Mega View 588 problem! (blank screen)

Hi.
I just got a new Mega View 588, and I have already one big problem. When I was playing in settings I accidently pressed on "Software upgrade" or something like that. Something was displayed on the screen, but I forced it to power off.
Now, when I'm trying to start my Mega View 588, I can only see a blank screen - no sound, no picture. I've tried the System Recovery - didn't work. The battery is charged, the battery led is lit. I can connect it to my PC.
If anyone know how to fix it, please help me. Thank you in advance!

If the PC can detect for 5588, I have two solution for your reference, we can simulate your MS-5588 that have screen situation to update software or connect TV by AV terminal and press LCD/TV button on the remote control to complete the procedure to update the software.
Solution1:
You must follow below procedure to do: (no screen status)
1.Please download the latest firmware and unzip!!(http://www.msi.com.tw/program/support/firmware/frm/spt_frm_ia_detail.php?UID=616)
2.Copy this unzipped .rar system folder's files, replace system folder's files to your MEGA VIEW 588
3. When you boot up, after wait for a moment, stir the above key one time and press “enter” button.
4. Stir the right key four times and stir the below key two times, then stir the right key one time, last stir the left key one time.
5. After stir the left time, please press “enter” button.
6. Please wait in a few minutes (about 3 minutes), and survey your MS-5566 whether have any action/motion.
Please try again!!
Please note: If you can’t see system file of MEGA VIEW 588, It is setting hidden file, Please enter OS “control desk” and enter “select folder” and enter “survey” to choose "display all files and folder".
If solution1 couldn’t solve your issue, please try to solution2 again!!
Solution2:
Please do according to firmware update procedure of the following: (use of the remote control)
1.Please download the latest firmware and unzip!!(http://www.msi.com.tw/program/support/firmware/frm/spt_frm_ia_detail.php?UID=616)
2.Copy this unzipped .rar system folder's files, replace system folder's files to your MEGA VIEW 588
3. Reboot, please connect “AV.out” to TV by AV terminal and press LCD/TV button on the remote control.
4. Pressing enter in “setting” position, go to “info” and select to “update software”.
5. After enter to “update software”. will show ”confirm”.
6. Choosing “yes” and press enter button begin update.
7. The TV will show the word “waiting reset”, after show the red, green and blue square grid in order, the system will automatic rebooting, update success!
Please note: If you can’t see system file of MEGA VIEW 588, It is setting hidden file, Please enter OS “control desk” and enter “select folder” and enter “survey” to choose "display all files and folder".

Similar Messages

Mega View 588 Problem

Within a week of purchase, my 588 was freezing. Then, i ran the System Recovery using the CD provided with the player. After that, it was working fine. But, after i ran the system recovery, wmv files are not playing now. I even updated the firmware(ver 1.0.26.xx or something) available in the msi website....even then also, the wmv files are not playing......Before this problem, wmv files converted with the provided video vault software were working in this player. After i ran the system recovery, only wmv 800kbps files are playing. Files converted as wmv 600 kbps and 500 kbps are not playing. Before i ran system recovery, all wmv (800, 600 and 500 kbps) files were playing properly.
Any suggestions how to resolve it????
Why the player was freezing? Is there a problem with the harddisk or the software?
what should be the latest version of the firmware...in my player, the software version is shown as 1.0.26 and firmware version as 81.

Thanks for the response. But, I don't find the firmware version 82 anywhere in the website. I only do find the Software update(1.0.26.xx) in the MSI website...That is not the firmware update..... Do you know the location where i can get this firmware update(ver 82).....Can you please let me know this location?
Then, regarding this freezing problem....I tried to delete one avi file in 588...it was showing the "WAIT" text in the screen and it was just freezing for around 12 minutes. Then, it was not responding to any buttons in the player. Even, force power off was also not working....then, i had to remove the battery to switch off the player. When i switched on the player after that, it was just showing the First screen as "MSI My Style Inside" and freezes.....Then, i performed the system recovery...
Before System recovery, i actually converted one of the wmv file downloaded from the internet using video vault(medium quality, 600 kbps)....it was playing fine....

Mega View 588 stops playing video after 1Gb

I have recently started using Slysoft's CloneDVD Mobile to make DivX files of DVDs. So that I can play the DivX onto a TV I have chosen a large picture size. This has made quite large files, greater that 1Gb.
Playing these large files on Mega View 588 works fine until 1Gb of file has been read, then the player just aborts.
example: 1hr34min film is converted to 1.6Gb file. The film plays but then stops after 1hr. This equates to about 1.02Gb.
example: 1hr50min film is converted to 1.14Gb file. The film stops at 1:30. This equates to 1.02Gb.
Both films play to their ends on a PC.
I am using latest firmware, 1.0.26.1.
Is this correct behaviour?

Quote from: Tiresmoke on 30-June-06, 12:14:39
I will see what I can find that may be bigger. Not sure what I have to play with ATM.
yeah im not sure either so will have to look for something bigger to reproduce the problem.

Rubish mega view 588 and webcam

I purchased the Mega View 588. It is not working at all. After swapping, the quality is !! Then ask for another swapping or help. The technician this is the normal! FXXX. what this. Also the Web cam 370i, the colour is funny and not very nice. Do not purchase those! I can not believe MSI is going to be a doggy manufacturer.

if you had looked through the other posts here, you would have found this topic, which explains the reasoning for poor quality of webcam picture:
https://forum-en.msi.com/index.php?topic=90313.0
as for your megaview 588, i can't speak for that as i've never used one, but what do you mean by poor quality? the hardware or video? sure your videos are not just poor quality?

App Store problem - blank screens

I'm getting blank screens in App Store on my iPad 3 with ios 6 - charts and categories screens are blank. Blank screens also when redirected to a particular app from a web page link. Wife has same iPad and hers works perfectly. Have rebooted, turned off and confirmed good wifi signal etc. everything else seems to be working. Any ideas please?

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Flash Player 10 Problem: Blank Screen

I just uploaded to flash player ten. I'm using Wndows Vista and Internet Explorer.
When on Youtube, half the time the video screen just loads a black, blank screen. If I refresh, SOMETIMES the video will then load properly. Using the "Watch this in a pop up window) seems to work, although the video quality appears degraded).
Curiously, when I get the blank, black window, any attempt to post comments bounces you to the login screen, even though I'm already logged in.
When on Hulu, I will sometimes get the emssage "I line in java script is causing this video to play slowly and may cause your computer to stop responding".
I've also had I.E. stop working and close abruptly. This "Black video window" screen is happening on other sites as well.
None of these problems were happening until I upgraded to flash player ten. Is there ANY sort of fix for this? I've heard that downgrading to flash player 9 doesn't neccessarily resolve the problem.
I've tried uninstalling, rebooting, and installing again. Still get the same problem.
As a side note; silverlight got dumped onto my computer during a windows upgrade. I removed it, and am hoping there isn't a connection. Registry issue?!?!

Correction; the hulu message was "A line in script (not Java, I believe) connected to adobe flash player is affecting playback and may cause your computer to become unresponsive".

Battety problems - blank screen wit battery sign with red line

I have the blackberry 8900 curve. Recently when I put my phone on charge it would turn my BB off and turn it self back on again. My battery was about 2% and I put it on charge and the phone turned off but when I looked at my phone the red light came on and then blank screen with a battery sign with a red line through it.
I got some advice to take out battery, sim card and memory card. Which I did and my BB turned back on. However my battery was still dead so I put it back on charge and it turned off and since then my BB hasn't turned back in. I've left it on charge and nothing.
Would really appreciate it if someone could help me out on this.
K.sandhu

Excellent advice! I just had the same thing happen to me and your post solution fixed my phone.

AOL problem - blank screen

Can anyone suggest an answer to this:
Whenever I sign onto AOL, I am faced with a blank screen except for a small asterisk in the top left hand corner.
Also, when I try to open any links in an email, I get the same blank screen.
I have reinstalled the AOL for Mac OS X, but this made no difference.

We have had several discussions with their 'tech support' but they do not have any trained mac experts; They also claim that all they have to do is to help the customer to get online.
I can get online to access emails and the send them.
What I don't understand is that, using the same AOL software, AOL works correctly on our iMac but not on the MacBook.

Mega view 566 problem

Thanks very much with the help in posting .
I have a Mega View 566 [had it around 6 years ] I love it ,but I have messed it up . I decided [god knows why ] to do a update on it by doing a reset settings [not using my PC ] halfway through the re set the battery ran out of power & it went off . I recharged the battery & now only the power light comes on & nothing else . I plugged it into my PC & my PC says device not recognised . I am stuck .I faxed MSI tech & no reply . I have telephoned about 4 diff MSI numbers & they either have never heard of the 566 or just cant advise . I only ever used it for downloading from the TV & using on my many trips abroad on planes . It was working perfect before I messed around with it ,but unless someone can come up with a answer ,or who can fix it [shop is shut down I bought it from in London] It is £300 into the dustbin . HELP . John. PS tried all the usual stuff [holding down power button for 5 secs . All that does is turn off the power light .

The batterys are fine ,plus I used the power plug as well [you can use it plugged in as well ] . Lock switch on or off does nothing . My only chance maybe is I spoke to a electrical repair shop in Devon & they say try downloading the settings on my PC on a SD card and then put that in the mega view . Not yet sure how to do that and my PC does not have a slot for a SD card in any case .

Table view control problem in screen painter

Hi All,
i am unable to display the contents in the table view control in screen painter....actually i have created two screen one to take input and second to display details on next screen in table view control..but i m nt getting that details...
my second screen PBO/PAI code is
PROCESS BEFORE OUTPUT.
loop at itab with control TCNTRL CURSOR tcntrl-current_line.
MODULE STATUS_0101.
endloop.
PROCESS AFTER INPUT.
loop at itab.
endloop.
MODULE USER_COMMAND_0101.
can anyone solve my problem????????
Thanks,
Jayshree

Hi,
Use below approch (syntax may not be correct as I have typed it in notepad but use it as guide line)
***In screen flow logic
PROCESS AFTER INPUT.
module cancel at exit-command.
chain.
    field: zproject_details-originator,
        zproject_details-proj_type.
    module check_data on chain-request.
endchain.
module user_command_002.
***In abap code
module cancel input.
leave program.
endmodule.
module check_data input.
if zproject_details-originator is initial.
    message exxxx "throw error message here
endif.
if zproject_details-proj_type is initial.
    message exxxx "throw error message here
endif.
endmodule.
module user_command_002.
save_ok = ok_code. "good practice to save okcode
clear ok_code.
case save_ok.
    when 'save' " using constant for fcode here is better
      perform save_data. "make it moduler instead of writing whole code in case statement
enscase.
endmodule.
form save_data.
** do some additional checks if required before saving
update zproject_details from zproject_details. " update database table here from work area contents
endform.
Regards,
Vishal

13" macbook pro retina 2013 problem: blank screen when waking up from standby

I bought a 13" macbook pro retina 2013 about 3 months ago and it is for about a week or two that I encountered a problem: when I close the lid and open it after a while(or it goes to standby by not using it for some time and then I wake it up by pressing a button), sometimes it shows a blank dark screen(with mouse cursor) for about 15 seconds and then either the screen is turned off(and by pressing a key it shows the login screen) or it shows the normal login screen.

I also have this problem, and now the
NVIDIA GeForce GT 650M is not working at all
I use gfxCardStatus for work on integrated card and i can't use other displays obviously, because all video outputs (HDMI & Thunderbolt) are taking their ways from discrete card (but working on other displays is my profession of audiovisual artist). My world guarranty is over now, new motherboard costs near 1500 $ and now i don't want what to do.Maybe reballing of videochip will help me, but i'm afraid that not autorised service in my country will kill my motherboard at all. This is my first mac & i have lost many time for take the money for buyng it. I have so much frustration.

Windows 8.1 Problem - Blank Screen after Login but Cursor Works and Limited Functionality

I have a Sony Vaio All in One Touch Screen. It is running Windows 8.1 and today I can't get to the Desktop or see the normal windows Metro interface. I get a black screen and I can move the cursor around, using various keys I can get Task Manager and
Explorer and some limited help functions up, but not the standard Windows Desktop or Metro interface. Any thoughts?

Hi MrBradyBunch,
The situation you descripted should be related to a service or software conflict, as well as a hardware driver problem, to confirm this, try to boot your computer in safe mode, Safe mode Starts Windows with a minimal set of drivers and services:
http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode
if the problem disappear, indeed, this should be caused by a service a hardware driver, you can log on in normal mode and perform a clean boot to fix this:
1. Swipe in from the right edge of the screen, and then tap Search.
2. Type msconfig in the search box, and then tap or click msconfig.
The detailed steps can be found at:
http://support.microsoft.com/kb/929135
If the problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as possible causes, you shoud turn to the computer vendor where you purchased the computer for harware support.
Regards
Wade Liu
TechNet Community Support

Mega view 588

have megaview 588 (which overall i LOVE) but am unable to get it to work with TV, either playing recorded shows TO tv or recording FROM TV - have correct cables, plugged in correctly but best i can get is audio only, no video... my TV has 2 input hook-ups (1 used for satellite rcvr, and use 2nd as needed for DVD which requires no add'l programming, just hook-up and go) as well as separate output (vacant) but when i switch DVD cable for PMP cable - nada...... and record does nothing either - as we are going on vacation soon and i wanted to use this to record new shows while we are out in evenings, would GREATLY appreciate ANY help/suggestions/ MAGIC to get this working!!!! thanx in advance -
ps - i am basically a dummy when it comes to getting too technical so please keep suggestions/responses simple!!!

Due to you can get the audio, thus I suppose your AV cable is no problem, maybe it’s your operation issue, please thoroughly read 5588 user manual from page38 to page40!!
Also, please follow MSI website descriptions to update latest F/W v1.0.26.1 and try again!!
(http://www.msi.com.tw/program/support/firmware/frm/spt_frm_ia_detail.php?UID=616)

Login Problem: Blank screen after the login window?

I have a user who has a 2008 MacBook Pro 15" Intel laptop running 10.5.4. It is bound to AD, with managed mobile account on the laptop (cached user credentials). The user is off the LAN right now on a road trip and is having problems logging into the laptop. When she logs in with her user ID and password, the login window takes a long time (15 minutes!) to authenticate her, and then when the login window finally goes away and the user's profile starts to load (expecting to see the Finder, Dock, menu bar UI etc), nothing happens - the screen sits at the default desktop picture and the user's account never loads.
Her AD password has not expired. She is a local admin on the laptop too.
Other local user accounts can log into the laptop without problems.
I have 100+ other identical users who dont have this problem.
I assume that a user-specific file has been corrupted. Any guess on which ones?

Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mega View 588 - USB OTG facility

Well, finally, out of boredom, I thought it was time I gave this a try!
It works a treat!
Connected my Fuji FinePix 2200 and uploaded pics, using the USB plug/adapter - no problem!
Out of curiousity I also tried connecting a generic 9-in-1 card reader. Guess what? Works perfect. So now, as well as the little SD/MMC slot, I can add Smart Media, Compact Flash & everything else. Luvvly Jubbly.
I might add that I did look at the compatability list, and neither product was on it, but both connected without a hitch and also with fast transfer times.
Now I wonder what would happen if I tried to connect my Ipaq...............................

So far I've only tried a smart media adapter and card and a generic flash drive. No problems with back up and files easily accessed when the 588 is mounted as a hard drive on my PC. Would be great if you could selectively back up external media but hey, still useful as is.
There is a "cut and paste" option on the 566 which lets you move files between the PMP and a SD card but this seems to be missing on the 588. I do like the option to use your own photos as wallpaper as you can choose something that makes the black menu font stand out more clearly.

Mega View 588 problem! (blank screen)

Similar Messages

Maybe you are looking for