MegaRadio in restricted user mode

Hi,
I install the MegaRadio ion my Mega 651 running WinXP, and it plays fine when I log in
as the computer administrator. But if my kids log in as limiited account, MegaRadio will
run but no sound coming out, sound works for everything else (music/movie)
Anybody has any idea? Is this a WinXP issue or MegaRadio?
Koop

Is is possible that the setting for MSI radio is in the current_user key of the registry which means setting for it are for each user. I don't have it installed so if someone has can they check this.
Now if this is the case some times you can take that key and add it to users key.

Similar Messages

How to restrict user at selection screen while executing in background mode

hi all,
how to restrict user at selection screen while executing in background mode
Regards
Deepak

Hi,
We can get the Program whether this is running in background or not then we need to use SY-BATCH, if the SY-BATCH is set to X then the program is running in Background,
so in the INITIALIZATION event, you can use this SY-BATCH and check the User names, and give the error messsage which you want to restrict
Regards
Sudheer

How to restrict the all access ? Single user mode....

I am doing export/import of schema objects from Windows to Oracle. How to make sure when I do the export in the migration database no one else is modifying the data. Is there any single user mode so that I can be sure of only one connection while exporting?
Oracle 10g R2 on Windows Server.
Thank you,
Smith

Perhaps you are not familiar with the concept of multi-version read consistency.
No one can see that which is not committed and reads can never be blocked.
If you want a system where no one can see things kill their sessions and do a STARTUP RESTRICT.

How to mount USB & CDROM drives from single user mode - Solaris boot disk?

Hi All,
I need to carry out ufsrestore on a single newly replaced system disk (no redundancy / mirroring) from either USB or CDROM drives from the following steps:
( i ) GRUB => e, e, cdrom –s, Enter, b (boot from Solaris 10 x86 media).
( ii ) Choose menu 1 for Install Solaris Interactive Mode to reach single user mode.Below are the commands that I have tried in single user mode without success:
mount –r –F pcfs /dev/dsk/c1t0d0p0 /cdrom (after unmount Solaris CD)
mount: /dev/dsk/c1t0d0p0 is not a DOS filesystem.
svcadm –v enable smserver
svcadm: Pattern ‘smserver’ doesn’t match any instances
svcadm enable autofs
svcadm: Pattern ‘autofs’ doesn’t match any instances
devfsadm
devfsadm: mkdir failed for /dev 0s1ed: Read-only file system
mkdir /mnt
mkdir: Failed to make directory “/mnt”; Read-only file systemPart of the problem is due to the current READ ONLY filesystems which does not allow the creation of mount point such as /mnt.
I have been able to create both / root (/dev/dsk/c1t0d0s0) and /export/home (/dev/dsk/c1t0d0s0) filesystems with newfs that are awaiting for restore using ufsrestore.
The only option I am left with is to attach a secondary disk to install Solaris 10 on either of them before bring the system to multi-user mode so that service such as volmgt, autofs, volfs are available to access USB & CDROM drives.
Any suggestion on how to resolve this issue?
Many thanks,
Jack

Hi JKGN,
Is the directory a located under the root filesystem. ie /a? Are there any other mount point for say USB drive as well? I am not in a position to try it out right now but will get back
to you soon on whether /a exist or not.
Btw, the last thing I managed to do on this system at the time was added a secondary 1TB internal disk with the intention to restore both / and /export/home data onto this disk while
making use of all the disk device management services such as the following services only available in a fully installed Solaris system (both single & multi-user modes) installed on the
primary disk:
# svcs smserver
STATE          STIME    FMRI
online         Jun_08   svc:/network/rpc/smserver:default
# svcs autofs
STATE          STIME    FMRI
online         Jun_08   svc:/system/filesystem/autofs:default
# devfsadm
# iostat -En
c1t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: ATA      Product: SAMSUNG HD321KJ Revision: 0-11 Serial No:
Size: 320.07GB <320072932864 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 41 Predictive Failure Analysis: 0
c0t0d0           Soft Errors: 0 Hard Errors: 5 Transport Errors: 0
Vendor: PHILIPS Product: DVD+-RW DVD8801 Revision: AD21 Serial
Size: 17.54GB <17538875392 bytes>
Media Error: 0 Device Not Ready: 5 No Device: 0 Recoverable: 0
Illegal Request: 10 Predictive Failure Analysis: 0
c2t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: JetFlash Product: Transcend 16GB   Revision: 1100 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 7 Predictive Failure Analysis: 0
# rmformat
Looking for devices...
     1. Volmgt Node: /vol/dev/aliases/cdrom0
        Logical Node: /dev/rdsk/c0t0d0s2
        Physical Node: /pci@0,0/pci-ide@1f,1/ide@0/sd@0,0
        Connected Device: PHILIPS DVD+-RW DVD8801 AD21
        Device Type: DVD Reader/WriterHowever, I was disappointed that "iostat -En" has not found the secondary disk (1 TB) even though it was available earlier, for Solaris installation as the only disk on the same system.
As a result, I am left with no option but the need to rebuild this system with only a single primary disk while in single user mode. However, the single user mode that I am in is the
one from Solaris installation disk with restrictive (_cannot create folder for mount point or running disk management utilities_) capability such as those services just covered, compared to one from a completed Solaris installation system with full access to all filesystems and utilities / commands in general.
I would very much value your assistance on how to mount both CD & USB in this restrictive limited Read Only OS (assume that it is running from memory) in order to get complete access to
the blank primary disk so that full restore with ufsrestore could take place.
Thanks in advance,
Jack
Edited by: 797805 on 9/06/2012 04:15

Mysterious Opening of Applicaitons in Limited User Mode

I manage a computer lab at a university. We have recently purchased a 17 inch iMac (late 2006 model, 2.0 GHz)
I limited the student's mode so that they can only access "Appearance, Dashboard & Expose, Desktop & Screen Saver, Dock, International, Security, Keyboard & Mouse, Print & Fax, Sound, .Mac, and Universal Access" in the control panel. I used the administrator's "Account" to give this limit.
I don't know what students did, but on some iMacs, when you boot up the iMacs, some applications launch by themselves. On some iMacs, it's MSWord, in some, it's Safari and MSWord. in some, it's Firefox, and Safari. etc.
I checked the administrator's Login Items. Only iTunesHelper is set to automatically launch. Students' shouldn't be able to access here anyhow
I also checked /Library/LaunchAgents and LaunchDaemons (administrator's account) just in case something is there, but these are empty.
I cannot figure out how those applications are set to launch themselves when you login to the student's (limited access) mode.
Any assistance is appreciated.

Assuming that you aren't attempting to restrict application use, it is likely that the students are using the "Open at Login" contextual menu item in the "Dock".
The "Parental Controls" in "OS X Client" that limit access to preference panes only restrict access to the panes themselves, not necessarily to the user settings which they configure. A restricted user with access to alternative methods to modify the configuration files, either via GUI or by directly editing the file, can change things at will.
One thing that might help is to configure "Login Items" using "Workgroup Manager.app", which is included with the "Server Admin Tools" which can be downloaded (free) from Apple. It can be used to configure "Login Items" on a stand-alone "OS X Client" Mac, such that control is exerted from 'mcx_settings' instead of the user's own plist files, which should block the effects of the "Dock" contextual menu.
http://www.apple.com/downloads/macosx/apple/macosx_updates/serveradmintools1047. html

How to put database in single user mode?

hi
how to put database in single user mode?and what could be the impact of this to EBS R12 RUP 6.DB 10.2.0.0
rgrds

hsawwan wrote:
Hi,
Are you referring to restricted mode? If yes, please see these links/docs.
Restricting Access to an Open Database
http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/start002.htm#ADMIN11155
Note: 1059291.6 - How to Put a Database into Restricted Mode and Verify Restricted Mode
The impact is none of the users will be able to connect to the database/application (except for the sys user which can connect to the database). Usually, you would need to put the database in restricted mode when doing upgrade/migrate (i.e. you do not want to have active user sessions in the database during that time).
Thanks,
HusseinHi
i want to mean:
ALTER SYSTEM QUIESCE RESTRICTEDThe ALTER SYSTEM QUIESCE RESTRICTED statement may wait a long time for active sessions to become inactive. You can determine the sessions that are blocking the quiesce operation by querying the V$BLOCKING_QUIESCE view. This view returns only a single column: SID (Session ID). You can join it with V$SESSION to get more information about the session, as shown in the following example:
select bl.sid, user, osuser, type, program
from v$blocking_quiesce bl, v$session se
where bl.sid = se.sid;I suspect all apps user can.t login to db?
Edited by: new2appsdba on Aug 19, 2010 1:54 AM

Restricting User from creating new records using when-validate-record

Hi,
I have a requirement for which I have to restrict he user from creating a record in the Supplier Master form if the suppliier type is 'Affiliate Supplier'.
I have done the following setups
Seq 10
Description Restricting user from creating Affiliate records
Level Function
Enabled Yes
Condition:
Trigger Event WHEN-VALIDATE-RECORD
Trigger object VNDR
Condition "${item.VNDR.VENDOR_TYPE_DISP_MIR.value} is NOT NULL
and
${item.VNDR.VENDOR_TYPE_DISP_MIR.value} LIKE 'Affiliate%'
Processing Mode BOTH
Context
Level User
Value User Name
Action Sequence 1
Type Message
Action Description Saving Affiliate record
Language ALL
Message Type Show
Message Text You Cannot Create Affiliate records Here
Action Sequence 2
Type Builtin
Action Description Stop Proceesing
Language ALL
Action Enabled Yes
Builtin Type RAISE FORM_TRIGGER_FAILURE;
This is working good on one instance but when I moved it to another instance
when I query the form and try to navigate to the bank accounts tab of the form which is based on a differnt block i.e VNDR_USES block, the when-validate-record trigger fires there also and stops the processing.
Any suggestions on this would be higly appriciated.
Thanks in Advance.

Hi Srini,
Yes, it does work...but in a Form Session if i Create more then one Item, in some cases it fires for the first records and not sleeps for the second.
Sometimes it doesn't give any response.
Appreciated if you divert to the link to check the Pacthes for 11.5.10 on Form Personalization.
Please share any ideas/example if yiou have to achieve the below requirement.
Requirement:
Once New record is created , a Custom Procedure should be invoked.
with out closing Form i am able to create n number of Items, so for every Item it should invoke Custom PLSQL Code on Save.
Let me know if i can achieve the same in Custom.pll .....as i can use either of Options.(Form Personalization/Custom.pll)
Thanks & regards,
Edited by: user632004 on Mar 16, 2010 7:50 PM
Edited by: user632004 on Mar 16, 2010 8:09 PM

Problems with restricted users, urgent help needed

Greetings,
I represent a company called eChiron, a service desk company for several client companies.
We have a client company that has bought between 100 to 200 cell phones, all Nokia 6233. They all run client PCs with windows XP SP2 and are all restricted users (mandatory).
We've installed 2 nokia PC suites as pilot prior to mass deploying and have both failed to run correctly.
They execute correctly if the user is changed to local admin (being that the method of instalation), but when reverting back to restricted user the application doesn't work correctly.
It starts and (apparently) conects to the mobile phone trough bluetooth interface. In reality the conectivity is nonexistent (we've tested by turning off the mobile phone...) and the connection log reports "conection failed".
As i mentioned before, it's not an hardware fault since it all works correctly in admin mode.
Thanks in advance for any possible help,
J
Edit: the installed version is the latest (17/december) and the language is portuguese.
Message Edited by echiron on 17-Dec-2007 02:27 PM

This has always been a limitation in PC suite, I assume you've tried the latest version 6.85?
You may want to take a look at the link below, it may suit your needs better.
http://www.businesssoftware.nokia.com/pc_suite_downloads.php

Wont run in user mode

I can load and run adobe cs5.5 in windows 7 on our school domain, but when I log into the computer with a student account it says cannot run in guest account.
Adobe says I need to grant full admin rights, but this is impossible and does not make sense, I work at a College, the whole point of a College network is to restrict student access, adobe must realize a large part of their clients are in this same boat. I have never had a problem with xp and previous versions of cs.
Please help me?
Ian

Thanks,
just to clarify, think i need to grant the rights, re-install in admin mode, test in user mode, than go back to group policy rights?

DUN Bluetooth connection to PocketPC, Vista and restricted user rights

Hallo,
I've successfully established a DUN connection to my Pocket WM5-based QTEK 9100 smartphone via Bluetooth and the Toshiba Stack, latest version. My notebook is a X200-21D with Vista Home Premium.
Everything works well as far as I don't change the Vista user to an user with restricted rights, for the user with Administrator rights the Bluetooth Utility created a new DUN connection and a new modem with a virtual COM port. The user with the restricted rights isn't allowed to setup a new connection but this is necessary to connect to the smartphone with the Bluetooth Utility. On the administrative account the radio button to allow the connection to be dialed from other users is disabled and greyed out, so there is now way to open it for other users.
How can I setup an Bluetooth DUN connection for a user with restricted rights ?
Thank you in advance !

Should the Restricted user use the same DUN configuration like the Admin ?
If so, then you can use "Bluetooth Settings-> Custom Mode". This allows you to
select the "33600 Standard Modem" from the list which was configured before by
the Admin. So every DUN which was configured by the Admin can be used by the
Restricted user with this method. Restricted users can not install hardware, so
if the Admin has not installed a modem, then also the Restricted user can not use it.
The Admin can pre-install a modem with the Bluetooth stack installation.
This is useful if the restricted user should be able to configure a DUN connections
with advanced modem settings which are not used by the Admin.
This should be possible if the "as.ini" file has a line "MODEMINST = 1"

2012 Macbook Pro won't boot from CD and freezes in single user mode

I'm rebuilding a macbook pro. Everyting was fine until I tried to install Snow Leopard from the disk. It goes to the Apple symbol no spinning wheel and you can hear the drive working for a few seconds but then stops. I've also tried booting to sinlge user mode but it just freezes after Loading System\Library\Caches\com.apple.kext.cahces\Startup\Extensions.
I've tried resetting the PRAM as well.

If you have a 2012 MacBook Pro, you can't install Snow Leopard because it's not compatible, so it's normal that you can't start OS X.
Now, you have to install OS X Lion or Mountain Lion again. Hold Command, Option (Alt) and R keys while your Mac is starting to start into OS X Recovery, and reinstall OS X. After reinstalling OS X, you will be able to use your computer.
You can't run an older OS X version than the one that came with your computer, because of some reasons:
1. The hardware isn't compatible.
2. The firmware restricts the installation of older versions on the computer.
3. It's illegal: Apple doesn't allow you to install an older OS X version than the one that came with your computer, and it doesn't mind the method you use (a "normal" installation or a virtual machine)

Restrict users to change value in user id field in SM36

Hi,
Our users are currently given authorization objects S_BTCH_NAM, S_BTCH_ADM and S_TCH_JOB in order to be able create background jobs and execute using batch admin userid, and not under their own userid.
I like to know is there way to restrict users to execute transaction SM35, SM36, SM37 to create a job under another person's userid.
I am looking at grey off the userid field in SM35, SM36, SM37 when users execute these t-code in online mode. I want to restrict them from schedule job to run under another person userid.
However, if users perform a transaction and call a customised program to create a batch job in background to be executed under batch_admin userid, without failing the job.
How can it be achieved? Does SAP allows configuration to grey off userid field?

The problem is that our customized program will first create a job under user "X" userid for audit trail purpose. Because user "X"does not have necessary authorization to perform full update of all other transactions or tables update, in the job, the program will indicate a non-user account with SAP_ALL authorization to perform the update.
Since your custom program check for S_BTCH_ADM and S_BTCH_NAM from User's authorization we cannot put S_BTCH_ADM=N there and in that case, users would be able to create jobs with other user ID by executing SM36 directly.
Option 1: Discuss with your developer if it is possible to create a custom exit in the Sm36 program to perform the above authorization check in your Batch user ID's authorization instead of your dialog users. In that case your custom program would run as expected as long as your Batch user ID has proper authorizations for S_BTCH_ADM and S_BTCH_NAM and your dialog users can be restricted to S_BTCH_ADM= N
Option2: Create a transaction variant for SM36 in tcode SHD0 and make field "User" invisible and then link the transaction variant to a custom tcode which is to be created with start type "Transaction with Variant (variant transaction)".
Please refer to an SDN article for process of [creation of a transaction variant and linking it to a variant transaction|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d1443e-0184-2c10-c68d-c612f771fe6f?quicklink=index&overridelayout=true]
Then have your custom program updated to call the custom tcode instead of SM36 and modify your user's roles to replace SM36 authorization with ZSM36 (Check indicator values of SM36 are pulled into the role). This will ensure your custom program can create jobs under a different user whereas when your user executes SM36 online, the field to change 'user' will not be visible and by default they would be forced to create jobs under their own IDs inspite of having S_BTCH_ADM=Y and S_BTCH_NAM= <your Batch user ID>
Hope this helps!
Sandipan

Restricting User-Defined Layout in CV04N

Hi All
A user having cv04n authorization can change the layout and save as User-Specific Layout. We may be giving various information via CHARS / Values and users add those to layouts and see
Now a User who do not have Authorization to a Document type , say FIN (for Finance) , can get the details in the CHARS and Values of FIN Document Type using cv04n, by modifying the standard layout.
Any Authorization to control user not to change layouts in cv04n...?
I have found one Authorization S_ALV_LAYO which restricts to make Global layout, but it allows to make User Defined layouts..
Any solutions to restrict User not to modify default layout in cv04n?? Or in way can we restrict User not to add CHAR s into search layouts?
Regards
Aby

Hi Aby,
We can restrict the user from viewing the documents based on document type and authorization group. This can be achieved by implementing BADI "DOCUMENT_SEARCH01" and interface "CHANGE_SEARCH_ORDER". Inside this we can do an authority check on each document (DOKAR), using standard authorization object for document type C_DRAW_TCD. And similarly authorization group (BEGRU) can be checked using auth obj C_DRAW_BGR can be checked.
The authority check can be done in following way,
LOOP AT EACH DOC.
    AUTHORITY-CHECK OBJECT 'C_DRAW_TCD'
         ID 'DOKAR' FIELD LV_DOKAR                              " LV_DOKAR is doc no.
         ID 'ACTVT' FIELD '03'.                                           " 03 is display mode
Similarly check for auth grp.
Hope this will help you. If you need any more inputs let me know.

IMac 7,1 boot only in single user mode

Hi all
I've a colleague with the following problem... his iMac 20'' (iMac7,1) is able to boot ONLY in safe/single user mode (with shift key pressed during boot).
If he tries to boot normally, after the usual Apple logo screen he gets a blank (light grey) screen. No finder, no login screen.
We've tried this procedures:
- SMB reset
- PRAM cleared
- OS Reinstall (we've tried from Lion to Mavericks... actually there's 10.7.5 installed)... note that ALL installation procedure has completed successfully.
- tested the 1 RAM module installed (seems to be OK)
- tested the HD (no problems found)
Despite all these attempts, this iMac is booting well only if we press SHIFT during startup. All programs run well, wifi is working and online update too. If we reboot leaving it to restart normally (no key pressed) it shows Apple Logo for 1 minutes, then (after a black reset of the screen) seems to crash/stuck into an empty grey screen.
Is possible to identify which driver/kext is causing this problem? It can be an hardware problem? How we can fix it?
Thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.SafariNotificationAgent com.apple.usbmuxd com.apple.xprotectupdater com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2636415542 842973933 4019080058 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Retrieving ALL values from a single restricted user property

How can I retrieve ALL values of a single restricted user property from within
a .jpf file?
I want to display a dropdown list within a form in a JSP which should contain
all the locations listed in the property 'locations'. I ever get just the default
value when I access the property via
ProfileWrapper pw = userprofile.getProfileForUser(user);
Object prop = pw.getProperty("ClockSetup", "Locations");

Well, the code you've got will retrieve the single value of the property
for the current user. You're getting the default value because the
current user doesn't have Locations property set, so the ProfileWrapper
returns the default value from the property set.
I assume you want to get the list of available values that you entered
into the .usr file in Workshop. If so, I've attached a
SetColorController.jpf, index.jsp, and GeneralInfo.usr (put in
META-INF/data/userprofiles) I wrote for an example that does just this.
It uses the PropertySetManagerControl to retrieve the restricted values
for a property, and the jsp uses data-binding to create a list from that
pageflow method.
For a just-jsps solution, you can also use the
<ps:getRestrictedPropertyValues/> tag. I've attached a setcolor-tags.jsp
that does the same thing.
Greg
Dirk wrote:
How can I retrieve ALL values of a single restricted user property from within
a .jpf file?
I want to display a dropdown list within a form in a JSP which should contain
all the locations listed in the property 'locations'. I ever get just the default
value when I access the property via
ProfileWrapper pw = userprofile.getProfileForUser(user);
Object prop = pw.getProperty("ClockSetup", "Locations");
[att1.html]
package users.setcolor;
import com.bea.p13n.controls.exceptions.P13nControlException;
import com.bea.p13n.property.PropertyDefinition;
import com.bea.p13n.property.PropertySet;
import com.bea.p13n.usermgmt.profile.ProfileWrapper;
import com.bea.wlw.netui.pageflow.FormData;
import com.bea.wlw.netui.pageflow.Forward;
import com.bea.wlw.netui.pageflow.PageFlowController;
import java.util.Collection;
import java.util.Iterator;
* @jpf:controller
* @jpf:view-properties view-properties::
* 
* <view-properties>
* <pageflow-object id="pageflow:/users/setcolor/SetColorController.jpf"/>
* <pageflow-object id="action:begin.do">
* <property value="80" name="x"/>
* <property value="100" name="y"/>
* </pageflow-object>
* <pageflow-object id="action:setColor.do#users.setcolor.SetColorController.ColorFormBean">
* <property value="240" name="x"/>
* <property value="220" name="y"/>
* </pageflow-object>
* <pageflow-object id="action-call:@page:index.jsp@#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
* <property value="240,240,240,240" name="elbowsX"/>
* <property value="144,160,160,176" name="elbowsY"/>
* <property value="South_1" name="fromPort"/>
* <property value="North_1" name="toPort"/>
* </pageflow-object>
* <pageflow-object id="page:index.jsp">
* <property value="240" name="x"/>
* <property value="100" name="y"/>
* </pageflow-object>
* <pageflow-object id="forward:path#success#index.jsp#@action:begin.do@">
* <property value="116,160,160,204" name="elbowsX"/>
* <property value="92,92,92,92" name="elbowsY"/>
* <property value="East_1" name="fromPort"/>
* <property value="West_1" name="toPort"/>
* <property value="success" name="label"/>
* </pageflow-object>
* <pageflow-object id="forward:path#success#begin.do#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
* <property value="204,160,160,116" name="elbowsX"/>
* <property value="201,201,103,103" name="elbowsY"/>
* <property value="West_0" name="fromPort"/>
* <property value="East_2" name="toPort"/>
* <property value="success" name="label"/>
* </pageflow-object>
* <pageflow-object id="control:com.bea.p13n.controls.ejb.property.PropertySetManager#propSetMgr">
* <property value="31" name="x"/>
* <property value="34" name="y"/>
* </pageflow-object>
* <pageflow-object id="control:com.bea.p13n.controls.profile.UserProfileControl#profileControl">
* <property value="37" name="x"/>
* <property value="34" name="y"/>
* </pageflow-object>
* <pageflow-object id="formbeanprop:users.setcolor.SetColorController.ColorFormBean#color#java.lang.String"/>
* <pageflow-object id="formbean:users.setcolor.SetColorController.ColorFormBean"/>
* </view-properties>
public class SetColorController extends PageFlowController
* @common:control
private com.bea.p13n.controls.ejb.property.PropertySetManager propSetMgr;
* @common:control
private com.bea.p13n.controls.profile.UserProfileControl profileControl;
/** Cached possible colors from the User Profile Property Set definition.
private String[] possibleColors = null;
/** Get the possible colors, based upon the User Profile Property Set.
public String[] getPossibleColors()
if (possibleColors != null)
return possibleColors;
try
PropertySet ps = propSetMgr.getPropertySet("USER", "GeneralInfo");
PropertyDefinition pd = ps.getPropertyDefinition("FavoriteColor");
Collection l = pd.getRestrictedValues();
String[] s = new String[l.size()];
Iterator it = l.iterator();
for (int i = 0; it.hasNext(); i++)
s[i] = it.next().toString();
possibleColors = s;
catch (P13nControlException ex)
ex.printStackTrace();
possibleColors = new String[0];
return possibleColors;
/** Get the user's favorite color from their profile.
public String getUsersColor()
try
ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
return profileControl.getProperty(profile, "GeneralInfo", "FavoriteColor").toString();
catch (P13nControlException ex)
ex.printStackTrace();
return null;
// Uncomment this declaration to access Global.app.
// protected global.Global globalApp;
// For an example of page flow exception handling see the example "catch" and "exception-handler"
// annotations in {project}/WEB-INF/src/global/Global.app
* This method represents the point of entry into the pageflow
* @jpf:action
* @jpf:forward name="success" path="index.jsp"
protected Forward begin()
return new Forward("success");
* @jpf:action
* @jpf:forward name="success" path="begin.do"
protected Forward setColor(ColorFormBean form)
// set the color in the user's profile
try
ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
profileControl.setProperty(profile, "GeneralInfo", "FavoriteColor", form.getColor());
catch (P13nControlException ex)
ex.printStackTrace();
return new Forward("success");
* FormData get and set methods may be overwritten by the Form Bean editor.
public static class ColorFormBean extends FormData
private String color;
public void setColor(String color)
this.color = color;
public String getColor()
return this.color;
[GeneralInfo.usr]
[att1.html]

MegaRadio in restricted user mode

Similar Messages

Maybe you are looking for