Megastick: Track resume after power off / power on??

I'm thinking about buying the megastick 256MB but I've got one question about it.
I'm playing a track and switch off the stick. Then I switch the stick back on and start listening again. Will the stick start playing at the position of the track when I switched it off, or will it start at the beginning of the track? For example: I'm listening to a one hour dancemix and after 15 minutes I switch of the stick. Will the track resume at the point were I was when I switched of (15th minute), or will it start at the beginning of the track??

Well, according to the FAQ, the megastick does not support this function. Whether or not this function would be implemented is yet to be seen. Frankly, I own the megastick 128 and I must say that for its price, it's a pretty decent mp3 player with good sound quality BUT do not expect too much. If you have extra cash to spend, go for mp3 players from iRiver or iAudio. Those mp3 players support custom EQ, time elapsed, folder browsing and they use AA batteries as well which last longer. To get more info, go to http://www.cnet.com and search for them.

Similar Messages

  • Resume after power-off on MuVo TX

    Do any of the MuVo players have the capability to resume where you left off while playing? I often listen to podcasts and large audiobooks, and my current player (Lexar JumGear MP3) always starts at the beginning of an audio file when it is turned on, and this is inconvenient when you're in the middle of a hour podcast or 4 hour audiobook! I am looking to buy a flash player that has a resume capability, and wanted to research this feature first, after missing out on my first go-around! Specifically, I am looking at the MuVo TX FM (256MB), due to it's low price.Message Edited by fmagic on 07-24-2005 09:05 AMMessage Edited by fmagic on 07-24-2005 09:05 AM

    Well, according to the FAQ, the megastick does not support this function. Whether or not this function would be implemented is yet to be seen. Frankly, I own the megastick 128 and I must say that for its price, it's a pretty decent mp3 player with good sound quality BUT do not expect too much. If you have extra cash to spend, go for mp3 players from iRiver or iAudio. Those mp3 players support custom EQ, time elapsed, folder browsing and they use AA batteries as well which last longer. To get more info, go to http://www.cnet.com and search for them.

  • Canon 60D does not resume after auto power off

    My Canon 60D does not resume after auto power off. It shows the empty battery icon when I press the shutter button, even the battey is fully charged. If I remove the battery and insert back it will resume to work. Any one had the same experience and know how to resolve it?

    The power switch is actually a "software" switch.  It's not like a light switch in that it doesn't actually provide or deprive the camera of power... only removing the battery will deprive the camera of power.  This is why it doesn't actually just go dark when you switch off power... instead you'll usually see it perform a sensor clean cycle and then power down.  The camera is technically in a kind of "sleep" mode monitoring the switch.  If a Canon camera ever seems to lock up and ignore all input, the battery should be temporarily removed to "reboot" the camera.   There is no "setting" in a camera that can configure it to ignore buttons.   Although... if the camera is in an automatic mode, some input is deliberately ignored to make it easier to use the camera.  Put the mode dial in a "creative zone" mode (P, Tv, Av, or M) and all buttons and menus should be accessible. You might try connecting the camera via USB cable to your computer and then attempt to control the camera via the Canon EOS Utility to see if that works.  If the camera responds fine to the computer control, then likely the camera's main board and circuits are working fine and it may just be a wiring problem -- as if some cable simply isn't getting a very solid connection.  If this is a wiring issue, you are probably better off sending it in for service.  

  • My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers?

    My bookmarks are lost after turning off the computer unexpectedly (power problem),how can it recovers？ Thanks a lot !!!!
    我的书签在电脑突然被断电之后全部丢失了，我该怎么办呢？？谢谢啦！！~~~~

    This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
    * http://kb.mozillazine.org/Lost_bookmarks

  • C871 default config after power off - bad nvram?

    <p>Hello,</p>
    <p>I have new C871 with default configuration. after reconfiguring and reload, my config is loaded from nvram. But after power off, is there default configuration. What's wrong? config register is set to 0x2102 (that's ok).</p>
    <p>any ideas?</p>
    <p>thanks,<br />
    martin</p>

    I found the reason - construction 'bug'. reset button was always presset.

  • IPad WEP password required after power off.

    Hi,
    On my ipad mini I am required to re-enter my WEP password after power off.
    Why is this and how do I prevent it from happening?
    This does not occur on my mbp or iphone 4s.
    Thanks,
    Rob.

    Although it should work flawlessly, for some reason mobile devices don't always play nice with WEP.  You're far better off  with WPA2 (security-wise)  anyway.  If you have the ability to change your network's security, it might be easier to just get away from WEP than to try to make your mini work with it.

  • Mail gave error message, failure to move e-mail to trash can.  Mail has frozen and will not quit and is stopping a machine shutdown.  Problem persisted even after power was trend off for a minute.

    Mail gave error message, failure to move e-mail to trash can.  Mail has frozen and will not quit and is stopping a machine shutdown.  Problem persisted even after power was trend off for a minute.Iideas please

    OS X: How to quit an unresponsive application using Force Quit
    Back up all data. Rebuild the mailbox. Try to delete the message again.

  • Cannot establish wireless connection with WRT54G after power-off

    My WRT54G (firmware v7.00.0) is connected to cable TV modem and
    usually the wireless connection works fine, but after swiching off and later
    on the power to WRT54G a laptop cannot establish WiFi connection to internet.
    I can see in Odyssey software (for wireless communication) that my laptop
    found the right network (SSID) but in status it says 'waiting for keys'.
    I use WPA2 (TKIP). The laptop does not connect to internet.
    When I connect it by cable (ethernet) the internet works fine, I have noticed
    that by accessing the web-page utility of the router and simply clicking
    save changes on wireless-settings page (without making any changes in
    the settings) my laptop instantly establishes wireles connection and
    everything works fine till next power swich-off.

    Thanks for reply! I have my network in preffered, and the software/laptop locks on
    the network (see it, says it have excellent signal strenght) and gives note
    'waiting for keys' (the WPA2 encription key is in the settings - both of router and laptop client - Odyssey).
    I've got firmware ver.7 so it is probably the latest.

  • No power after turning off and plugging into a new functioning outlet.

    No power after turning off and plugging into a new functioning outlet

    Perhaps corruption of the Energy Saver settings...
    Reset the PRAM cannot hurt.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Excerpt from http://support.apple.com/kb/ht1379

  • HT4623 Hello! Answer Why do not open pictures after power-off at iphone 3? Thank you!

    Hello! Answer Why do not open pictures after power-off at iphone 3G? Thank you!

    This problem is already two years.

  • HP 6940: carriage stuck at left side, resume and power lights flashing

    I've used this printer under ubuntu/linux for about 2-1/2 years. Color printing has always been a challenge, I get about one usable page per 5 test pages. About a year ago, it stopped printing; hp-info (part of the hplip package) said the color cartridge was defective. I was able to get black&white printing by removing the color cartridge.
    This week, I had to print some stuff in color. I pulled the color cartridge out of its ziplock, re-installed it, and ran a quick cleaning. A test print showed that wasn't enough, and I ran a full cleaning, after which I was able to print a good test page, and then one page of my job.
    When I tried to print the second page, nothing happened, and the resume and power lights started flashing. I cycled power on the printer (I have to do this very frequently, even for black and white jobs), but it didn't fix the problem. I pushed resume, but no dice. I pulled the back cover to check for paper jams: nothing jammed. Replaced the back cover, pulled the paper from the tray: nothing jammed. Replaced the paper in the tray. Pushed resume again: it made noise, but didn't clear the problem.
    I opened the lid, and the carriage was all the way to the left-hand side. Pushed resume: a small plate in the loading dock at the right-hand side moved forward and then back, but the carriage stayed at the left-hand side. Tried (gently) to move it to the right, but it's firmly in position.
    hp-info now says:
    "status-desc                   Paper or cartridge carriage jammed"
    The color cartridge is an HP cartridge, and came with the printer. The paper is HP paper.
    Any suggestions?

    Hello there! Welcome to the forums @roberts460 
    I would suggest checking out the guide below for troubleshooting blinking lights to try and help resolve the issue you're having with your Deskjet 460c.
    Blinking Lights on the HP Deskjet 460 and Officejet H470 Mobile Printer Series
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Mac won't boot after power chord became unplugged accidently.

    Mac won't boot after power chord became unplugged accidently.
    I have a Mac Mini running very latest version of OSX. I was making a recording with QuickTime; when I needed to plug in a USB recording device into the back of the Mac Mini, as I pulled the Mac off my shelf to do this, the power cable came out and the Mac lost power.
    I plugged it back in and powered up the Mac. I get the grey screen with Apple logo and the spinning grey wheel; then it goes to a blue screen (as usual) and I get the "starting OSX..." progress bar. When the progress bar finishes, I'm left with a blue screen only, no dock, no apple icon at top left, nothing across the top, no nothing.
    So far, I've booted from the original disc and repaired the permissions as well as the disc, then re-booted, but same old blue screen.
    I have another iMac G5 machine, so is there any way I can at least retrieve the important HD files from the Mac Mini to my G5, before throwing the broken Mac Mini away?
    Can anyone advise please?

    Hi, Nigel.
    Not to differ with my colleagues here, but there's an important question that wasn't asked.
    1. You wrote: "So far, I've booted from the original disc and repaired the permissions as well as the disc, then re-booted, but same old blue screen."Did Disk Utility report any errors it could not fix when you ran Repair Disk? I suggest you run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
    2. You may also want to run the Apple Hardware Test that came with your Mini to be sure nothing shorted when the power cable was removed from the computer. I've seen it happen, hence I usually recommend removing the power cable at the wall before disconnecting the power cable from the computer. See my "Apple Hardware Test" FAQ.
    3. Repair Disk gives your Mini a clean bill of health, the blue screen may be the result of some Startup or Login item that was corrupted due to the sudden power outage. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem and may help you avoid and Archive and Install.
    4. If you elect to go the Archive and Install route, see my "General advice on performing an Archive and Install" FAQ for some important tips on this process.
    5. As FYI, this is the kind of problem that makes one glad they've implemented a comprehensive backup and recovery solution. For advice on the backup and recovery solution I employ, see my "Backup and Recovery" FAQ. Computing without a comprehensive backup and recovery solution is like driving without auto insurance.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • How to configure V240 auto-boot after power failure?

    Hi!
    How to configure automatic boot of V240 machine after power failure? After power gets resored, V240 remains in standby mode and one has to press button on front to power it up. It is not convinient because power failure can occur, for example, at night and the machine is not booted until the first user awakens :)

    Uhh... I've found publicly accessible document http://docs.sun.com/source/817-5481-11/variables.html :
    Looks like this variable controls auto-power-up behaviour:
    sc_powerstatememory
    The sc_powerstatememory variable enables you to specify the state of the host server as false (keep the host server off) or true (return the server to the state it was in when the power was removed). This is useful in the event of a power failure, or if you physically move the server to a different location.
    For example, if the host server is running when power is lost and the sc_powerstatememory variable is set to false, the host server remains off when power is restored. If the sc_powerstatememory variable is set to true, the host server restarts when the power is restored.
    The values for this variable are as follows.
    true - "Remembers" the state of the host server when power was removed and returns the server to that state when power is reapplied.
    false - Keeps the server off when power is applied.

  • HT1423 after power interruption -all my folders went back with 3 years dates, jow do i return lost files?

    after power interruption -all my folders went back with 3 years dates, How do i return lost files?

    Malachi1234 wrote:
    all my folders went back with 3 years dates
    On what exactly? Your computer?
    Do you have a backup off the machine that's stable?
    Now your files are still likely there, it's just a naming issue or a PRAM/SMC problem for power and a cache corruption issue for the files.
    If you don't have a backup of your files, copy everything you can to a external storage drive and disconnect it.
    Next run trhough this list of fixes, I suspect the SMC/PRAM reset will help with the power issues and the #12 OnyX cache cleaning routine will set your folders right.
    Remmeber after the PRAM reset to set your time and date correctly. Pehaps that is what s throwing off the date on the folders?
    It's really hard to figure your problem out with the information provided.
    https://discussions.apple.com/docs/DOC-3353
    Again your files are likely very much still on the drive, you can recvoer anything as long as it hasn't be secure erased or overwritten by new data yet
    Create a data recovery, undelete boot drive

  • Distorted sound after power is suspended on IBM Thinkpad with XP

    I am experiencing a problem with itunes on my IBM thinkpad with windows XP. After power is suspended, songs are distorted, the sound seems to be warbling. After I restart XP things are fine again until I suspend power, the problem returns. Any suggestions?

    Thanks hausman, as mention in early mail, I not good at all on computer. To be frank in my country Lenovo only know how to sell thinkpad and no service, when I requested to buy the recovery CD when bought X61 they said none and never heard of,  which in my opinion they should not said that, after all I want to buy not ask for free, thus I think that the main reason why in my country not much people using thinkpad because basically no service only want to sell. The reason I'm still buying thinkpad because of track point mouse, if other brand have mouse same like trackpoint, I will definitely buy it, have try HP but the track point mouse not as good as track point. I will definitely will buy the recovery CD once I'm in Singapore 9plan mid Nov 09) as I believe Lenovo Singapore service is much more better when compare to my country Lenovo. Thanks again

Maybe you are looking for

  • Goods are sent back to the vendor once the Credit is taken and Utilized

    Goods are sent back to the vendor once the Credit is taken and Utilized( Declared to Authorities) Hi, I have a scenario in which the inpur credit is taken at the time of the creation of the GR. The Credit is declared to the authorities on a monthly b

  • Upload vendor master with multiple phone numbers through LSMW

    Hi, I am trying to upload vendor master data with multiple telephone numbers. I am using BAPI BUS4001 , method SAVEREPLICA . It has allow me add only phone number. Is there any workout to short out this issue? Thanks in advance. Regrads, Suresh Yerra

  • Help required for Excel Pivot.

    Given below my data table with sample data.   I have a requirement to create a pivot template as shown below. Data should be displayed group by Year and Allowance name. For each year, I have to get the sum of points earned by each allowance and the b

  • Copying the background job

    Hi, I have a background job with has a start condition after execution of a particular event. Now i need to copy this background job to another name and execute it. I tried using the function module BP_JOB_COPY, but that copied the background job wit

  • Anyone thinking of OPS on LINUX

    Well, Gentle people, If you are interested in the above topic (for work not for fun ...ok !) Email me . Trying to figure out they are people looking for this ...yet !