[MEGA180] No LCD display under Windows XP

Hi all,
I have a mega pc 180 and have an issue with the lcd front panel.
the panel works fine in hifi mode and off or during windows boot, it displays the clock rightly.
I have installed the MSI Alert Pc from the website and now, when Alert Pc is launched under XP, the display go off. If I close the software, it still stay blank. If I have the display again I have to shudown and start again the mega PC. A restart from windows will not activate the front lcd.
I don't think it is the same issue that topics regarding the welcome.exe because on hifi mode or durang windows boot, it works fine.
Can someone help me ?
Regards

Did you install the PC Alert from the Mega 180 download page?
http://global.msi.com.tw/index.php?func=downloaddetail&type=utility&maincat_no=134&prod_no=40

Similar Messages

ACD as main display under Windows/BootCamp while in clamshell possible?

Is there any way to run a BootCamp Windows XP Pro installation on an MBP using the ACD as main display while in clamshell mode? Currently the system refuses to wake up after I close the lid. I use a BT mouse/KB, but even with a USB mouse connected it wouldn't wake up. It seems like it would be possible, but I'm not sure how to go about it.

Correct, there was no Gather Windows button.
I do have multiple adapters, but one is an Apple adapter which is, apparently, "passive" whilst the other is active. The passive adapter never works at all under MacOS X, but I haven't tried it under Windows. The "active" adapter works under Windows, but only shows the apple bootup logo under MacOS X, and then turns the display off.
I don't think that the mini displayport is faulty, because the second display plugged into it works perfectly through BootCamp.
I'll try thoroughly testing out all adapters tonight, and then try a different brand of display. I've seen a lot of posts about ViewSonics being flakey under MacOS X, so it's possible it could be on the display driver side of things. Maybe ViewSonic does something screwy signal-wise in their displays, and Windows is willing to deal with it but MacOS X isn't.
Oddly enough, the ViewSonic display I have was shipped with a single-link DVI cable, and it's always worked without a problem, even when plugged into the dual-link DVI port on the Mac Pro. So I don't believe that the display *itself* requires a complete dual-link connection to the computer.
I have much appreciation for all the help and suggestions. Thanks again.

Dreamweaver CC 2014: Does it scale under Windows (and a 4K-Display)

In April the renowned computer magazin c't published an article about 4K displays (issue 10/2014 page 123).
They wrote: No product from Adobe is usable (they really used that word) with a 4K display under Windows (7/8) because they do not scale.
The interface elements will be so tiny, that they cannot be used at all.
My question:
Did that changed with the latest version of Dreamweaver?
Thanks.

Thanks for checking that Preran
There are many other applications which can deal with the scaling method of windows 8.
Really hard to understand, why Adobe has decided not to support scaling.
The future will show, if that was a economically reasonable decision.
All potentiell buyers of Adobe products who own a 4K display will not buy a license.
I hope, that the impossibility of the usage with a 4K display is mentioned in the system requirements soon.
In
https://helpx.adobe.com/de/dreamweaver/system-requirements.html#Dreamweaver CC – Systemanforderungen
there's no hint.

Cinema Display on Windows XP 64bits

Hello,
Im trying definitely to use the controls to turn of and on the cinema display under Windows XP x64, the excelent drivers WinACD for windows 32bits doesnt work on windows xp 64bits edition.
http://sourceforge.net/projects/winacd
I read some people did the work to make it happend, but they never make it public for the rest of us to use this modified dirvers.
I heard about one way to do it, we need te .INF file of the WinACD drivers unzipping the .MSI instalator of the drivers, them some one says, that we have to modify the way he says
If you unzip the WinACD msi file, one of the files is actually the display INF file. Edit that and change:
[Manufacturer]
%APPLE%=APPLE_MON
[APPLE_MON]
to:
[Manufacturer]
%APPLE%=APPLE_MON,NTamd64
[APPLE_MON.NTamd64]
Save it, and tell WinXP 64 to use that file for the driver of your “pluag-and-play” monitor.
But i dont get the .INF file, can some one, help me, can some one give me a solution, any thing, if you can extract the .INF file and upload it to me for me to modify it, i be glad, or some one can share a complete solution for this, because we are a lot of people that needs Windows Xp 64 Bits to render and make CAD that is no compatible with windows Vista and have Cinema Display.
Im gettin mad, please help me if you can, them i will share the solution uploading it to SourceForge.net
Thanks

I actually just reinstalled the drivers, but this time from a new export onto usb. The display works fine now. I think it just didn't put all of the drivers on the first time I installed the apple stuff.
Try taking all of your drivers off and then reinstalling.
Not sure if this really helps.

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Open Dialog Box: full file name is not displayed in edit window under Windows 7

Only the last 16 characters of a file name are displayed in the edit window of a Common dialog box under Windows 7. What is the fix to this problem? I am coding in C/C++ and my compiler is Visual Studio 2005.

Hi warengharding624,
Based on your description, your issue is related about C/C++, since this forum is discussing about Windows Forms Controls, and I will move this thread to C++ forum.
In addition,Could you share us what the type of your project is?
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Better Display Driver under Windows 8 than Windows 7 for MacBook Pro Retina?

Anyone happen to know if the display support for a MacBook Pro Retina is better under Windows 8 than it is under Windows 7?
Ideally, I would like to be able to run 2880x1800 at True Color as well as have the HDMI out fuction as a second display (maching the behaviour while booted under Max OS X 10.8).
Under Windows 7, the highest resolution that supports True Color is 1600x1200. This would be okay if that setting did not distort the picture (everything is slightly squeezed). At 2880x1800, the highest color depth is High Color (16-bit) which is, well, not something one can actually use if doing graphics work. On my 27" iMac, 2680x1600 supports True Color as expected.
Also under Windows 7, the display connected via HDMI is not recognized.
I've contected both Apple care support and Microsoft support about this, but Apple referred me to Microsoft and Microsoft referrred me back to Apple.
Thanks,
Warren
P.S. Personally, I think it's rediculous to even attempt to do graphics work under Windows, but tell that to the Windwows based corporate world that I freelance in.

Yes, there is a better display driver for the MacBook Pro Retina while running Windows 7 Pro.
And, the answer is so obvious, that I feel a little silly having started this thread in the first place!
The Windows 7 Professional NVIDIA drivers for the NVIDIA GeForce GT 650M card need to be installed manually by downloading them from NVIDIA directly.
If you need to do this on your MBPr Boot Camp volume, use this link:
http://www.nvidia.com/Download/index.aspx?lang=en-us
Then, set the pop-up menus based on your MBPr. [Mine were as follows: GeForce; GeForce 600M Series (Notbooks); GeForce GT 650M; Windows 7 64-bit: English (US)]
What tipped me off to this is that the CUDA drivers need to be downloaded manually on the Mac OS X side to take full advantage of raytracing in Adobe After Effects CS6 and CC. As soon as I started to run that installer it dawned on me, "Hey, you probably need to install the drivers on the Boot Camp side as well." And sure enough after doing so, I am able select all of the expected resolutions as well as run 2880 x 1800 at Millions of Colors (32-bit).
I guess I'm showing my nearly three decades worth of being a Mac user where I'm accustomed to having about everything needed included with the OS.
-Warren

Dual Display view under Windows XP

Does my Notebook display dual view under Windows XP?

I've done some research. This dual display with single graphic chip feature was not offered with Windows 2000. This is a software restriction of Microsoft's Windows 2000 operating system and not a hardware technical restriction.

Curios text in one of three computers when displaying the very same mail in Outlook. I run Outlook 2003 under Windows 8.1.1

Curios text in one of three computers when displaying the very same mail in outlook.
I run Outlook 2003 under Windows 8.1.1 in all of my 3 computers. 70% of the mail from the same sender are shown OK in the actual computer and 100% of the very same mail are shown OK in the two other computers. If I forwards an OK received
mail from one of the “100%”, it will be received OK in the “70%” as well. For me the wrong displayed mail shows up as some kind of vector-descriptors (non converted html?). All links in blue are displayed ok and most of the text is readable in an unformatted
way. When it comes to logos etc it’s not readable at all. What to do?
Regards
Björn Söron
[email protected]

Check these out, they fix most issues in Outlook
https://support.microsoft.com/kb/2768648
https://support.microsoft.com/kb/2652320
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Can a Apple Studio Display be used with a none Mac PC under Windows

Hello, can a 21 Inch Apple Mac Studio Display Monitor (Graphite) be used with a none Mac PC under Windows. Thanks Peter

what's a "none" Mac PC?
It can be done, but you'll need to purchase an ADC-DVI adapter in order to connect to the DVI port on the PCs video card.

Display is under Windows XP a lot Brigther

My Macbook Pro (LED) Display is under Windows XP a lot Brigther then in OS X.
When i sitting Outside, i put the Brigthness under OS X to Maximum to see anything, under Windows Xp ist enough 75%. The Display is Calibrated.
Someone know a sulotion to get the same Brithness as in Windows?

Perhaps try turning off "automatically adjust brightness" in the Displays pref pane? I don't know for sure, but I suspect that doesn't affect Windows (if you're running Windows in BootCamp), which might account for the difference.

Double Display on Imac doesn't work under windows, there's a solution?

Hi, I'm a mac user who needs windows for certain applications, so I've installed it with bootcamp on my Intel based Imac 20''.
It's very useful for me having 2 monitors to work also in windows, but there's a problem: when I boot under windows the imac transmits the signal (I can go over the main monitor with the mouse) but the 2nd monitor doesn't receive the signal and remains black!
Everything is tested and works properly on macos, so there's a possible solution?
Thanks
Davide

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

Running two displays from MBP Retina under windows

I'm looking at purchasing a MBP Retina 13". I have two external monitors that can accept HDMI and DVI (neither can do displayport). Some software that I run requires me to sometimes boot into windows. Under windows 7, can I output a DVI signal from each of my thunderbolt ports? Do I just need to run two mini-displayport to DVI adapters? Or is not that simple? (both external monitors are 1900x1080)

Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian

Mini-DVI not supported under Windows XP?

Hi all,
I recently picked up a mini-DVI to VGA adapter and a 17" LCD from Lenovo (IBM). Under OSX, the dual displays works wonderfully well and easy. The OS picked it up right away and ran with it.
Under Windows XP, however, no such luck. The display will mirror the iMac during the Windows boot-up process and then go black once XP is booted. The monitor claims nothing is attached to it.
Windows will play the "ding-ding" sound whenever I unplug or plug the adapter and even claims to see the monitor via the Display settings panel.
Google told me several people have voiced this complaint while logged into Windows on their Intel machines. Does anyone here know of a fix or workaround? Thanks!

Any ideas? I am having the exact same problem. The funny thing is when I boot in XP the windows logo is displayed on my external monitor. But then disapears. I will try and update the ATI monitor drivers, and see if there is a bootcamp update. But anyone with info please let me know!!
thanks

Video problem on PXI-1025 LCD Display

I have a video problem with the internal LCD display in a PXI-1025 MegaPAC Chassis with an NI 8175 embedded controller. Windows XP is loaded on the machine. The external monitor output on the controller looks fine, but all black areas on the LCD display have a snowy green appearance (green "snow" in constant motion like a bad TV picture), the white areas are pinkish, and there are random bars and lines in the display. I substituted a different embedded controller, which made no difference. Device Manager reports no problems under "Display Adapter", with an Intel 82815 graphics controller installed. I tried uninstalling and reinstalling the display adapter, which also made no difference. Since the problem appears on the initial boot screen, it doesn't appear that it could be a display adapter problem anyway. I also pulled all of the boards out of the chassis, including the hard drive, which we have on a separate card from the controller, and the problem still exists. (It doesn't boot without the hard drive, of course, but the green snow stays on the initial boot screen).
Since the external monitor output works fine and the problem exists with two different embedded controllers, and nothing else installed in the chassis, it appears that the problem is in the MegaPAC chassis itself. Is there anything else I should try before sending the chassis back to NI for repair? Are there any components in the chassis that can be replaced by the user?
Thanks,
Al

Al,
It sounds to me like it may be the display itself. I would go ahead with the RMA.
Regards,
Lon A.

[MEGA180] No LCD display under Windows XP

Similar Messages

Maybe you are looking for