Megaplayer 515 shows as USB PRODUCT
Hi all,
Hope somebody can help me out here...
I've the Megaplayer 515 and it worked just fine for about a year. I just wanted to download some music to it and I noticed that Windows XP doesn't recognize it anymore. In Device Manager, it shows up as <USB PRODUCT> under IDE/ATA/ATAPI-controllers. The device itself indicates to be connected. I tried the following:
1. Set USB legacy support to Enabled/disabled/Auto: no change;
2. Reflashed bios to 9.20 -> I was using a beta bios from MSI to test and thought that may do the trick - bad luck ... no change.
3. In Device Manager: enabled "Show hidden devices" and uninstalled the <USB PRODUCT>. Then restarted the system and plugged the MP in again. The Hardware Wizard showed up and I choose Auto everywhere. It starting installing the following device: %USB\GenericDeviceDes% and then asked me for the following disk "%DiskName%. It seems that Windows is looking for Stums.sys. However, when I point to the file, the hardware wizard says there was a problem installing the hardware.
4. Tried reinstalling all USB-devices: I uninstalled all USB drivers through Device manager and restarted the PC. No luck, still <USB PRODUCT>
I tried all USB ports and disconnected all other USB devices. I'm getting sick and tired of this ... Does anyone have another suggestion?
TNX!
Quote
let Windows re-Plug and Pray them
i used to say that when i tried to repair pooty old PCs for friends of mine...
BTW if the MP515 works fine in another computer, then at least the device isn't at fault then!
Similar Messages
-
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
my iphone 4 is not responding the screen is just showing a usb lead and the itunes symbol. when i plug it into my desktop mac and try to sync it to itunes ,itunes is telling me the phone is in a restore mode. How do i get it to respond without restoring the phone to new ? there is no option to restore with backup as i have not backed up any of the data on the phone any help would be greatly appreciated thanks
http://support.apple.com/kb/HT1808
You can't not restore if you have reached this point -
I was updating my IOS in iTunes. It was taking over 2 hours and when I came back, there was a symbol on the iPad showing a USB plug pointing to an iTunes icon. When I unplug the iPad from my PC, it goes blank and won't respond.
The restore is not completed. You will have to re-try the restore process again.
Try using this link to re-iniiate the restore.
http://support.apple.com/kb/HT4097 -
Trying to update OS on an original iPad. Connected to iTunes -- screen is locked showing iTunes/USB cable icons. iTunes says must restore to default settings, but receive an error message 3014 that this cannot be done. Cannot unlock screen to use nor can I update or restore, so iPad not usable at this point. How can I unlock screen so I can use iPad, how do I fix this error? Latest version of iTunes is downloaded and I've followed all the instructions in regard to Windows. I'd at least like to unlock iPad so it can be used. Thanks.
bummer. *Note that if you are actually running iOS 5.1.1, that's it for the iPad 1st Gen.
Resolve iOS update and restore errors - Apple Support
ÇÇÇ -
when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.
I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply
-
I tried to update my 4s to the latest ios6. itunes came back and said there was an unexpected error. the screen on the phone is hung showing a usb cable and an arrow pointing to the itunes icon. itunes does not see the phone as being plugged into my computer. I restarted itunes, no difference. I can't seem to reset the phone. It comes up with the apple icon and then goes back to the usb plug screen. I'm totally hosed right now!!!
Error 1604:
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
From Apple Support page >
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
My iPod is showing a USB cable with an arrow pointing to the iTunes logo
My iPod is showing a USB cable pointing to an iTunes logo, this happens everytime i turn it on, i can get nothing else. I have
done all the diagnostics and i have reset everything, nothing makes it work. It will not sync to the computer, but i know there is nothing wrong with my computer because i have an iPod nano which works fine. Please help.Hey,
So you plug it into the computer with itunes open and nothing happens?
Make sure your iTunes is upto date and try again.
Jason -
my ipod touch is showing a usb pointing to the itunes logo on the screen and nothing else. It won't switch on beyond that. Please help!
Sounds like your iPod is in restore mode. Connect it to iTunes. iTunes will pop a little message up saying that your iPod is in restore mode and asking you if you want to restore it, click yes. Your iPod will restore to factory settings and you will be given the chance to restore from a backup. You can do this or set it up as a new iPod.
Here is Apple's page on restoring your iPod.
http://support.apple.com/kb/ht1414
Hope that helps. -
HT201406 when ipod is switched on the screen shows a usb cable symbol and itunes symbol, why is this
when ipod is switched on the screen shows a usb cable symbol and itunes symbol, and it wont let me switch it on even though it is fully charged up, why is this?
It is either an erased iPod or an iPod that has a problem. The screen is telling you to connect the iPod to your computer via the USB cable and restore via iTunes. For how to restore see:
iTunes: Backing up, updating, and restoring iOS software -
my ipad is stuck on itune showing the usb cable but cant get it off
After a trip to the Apple Store with this problem, I found out that USB connections have different levels of power. Try changing USB ports, then look for iTunes to recognize the iPad is connected. Good luck!
-
i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015. -
I just received my iPad2 today. When I turned it on it only showed a USB cable and the iTunes icon. What does this mean?
The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer running iTunes (version 10.2 +).
Getting Started guide : http://support.apple.com/kb/HT4053
The iPad manual, which also has a chapter on getting started can be downloaded from here : http://support.apple.com/manuals/#ipad -
HT201407 my iphone 3gs is showing a usb sing that i should connect to my itune
my iphone 3gs is showing a usb sing that i should connect to my itune
sounds like your phone needs to be restored with itunes, what where you doing before this started happening
-
HT4623 why is my iphone showing a usb cord pointing at a itunes button
I downloaded IOS6 update on my Iphone and now it only shows a usb cord pointing at a itunes button, what do i do?
I have plugged it into the computer and done a restore and it gives me an error. It will not restore. What is the next step.
Maybe you are looking for
-
Greetings All, I am getting this message from the Creative Cloud... "Download Error" and looking to find out how to rectify this. I have read some of the forum responses; However, losing internet connection is ruled out (I am on it now, the interne
-
Hyperion MDM OS support memory limitation
Hi , I want to know that is Hyperion MDM is contrained by Operating System to support no more than 2 GB of memory? Does it true for DRM 9.3.2 and Version 11 also? If yes...Can it still support more than 80,000 member data into a single verion of DRM
-
Mac Air(OSX) stuck on mute! no devices visible in System Preferences Sound Output/Input
I have a MacBook Air, Version 10.6.8, Processor 1.6GHz Intel Core 2 Duo. My Sound is stuck on mute: -when I go to System Preferances>Sound and go to Output or Input, under "Select a device for sound input/output" there is nothing listed. There at the
-
Location services in Mavericks with no WiFi?
I just installed Mavericks on my Mac Pro, and I want to use its location-aware features, like travel times in Calendar, etc. However, since it's a desktop, my computer is connected to the internet via ethernet, and has no WiFi hardware installed. So,
-
Can't get the new pages to open on iMac running parallels
I have downloaded new version of Pages but when I go to launchpad and try to open the icon appears for a second and then nothing happens. Same with Presentation and Numbers. The old versions seem to work - any help? I am running Mavericks and am tes