Mega Stick 256MB (USB 1.1)

I bought the Mega Stick but I don't have the CDRom. Do I need it when I use Windows XP as operating system? My system recognises the Mega Stick when I put it in my USB, but I don't see it on my screen or something. When I copy files from a CD to the player I can't find them and I can't see the player writing.
Please help

If u plug in the stick (and switch it on) it will present itself as a driveletter e.g. E: Just copy the MP3 or WMA files to that drive.

Similar Messages

  • MSI MEGA Stick 256 (usb 1.1) for Thai Font

    Dear All
           Can I setup thai font to my MEGA Stick?...Any one can do it or Please suggest any way to solve my problem
    thank you  for your instructions

    i think you would be better posting this in the Other MSI Products forum, this one is for the Mega PC Barebones systems
    good luck!

  • How change an encoder in mega stick 256 usb 2.0 ??

    inside a file "resource.bin" I've found some hiden futures.
    For instance:
    Encoder:
    - ADPCM
    - MS ADPCM
    - IM ADPCM
    - PCM
    Bits\Sample:
    - 4
    - 8
    - 16
    - 24
    So, how can they be activated ??
    best regards

    I've found.
    In settings.dat should be changed the following bytes:
    000000ED:  00  - for Mic
    000000FF:   00  - for FM
    00000111:  00  - for Line-in
    when:
    0 - IMA ADPCM
    1 - Microsoft ADPCM
    best regards

  • Mega Stick Radio Problems

    Ok, I got the mega stick 256mb. I tried updating the firmware using my comp, however, it didn't work (I think its because I have an nforce2 chipset).  Luckily I was able to revive the player with my bro's comp, and now it at least turns on.  However, now my radio will only go from 79.5mhz to 90.5 mhz, while before it went from like 89 to 108 and now I cant listen to any stations.  Anyone have any idea?

    I had exactly the same problem and found out it was a firmware problem.
    It has something to do with your Mega Stick being the Japanese version so the FM is 75 to90.5Mhz.
    Update your firmware so that FM will receive up to 108Mhz. http://www.msi.com.tw/program/support/firmware/frm/spt_frm_ia_list.php
    Hope this works for you - It did for me
    Eric

  • USB (Mega stick), sound output and PS2 problems

    ==USB problem==
    The MSI MEGA STICK do not work with the MSI K7N2 Delta ILSR.
    When you plug it, its recognized, you can write on the MEGA STICK, delete files but cannot READ from MEGA STICK. It freezes while display "reading". I have tried on lots of PCs. Only my MSI motherboard do not work properly. The same problem with my 2 MEGA STICK. And i had tried Windows XP and Linux. Same problem. Others USB devices works fine. Even card readers...
    ==PS2==
    My optical wireless mouse do not works properly. When i turns on the computer, it works ok. If i restart, do not work. Restart again, works. And go on... Only this mouse. Others MB works fine.
    ==Sound Output==
    And also with my sound output. The eletrical one (coaxial).
    It do not work with my 5.1 home system. It works fine with my old SB Live. It gets worse when i use my tv output from my Radeon 9100. It only works SOMETIMES when the tv output is not plugged in.
    Thanks to all that could help me.

    Mega stick.
    have you updated the firmware ?
    No. It Freezes before being able to update. Also the update do not tell about solving this problem
    "Firmware version: 2.05
    Update items
    1. Improve delete MP3 and voice files function.
    2. Fix device will restart while forward/backward Voice file."
    you do know that windows xp does not come with usb2 drivers.
    sp1 does and you have to install them yourself.
    go to device manager and delete all usb entries and reboot and windows will install the usb2 drivers next time you boot.
    if you get a slipstreamed version of xp you dont need to do this as it installed usb2 drivers rightaway.
    slipstream means a xp disc with sp1 on it.
    My XP cd is already SP1. Also tried on BIOS to use only USB 1.1V
    PS2.
    tried to use the other ps2 contact ?
    No. Could i use the keyboard PS2 to plug the mouse?
    SOUND.
    this is not my area but it could be a good idea to post what the equipment is.
    have you tried the latest drivers from http://www.nvidia.com ?[/quote]
    Its a brazilian brend. You wont know. CCE. Its works fine with DVDs, my old SB Live! and others. Only with my K7N2 do not work properly. Its an AC3 decoder. The problem gets worse when i use the Radeon 9100 tv out.
    Look like the problem on this thread.
    https://forum-en.msi.com/index.php?threadid=29572&sid=&hilightuser=26427
    This is my old thread. Never solved. :-(
    https://forum-en.msi.com/index.php?sid=&postid=319195#post319195
    When i updated the BIOS, it got even worse. Not even with the tv output unplugged it never worked anymore...
    Its very disapointed to buy an expensive MB and realized that it do not work properly...
    Thanks yo your help.

  • Mega Stick 128

    Hi!
    Last week i bought   Mega stick128 MP3  and now I have a few problems with the connection to usb of my computer.
    I have Windows XP Professional service Pack 1 with driver USB 2.0 but when I put the stick in the USB and I try to explore my folder all system stop and I to turn off the pen from usb port. I try also with my notebook with Windows2000 and I have not any problem, all is fantastic.
    So I decide to install the driver for windows XP from your internet site, but nothing is change. The firmware of the stick  is the last one 2.5 European.
    Can you help me, I need a special patch or there is a no compatibility between the stick and windows XP professional.
    I don’t think that is a problem of the stick because with windows 2000 I haven’t problem, but I don’t think also that is a problem of USB port of my computer because I use another  flash stick without a problem.
    Last information ,when the stick stop the message on the display in reading!
    Please Help me
    Thank you.

    look, when you make these replies saying "nothing changed" will not help. what did you do, step by step, and what happened when you tried it? so you went to a comp in which the mega stick didn't hang windows. you right click formatted the mega stick "x" drive using fat or fat 16 (i used fat) and not fat 32. did you uncheck the quick format, or did you leave it checked? please explain yourself. how do i know if you understood what i was asking or if i even explained it well enough? either one has to be the case as you are the only one in which this technique has not worked for.  

  • MSI Mega Stick 1 problem with Nforce 2? Look here

    I love this stick, so I didn't give up to find a solution. With SP 1&2 it freezed when there is data communication. Now it's gone how?:  
    Flash the latest firmware of Mega Stick II to your Mega Stick I
    After installing MSI driver, it freezed again

    Actually i am having this problem also. Msi mega 256mb mega stick is not compatible with abit mobo NF7-s as i had tried to use it with other computers which is using nf7-s mobo also. But it comes to normal when i plug it into my my housemate computer which is not using nf7-s mobo. I am wondering of how to solve this problem for long long time already. Can anyone tell me how to solve it? Even i had updated the firmware to the newest but the problems still occur.

  • Mega stick, work or not ?

    What is wrong whit this mega stick's.
    I saw that all with firmware of 2.xx have same problem
    when you put mega stick in Win XP it's "READING", what is reading ?
    When you install stupid driver no more working of mega stick,
    on same computer but without driver works OK. WHY ?
    How to remove driver ? uninstalling not give result ?
    IS THERE ANY SOLUTION OF THIS OR
    TO TAKE HAMMER AND DESTROY IT ?
    P.S. Hard words, but where is the support ?

    I am using a Megastick having the following versions --> Boot Manager : 2.412.001 USB Mass Storage / Player / Resource Manager  :2.040.000. And I am using Windows XP Pro + SP1 , and everything works fine for me. I didnt install any drivers. Works with XP default drivers.

  • Msi mega stick 1 128 error flash

    I had update my bios mega stick but I had occured an error.
    now when I connect the stick in usb port the pc wrote "usb not supported" the display is off.
    help me please

    no. it's said "usb unrecognized".

  • Mega Stick 520 can transfer at 480mbps?

    The MSI Mega Stick 520 1GB can transfer at USB 2.0 HIGH SPEED 480 mbps????
    Thanks!!!

    Only 3174 kB/sec reading and 2185 kB/sec writing.     
    Benchmarked with Sandra 2005.
    Results:
    SiSoftware Sandra
    Benchmark Results
    Combined Index : 649 operation(s)/min
    Endurance Factor : 36.0
    512B Files Test : 758 operation(s)/min
    32kB Files Test : 743 operation(s)/min
    256kB Files Test : 463 operation(s)/min
    2MB Files Test : 75 operation(s)/min
    64MB Files Test : 3 operation(s)/min
    Results Interpretation : Higher index values are better.
    Performance Test Status
    Run ID : XANDER on Jueves, 17 de Noviembre de 2005 at 02:35:40 a.m.
    SMP Test : No
    Total Test Threads : 1
    SMT Test : No
    Dynamic MP/MT Load Balance : No
    Processor Affinity : No
    512B Files Test
    Read Performance : 28264 operation(s)/min (236 kB/sec, 1x)
    Write Performance : 327 operation(s)/min (2790 bytes/sec)
    Delete Performance : 263 operation(s)/min
    File Fragments : 1.0
    Combined Index : 758 operation(s)/min
    32kB Files Test
    Read Performance : 5119 operation(s)/min (2730 kB/sec, 15x)
    Write Performance : 276 operation(s)/min (147 kB/sec, 0x)
    Delete Performance : 713 operation(s)/min
    File Fragments : 1.0
    Combined Index : 743 operation(s)/min
    256kB Files Test
    Read Performance : 731 operation(s)/min (3119 kB/sec, 17x)
    Write Performance : 253 operation(s)/min (1079 kB/sec, 6x)
    Delete Performance : 652 operation(s)/min
    File Fragments : 1.0
    Combined Index : 463 operation(s)/min
    2MB Files Test
    Read Performance : 93 operation(s)/min (3174 kB/sec, 18x)
    Write Performance : 45 operation(s)/min (1536 kB/sec, 8x)
    Delete Performance : 407 operation(s)/min
    File Fragments : 1.0
    Combined Index : 75 operation(s)/min
    64MB Files Test
    Read Performance : 3 operation(s)/min (3277 kB/sec, 18x)
    Write Performance : 2 operation(s)/min (2185 kB/sec, 12x)
    Delete Performance : 175 operation(s)/min
    File Fragments : 1.0
    Combined Index : 3 operation(s)/min
    Endurance Test Status
    Operating System Disk Cache Used : No
    Use Overlapped I/O : No
    Test File Size : 32MB
    Block Size : 512 byte(s)
    File Fragments : 1
    Endurance Benchmark Breakdown
    Repeated Sector ReWrite : 143 kB/s
    Sequential Sector Write : 394 kB/s
    Random Sector Write : 5 kB/s
    Drive
    Total Size : 993MB
    Free Space : 474MB, 48%
    Cluster Size : 16kB
    Performance Tips
    Notice 5901 : 1x=176kB/s; As some device makers use 1x=150kB/s exercise caution when comparing measured vs. published ratings.
    Notice 5008 : To change benchmarks, click Options.
    Notice 5004 : Synthetic benchmark. May not tally with 'real-life' performance.
    Notice 5006 : Only compare the results with ones obtained using the same version!
    Notice 5207 : Consider using the File System Benchmark for non-Flash devices.
    Notice 5900 : Endurance factor can only be used on the same type of device (SLC or MLC).
    Tip 11 : Use the 'Switch Chart Type' button to switch between Detailed and Combined charts.
    Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

  • MSI MEga Stick 1 Nforce Solution

    Hi, firts my stick didn't wordk at all at my Abit NF-S 2.0, when there is datacommunication Mega Stick freezed. Now it's working fine; my solution is no SP1 and bios> disable USB 2.0 compatible devices and select only use 1.1. I am happy now

    i think you would be better posting this in the Other MSI Products forum, this one is for the Mega PC Barebones systems
    good luck!

  • Mega stick 511 (without fm) cannot connect

    My Mega Stick 511 (Without FM) was not found by my system.  I couldn't found "Removable Disk(H:)" in "My Computer" after I connected Mega Stick to my USB port.  However, "CONNECTED" text was shown on Mega Stick LCD although there was nothing shown on "Safely Remove Hardware".
    Musics already saved played well.  I could listen to musics that I copied to Mega Stick last 2 week ago.  All other functions are ok.  But, I cannot copy new mp3 because there is no "Removable Disk(H:)" appear in "My Computer"
    Please Help me.

    Yes, I have tried all USB port, nothing work.  I don't think this is not some USB port problems of the computer because other devices are still running functionally on these ports.  I have tried this mp3 player on 2 computers.  One is on my PC and one is on Laptop.
    Thanks for your reply.

  • Error update firmware mega stick I

    I recently got a Mega Stick I
    After I installed the software, I found the update program.
    I clicked on start update firmware,  but the update program faild, and couldn't finish.
    Mega Stick now complety dead.
    Help me please??
    Windows 2000 and XP no found!!!!!! ( device USB unknow )
    Download program repair???? where???
    Cristian Infante

    Sometimes it's better to read the entries here first, before posting *g*.
    Solution is very easy. Remove battery from Mega-Stick. Connect to USB while holding the PLAY-Button. Windows will find now a device called like recoverybla. Install the driver from the original MSI-CD. Now you can do a upgrade with a new firmware ... And ... it works ...

  • Mega Stick 511 problem

    I've just bought a Mega Stick 511 and right now it's making me want to do this  . I'm running Windows Xp (although the manual seems to be for 98se users) and everytime I go to the device manager to look for the driver Player Recovery Device Class, it's not there although this- MSI MS-5511 USB Device- is listed under disk drives. I've downloaded the updated firmware and drivers from the MSI website and I'm following each step but this just keeps throwing me for a loop. I don't think it's a connection problem because the LCD screen on the player shows that it's connected. So if anyone out there has any clue how to fix this and then proceed to tell me how to actually load MP3 files onto it (because even that I'm sure I will stuff up), please please help me.

    Quote from: nozzle on 01-September-05, 22:18:11
    All,
    The problem has been "sorted" for me. After speaking with the very helpful Alick in MSI support, he pointed me to the right firmware for my MS5511 1GB Megastick:
    http://www.msi.com.tw/program/support/firmware/frm/spt_frm_ia_detail.php?UID=607
    It's the one called "MEGA STICK 511 Firmware" not "MEGA STICK 511 USB2.0 without FM Firmware" (what a horrible website!) and it's version 002.001.009.
    Still the annoying 'This device can perform faster' message - but it's connected as USB2.0 full-speed and not USB1.0 slow-speed, meaning you can fill up the 1GB in about 20 minutes, as opposed to several hours.
    I compared Alick's results using HD Tach (http://www.simplisoftware.com/Public/index.php?request=HdTach), and got the following results:
    1. A USB1.1 device will read at around 0.8 MByte/s
    2. My MS5511 device will read at around 0.9 MByte/s (USB2.0 full-speed's theoretical max is around 1.5MByte/s)
    3. A USB2.0 high-speed memory-stick will read at around 9.0 MByte/s (USB2.0 high-speed's theoretical max is around 60 MByte/s
    4. My (slow) hard disk will read at around 30 Mbyte/s
    5. A really good hard disk on a fast PC will read at around 130 MByte/s
    The real problem I have is that MSI are marketing their USB2.0 device as if it's a decent speed, whereas it's only slightly faster than USB1.1. It takes me 23 minutes to fill it up, which is way too long.
    Anyone else finding their Megastick any faster?
    After upgrading my firmware to 3.000.006 I have got the same problem I get the 'This device can perform faster' message' but this was not the case before the firmware upgrade when I had 2.0. Also with the old firmware I did almost filled my stick and I didn't timed it but I think it could take about 10 minutes.
    I have the MSI MEGA Stick 511 - Lite, 256M and it has no FM radio. Should I then not use the firmware listed as wothout FM?

  • Mega stick firmware problem

    i had the mega stick 511 with the firmware version 2 and i updated it to version 3 and it stop working. now when i plug it into the pc it won't even detect it or recognize it to undo the updated version 3. what can i do so it will detect it, once it detected it as smp3 device but when i tried to undo the updated version it appeared an error window. what can i do?!?!?!

    FINALLY, THE SOLUTION
    I have a brand new Megastick 511 USB 2.0 without FM, and I could get version 3.x firmware update done.
    My PC config is...
    ABit KV8 Pro Motherboard,
    512MB kingston RAM,
    Athlon64 2800+,
    OS Win XP SP2 with every single update released,
    but frankly, I don't believe this problem has anything to do with machine configuration, USB or OS issues. It's merely a question of doing the right thing. Of course, I'm assuming your USB is really 2.0 and you downloaded the right firmware and unzipped it to the MS-5511 folder, as stated in the manual.
    Ok, folks. After having this very same problem for a few days, I finally figured it out. Yeah, I wanted this playlist feature this bad, and it's worth the price.
    Problems were...
    1- Device was not recognized as a USB 2.0 device, no matter the USB motherboard drivers were installed;
    2- As soon version 3.x firmware updates were done, I got the old 'deadbrick' effect - oh, yeah, no lights or sounds out of the brand new player - which could be reversed with the old firmware, the one supplied with the CD.
    What I did to have the playlist feature was...
    1- Took the battery OUT;
    2- Using the cable supplied, I pressed and held the play/pause button and kept it pressed until procedure was completed;
    3- Inserted the cable in a USB;
    4- Windows showed the old 'hey, this device could be faster, blah, blah' message - just ignore it, as I did!
    5- Go to the MSI MS511 MEGA STICK Update program;
    6- This is very important... at this point, it would be nice if the software could recognize the device, but IT DOESN'T! You will get a message saying 'Media state not started' or something like this after quite a while waiting. This mean it won't show your current firmware version! Once again, ignore it!
    7- Well, since the 'start' button was there, I clicked on it, AND I WAS AMAZED TO SEE THE UPDATE BEING DONE! Ok, I didn't wanted to format the device, as it was full of good music, but even unchecking the format option, the software keep saying this had to be done in order to upgrade the firmware - a fair price;
    8- As all the copying and writing and verifying processes were done, I knew procedure was over, as the new 3.x firmware version was showing, and I could finally copy more tunes into my 511-now-with-playlist device! Only at this point I released the play/pause button.
    Now, when I connect the 511 to the PC, Windows continues saying the device could be faster, but the Update software recognizes it immediatly! And for 512MB of stuff, it takes around 12min to transfer - as it did before - just in case you wanted to know.
    Enjoy, my friends!

Maybe you are looking for

  • Help with animated gif background once opened in Photoshop c33 extended

    I often work with animated Gif's and a adding doggies etc to the top layer. I am having a problem with animated Gif with (existing transparent) background when saving from the web and opening in Photoshop cs3 extended it is changing the background to

  • Reports  distribution in reports 10g

    I am making the distribution file whose content are as follows in tne group filter dest_1: desname=c:\\_.pdf_ destype=file desformat=pdf level=report dest_2: desname=HP LaserJet 4 Plus destype=printer desformat=bitmap copies=1 level=Report But when I

  • Subscriber After Effects CC 2014 has the right to license the previous After Effects for free?

    I need license the After Effects CS5 for professional use, why do I need create templates for every type of user of After Effects, from CS5 to the CC. I know there's no way to sign Ae CS5 license, then Ae signing CC will have the freedom to also use

  • Profit center Validation

    Dear All, I have a requirement in which suppose in FB60, I have multiple line items then the system should not allow me to post multiple line items into distinct profit centers. If line litem 1 is posted to profit center "1000" System should not allo

  • Accessibility in Chat Rooms

    I use AVChat on my website for my blind members.  I can get them into the room but they need to "Allow" or "Deny" camera and microphone Access in Flash Player Settings. Apparently their screen readers cannot find the "Allow" or the "Deny" buttons. I