my computer and i've also tried a mains powered USB Hub, I have also looked through this forum for help and tried a few things and still no luck.
    I'm using the aerial out the back off my freeview box, i get between 90-100% signal on the TV.
    PC Specs :
    p4 2.9ghz
    1gb RAM
    Win XP Home SP2
    Any help on getting this too work would be grateful.
    Thanks.

    Quote from: Stu on 12-September-06, 02:39:51
    are you using Windows XP MCE2005, or the bundled PrestoPVR software? if you are using PrestoPVR, have you installed the correct patch for your version of the hardware
    I'm using PrestoPVR (the MCE drivers on the link above) on Windows XP Home SP2 as all other drivers fail to scan for channels.
    Yes i've tried the patches. Still can't get this thing working :(

  • MEGA SKY 580 INSTALLATION PROBLEM

    I recently bought a Mega Sky and have problems with Installation. When loading the usb drivers I get a device not available message. It is visible in the Safely Remove Hardware window as Sample Software BDA Capture Device GL1208 - whatever that is. I've tried this on two separate laptops. My main one is a Dell Latitude D600 but I've also tried it on a new Dell Inspirion M65 with the same result.
    Stangely the Presto PVR software installs and runs but the only device available when I try to scan for channels is Sample BDA Tuner Filter GL1208, which I guess is not what I need.
    I've tried multiple reboots, uninstall-reinstall etc etc but nothing seems to make any difference

     
    I removed all codecs first.... then i installed all directshow filters i found... (nimo etc etc) and guess what!!!!!
    ITS WORKING!!!!!!!!!!!!!!!!!!!!!!!! YIIIIIIIIIIIIIIIIHAAAAAAAAAAAAAAAAAAAAA!!!!!!!!!!!
    Thnx for patience and especially for advises. I really am a glad man now!

  • EDI X12 850 : Error processing edi file

    I am getting following error:
    Segment ISA(Interchange Control Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 24777
    It appears to be delimater related error but when I look at the logs and compare configruation with datafile all delimater seems to be ok.
    Here is how ISA looks in file:
    ISA~00~Authorizat~00~Security I~01~Interchange Sen~01~Interchange Rec~070824~2047~*~00403~273384808~0~I~:
    GS~PO~Application Sen~Application Rec~20070824~20475500~4028443~T~004030
    ST~850~74632~Implementation Convention Reference
    log:
    oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
    2007.08.24 at 21:26:25:170: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2007.08.24 at 21:26:25:170: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@234265
    2007.08.24 at 21:26:25:172: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
    2007.08.24 at 21:26:25:173: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
    2007.08.24 at 21:26:25:247: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2007.08.24 at 21:26:25:247: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@dc1f04
    2007.08.24 at 21:26:25:248: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:reset Enter
    2007.08.24 at 21:26:25:249: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:reset Leave
    2007.08.24 at 21:26:25:256: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2007.08.24 at 21:26:25:256: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@1784427
    2007.08.24 at 21:26:25:258: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
    2007.08.24 at 21:26:25:259: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverQual, val = [01]
    2007.08.24 at 21:26:25:260: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [01]
    2007.08.24 at 21:26:25:261: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderID, val = [Interchange Sen]
    2007.08.24 at 21:26:25:261: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [Interchange Sen]
    2007.08.24 at 21:26:25:262: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverID, val = [Interchange Rec]
    2007.08.24 at 21:26:25:263: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [Interchange Rec]
    2007.08.24 at 21:26:25:264: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = Standard, val = [X12]
    2007.08.24 at 21:26:25:264: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [X12]
    2007.08.24 at 21:26:25:265: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeControlVersion, val = [00403]
    2007.08.24 at 21:26:25:266: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [00403]
    2007.08.24 at 21:26:25:267: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Interchange]
    2007.08.24 at 21:26:25:268: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderQual, val = [01]
    2007.08.24 at 21:26:25:268: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [01]
    2007.08.24 at 21:26:25:271: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
    2007.08.24 at 21:26:25:271: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
    2007.08.24 at 21:26:25:272: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = ecsFileKey
    2007.08.24 at 21:26:25:304: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = 7F0000011149AA05FE5000001A0D86B0
    2007.08.24 at 21:26:25:329: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsOptFileBlob
    2007.08.24 at 21:26:25:330: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsFileBlob
    2007.08.24 at 21:26:26:217: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getStream Enter
    2007.08.24 at 21:26:26:218: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getStream Leave
    2007.08.24 at 21:26:26:220: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
    2007.08.24 at 21:26:26:221: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
    2007.08.24 at 21:26:26:466: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber sName = Interchange, controlNumber = 273384808
    2007.08.24 at 21:26:26:467: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber return = true
    2007.08.24 at 21:26:26:477: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
    2007.08.24 at 21:26:26:478: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = MEDCO
    2007.08.24 at 21:26:26:479: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
    2007.08.24 at 21:26:26:480: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {320A953A-52AA-11DC-ABED-00080DB4C9C9} position = 0
    2007.08.24 at 21:26:26:481: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
    2007.08.24 at 21:26:26:481: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2007.08.24 at 21:26:26:482: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@c272bc
    2007.08.24 at 21:26:26:483: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
    2007.08.24 at 21:26:26:484: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupReceiverID, val = [Application Rec]
    2007.08.24 at 21:26:26:484: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [Application Rec]
    2007.08.24 at 21:26:26:485: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupVersionNumber, val = [004030]
    2007.08.24 at 21:26:26:486: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [004030]
    2007.08.24 at 21:26:26:486: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Group]
    2007.08.24 at 21:26:26:487: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupSenderID, val = [Application Sen]
    2007.08.24 at 21:26:26:488: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [Application Sen]
    2007.08.24 at 21:26:26:488: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
    2007.08.24 at 21:26:26:489: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
    2007.08.24 at 21:26:26:490: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = ecsFileKey
    2007.08.24 at 21:26:26:491: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = 7F0000011149AA05FE4000001A0D8690
    2007.08.24 at 21:26:26:491: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsOptFileBlob
    2007.08.24 at 21:26:26:492: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsFileBlob
    2007.08.24 at 21:26:26:519: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
    2007.08.24 at 21:26:26:520: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
    2007.08.24 at 21:26:26:524: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber sName = Group, controlNumber = 4028443
    2007.08.24 at 21:26:26:525: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber return = true
    2007.08.24 at 21:26:26:527: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
    2007.08.24 at 21:26:26:528: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = MEDCO
    2007.08.24 at 21:26:26:529: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
    2007.08.24 at 21:26:26:530: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {320AAAAC-52AA-11DC-ABED-00080DB4C9C9} position = 0
    2007.08.24 at 21:26:26:530: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
    2007.08.24 at 21:26:26:531: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2007.08.24 at 21:26:26:532: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@1fac852
    2007.08.24 at 21:26:26:533: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
    2007.08.24 at 21:26:26:533: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = TransactionID, val = [850]
    2007.08.24 at 21:26:26:534: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [850]
    2007.08.24 at 21:26:26:535: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Transaction]
    2007.08.24 at 21:26:26:535: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
    2007.08.24 at 21:26:26:536: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
    2007.08.24 at 21:26:26:537: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = ecsFileKey
    2007.08.24 at 21:26:26:538: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = 387B86A5852EE725E040007F010010F9-274-1-3
    2007.08.24 at 21:26:26:538: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsOptFileBlob
    2007.08.24 at 21:26:26:539: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsFileBlob
    2007.08.24 at 21:26:33:462: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = xsdFilePath
    2007.08.24 at 21:26:33:491: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
    2007.08.24 at 21:26:33:498: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
    2007.08.24 at 21:26:33:499: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
    2007.08.24 at 21:26:33:582: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber sName = Transaction, controlNumber = 74632
    2007.08.24 at 21:26:33:583: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber return = true
    2007.08.24 at 21:26:33:999: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
    2007.08.24 at 21:26:33:999: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = MEDCO
    2007.08.24 at 21:26:34:000: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
    2007.08.24 at 21:26:34:002: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {320AB3F8-52AA-11DC-ABED-00080DB4C9C9} position = 0
    2007.08.24 at 21:26:34:002: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
    2007.08.24 at 21:26:34:311: Thread-12: B2B - (DEBUG) iAudit report :
    Error Brief :
    5016: A mandatory data element is missing.
    5016: A mandatory data element is missing.
    5016: A mandatory data element is missing.
    5016: A mandatory data element is missing.
    Message was edited by:
    [email protected]

    Hello,
    Can you please do the following.
    1. validate your transaction set of the inbound payload against the transaction set ecs.
    2. Make sure the delimiter is configured in the B2B Document Protocol Parameters as per the incoming payload.
    Let us know.
    Rgds,Ramesh

Maybe you are looking for

  • Buying a new iMac; can i use my eMac as a second display?

    Hi, I'm just about to buy an iMac (intel core 2 duo), probably 17" 2 GHz with some extra RAM. I currently have an eMac, and now I wonder, is there any way to use it (the eMac) as a second display for the iMac? Obviously, the eMac doesn't have any vid

  • Is it possible to create APEX user in background?

    Hi experts, I have a page to create new user with the following items in an application: P1_USER_ID P1_EMAIL P1_PASSWORD It is using Automatic Row Processing (DML) to insert these to PEOPLE table. When submit it above in the same time, I would like t

  • Grant select privilege to specific columns on a table to user in Oracle 9i

    Can anyone tell me how to grant select privilege to a user for specific columns in a table? I have tried the following statement GRANT SELECT (EMP_ID) ON EMP TO USER1 But it's not working and I am getting this error "Missing ON Keyword". Please anyon

  • Using http live streaming to stream data from a Webcam

    JavaFX 2.2 includes support for http live streaming: http://en.wikipedia.org/wiki/HTTP_Live_Streaming How could one create a http live stream from a Webcam and thereby enable a JavaFX application to view and hear the Webcam video in realtime?

  • Unable to download an app!

    I'm having difficulty downloading an app...when I attempt to sign in, it keeps saying that my apple id or password are incorrect, when they are not.  Not sure what to do???  I've tried changing my password, however that hasn't worked.